Used Bd Max for sale (25,089)

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Codpfjy Iyw Sox Adrsrh

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 Crsdpfxjy D I I Ro Adreh 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: used, This listing for a 1 of 2 BD Max PCR Machine BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. Codpfx Aexzgw Ajdrorh The BD MAX System is capable of: Independent nucleic acid extraction and purification with built in extractor. PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample Electrical Requirements 100 to 240 V, 50/60 Hz, 10 A, 300 VA Max Dimensions: Weight 250 lb. Depth 28.5 in. Height 37 in. Width 29.7 in.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,200 h, functionality: fully functional, machine/vehicle number: 09-0302, For Sale: Massey Ferguson 7726 S + MUS-MAX WT9XLZ Wood Chipper Package price: EUR 115,000 (excl. VAT) 🚜 Massey Ferguson 7726 • Year of manufacture: 2018 • Engine hours: 9170 (A complete engine overhaul was carried out approximately 3,000 operating hours ago.) • Price: EUR 70,000 (excl. VAT) • Power: 255 hp nominal / 280 hp max • Front linkage Crodpfey Sgmbox Adreh • Front axle suspension • Pneumatic suspension operator seat (360°) • Regular maintenance • Engine oil changed every 250 hours • Transmission: Dyna-6, 50 km/h • LS pump capacity: 200 l/min • 4 double-acting hydraulic outlets with mechanical control • Rear fender lift controls • Electronic linkage control (ELC) with 9,950 kg lifting capacity • PTO: 540 / 1000 rpm • Air brake system for trailer • MF tires: 55% tread remaining. MUS-MAX WT9XLZ • Year of manufacture: 2009 • Worn parts replaced regularly • New tires • Tower-mounted camera • Additional LED lighting • MUS-MAX tires: 95% tread remaining. • Fully operational – still in active use

Condition: excellent (used), Year of construction: 2019, operating hours: 174 h, functionality: fully functional, working width: 510 mm, area performance: 2,805 m²/h, warranty duration: 12 months, tank capacity: 40 l, total height: 1,316 mm, total width: 691 mm, total length: 1,118 mm, water tank capacity: 40 l, noise level: 60 dB, We offer for sale a Rydwan BD 50/40 RS Bp Battery-Powered Scrubber Dryer. Condition: Very good Year of manufacture: 2019 Operating hours: 174 rbh The machine is in excellent condition both visually and technically. It has undergone a comprehensive, detailed refurbishment, making it fully functional and ready for immediate use. All machines offered by us are presented in genuine photographs — you purchase exactly the machine shown in the pictures. All equipment purchased from us comes with a 12-month WARRANTY. Technical Specifications: • Power source: Battery-powered • Drive: Traction motor • Working width (brushes): 510 mm • Working width / vacuuming: 691 mm • Clean/dirty water tank capacity: 40 / 40 l • Theoretical area coverage: 2,805 m²/h • Practical area coverage: 2,000 m²/h • Battery type: Maintenance-free • Battery voltage/capacity: 36 / 76 V / Ah • Maximum battery run time: 2.5 h • Charger supply: 230 V / 50–60 Hz • Brush rotation speed: 180 rpm • Brush pressure: 20 / 26 g/cm² / kg • Water consumption: 1.5 l/min • Acoustic pressure level: 60 dB(A) • Rated power: max. 1,080 W • Permissible total weight: 330 kg • Dimensions (L x W x H): 1,118 x 691 x 1,316 mm Cedpfow Icz Ejx Adrorh Set includes: - New batteries - New disk brush - New squeegee blades - New protective rubber skirting

Condition: like new (used), spindle diameter 35 mm 5 speeds from 3,000 to 10,000 rpm motor power 5.5 kW Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale worktable 120x730 cm 760 kg Crjdpfx Adjzx U Nujreh year of manufacture 2001 can be purchased without feed unit

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,500 kg, permissible axle load (axle 2): 10,500 kg, permissible axle load (axle 3): 10,500 kg, first registration: 07/2022, total length: 13,800 mm, total width: 2,540 mm, total height: 3,400 mm, suspension: air, tire size: 235/75R17.5, wheelbase: 6,740 mm, color: yellow, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - Air suspension - Disc brakes - Toolbox = Notes = MAX Trailer F-S43-1AAF Hydraulic loading platform Adjustable hydraulic ramps Remote control 2022 BPW axles (3) Steering axle Cable winch Width markings TÜV/MOT/APK valid until 01-2027 French semi-trailer Chassis number: YAMT13XXXM01067 EXPORT SERVICES ————— • NL transit registration/license plates with insurance for 14 days • Austrian transit approval/license plates with insurance for 21 days • Transport to any port in the Netherlands and Belgium • Truck transport with semi-trailer The prices for export services are exclusive of the quoted price. Please contact us for further information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. GEERTS Trucks & Trailers / GEERTS Nederland B.V. Spoorlaan Noord 17 Cedpfx Ajz Icaqodrsrh 5121 WV Rijen The Netherlands

Year of construction: 2007, condition: ready for operation (used), A wooden window sash assembly line consisting of three main components is available. 1) Sash stop table with punching unit and Powasert automatic screwdriver. 2) Max Striffler glazing bead saw. 3) Ruchser RU-GOB-ES corner hinge and handle drilling machine, year of manufacture: 2007. Documentation available. An on-site inspection is possible. Package sale only. Credpfxszi Eims Adrsh

Condition: new, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, warranty duration: 24 months, water tank capacity: 70 l, noise level: 66 dB, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery (not included in the set) Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area performance (m²/h): 2805 Crodpfx Aoxnzuisdroh Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: The set includes NO batteries and NO charger Squeegee 900mm V-shaped with oil-resistant polyurethane rubbers Disc brush 510mm red - medium-hard Features: Powerful drive Automatic water stop Solenoid valve 2-tank system The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy handling thanks to a few yellow-coded controls. - Robust construction with integrated disc brush head. High area performance thanks to the large working width. Brushes are changed via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model as a viable alternative to walk-behind scrubbers.

Condition: used, functionality: fully functional, machine/vehicle number: WKEAZ000001090051, empty load weight: 2,850 kg, maximum load weight: 15,150 kg, overall weight: 18,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 04/2023, next inspection (TÜV): 04/2027, suspension: air, tire size: 345/45/19,5, tire condition: 85 %, trailer brake: trailer braked, Year of construction: 2023, Equipment: ABS, sturdy frame, KTL-coated – some minor surface rust Extendable drawbar, length 1,800 - 2,300 mm BPW axles with disc brakes, 370mm, ABS/EBS Air suspension with long air springs Suitable for 7.15 and 7.45-meter wheelbases, 7.15-meter wheelbase flush at the rear Riding height approx. 1.05 m Crjdpfxoz Enp Ee Adrsh Parking height 1.02 - 1.32 m Electrical connection: 15-pin plug Lighting with partial LED design Tires 445/45 R 19.5, tread depth: 7 - 13 mm Valid MOT until 04/2027 Valid safety inspection until 10/202 1 storage box on the left ADR sign on the rear 2 work lights (center and rear) 5 for sale For questions, please call 0171 8600862 Best regards, M. Irmer

Condition: new, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, overall weight: 345 kg, warranty duration: 24 months, water tank capacity: 70 l, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area coverage (m²/h): 2805 Battery (V / Ah): 24 / 105 Charger power supply (V / Hz): 95 – 253 / 50 – 60 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: SONNENSCHEIN 12V 105Ah GEL BATTERIES (2x). NEOS 24V 10A EXTERNAL CHARGER 900mm V-shaped suction bar with oil-resistant polyurethane rubbers 510mm red disc brush - medium hard Features: Powerful drive Automatic water stop Solenoid valve 2-tank system Batteries and charger included: - Sonnenschein 105Ah batteries + Neos 24V charger included in the set - Easy charging at any standard outlet. - Mains-independent use without tripping hazards. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy operation thanks to a small number of yellow-coded controls. - Robust construction with integrated disc brush head. High surface performance thanks to a large working width. Brush changes are made via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: Credpfx Asxn I Suedroh - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model, powered by powerful 105 Ah batteries, as a viable alternative to walk-behind machines (batteries and a suitable charger are included).

Condition: used, Year of construction: 2007, functionality: fully functional, Machine available with or without camera system. New spindle integrated. Cedpfx Ajx Hyd Nedrorh

Condition: used, Year of construction: 2012, grinding length 1000 mm grinding width 600 mm workpiece height 600 mm table surface area 1360 x 590 mm feed x-axis 30 - 30.000 mm/min feed y- axis 1200 mm/min Feed z- axis 1500 mm/min. stroke of the table 1200 mm spindle diameter 60 mm grinding wheel size 400 x 100 x 127 mm spindle speeds (infinitely variable) 1000 - 3500 U/min Crsdpfx Adsz Icr Tsreh weight of the machine ca. 6,5 t dimensions of the machine ca. 4,10 x 3,70 x 2,85 m

Condition: used, axle configuration: > 3 axles, first registration: 01/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, loading space height: 900 mm, total length: 13,800 mm, total width: 2,540 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 10,160 mm, color: red, Year of construction: 2019, Equipment: ABS, 1 x lift axle 3 x steering axle Radio-remote steering Hydraulic ramp Codpfx Aezcuxrjdrsrh Camera = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tires; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 2: Dual tires; Steered; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30% Rear axle 3: Dual tires; Steered; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Rear axle 4: Dual tires; Steered; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Weights Unladen weight: 11,344 kg Payload: 54,656 kg GVWR: 66,000 kg Maintenance APK (Technical Main Inspection): valid until 02/2027 Financial information Price: On request Identification Model number: N/A F-S44 / STEERING AXLE - LIFT = Company information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, Cut Max Guillotine Type: GM-1 Codpfxsy Ega Us Adrsrh Efficiency: 1500 kg/h Operating temperature: up to -20°C Machine dimensions: 2100 x 900 x 1850 mm Made of stainless steel Power supply: 3x400V 50 Hz Weight: 550 kg Condition: used/overhauled/ready to work

Year of construction: 2005, condition: excellent (used), machine/vehicle number: RHBD2400A, Complete Klöckner Möller - Siemens BD2 - 400A busbar system available! Stock 56.50 running meters!!! Type BD2-400A / 400 Amp - 5 pole - L1 L2 L3 N PE Credpfx Asrfwnkjdrjh Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length 3.25m, 1.25m Price per meter including connectors, end pieces and brackets Infeed and outlet boxes 16-32-63-125-250A are available as options The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! Danger; There are also 100A, 160A and 250A rails available - please inquire!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system?

Year of construction: 2005, condition: excellent (used), machine/vehicle number: RHBD2250A, Complete Klöckner Möller - Siemens BD2 - 250A busbar system available! Stock 81.25 running meters!!! Type BD2-250A / 250 Amp - 5 pole - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length 3.25m Price per meter including connectors, end pieces and brackets Cjdpfx Ajrfwngodrjrh Infeed and outlet boxes 16-32-63-125-250A are available as options The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! Danger; There are also 100A, 160A and 400A rails available - please inquire!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system?

Condition: good (used), Year of construction: 2011, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, injection pressure: 1,600 bar, total length: 4,000 mm, total width: 1,300 mm, total height: 1,900 mm, overall weight: 4,400 kg, warehouse no.: 503730 manufacturer: ENGEL type: e-max 310-100 controller: LC 200 A01 year of construction: 2011 clamping force: 1000 kN distance between tie-bars h x v: 460 x 410 mm size of mould plates h x v: 650 x 600 mm min. mould height: 150 mm max. mould height: 450 mm max. open daylight: 800 mm opening stroke: 350 mm screw diameter: 35 mm swept volume: 135 ccm injection pressure: 1600 bar equipment included incl. Spruepicker screen text german core pulling hydraulically 1x Anti vibration mounts mould heating 8x handling type: Angussentnahmegerät manufacture: ENGEL controller: ER-USP 5 year of construction: 2011 measures of machine l x w x h: 4m x 1.3m x 1.9m Cedpoz Eabtofx Adrjrh total weight: 4400KG

Condition: used, maximum load weight: 15,060 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2016, Year of construction: 2016, Equipment: ABS, KRONE AZ BDF Trailer | 2 x BPW | High lift | Duomat VIN: WKEAZ00000735847 Chassis / Components: * 2 x BPW axles * Air suspension * 2 x High-lift lowering/raising system * Disc brakes * ABS * Duomat pneumatic connection * ABS electrical connection * 15-pin electrical connection * Tires: 445/45 R19.5 160J * Remaining tread depth, axle 1: approx. 60% * Remaining tread depth, axle 2: approx. 90% Body: BDF trailer Weights: * Gross vehicle weight: 18,000 kg * Unladen weight: 2,940 kg * Payload: 15,060 kg Other: Crjdpfx Adsz Dl Ehjrsh * Year of manufacture: 2016 * First registration: 09.11.2016 * Color: Grey * MOT: due * Inspection: due New MOT/inspection, as well as weight adjustments (increase or decrease) are available upon request. ----Even after the purchase, we won't leave you alone: We will assist you in obtaining export or short-term license plates. We can also arrange for the transportation of your vehicle within Germany. Just contact us – we will be happy to help! We speak German, English and Russian. All information is without guarantee. Subject to change, errors and omissions, printing and typing errors, and prior sale.----About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability, and competence in the field of refurbishment and sale of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. With us, it's not just about the vehicle, but also the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we will personally and reliably support you – from the first contact to the handover of your vehicle. See for yourself. We look forward to your inquiry!----Our service for you: Vehicle loading We will assist you in loading your purchased vehicles. Special transport We will support you in organizing special transport. Export and short-term license plates We will assist you in obtaining export license plates or short-term license plates. Customs formalities We will also assist you with customs matters. Vehicle transport On request, we will arrange for the transport of your vehicle within Germany.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: L705226, functionality: fully functional, TECHNICAL DATA Manufacturer: Baron Max Model: KL-2680 Year: 2007 Serial Number: L705226 Control Unit: Fagor 8055TC WORKING CAPACITY Swing over bed: 670 mm. Center height to bed: 335 mm. Center height to top cross slide: 205 mm. Swing over cross slide: 400 mm. Dis. Between centers: 2100 mm. Width of bed: 450 mm. HEADSTOCK Spindle nose: A1-11 Spindle bore: 305 mm. Bar capacity: Ø 105 mm. Range of spindle speeds: 3 rang Gears Auto Shifting Spindle speeds range: H: 1500-331 rpm M: 330-93 rpm L: 92-24 rpm Taper in spindle: MT#6 SADDLE Longitudinal travel (Z-axis): 2000 mm. Cross-slider travel: 450 mm. Size of tool holder: Boring Tool: Ø 40 mm. O.D. Tool & Facing Tool: 25 mm. Ball screw (Dia x pitch): X-Axis: Ø25 mm. x P 5 mm. Z-Axis: Ø50 mm. x P 10 mm. TAIL STOCK Quill diameter: Ø105 mm. Quill travel: 220 mm. Quill taper: MT#5 Codpsvai Swjfx Adrerh ENGINE Spindle motor: 20HP Z-axis drive motor: 12 Nm. (FKM 44.3) X-axis drive motor: 6.3 Nm (FKM 42.3) Coolant pump motor: 1/4 HP X, Z-AXES FEED X axis rapid travel: 6 M/min. Z axis rapid travel: 8 M/min. GENERAL Power Required: 20 KVA. Floor space (L x M x H): 4090x1950x1820 mm. Approx, machine weight: 4700 Kgs. EQUIPMENT Coolant system Manual 4-way tool post 4 Jaws Self-centering scrolling chuck Ø 12". Steady rest

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0266, year of last overhaul: 2026, workpiece weight (max.): 3,600 kg, power of the milling unit: 10,250 W, disc diameter: 200 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Crjdpfx Adoztyhrsreh Detailed information about the machines is provided in the attached file.

Condition: good (used), functionality: fully functional, empty load weight: 2,970 kg, maximum load weight: 15,030 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2019, next inspection (TÜV): 08/2026, suspension: air, tire size: 445/45R19,5, maximum speed: 125 km/h, Equipment: ABS, GERMAN DEALER offers: well-maintained trailers with wide tires Credpfx Aoz Irzdsdreh available in multiple units 445/45R19.5 drawbar adjustable in length BPW axles disc brakes long air springs lifting height up to 1420 mm all with valid inspection and registration very good tires year of manufacture 2019 18,000 kg gross vehicle weight 2,970 kg unladen weight many trailers and swap bodies in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN DELIVERING SINCE 1983! VIEWING ONLY BY APPOINTMENT! #####

Condition: new, Catalog number: HZ014 – Preliminary milling – Edge trimming – New machine, in stock – CE certificate – Professional TECHNICAL DATA Crodpszruriofx Adrsh Panel thickness: 8-45mm Edge thickness: 0.4 mm – 3 mm Minimum panel width: 90mm Minimum panel length: 170mm Feed speed: 9m/min Preliminary milling: 12000 rpm Front/rear milling: 12000 rpm Top/bottom milling: 12000 rpm Edge trimming: 12000 rpm Polishing: 3000 rpm Feed motor power: 1.13kW Glue tank heating power: 1.315kW Preliminary milling power: 1.5kW Preliminary heating power: 0.4kW Glue spindle power: 0.25kW Front/rear milling power: 0.22kW Top/bottom milling power: 2×0.37kW Edge trimming power: 0.37kW Polishing motor: 0.12 kW and 0.18 kW Motor: 6.16kW Working height of the table: 960mm Extended support width: 560mm Dust extraction connection: 3x125mm Dimensions (L/W/H): 3731x720x1636mm Weight: 915kg The Holzing G-MAX 480 straight-line edge banding machine with preliminary milling, saw cutting, top/bottom milling, edge trimming, radius sanding, and polishing ensures a high-quality final finish on the workpiece. The veneer can be in rolls up to 3 mm thick and in strips up to 4 mm thick. The machine also has a glue tank with a capacity of 1.2 kg. Net price: 99000 PLN Net price: 23050 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, ELB PERFEKT BD 8 SPS is a surface grinder engineered for precision, high accuracy and reliability. Capacities: table 1360×590 mm; grinding length 1250 mm; max grinding 600×400 mm; travels X900 Z540 Y400; table load 900 kg. Specs: wheel 400×100 mm, 1440 rpm, bore 127 mm, spindle cone 60 mm; grinding spindle motor 20 kW; supply 3×400 V 50 Hz; total power 18.5 kW; machine weight ≈5400 kg. Accessories: paper filtration, electrical magnetic chuck 1200×600 mm, redressing device, lamp, central lubrication. Achieves tight tolerances; ideal for automotive, aerospace, tooling, medical and watchmaking. Codeyxn Igopfx Adrorh

Condition: excellent (used), Year of construction: 2009, Engel e-max 440/180 / All-electric injection moulding machine Year of manufacture: 2009 Injection unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Shot volume: 220 cm³ Clamping unit: Clamping force: 180 t Tie bar distance: 520 x 520 mm Platen size: 760 x 775 mm Ejector: electric Clamping system: toggle lever Control system: CC 200 - touchscreen Additional equipment: Machine in very good technical condition, operated in a clean production environment All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 interface Robot interface 3 x air valves Hardened injection unit - bimetallic Parallel movements Central lubrication Automatic mould height adjustment Kistler sensor - mould pressure control Original mould crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87 x 1.42 x 2.00 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests carried out on the selected machine, or to participate in live technical demonstrations at our company in Łódź. Cjdpfsz Ipq Nox Adrsrh Price: On request