Used Beck Shrinking Equipment for sale (39,839)

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 7560, working width: 1,200 mm, Equipment: documentation/manual, TECHNICAL DETAILS Working width: 1,200 mm MACHINE DETAILS Connected load: approx. 51 kW EQUIPMENT Documentation Bodpfx Aey Ed A Tod Aodb

Condition: ready for operation (used), Year of construction: 2003, functionality: unexamined, total length: 2,400 mm, total height: 1,400 mm, total width: 1,300 mm, Kallfass Shrink Tunnel STANDARD 650 NT Universally applicable high-performance shrink tunnel with side-adjustable air flaps and externally adjustable bottom air outlets for precise control of the hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculation system, a tunnel hood with an additional double-chamber system, and significantly enhanced all-round insulation provide energy-efficient operation. Equipped with infinitely variable rod chain conveyor. This tunnel is suitable for use with all shrink films, especially polyethylene (LDPE) or polyolefin films, in medium to high performance ranges. Comprehensive standard features: • Silicone-coated transport rods, rod spacing 25 mm, rod diameter 12 mm • Infinitely variable speed adjustment for the rod chain conveyor • Wear-free, contactless temperature control • Energy-saving, highly effective thermal insulation of the tunnel hood • Temperature control via electronic thermostat • Air outlet flaps adjustable from outside during operation • Fixed clearance height 200 mm • Adjustable working height • Safety equipment in accordance with EC Directive EN 60204: over-temperature monitoring • Machine design complies with EC Machinery Directive 98/37/EC (CE mark), built to EN/VDE standards and relevant accident prevention regulations for the food and beverage industry (GS test mark) Technical Data of Base Machine: Tunnel passage width: 650 mm Tunnel passage height: 200 mm (fixed) Length of heated tunnel hood: 1400 mm Extended tunnel outfeed: approx. 500 mm Working height, adjustable: 800 - 900 mm Product transport: rod chain conveyor, silicone-coated rods, rod spacing 25 mm, rod diameter 12 mm Transport speed, variable: 6 - 22 m/min Drive: three-phase geared motor 0.37 kW, frequency-controlled Heater blower output: constant Airflow adjustment: sliding dampers underneath and side air flaps, externally adjustable Temperature control: electronic thermostat, switching accuracy ± 0.2°C Control voltage: 24 V DC Power supply: 400 V three-phase current, 50 Hz with protective earth Installed heating capacity: 18 kW (average continuous consumption approx. 40%) Power rating: 20.5 + 11.1 kVA Nominal current at 400 V: 29.6 A in standalone mode Max. total connected load: 45.6 A incl. additional three-phase connection Bjdpfxsy Ic Hij Ad Aedb Control cabinet position and operator side: on the left in working direction Paint finish: Kallfass anthracite

Condition: ready for operation (used), Year of construction: 2003, functionality: unexamined, total length: 1,800 mm, total height: 1,400 mm, total width: 1,000 mm, KALLFASS Shrink Tunnel COMPACT 450 SO (Used machine, year of manufacture 2003; sold as is, where is) On consignment from customer Description: Compact and economical shrink tunnel featuring the patented ring nozzle heating system with highly effective air flow regulation. Equipped with infinitely variable rod chain conveyor. The rotatable rod device prevents undesirable marks on the bottom of the packaged goods when using technical films such as Clysar ®, Cryovac ®, and others. This tunnel is particularly suited for shrinking small to medium format products with moderate throughput requirements. Comprehensive standard equipment includes: • Silicone-coated transport rods, rod spacing 25 mm, rod diameter 12 mm • Optional device for rotating transport rods • Infinitely variable speed control for the rod chain conveyor • Infinitely variable tunnel fan power, adjustable according to film quality • Energy-saving 2-stage heating system with highly effective thermal insulation of the tunnel hood • Temperature control via electronic thermostat • Adjustable tunnel clearance height • Adjustable working height Technical data: Tunnel passage width: 450 mm Tunnel passage height, adjustable: 100 - 400 mm Length of heated tunnel hood: 1,400 mm Working height, adjustable: 800 - 900 mm Conveyor speed, variable: 2.5 - 12 m/min Drive: AC motor 0.25 kW Airflow regulation: Patented ring nozzle system Temperature control: Electronic thermostat Power supply: 400 Volt three-phase, 50 Hz with protective earth Installed heating capacity, 2-stage switchable: 9 + 4.5 kW (continuous operation consumption approx. 40%) Rated power: 24 kW Rated current: 36.0 A Control cabinet position and operator side: Left, in direction of operation Finish: Kallfass anthracite Additional equipment: • 300 mm cooling station with ball-bearing mounted aluminium rollers at the tunnel outlet Bdedpfxey Ic Akj Ad Aeb • Special cooling fan mounted above the tunnel outlet

Condition: not inspected (used), Year of construction: 2003, functionality: limited functionality, total length: 1,950 mm, total height: 1,850 mm, total width: 1,650 mm, type of input current: three-phase, product height (max.): 100 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 450 mm, product width (min.): 20 mm, input voltage: 400 V, input current: 5 A, working height: 800 mm, width of welding knife: 450 mm, passage height: 150 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), Fully Automatic Side Sealing Machine UNIVERSA 400NT Used Machine; Year of Manufacture: 06/2003 Description: Fully automatic L-seal flow packaging machine for packaging products—regardless of their length—with a full wrap and without film overlap. Maximum output is approx. 85 cycles/min. Product feeding is carried out via a conveyor belt, simultaneously wrapping the item in a centre-folded film using a forming shoulder. Product indexing is managed by photoelectric sensors. The feed conveyor can be smoothly adjusted for different product widths. After the product is wrapped in film, the cross sealing is performed by a permanently heated sealing system. Longitudinal sealing is achieved via a continuous side sealing unit. The height of both the forming shoulder and sealing systems can be manually adjusted. The remaining film trim is collected on a film winding device. Suitable for all standard centre-folded films from approx. 12 – 80 µm, e.g. polyethylene (LDPE) and polyolefin films. Comprehensive standard equipment: • Motor-driven film holder, located near the floor for easy loading • Film tear and end-of-film detection • Product indexing selectable via horizontal or vertical photoelectric sensor • Product protection in the sealing area with special safety light barrier • Conveyor belts at the sealing transition point equipped with knife edges • Infeed conveyor extendable for easy, quick threading of film • Permanently heated sealing bar with exchangeable sealing strip; available in various profiles for optimal seam quality depending on product and film type • Electromechanical sealing bar drive • Continuous side sealing • Motor-driven film transport with automatic film trim winding • Operator guidance and fault diagnosis via multilingual text display (languages: German, English) • Programmable logic controller: SIEMENS S5 • Adjustable working height • Machine built in accordance with EU Machinery Directive 98/37/EC (CE sign), EN/VDE standards, and relevant accident prevention regulations of the Employers’ Liability Insurance Association for Food and Luxury Goods Industry (GS mark) Additional features: • Infinitely variable speed control for both conveyor belts with frequency inverter, adjustment range approx. 10–35 m/min, including soft start • Film shortage monitoring Technical data of the base machine: Cross sealing bar length: 450 mm Minimum product length: 80 mm Film: Centre-folded film, approx. 12–80 µm Film roll support: Near floor level for easy loading Film roll outside diameter: max. 400 mm Film core diameter: approx. 76 mm Film roll width: max. 600 mm Working height: 780–930 mm Bodpfoy Icr Sjx Ad Aodb Conveying speed: Adjustable 10–35 m/min Sealing system: Permanently heated sealing bar with exchangeable sealing strip, completely odourless operation, temperature control and monitoring via PLC PLC: Siemens S5 Sealing bar clearance height: max. 150 mm Power supply: 400 V three-phase, 50 Hz with protective conductor Rated power: 3.5 kVA Rated current: 5.1 A Control cabinet position: To the right in working direction Finish: Kallfass anthracite Dimensions: L = 1,975 x W = 1,170 mm x H = 1,400 mm

Condition: used, Year of construction: 2008, functionality: unexamined, Beck Packautomaten Bdodpfxsy Ichao Ad Aeb Bundle Packer KV 540 on Year of Manufacture: 2002 Infeed and outfeed conveyor belts, each 2x 200mm belt width Clearance height: max. 250mm Sealing width: max. 540mm Product length: max. 340mm BECK shrink bundling machine with automatic product feed Collective packer type KV 540 HP - online Used machine: Year 2002 Ideal shrink bundling machine suitable for all company sizes. Bundling machine and shrink tunnel form a compact, space-saving unit. Versatile and mobile, can be used at various packing stations. max. sealing width: 540 mm max. product height: 250 mm max. product length: 340 mm Conveyor bar spacing: 38 mm (every 4th rivet fitted) Operating principle The KV 540 HP online easily processes all thermoplastic shrink films such as polyethylene, PVC and polypropylene, whether clear or printed. The system operates with two film rolls at once (upper and lower film). The machine is equipped with a photoelectric control and automatically adjusts the work cycle according to the product length. The product is fed into the machine either manually or automatically via product-specific feeding devices using the infeed conveyor belt, which triggers the closing of the sealing tools. Sealing is done with a continuously heated cutting and sealing blade. A precisely and steplessly adjustable temperature control of the sealing tools prevents unpleasant odours. The advanced film guiding system allows for packaging of items with varying heights and lengths in any sequence without machine adjustments. An integrated shrink tunnel attached to the bundling machine receives the loosely sealed products by means of an outfeed conveyor belt and shrinks the package tightly around the goods with precisely controlled hot air. Operating speed The machine’s hourly throughput in continuous operation is up to 1,000 packs, depending on the article size and feeding type. Standard Features - Pneumatically driven sealing blade - Film guidance for packaging products of different heights without machine changeover - Safety interlock with simultaneous product protection - Simple, adjustable electrics for sealing and shrink process - Thermostat-controlled shrink tunnel with various heat settings and continuously adjustable conveyor speed The machine meets VDE and safety regulations. Product transport: automatic via conveyor infeed and outfeed Power supply: 380 V three-phase, 50 Hz Power rating: 14 kW Heating capacity: adjustable from 4 - 12 kW Colour: Hammer finish, light grey Additional equipment - Hold-down device above the outfeed conveyor belts - Film pressure rollers at tunnel exit

Condition: ready for operation (used), Year of construction: 1982, functionality: unexamined, length of welding knife: 560 mm, passage height: 230 mm, passage width: 430 mm, Equipment: documentation/manual, KALLFASS Compact Shrink Wrapper KC 5040/450 - Used unit, year of manufacture 1982 Description: Easy-to-use L-sealer combined with a shrink tunnel. Exceptionally robust design for industrial use. Sealing frame dimensions: 500 x 400 mm. Proven impulse sealing technology with PTFE-coated sealing wire for absolutely odorless operation. Performance up to approx. 20 cycles/min. Sealing frame can be closed manually with minimal effort. Equipped with a closure mechanism featuring an automatic pressure system for precise compliance with set sealing times and reliable separation, even for thicker films. Product transfer conveyor for automatic feed of sealed packages into the shrink tunnel. Suitable for all standard centerfold shrink films from approx. 12 - 80 µm, e.g. polyethylene or polyolefin films. Standard basic equipment: • Film roll holder for setting film reels • Feed table complete with film separator bar and separator sheet • Air support plate for automatic opening of the centerfold film • Film hold-down plates on the sealing frame • Base heating for the sealing wires to increase packing performance • Automatic product transfer conveyor into the shrink tunnel, height adjustable for seal placement at half product height • 1 transition roller at the tunnel entrance • Adjustable rod-chain transport through the shrink tunnel • Silicone-coated conveyor rods, rod spacing 25 mm, rod diameter 12 mm • Energy-saving 2-stage heating • Highly effective thermal insulation on the tunnel hood for energy saving • Infinitely adjustable tunnel blower power • Temperature control via electronic thermostat • Adjustable tunnel passage height • Adjustable working height • Machine mounted on castors for mobile use Included additional equipment: • Automatic product transport into the shrink tunnel • 300 mm cooling station with ball-bearing aluminium rollers at tunnel exit • Special cooling fan at top of tunnel exit Technical specifications: Sealing frame dimensions: 500 x 400 mm Film: Centerfold film, approx. 12 - 80 µm Max. outer diameter of film rolls: 300 mm Film core diameter approx.: 76 mm Max. film roll width: 550 mm Adjustable working height: 870 - 970 mm Tunnel passage width: 450 mm Adjustable tunnel passage height: 100 - 400 mm Heated tunnel hood length: 900 mm Product transport: Rod-chain conveyor Variable conveyor speed: 2.5 - 12 m/min Drive: AC gear motor 0.25 kW Bjdjy H Evdopfx Ad Ajdb Temperature control: Electronic thermostat Heater blower output: Infinitely adjustable Electrical connection: 400 V 3-phase, 50 Hz, with protective earth Installed heating power, 2-stage switchable: 4.5 + 1.5 kW (continuous operation consumption approx. 40%) Nominal power: 8.5 kW Nominal current: 12.3 A Control cabinet and operator side: Left, in working direction Paint finish: Kallfass green, similar to RAL 6011 Dimensions: L = 2,500 mm x W = 1,050 mm

Condition: repair required (used), functionality: limited functionality, Packaging Machine Serial Packer S 1732 - Used machine, year of construction approx. 1986 - Inspected, tested, and ready for operation The machine is equipped with a photoelectric control system that adjusts the operating cycle according to the length of the product being packed. This allows for the packaging of items of varying lengths in any sequence. Height and lateral adjustments can be made in seconds using a handwheel. Operating Method The machine operates in cycles, fully automatic with photoelectric control. Products to be packaged are fed into the machine via a special infeed conveyor and are four-side sealed. Oil hydraulics ensure precise operation of the sealing unit. Sealing is performed using the impulse-cut sealing process and can be equipped with additional special sealing elements. By precisely and infinitely adjusting the temperature of the sealing tools, odors are avoided. Operating Speed The actual production speed and effective net throughput depend on the shape, type, and arrangement of the products, and can be up to 1,000 packs per hour. Standard Features - Special film waste rewinding unit - Film waste monitor - Hydraulically operated sealing stamp - Photoelectric package length control - Continuous endless longitudinal sealing - Impulse sealing with adjustable pre-heating for separating seam - Cycle-controlled transverse sealing - Special designs for precise film and product transport - Infinitely adjustable height and side settings - Wide-range adjustable electrics for sealing temperature, sealing impulse, sealing duration, and film control Bdjdpsy H D Edjfx Ad Aob - Standard safety devices The machine complies with the VDE and safety regulations of its time. Working width: 170 - 320 mm, infinitely laterally adjustable Product height: max. 80 mm, depending on article, format, film quality and thickness Power supply: 380 V three-phase, 50 Hz Connected load: 3 kW Color: Hammer finish paint, light grey Additional Equipment 1 piece Special Infeed Conveyor integrated into the machine Height- and side-adjustable Conveyor length: 1,500 mm Conveyor width: 150 mm With stop motor and laterally adjustable guide rails

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, DESCRIPTION Beck-Packautomaten Series Packer S1750 X Fully automatic film packaging machine for four-side product sealing Fully automated, conveyor belt feeding with light barrier control Operation: The Beck series packer operates fully automatically with photoelectric product detection. The goods to be packaged are conveyed on a transport belt into the cross sealing unit and are then sealed on all four sides in a step-by-step process. The film rolls are positioned above and below the transport belt. For the production of tight shrink packs, the packaging machine can be expanded into a complete film packaging line by integrating the proven, energy-saving Beck heat shrink tunnel. Technical data: Standard operator side: right Sealing bar width: 550 mm Sealing bar closure: servo-driven Sealing system: permanently heated Pass-through height: 100 mm Infeed belt width: 140 mm Outfeed belt width: 140 mm Product width: 150–500 mm Product length: 30 mm up to unlimited, with closure of sealing bar gap Speed control: infinitely variable with frequency converter from 19–40 m/min Capacity: up to 50 cycles/min* Longitudinal sealing: continuous operation Film: flat film, printed or plain, from 11 to 80 micron Film width: max. 650 mm Film roll diameter: max. 300 mm Machine length: 2,550 mm Machine width: 1,600 mm Machine height: approx. 1,700 mm Working height: 800–950 mm Electrical connection: 3N400V 50 Hz Connected load: approx. 3 kW Paint finish: cream white / green * Machine output depends on equipment, product, and film. Description: • Machine frame in steel sandwich construction • The sealing system is permanently heated and maintenance-free • With freely-programmable Siemens S7 PLC • Siemens operator panel: digital control unit OP7 • Easy format changeover via central width and height adjustment • Format data storage with simple menu and operator guidance • Inline product feeding, product indexing via light barrier, optionally horizontal or vertical scanning • Hold-down plates at the cross sealer with product scanning Bsdpfsy H Dynox Ad Aodb • Longitudinal sealing electrically actuated • Film unwind device integrated in the machine frame, without plug-in shaft (allows easy and quick film roll change) • Film rewind device with film break-control, high roll capacity • Film feed motor-driven, including end-of-film detection • Machine hood for optimum accessibility, all safety windows equipped with safety switches • Beck packaging systems meet CE conformity requirements Additional equipment: - Rotary encoder, swing-away side sealing system, needle perforation unit for the top film

Condition: ready for operation (used), Year of construction: 1995, functionality: unexamined, total length: 1,860 mm, total height: 1,500 mm, total width: 800 mm, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 12 kW (16.32 HP), input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Thermal Shrink Tunnel HV 400 - Used machine, built in 1995 - Inspected, tested, and fully operational This high-performance shrink tunnel is designed for energy efficiency. The heating system and adjustable settings are highly variable, allowing for precise shrinking of film-wrapped products with various shapes and contours. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable upper and lower heating. The machine is equipped with an electronic temperature controller and is designed for a maximum internal temperature of up to 250 °C. The conveyor speed is infinitely variable. Technical data Bdjdpfx Adjy H Dxko Ajb Passage width: 400 mm Passage height: 130 mm Hood length: 1,000 mm Conveyor length: 1,860 mm Rod conveyor: Rotating rods with silicone coating, every second rivet fitted Power supply: 380 V three-phase, 50 Hz Heating capacity: Selectable from 2 - 10 kW Connected load: 12 kW Color: Hammertone light grey Additional equipment: Temperature control with electronic regulator and contactless relay for precise temperature consistency Pressure rollers at the discharge end

Condition: ready for operation (used), Year of construction: 1998, functionality: unexamined, total length: 1,860 mm, total height: 1,400 mm, total width: 950 mm, Thermal Shrink Tunnel HV 401 LD - Used unit, year of manufacture approx. 1998 - Tested and operational The high-performance shrink tunnel is built in an energy-saving design. Thanks to its flexible heating system and adjustable settings, the machine can reliably shrink-wrap products of various contours with film. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable top and bottom heat. It is equipped with an electronic temperature control system and is designed for a maximum internal temperature of up to 250°C. The conveyor speed is infinitely adjustable. Technical data Passage width: 400 mm Passage height: 150 mm Hood length: 1,700 mm Conveyor length: 2,100 mm Bsdpfoy H Dtuex Ad Asdb Rod conveyor: covered with Teflon mesh (as shown in the photos) Power supply: 380 V three-phase, 50 Hz Heating capacity: adjustable from 2 – 10 kW Rated connected load: 12 kW Color: light grey hammer finish Additional equipment: Temperature control with electronic controller and contactless relay for precise temperature stability

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, total length: 3,200 mm, total height: 1,500 mm, total width: 1,020 mm, type of input current: three-phase, product height (max.): 80 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 320 mm, product width (min.): 150 mm, input voltage: 400 V, input current: 5 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 360 mm, passage height: 100 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), Packaging Machine Series Wrapper S 1732 with Conveyor Belt - Used equipment, year of manufacture: 2009 The machine is equipped with a photoelectric control system that adjusts the working cycle according to the length of the product to be packed. This allows products of varying lengths to be packed in any sequence. The machine's height and side adjustments can be made in seconds via a handwheel. Operating Principle: The machine operates in cycles, fully automatic, with photoelectric control. Products to be packed are fed into the machine via a special infeed conveyor and are sealed on all four sides. Oil-hydraulics ensure precise operation of the sealing unit. The sealing process uses an impulse-separation welding method and can be fitted with additional specialized sealing elements. An accurately adjustable, stepless temperature control of the sealing tools prevents unwanted odors. Operating Speed: The actual production speed and effective net output depend on the format, type, and composition of the products and can reach up to 1,500 packages per hour. Standard Features: - Special rewinding unit for film waste - Film waste monitoring - Hydraulically operated sealing plungers - Photoelectric control of product length - Continuous longitudinal sealing (endless) - Impulse sealing with adjustable pre-heating for separation seams - Cycle-controlled cross sealing - Special configurations for precise film and product conveyance - Stepless height and side adjustment - Broadly designed and adjustable electrical controls for sealing temperature, sealing impulse, sealing time, and film control - Standard safety equipment The machine complies with VDE and all safety regulations. Working width: 170 - 320 mm, stepless side adjustment Product height: max. 80 mm, depending on product, format, film quality, and thickness Power supply: 380 V three-phase, 50 Hz Connected load: 3 kW Colour: cream-white Additional Equipment: - 1 special infeed conveyor integrated into the machine • Height and side adjustable • Belt length: 1,500 mm • Belt width: 150 mm • With stop motor and laterally adjustable guide rails - 1 plug-in axle film supply rack Bjdpey H Dqtsfx Ad Aedb • Expanding mandrel with mechanical clamping device for upper and lower film • For smooth film feed, suitable for film thicknesses from 12 µm • Max. roll diameter: 300 mm • Min. core inner diameter: 76 mm

Condition: refurbished (used), functionality: fully functional, total length: 3,200 mm, total height: 1,500 mm, total width: 1,020 mm, type of input current: three-phase, product height (max.): 80 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 320 mm, product width (min.): 150 mm, input voltage: 400 V, input current: 5 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 360 mm, passage height: 100 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), Packaging Machine Serial Packer S 1732 - Used machine, year of manufacture: overhauled The machine is equipped with a photoelectric control system that regulates the operating cycle according to the length of the product to be packed. This allows items of varying lengths to be packaged in any sequence. Height and side adjustments can be made in seconds via a handwheel. Operating principle: The machine operates in cycles, fully automatic, with photoelectric control. Products to be packaged are fed into the machine via a special infeed conveyor and are four-sided sealed. An oil-hydraulic system ensures precise function of the sealing unit. Sealing is done using the impulse/tape-sealing process and can be equipped with additional special sealing elements. With precise, infinitely variable temperature control of the sealing tools, odor emissions are avoided. Working speed: Actual production speed and effective net output depend on the format, type, and arrangement of the products, and can reach up to 1,500 packs per hour. Standard features: - Special take-up device for film waste - Film waste monitor - Hydraulically operated sealing pistons - Photoelectric product length control - Continuous endless longitudinal sealing - Impulse sealing with adjustable preheating for separating seam - Cycle-controlled cross sealing - Special designs for precise film and product transport - Infinitely adjustable height and side settings - Broadly designed, adjustable electrical controls for sealing temperature, sealing impulse, sealing time, and film control - Standard safety features Bdjdpfx Adsy H Dhfe Asb The machine complies with VDE and safety regulations. Working width: 170 - 320 mm, infinitely adjustable sideways Product height: max. 80 mm, depending on article, format, film quality, and thickness Power supply: 380 V three-phase, 50 Hz Connection rating: 3 kW Color: hammer-tone paint, light grey Additional equipment: - 1 piece special infeed conveyor built into the machine, height and side adjustable Belt length: 1,500 mm Belt width: 150 mm with stop motor and laterally adjustable guide rails - 1 piece plug-in axle film roll holder Expanding shaft with mechanical clamping device for top and bottom film For smooth film feed, suitable for films from 12 μm thickness Max. roll diameter: 300 mm Min. core inside diameter: 76 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 19 kW (25.83 HP), input frequency: 50 Hz, nominal power: 19 kW (25.83 HP), heating capacity: 18 kW (24.47 HP), Beck Packautomaten HV601 HPLS Year of manufacture: 2008 Pass-through width: 600 mm Pass-through height: 420 mm with pressure rollers at the outfeed Transport rods: 15 mm with 19 mm silicone coating Rod pitch (center to center): 38 mm Hood length: 1700 mm Bdodsy H Ddaopfx Ad Aeb Overall length: approx. 2100 mm Conveyor speed: infinitely adjustable Connected load: 19 kW As shown in the photos

Condition: good (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, input frequency: 50 Hz, heating capacity: 1.2 kW (1.63 HP), Packaging machine Minipack Minima Bdodpfjy Ik A Esx Ad Ajb Chamber shrink wrapping machine Minipack with base frame Capacity up to 250 cycles/hour Connection 230 V Used machine Visit our large showroom!

Condition: used, Year of construction: 2008, functionality: unexamined, Beck Packautomaten V800 Banding Machine Bodpfxsy Hmado Ad Aodb Infeed and outfeed conveyor belt, belt width 700 mm Maximum clearance height 400 mm Frequency inverter controlled Heated sealing stamp, 800 mm wide Maximum film width 800 mm With Siemens SP control system and operator panel Year of manufacture: 2008

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, length of welding knife: 560 mm, passage height: 230 mm, passage width: 430 mm, Equipment: documentation/manual, Smipack semi-automatic L-sealing machine type FP560A Used unit, INOX stainless steel version Sealing frame size: 560x430 mm Max. passage height: 230 mm Max. film width: 600 mm Max. film roll diameter: 300 mm Automatic sealing frame closure with product transport Suitable for polyolefin and LDPE film Power supply: 230V Bdodpfx Adey Hl Sre Aob Good condition Immediately available

Condition: like new (used), functionality: fully functional, Very nice vertical sealing machine for sale. Brand: Minipack, type: Mailbag Digit. Ideal for magazines, newsletters, catalogues, books, and more. Up to 1200 units per hour. Digital control panel and automatic booklet length regulator with photocell. Counter, 220 volts. Of course, you are welcome to test this machine with us. We can arrange transport and packaging for you and load it onto a truck or container. Ask for a price including transport (location: The Netherlands). Regards, Henk Hoos. Bdedpfey Enu Tsx Ad Aeb

Condition: ready for operation (used), No. of sleeve heads: 1 Linear design Type of sleeving: Full product sleeve / partial / bottom sleeve Capacity: up to 12,000 pcs/hour Bedpfxey A Tlfo Ad Aedb

Condition: good (used), Year of construction: 2010, Secomak Shrink tunnel Bedpfxoyw S Tdo Ad Aedb Serial: 6905 2010, Stainless shrink tunnel, adjustable temp controls, max product 160mm w x 360mm h, 3Ph

Condition: used, Year of construction: 1976, functionality: fully functional, total length: 17,000 mm, We offer this ready-to-use Kurt Lachenmeier stretch wrapping line + hood shrink system, year of manufacture 1976. Kurt Lachenmeier stretch wrapping line + hood shrink unit (gas) – 17m – fully functional Bdedpfjyy Dqgox Ad Aeb For sale is a stretch wrapping system from Lachenmeier with a gas-powered hood shrink unit. ✅ Fully operational ✅ Suitable for all pallet types ✅ 2 feed stations ✅ Including roller conveyors ✅ Equipped with CO₂ fire suppression system (safety system) ✅ Total length: approx. 17 meters Location: near Cologne Inspection possible by appointment Price: negotiable basis ⚠️ Sale takes place without warranty or returns For further details, please see the pictures If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, total length: 1,120 mm, total height: 1,490 mm, total width: 660 mm, type of input current: AC, product height (max.): 120 mm, product height (min.): 1 mm, product length (min.): 50 mm, product length (max.): 430 mm, product width (max.): 290 mm, product width (min.): 50 mm, input voltage: 230 V, input current: 13 A, overall weight: 100 kg, power: 3 kW (4.08 HP), film width: 400 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), table width: 320 mm, table length: 460 mm, Equipment: documentation/manual, 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine – UNUSED – As New Used 2017 Robert Seal Corp SC346 heat shrink wrapping machine for sale. Never used from new, single phase, compact shrink wrapper, excellent condition. Machine Manufacturer: Robert Seal Corp. Model: SC346 Machine Type: Heat Shrink Wrapping Machine Year: 2017 Condition: Never used from new. High-Quality Heat Shrink Packaging Machine for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine, supplied new and never used from new. The machine is in very good / as-new condition, making it an excellent opportunity to acquire a modern shrink wrapping system at a fraction of new cost. Designed for efficient, professional heat-shrink packaging, this compact and reliable machine is ideal for manufacturing, food, print, distribution, e-commerce, and general packaging applications. Bdsdpfxeydqm Ie Ad Aeb Key Features & Benefits Robert Seal Corp SC346 Heat Shrink Wrapper Manufactured 2017 Never used – unused stock Compact footprint Simple, reliable operation Single-phase power – easy installation Ideal for small to medium production runs CE marked Technical Specifications – Robert Seal Corp SC346 General Machine type: Heat Shrink Wrapping Machine Model: SC346 Year of manufacture: 2017 Condition: Very good – never used Supplier: Robert Seal Corp CE compliant Power & Electrical Power supply: 230V – 1 Phase Frequency: 50 Hz Installed power: 3.0 kW Current: 13.6 A Dimensions & Weight Overall machine dimensions: Length: 1120 mm Width: 660 mm Height: 550 mm Machine weight (without stand): 69 kg Working table height (on stand): 940 mm Sealing & Packaging Capacity Sealing area: 320 × 460 mm Minimum package size (A × B × C): 50 × 50 × 1 mm Maximum package size (A × B × C): 430 × 290 × 120 mm Note: B + C must not exceed 350 mm Film type: Centre-fold shrink film Maximum film thickness: 60 gauge Typical film dimensions (D-F-E): 400 × 250 × 75 mm Operating Characteristics Acoustic noise level: 71.8 dB Compact, energy-efficient heat tunnel Suitable for continuous or intermittent operation Ideal Applications Product shrink wrapping Food & beverage packaging Printed materials & cartons E-commerce fulfilment Contract packing operations General manufacturing & distribution Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used & unused machinery Machines honestly described and inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Bdsdpfx Ajxnzlhod Ajb Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact Shrink Wrapper KC 5040/450 Universal Year of manufacture: 2010 Technical data: Sealing frame dimensions: 500 x 400 mm Film roll width: max. 550 mm Bodpoyyxr Eefx Ad Aodb Working height: 870 - 970 mm Power supply: 380 V three-phase Easy-to-operate L-sealing machine combined with a shrink tunnel. Especially robust design for industrial use. Sealing frame dimensions 500 x 400 mm. Proven impulse sealing technology with Teflon-coated sealing wire for completely odor-free operation. Equipped with a closing mechanism as a pressure-automation system to ensure precise adherence to the set sealing time and to enable reliable sealing even of thick films. Inspection and demonstrations are possible at our premises by appointment. Functional guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, Fully automatic flow pack machine for packaging products – regardless of their length – in a full wrap and without film overlap. Product infeed is via a conveyor belt while simultaneously wrapping into a center-folded film using a forming shoulder. Product separation is controlled by a photoelectric sensor. The infeed conveyor can be easily adjusted for different product widths. Longitudinal sealing is achieved by a continuous side sealing device. The height position of the forming shoulder and sealing units is manually adjustable. Bdjdeyybuiopfx Ad Asb Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is fully functional. Technical data: Cross sealing bar: 850 mm Film: center-folded film, approx. 12 - 80µm Film roll outer diameter: max. 400 mm Film roll width: max. 900 mm Min. product length: 120 mm Pass-through height: 300 mm Working height: 780 - 930 mm Power supply: 400 Volt three-phase, 50 Hz with protective conductor Rated output: 3.5 kVA Rated current: 5.1 A Inspection and demonstrations are possible in our facilities by appointment. Functionality guarantee, no warranty.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, The BP series of monobloc semi-automatic and automatic shrink wrappers with sealing bar stands out for its versatility. Depending on the model, this range of packaging machines is particularly suitable for packing an extremely wide variety of products from different market sectors in film only, pad + film, or tray + film configurations. Equipped with 90° or in-line infeed, a multi-push system, and cutting-edge technology, these machines integrate perfectly and easily into shrink film packaging lines. The BP Series can reach output rates of up to 25 packs per minute. Bdedpfxsyvhzzo Ad Ajb This machine is used as a demo unit for clients and features the pusher automation option for easy operation!