Used Bavelloni Straight-Line Vertical Edging Machine for sale (72,002)

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Pre-Auction Offers Considered Bodpfxjzr Iwre Afwodg Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 7,800 mm, Bavelloni Straight Line Edger Model: VE500 11 11 Spindle Excellent condition Bsdpfx Asydc I Defwodg Delivery and Installation available

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) Bdjdpfx Afsztazfjwjg HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition Bedpfx Asw H Rzxefwedg – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! Bdsdpfx Aey Ur Hljfwsg The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. Bdodpfxjv Eguye Afwsg In very good working condition. Available: March / April 2025.

Condition: new, Year of construction: 2022, Bavelloni VDM1636 series vertical milling and drilling machine. + additional options : - pre-setting of drill bits , whetting , - Barcode reader , - additional Camnay office software. VDM 1636 CN is an NC vertical milling and drilling machine designed to automatically perform complex drilling and milling cycles. Equipped with one double drilling head (1 + 1 opposite spindles), each equipped with a rotary storage tool (8 positions each). The machine, characterized by great ease of operation, has been designed in accordance with the most advanced technical solutions to ensure extremely high accuracy in work. The dual rotary tool storage with 8 positions allows drilling, countersinking and milling at a single workstation. Easy to use, fast and precise in execution thanks to the technological solutions used: 5.5 kW spindles, spindle movements with ball guides, latest generation NC brushless motors with easy and intuitive software Possible work In one automatic cycle, the VDM 1636 CN can process the following operations: - Drilling - Countersinking - Milling - Cutting out Holes can be made at any point on the glass surface. The new control console used in the VDM1636 milling and drilling machine combines all the advantages of numerical control. This interface can work in a network with other machines . It can also be connected to the BAVELLONI network, so that the manufacturer's remote service is possible. The main features of this system are: - Programming while the program controls the movements of the machine, the operator can easily work on the computer. Bdsdpfx Afotui R Djwjg - Simple and direct graphical interface. - Data transfer via commercially available tools . VDM 1636 CN is equipped with one of the most advanced software systems (CAD / CAM) specifically designed for glass processing by numerically controlled machining centers is unique in performance, reliability and ease of use, thanks to the use of state-of-the-art technical solutions

Condition: used, Year of construction: 2016, functionality: fully functional, We present a fully automatic EDGEBANDING LINE for sale! The line can be inspected in production at any time and is available immediately! HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL330/9/A3/WZ, year 2013 HOMAG FEEDING TABLE FLEXLINE PROFI TBL100/20/30/F, year 2013 HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL370/8/A3/WZ, year 2016 HOMAG DOUBLE ANGULAR TRANSFER CROSSWISE POWER TWL410/25/LQ, year 2016 PROFI KAL330 - Free Space Jointing Trimming Unit - Gluing Part A3 Basic - Free Space Processing Units - Finishing Unit FA11 Workpiece and edge parameters: - Workpiece width without edge min: in case of workpiece 60 mm* Thickness 12-22 mm in case of workpiece Thickness 23-60 mm 100 mm* *depends on the workpiece length. - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm Thickness - Edging material on coil 0,3-3 mm - Edging mat. cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter 830 mm PROFI TBL100/20/30/F Fixed stop side on the left - incl. transport rollers - roller diameter 54 mm - roller distance approx. 60 mm - incl. lateral conveyor belt - electro pneumatically controlled crosswise fence - adjustable infeed fence, manually via counter - incl. kit for small parts - incl. integrated air cushion table Workpiece parameters: - Panel length: min. 240 mm/ max. 2500 mm - Panel width: min. 120 mm/ max. (TBL../20/30) 3000 mm PROFI KAL370 - Free space Jointing Trimming unit - Gluing part A3 basic - Free space processing units - Finishing unit FA21 Workpiece and edge parameters: Workpiece width without edge min: in case of workpiece 60 mm* (thickness 12-22 mm) Bodpsy Thlzofx Afwjdg in case of workpiece 100 mm* (thickness 23-60 m) *depends on the workpiece length - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm thickness - Edging material on coil 0,3-3 mm - Edging mat.cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter max. ¦ 830 mm POWER TWL410/25/LQ - Fixed stop side infeed: left, outfeed: left - Roller diameter 64 mm - Roller distance 110 mm - Infeed roller track with belt conveyor and cross transport - Cross conveyor belt controlled - Outfeed roller track - Cross conveyor belt controlled - Stop fence electro pneumatically controlled - Transport belt lateral - Modification of panel overhang manually adjustable Workpiece parameters: - Panel length min. 240 mm/ max. (TDL../25/..) 2500 mm - Panel width min. 240 mm - Panel thickness min. 8 mm/ max. 60 mm - Panel weight max. 80 kg

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels Bjdpfx Aoxw Rcuofwodg - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Bsdpfxoif Sg Ss Afwsdg Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Bdedpfx Afjtgvgpewog Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Spindle BT 30 Spindle 3hp Bdodpfxszu Ni Uj Afwsg 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Bedpfxjzt H Raj Afwedg Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Bjdpezi Awhsfx Afwjdg Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. Bdjdpeq Nd U Hsfx Afwsg 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Bdsdpfx Afjyh Hc Rswsg

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control unit (PCU 50) was replaced in March 2024! The machine spindle was replaced at approximately 5,500 operating hours! Tools are included in the offer! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control unit: Siemens 840 D Operating hours Control unit operating hours: 60,150 h Machine operating hours: 56,860 h Bdsdpszvl Tfofx Afwjg Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling 20 bar with double switching filter Documentation Hedelius + Siemens Sinumerik Infrared probe Renishaw Note: The sale does not include the milling attachments on the rear panel of the machine. Since the machine has been demonstrated several times, the machine operating hours may vary slightly.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Bsdpfezqunhsx Afwsdg Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between September 21st and October 1st! Bdedpfxszqunus Afwsg TECHNICAL DETAILS Travel in X-axis: 1,350 mm Travel in Y-axis: 620 mm Travel in Z-axis: 810 mm Feed rate and rapid traverse Feed rate X/Y/Z-axis: 15 m/min Rapid traverse X/Y/Z-axis: 30 m/min Spindle Spindle speed: 12,000 rpm Spindle drive power: 10 kW (100% ED) Spindle drive power: 12 kW (40% ED) Spindle mounting: ISO 40 Spindle bearing diameter (front): 70 mm Spindle bearing diameter (rear): 60 mm Spindle operating hours: 6,510 h Distance from spindle to table: 90 – 900 mm Distance from spindle center to machine frame: 655 mm Tool magazine Tool magazine capacity: 40 Max. tool length: 300 mm Max. tool diameter with occupied neighboring positions: 80 mm Max. tool diameter with free neighboring position: 125 mm Work table Table length: 1,550 mm Table width: 620 mm Number of table slots: 6 Control system Control system manufacturer: HEIDENHAIN Control system model: iTNC 530 MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 63 A Rated apparent power: 35 kVA Dimensions and weight Overall length: 7,000 mm Overall width: 2,700 mm Overall height: 2,900 mm Machine weight: 8,650 kg EQUIPMENT - Dividing head, 4th and 5th axis, manufacturer WALTER, type TANIH 200 - LANG 5-axis clamping system - RENISHAW measuring probe - Chip conveyor - Documentation and manuals External reference: Wahl - Lot 69 Note: without the machine vice located on the clamping surface.

Condition: used, machine/vehicle number: 008700, X axis working area: 3050 mm Y axis working area: 1300 mm Main Electrospindle power: 7.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 52 Bdedozq Ur Hjpfx Afweg Total number of tool changer positions: 6

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Bdedpowuclxofx Afwog Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: good (used), Year of construction: 1976, max. wheel diameter 1250 mm gear width 1000 mm max. module 16 shifting 250 mm milling spindle speeds (infinitely variable) 32 - 200 U/min min. number of teeth 12 table hole 255 mm total power requirement 32 kW Bdedezr Rpkopfx Afwog weight of the machine ca. 20 t dimensions of the machine ca. 5,1 x 3,2 x 3,7 m Top condition! 2 cut cycle, change gears, arbors, chip conveyor. Following hob arbors are with the machine: Diameter: 32 , 40 , 50 , 60 mm

Condition: good (used), Year of construction: 1976, max. wheel diameter 2300 mm gear width 1000 mm max. module 22 Bdjdpszr Rpdofx Afwsg min. module 1 total power requirement 45 kW weight of the machine ca. 22 t dimensions of the machine ca. 5x3x4 m

Condition: like new (used), Year of construction: 2006, operating hours: 9,039 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. Bdjdpfszxz Dfsx Afweg The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2009, Haas VF-2CDE CNC Vertical Machining Centre with Haas CNC Control. S/No. 1075853 (11/2009), Table size 415mm x 355mm, 20 Tool ATC, BT40 Spindle, Swarf Argur with Rotary Table Brushless Converter for use with 4th Axis. Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Bdjdszx Axwopfx Afwjg