Used Behringer Lps 60 Ta for sale (31,052)

Condition: excellent (used), Year of construction: 2022, Available immediately. Behringer LPS 60 TA, manufactured in 2022, in extremely well-maintained condition. This is a very special band saw; it operates fully automatically! Advantages of the LPS-TA table band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth operation, and long blade life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force transmission of the saw feed is located directly below the cutting point. Advantages in material purchasing By producing flat materials from large sheets, efficiency gains can be achieved in both storage and raw material purchasing. Clamping device for layer cuts (optional) For sawing larger batch sizes, sheets can be stacked in layers and held securely using the optional vertical additional clamping device. Chip conveyor as standard Below the saw unit, directly in the direction of the chip flow, there is a large-sized chip conveyor with an integrated coolant tank. Chips and coolant are collected and separated here. For cleaning and maintenance work, the conveyor can be pulled out of the machine frame. Powered duplex chip brushes effectively clean the saw blade and thus increase the tool life. The brushes are automatically adjusted to the saw blade and ensure consistent cleaning performance. Automatic feed device Through the combination of an NC-controlled feed device and intelligent control, sheets can be separated into strips fully automatically. Servo feed system The use of the Behringer servo feed system creates a constant chip removal rate and makes better use of the performance of modern saw blades. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloading and premature wear of the saw blades. Fast saw blade change ensures the shortest possible setup times. In just two to three steps, the saw blade can be moved to the changing position. Blade guide parts made of gray cast iron are made by Behringer and provide vibration damping directly at the cutting point, thus increasing the tool life. Compact Due to its compact dimensions, the table band saw can be installed even in confined spaces. Movable material support table Isdpfx Aezubxhochsba For easy loading and unloading using a crane, the material table can be pulled out from under the saw unit.

Condition: used, Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 60 rpm Ibjdpfx Acjdkzv Eehsa -Power: TA = 5 Nm -Construction: B3 -Shaft: Ø 25 mm -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 700/225/H210 mm -Weight: 30 kg

Condition: good (used), Clamping device for automatic band saws, saw band rollers, saw band guide -Saw blade guide, from Behringer HBP HBP360A band saw machine -Price: complete -Dimensions: 460/70/H505 mm -Weight: 28.6 kg Isdpfx Aegccunjchsba

Year of construction: 1997, condition: used, Quick clamping device, quick clamping device, hydraulic clamping device, automatic band saw clamping device, hydraulic double vice -Clamping device: hydraulic double vice from automatic band saw Behringer HBP 360 A -Clamping depth: up to approx. 380 mm -Measurements: see photos Ibodpfegbvnvsx Achoa -Dimensions: 400/1130/H665 mm -Weight: 192 kg

Condition: excellent (used), Year of construction: 2011, Behringer Eisele HCS 160 MF including sorting and feed magazine, air filtration system, and much more. The machine will arrive at the end of August and will then be refurbished. The photos show the original condition. Iodpfxjzhki As Achoba

Condition: used, Year of construction: 2000, machine/vehicle number: 300584, power: 7.5 kW (10.20 HP), cutting height (max.): 360 mm, cutting width (max.): 400 mm, Equipment: CE marking, documentation/manual, High-performance, heavy-duty automatic horizontal bandsaw from premium German manufacturer Behringer. Designed for precise and cost-effective cutting of solids, tubes, and profiles. Key Features: Stable Dual-Column Design: Twin-pillar construction guarantees vibration-free operation, geometric accuracy, and maximum blade life. Ibedezbg E Ijpfx Achea Fully Automatic Operation: Equipped with a hydraulic material feed system and automated clamping vices for mass production cycles. Behringer NC Control: Original digital operator panel for easy programming of cutting lengths and batch sizes. Condition: The machine is in fully operational condition, regularly maintained, and currently located in an active production workshop environment. CE certified.

Condition: used, Year of construction: 1993, machine/vehicle number: 493187, Lg. No. 21236 Hydraulic - twin-column guided miter - metal band saw Technical Data: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Miter adjustment via handwheel Ibsdpfxowqpmne Achsa - Saw band size 5400 x 38 x 1.3 mm - Cutting speed steplessly adjustable 19 - 130 m/min - Cutting pressure steplessly adjustable 0 - 10 m/min - Manual material clamping - Pre-selection of the stroke height of the saw band - Micro-spray coolant system - Total drive power 400 V / 8 kW - Space requirement ca. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Infeed + outfeed roller conveyors each approx. 6000 / 8000 mm

Condition: used, empty load weight: 7,850 kg, axle configuration: 3 axles, first registration: 08/2018, next inspection (TÜV): 02/2026, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2018, mileage: 526,001 km, ref: W0013571 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lifting odometer, * Toolbox: 1, * Spare wheel holder: 2, Iodezupnqepfx Achsba * Rear door design: Rear portal doors, * Locking rods on rear doors: 2, * Floor: Aluminum floor, * Double-decking system, * Double-decking beams: 22 VIN: WSM000005210842 Tire size: 385/65 R22.5 Internal length: 13.33m Width: 2.6m Internal width: 2.46m Height: 4m Internal height: 2.65m

Condition: used, empty load weight: 7,850 kg, axle configuration: 3 axles, first registration: 10/2018, next inspection (TÜV): 11/2026, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2018, mileage: 153,767 km, Ref: W0013829 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lifting odometer, * Toolbox: 1, * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking rods on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22 Ijdpfx Acezupnkjhjba VIN: WSM000005210852 Tire dimension: 385/65 R22.5 Internal length: 13.33m Width: 2.6m Internal width: 2.46m Height: 4m Internal height: 2.65m

Year of construction: 2023, operating hours: 2,000 h, condition: used, Drive: Diesel-electric Power: 55 kW / 80 kVA Equipment: Predefinable fractions Quick-change system Centrifugal separator Duramax cleaning elements Split-speed system Extra-long conveyor belts Ibsdpfexrzymsx Achea Operating position: Length (mm): 12,700 Width (mm): 11,200 Loading edge (mm): 3,500 Discharge height (mm): 3,500 Transport dimensions: Length (mm): 11,950 Width (mm): 2,550 Height (mm): 4,000 Weight (kg): 25,000 OPTIONALLY available: Stone belt Tracked chassis Magnetic head rollers Air separator (windsifter) Automatic central lubrication And much more…

Condition: new, pressure 60 t stroke max. 300 mm bending capacity max. - flat 300 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 300 mm total power requirement 5,5 kW weight of the machine ca. 1530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 60 is a multifunctional machine among all presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. Ibedpfjxfb Ikox Achja The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: used, RENISHAW OMP 60 3D measuring probe SK40 Condition: Glass cover damaged, but function not affected. Ijdpfoy Dia Ijx Acheba

Condition: used, empty load weight: 8,446 kg, axle configuration: 3 axles, first registration: 02/2018, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2018, mileage: 556,803 km, Ref: 50961 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Electrical cable for refrigeration unit, * Fire extinguisher: 1, * Document box, * Side impact protection, * Lifting odometer, * Wheel chocks: 1, * Toolbox: 1, * Access ladder, * Rear door design: Rear portal doors, * Locking bars on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22, * Spare wheel holder: 2 Ibedpfx Aezk Rl Ajchea VIN: WSM000005200425 Tire size: 385/65 R22.5 Width: 2.6m Height: 4m

Condition: ready for operation (used), Indramat TRK6-4U-380 / 60-G0 / 527 - TRK6-4U-380/60-G0/527 6 pulse thyristor control amplifier, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Ibjdpor R Uqpjfx Achsa

Condition: new, functionality: fully functional, power: 2.8 kW (3.81 HP), fuel type: gasoline, color: yellow, operation weight: 58 kg, Year of construction: 2026, Equipment: UVV, Bomag BT 60 Tamper – NEW Bomag BT 60 Tamper – NEW | 15 kN impact force | 23 cm footplate | Honda GXR 120 gasoline engine | Operating hour and RPM counter Item number: 54100071 Technical data: Manufacturer: Bomag Model: BT 60 Condition: NEW Operating weight: 58 kg Impact force: 15 kN Footplate width: 23 cm Engine: Honda GXR 120 gasoline engine Engine power: 2.8 kW Fuel: Gasoline Starting system: Reversible start Highlights & Features: - Compact tamper for precise compaction work - Robust design – ideal for daily use on construction sites - 23 cm footplate – optimal for narrow trenches & edge areas - Honda gasoline engine – reliable & easy to maintain - Integrated operating hour and RPM counter - Made by Bomag – proven quality & immediately available Application areas: ✓ Pipeline & sewer construction ✓ Fiber optic & cable laying ✓ Garden & landscaping ✓ Municipal applications & construction companies ✓ Compaction work in confined areas & trenches Location: Warehouse D-46514 Schermbeck (North Rhine-Westphalia) – Inspection & collection possible Delivery throughout Germany & internationally on request Pricing ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Errors and prior sale excepted. Prices plus VAT Other models available! Also available with 16 cm, 20 cm & 28 cm footplates ➡️ New & used machines, accessories & spare parts Buy Bomag tamper | BT 60 NEW | Gasoline tamper 15 kN | Compaction equipment with Honda engine | 23 cm footplate | Bomag compaction technology | Tamper for sewer construction & trench compaction Your reliable partner for compaction technology & construction machinery: Ijdpezrdbyofx Achjba Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure immediately available new goods! If required, we will gladly arrange a virtual inspection of the machine via video call.

Condition: good (used), Year of construction: 2013, Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Iodpfx Aswp E Hzecheba Ejector Stroke: 106 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, 4 x used bitumen tanks, 60,000 liters each Iodpfx Aozqu Ubochoba - complete piping system available upon request.

Condition: used, Year of construction: 2014, operating hours: 1,869 h, load capacity: 3,000 kg, lifting height: 6,105 mm, fuel type: electric, construction height: 2,470 mm, Equipment: cabin, head guard, * Load capacity: 3000 kg * Max. lifting height: 6,105 mm * Overall height: 2470 mm * Own weight: 5969 kg * Free lift: 2145 mm * Battery voltage: 80 V Iedstruw Sspfx Acheba * Drive power: 15 kW * Unladen weight: 4,013 kg -----Internal vehicle number: 9592----Errors and prior sale excepted.

Condition: refurbished (used), Year of construction: 2027, pressing force: 60 t, Machine made to order: High speed press BSTA 60 Retrofit and general overhaul Ijdpfxjzlqlfo Achsba Conversion to electronic drive und new Unidor PC-control system. Tool area enlargement possible. Please contact us for detailed offers.

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Ibsdowtft Njpfx Achja Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: new, Year of construction: 2025, machine/vehicle number: 2440242, fuel type: diesel, motor manufacturer: Deutz TCD2.9L4-SV, General information Field of application: Construction Weights Empty weight: 1.600 kg Functional Ibjdpfx Acsyrbbrohsa Generator capacity: 60 kVA Dimensions of cargo space: 254 x 114 x 165 cm CE mark: yes Other information Fuel consumption: 9.8 Liter per hour at 75% Load Generator: LEROY-SOMER TAL042-H Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 250 l Production country: ES Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: ready for operation (used), KSB ETABLOC-G 50-160/114 ID: 48862505 pump with QU FS 90S4A-60 H motor, serial number: 163752M, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ibjdpfx Acszh Sc Rohsa

Condition: used, machine/vehicle number: 4131, Item No. Lg 34422 High-performance stamping press BRUDERER BSTA 60 H Ibjdjinzdlepfx Achja from current production. Stroke adjustment needs to be repaired. without soundproof cabin and without conveyor system. Feeder BBV 202/120

Condition: good (used), rotary table, rotary indexing table, controlled rotary table, rotary indexing table, rotary indexing table, indexing table, rotary table, compact rotary table -Manufacturer: Sopap, compact rotary table Iedpfxju Huune Achjba -Type: Ta 160-12-270-2-D -Clamping surface: Ø 240 mm, bolt circle Ø 200 mm / M12 -Speed: 8 rpm / 12 intervals -Brake: 40 Nm -Individual components: see photos -Dimensions: 700/610/H390 mm -Weight: 212 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Iedpochaynefx Acheba -Cylinder: approx. Ø 90 mm -Piston rod: Ø 60 mm -Pipe outer diameter: 120 mm -Stroke: 940 mm -Total length when retracted: 1510 mm -Piston tube mounting: Ø 25 mm -Piston rod mounting: Ø 35 mm -Ideal for building a hydraulic press -Quantity: 1 piece available -Weight: 80 kg