Used Bano Mac for sale (23,357)

Condition: used, machine/vehicle number: 008012, Overall length: 6600 mm Overall width: 2150 mm Loading compartment length: 2900 mm Loading compartment width: 1400 mm Dksdpfjy Nkqlex Ad Nsl Cutting shaft power: 37 KW

Condition: not inspected (used), functionality: unexamined, total length: 6,600 mm, total height: 2,550 mm, total width: 2,150 mm, power: 48 kW (65.26 HP), TECHNICAL DETAILS Filling area length: 2,900 mm Filling area width: 1,400 mm MACHINE DETAILS Dimensions Overall length: 6,600 mm Overall width: 2,150 mm Dksdpeyq Izijfx Ad Nsl Overall height: 2,550 mm Motor power of cutting shaft: 37 kW Total connected load: 48 kW The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial files of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 8012

Year of construction: 1999, condition: like new (used), Rotor 600mm Dksdpfxjh Nrcae Ad Nol 18 teeth Chute 600 x 750mm 15kW engine Hydraulic pressure

Condition: good (used), functionality: fully functional, automatic unloading from stand Djdpfxoy N N R Re Ad Nokl total length 4,5m arm length 100cm two columns total power 5kW

Condition: used, Year of construction: 2008, functionality: fully functional, Well-maintained used machine from a screw factory - Horizontal end machining center for simultaneous double-sided end machining of shaft-shaped parts For further information, please inquire. Djdewt Upmjpfx Ad Nokl

Condition: new, shaft diameter: 60 mm, – Shaft diameter 60 mm – The lower two rollers are hydraulically adjusted – Usable in horizontal/vertical position – Three driven rolls – NC control (7-inch touchscreen) – 2 speeds – Brake motor – Overload protection system Dkjdpfoyh R Hasx Ad Nsl – Roller diameter Ø177 mm – Emergency stop – Documentation – 400V

Condition: used, Year of construction: 2003, Plastic Recycling Mill Manufacturer: REG-MAC Italy Type: R100/75/V Djdpfxowav Hmj Ad Nskl Engine Power: 75 kW Weight: 1850 kg Year of Manufacture: 2003 Technical Condition: Used

Condition: new, Spindle speed 9000rpm, Spindle motor 4kw, Cutter cycle motor 0.75kw, Maximum tenon width 100+2RMmm Maximum tenon thickness 30mm Maximum tenon depth (shoulder) 50mm Table tilt upwards 0-15 degrees Table tilt downward 0-30 degrees Table tilt side 0-20 degrees Table fence adjustable 90 to 45 degrees Pneumatic adjustable work place clamps x 2 PLC operation TCT disposable tip cutter block Overall dimensions 1300 x 1200 x 1600mm Weight 950kg Dsdon Nwdlopfx Ad Nskl

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, power: 24 kW (32.63 HP), pressure (max.): 120 bar, TECHNICAL DETAILS Minimum dimensions for double-sided machining: Diameter 12 mm, Length 200 mm Maximum dimensions for double-sided machining: Diameter 50 mm, Length 800 mm Minimum dimensions for single-sided machining: Diameter 12 mm, Length 75 mm Maximum dimensions for single-sided machining: Diameter 70 mm, Length 500 mm Djdpfx Aoxxkd Isd Nekl Cutter diameter: max. 140 mm Tool holder: SK40 Workpiece clamping: Hydraulic centering vice MACHINE DETAILS Performance Data Power: 24 kW Voltage: 400 V Frequency: 50 Hz Max. pressure: max. 120 bar EQUIPMENT Horizontal end machining center Simultaneous double-sided end machining of shaft-shaped parts

Condition: good (used), Permanent magnet motor, permanent magnet motor, electric motor, n-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm Dsdpforqipnsx Ad Njkl -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

Condition: used, Year of construction: 1997, total length: 1,000 mm, total height: 1,340 mm, total width: 1,350 mm, Colour: Grey Empty weight: 750 kg Dkedpfx Aowh I U Eod Nel - Year: 1997 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 13 - Opening width [mm]: 640 - Opening length [mm]: 450 - Transport dimensions: 1000mm x 1350mm x 1340mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-A-0/S001 permanent magnet three-phase servo motor, serial no. as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Please ask for price separately! Dkedpfxoi D Ihue Ad Nol

Condition: new, Fanuc A02B-0259-C241 # A HANDY MAC OPE PANE SN:P002780 ,unused, 100% functional, scope of delivery according to photos Djdpji D Uvmofx Ad Njkl

Condition: ready for operation (used), Indramat MAC 090A-0-ZD-4C/110-B-1/WI522LV Permanent Magnet Motor, serial no. as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Price please ask separately! Dedpfoi D Ihqjx Ad Njkl

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet - three-phase servo motor, SN:68352, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,For this item, the agreed sales discounts do not apply. Price please enquire separately!,ATTENTION: Costs for packing and shipping please enquire separately! ATTENTION: Please enquire for charges for packing and transport separately! Dkjdpfx Aei D Ii Isd Nsl

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-B-0/S001 permanent magnet three-phase servo motor, serial no. according to photo, used, strong traces of use, 100% functional, scope of delivery according to photos Dkodpfx Adji D Ih As Nsl

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 SN: 68351 Permanent magnet three-phase servo motor, hole spacing of the mounting holes: 152x152 mm, drive shaft diameter: 32 mm, used, normal signs of use, 100% functional, shipping costs please inquire separately! Please ask for transport charges! Dodpfxji D Ii De Ad Nskl

Condition: new, Indramat MAC112B-0-GD-3-F/130-A-0/S0054 Permanent Magnet Motor , S.No. MAC112-80864, unused in opened original box, 100% working ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Dkjdpfxoi D Ip Ro Ad Nel

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0 permanent magnet three-phase servo motor, SN:35588 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos,The agreed sales discounts do not apply to this item. Price please ask separately! Dksdpei D Ig Ejfx Ad Nel

Condition: ready for operation (used), Indramat MAC 112D-0-FG-3-F/180-A-0/S011 Servo motor SN:71378 ,used, strong traces of use, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dsdpei D Ikaefx Ad Nokl

Condition: good (used), Year of construction: 2005, The machine has received annual maintenance under a service contract with Okuma. Okuma Mac Turn 550 W / 9-axis Turning-Milling Center Year of manufacture: 2005 Control: OSP-E 100 L / extension kit “M”, One Touch IGF kit Milling spindle slide: X/Y/Z/B axes Sub-spindle W axis Main spindle with C axis Sub-spindle with C axis Lower turret slide X/Z axes Max. turning diameter: 720 mm Turning length: 2,000 mm Distance between tailstock tip and spindle nose: 2,505 mm Y-axis travel: 250 mm (+/- 125 mm) Main spindle speed: up to 3,500 rpm Spindle power: 30 kW Lower turret: 12 stations without driven tool stations Lower turret with steady rest, thus only 9 stations instead of 12 Self-centering steady rest: 35 - 240 mm Milling spindle continuous B axis: 0.001° Tool magazine: 80 stations HSK 100 tool interface New Forkhardt 3-jaw chuck Ø 400 mm (value: €12,000) Sub-spindle without chuck, currently equipped with mandrel / supplied without mandrel Enlarged main spindle bore 110 mm (Ø 150/110 mm) Spindle nose size 11 2-stage clamping pressure Sub-spindle as hollow shaft motor, speed up to 3,800 rpm Ethernet LAN interface Renishaw in-process measurement Additional measurement system on Y axis Tool length 450 mm instead of 350 mm Door automation on both doors Chip conveyor Gravity band filter with clean tank, 900 liters Frequency-controlled supply pump, up to 20 bar Dsdpjyt Nvtefx Ad Nokl The machine has received annual maintenance through a service contract with Okuma. In 2023, the cable drag chain of the W axis, including all hoses, was replaced. In October 2024, the linear guides for X/Y/Z were replaced. Work performed by Okuma: - Machine cleaned - Sheetmetal parts and covers dismantled - 8th axis dismantled - Traveling column dismantled and removed from the machine - ATC removed and taken out of the machine - All linear guides removed - Mounting surfaces of the ZA axis cleaned - New linear guide ZA including carriages installed and tightened to spec - New ball screw ZA including bearings mounted and fitted - Baseplate of the traveling column installed and bolted to spec, carriages fastened, lubrication lines connected - ATC and auxiliary parts reinstalled and connected - New YA and XA linear guides installed and tightened to spec, new YA ball screw with bearings installed - Traveling column set in place and lubrication lines connected, XA baseplate installed and aligned - 8th axis installed and aligned - H1 turret installed - 8th axis drive motor installed - Install 8th axis and new H1, set up geometry - Function test 8th axis and H1 - Run-in program for B axis, approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and prepare defect report for OEG - Left door installed, various sheetmetal parts adjusted - Chuck installed - Adjust zero points - Check tool change

Condition: ready for operation (used), Year of construction: 2011, spindle motor power: 22,000 W, spindle speed (max.): 3,800 rpm, travel distance X-axis: 1,670 mm, travel distance Y-axis: 505 mm, travel distance Z-axis: 190 mm, total height: 2,950 mm, total width: 2,960 mm, overall weight: 13,700 kg, product length (max.): 5,110 mm, number of axes: 9, This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a distance between centers of 1500 mm. The machine is equipped with a powerful main spindle and sub-spindle, both capable of 3800 rpm, and a milling spindle speed of 12,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill centre we have for sale. Contact us for further details. • Control unit: OKUMA OSP P200L-H • Included control options: Collision Avoidance System (CAS), One Touch IGF, Helical Interpolation • Distance between centers: 1500 mm • Max swing diameter over covers: 550 mm • Max turning diameter: 550 mm • Bar capacity: 75 mm • Main spindle: • Attachment: ASA 8" Big Bore • Sub-spindle: • Attachment: ASA 8 Super Big Bore • Speed: 3800 rpm • Power: 22/15 kW • Milling spindle: Dedpsy Ddiwefx Ad Nekl • Taper: HSK A63 • Speed: 12,000 rpm • Power: 11 kW • Tooling: • Tool magazine: 44 positions • Lower turret: 12 positions with motorized tools • Axes: • Axis travels: 1670 mm / 1655 mm; 505 mm / 210 mm; 190 mm • B-axis: Continuous 210° • C-axis: 360,000 divisions • Coolant/pump pressure: 15 bar • Working hours (as provided): • 30870: 8:15 • 13909:49:34 • 6594: 8:59 • 9497:37:03 Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma Mac Turn 350 W, year of manufacture 2004, OSP-E 100L, 80-position tool magazine, main spindle with C axis, sub spindle with C axis, Y-axis upper slide/milling spindle, HSK 63 tool holder, infinitely variable B axis as milling spindle, center distance 1500 mm, spindle bore 80 mm, max. swing diameter 550 mm, turning diameter 350 mm, lower turret with 12 stations and driven tools, Interlite compact filter system 900 l, extraction system, spindle operating hours approx. 18,300 h, chip conveyor, tool changer gripper arm completely renewed, high-pressure cooling, tool measuring arm, tool changer overhauled, main spindle Kitagawa B - 210, sub spindle Kitagawa B - 208. Dksdpfxoy Atu Te Ad Njl

Condition: good (used), machine/vehicle number: 75804, Welding current range AC Tig: 7 - 390 A Welding current range direct current Tig: 6 - 230 A Dedpfxeb Nv Iro Ad Nekl Electr. connection: 380 V, 45 A space requirement: 1100 x 600 x 1370 mm

Condition: new, Year of construction: 2025, Mac 16 premium low loader    • High-speed axles (10 tons each)    • Air brakes (WABCO EBS + ACR)    • Twin air tyres 235/75/17.5    • Hydraulic ramps    • Flat floor 4900 x 2550 mm    • Sloped floor 1500 x 2550 mm    • 50 mm towing eye, height 520 mm    • Hydraulic support leg    • LED lighting    • Storage box Dksdeytdbqopfx Ad Nol    • COC documents    • License plate registration Condition: New Year of manufacture: 2025