Used Berg & Schmid X-Tech 900 for sale (67,060)

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and Hodpofg E Hpefx Ac Nsfn thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Heavy-duty, fully hydraulic CNC bandsaw machine for automatic and economical cutting of solid and profile materials. Hfsdpfx Acszl Ulpj Nsn Key features: - Cutting range: round 410 mm or flat 410 x 410 mm - Modern 2-axis CNC control - Bandsaw blade monitoring with automatic feed rate adjustment - Inching function for the first cut, 15 mm min. remaining piece length - Stepless, frequency-controlled saw drive - Clamping pressure adjustment for thin-walled tubes and profiles - Hydraulically driven chip conveyor - Automatic double-sided bandsaw blade lifting device - Hydraulic bandsaw blade tensioning - Material feed via precision ball screw and linear guide Drive power: 5.5 kW Working height: 730 mm Paint finish: plating gray RAL 7036 and turquoise RAL 5018 Includes 1 bi-metal bandsaw blade 6150 x 41 x 1.3 mm

Year of construction: 2007, condition: good (used), machine/vehicle number: 073759001, Offer 22489 Technical data: Hedpfx Asim Ildoc Nofn - Cutting range at 90°: - Round: 320 mm - Flat: 320 x 320 mm - Material feed system - Saw band dimensions: 5095 x 34 x 1.1 mm - Cutting speed: 10 to 120 m/min - Hydraulic lifting and lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure, infinitely adjustable - Hydraulic material clamping device - Chip conveyor - Coolant system - Chip removal conveyor: 2500 mm - Drive: 400 V / 4.0 kW - Space requirement: approx. W 2500 x H 1950 x D 2000 mm - Weight: approx. 2200 kg

Condition: good (used), Year of construction: 2006, Berg & Schmid Xtech 410 CNC sawing machine Year of manufacture: 2006 Control: - CNC control, freely programmable Cutting range: - Round: 410 mm - Flat: 410 mm - Dimensions: approx. 3,500 × 2,000 × 2,200 mm - Working height: 730 mm Hsdpsz Ii T Dsfx Ac Nofn Cutting speed: - 12–110 m/min Equipment: - Material feed via precision ball screw and linear guide - Hydraulic saw blade tensioning - Automatic double-sided saw blade free-travel device - Hydraulically driven chip conveyor - Clamping pressure adjustment for thin-walled tubes and profiles - Frequency-controlled saw drive, stepless - Infeed automation for the first cut - Blade tracking system Saw drive: - 5.5 kW

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 580 kg, Precision aluminum circular saw machine VELOX 350 VA-MPS Hydro-pneumatic fully automatic model For saw blades up to 350 mm in diameter, mitre cuts left and right 45° and bevel cuts up to 45° left. Cutting range: - 90° 120mm round, 105mm square, 200x80mm flat Hsdpfxszpxh Ns Ac Njfn - 45° left 65mm round, 60mm square, 180x50mm flat - 45° right 115mm round, 100mm square, 150x80mm flat Standard features: • State-of-the-art micro-processor control with multi-function display • Safety package with the following functions: 1. Minimum inlet pressure monitoring 2. Clamping jaw monitoring/material tension • Hydro-pneumatic control of the saw head • Pneumatic double clamping device • Pneumatic vertical clamping device • Electro-pneumatic material feed unit • Vernier scale for fine length adjustment • Integrated coolant spray device • Connection nozzle for chip extraction system Speed 3600 min-1

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200 x 88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm Hfsdpfx Aezyva Roc Nsn capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,4 t dimensions 1,2 x 0,9 x 1,5 m Display machine - Never used - 45° left/right miter - Head tilts up to 45° for bevel cuts (compound cuts) - Pneumatic dual quick-clamping system - Includes micro-spray system - Includes carbide saw blades

Condition: used, Year of construction: 2009, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: Hjdpeyrhu Sjfx Ac Nefn • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, Saw motor: 1.5 / 1.8 kW Hfedszzvwrspfx Ac Nsn Saw blade size: 350 mm 2 saw blade speeds: 1400 / 2800 rpm Miter angle stepless: ±45°

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with Hfjdpjt Eacgefx Ac Non one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: used, Year of construction: 2023, functionality: fully functional, We are selling a bandsaw, Berg & Schmid GBS 242 DG HA-I, with a cutting speed of 25-90 m/min. The following equipment is included with the purchase: - Micro-spray system SET GBS 242, including spray nozzle, fluid reservoir, and 24V Plus mounting bracket. - Infeed roller conveyor, left side. Hodpfx Acoz Dnq Hs Nsfn - Infeed/outfeed adapter for URB 290/400, connection piece for the machine. - URB 290 universal roller conveyor, length 4000 mm. - Roller conveyor extension for miter angles up to 45°, extending to the left (infeed). - Outfeed roller conveyor, right side. - Infeed/outfeed adapter for URB 290/400, connection piece for the machine. - URB 290 universal roller conveyor, length 4000 mm. - Roller conveyor extension for miter angles up to 60°, extending to the right (infeed). - LM 55 DH/manual digital length stop, measuring length 4000 mm, including connection to the saw.

Condition: used, This Berg & Schmid metal circular saw, type: Perfect 300, will be auctioned online in our industrial auction / machine auction for BZB Behinderten-Zentrum-Boxdorf – including the metal circular saw, office furniture, three-wheeled tandem, and lighting. Hodpfx Asz Syl Tec Nefn You can find this and many other items on our platform.

Condition: excellent (used), Year of construction: 2011, Details Manufacturer: Berg & Schmid. Model: GBS250 Super AutoCut. Year of manufacture: 2011. Condition: in excellent working order. Cutting capacity Round materials (90°): Ø 250 mm Square materials (90°): 230 x 230 mm Round materials (45°): ± 210–220 mm Round materials (60°): ± 160–170 mm Saw blade length: ± 3,000 mm Hjdoy U Dykspfx Ac Nsfn Saw blade width: 27 mm Saw blade thickness: 0.9 mm Mitre angle & position Left mitre angle: 0–60° Right mitre angle: 0–45° Hydraulic saw arm with adjustable cutting pressure Dimensions Length: approx. 1500 mm. Width: approx. 1700 mm. Height: approx. 1800 mm. Weight: approx. 500 kg.

Condition: new, cutting diameter 185 mm Hfedpjvn Uzasfx Ac Nsn saw band length 2.085 x 20 x 0,90 mm table height 920 mm band speed 35 + 70 m/min connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 200 kg Berg & Schmid - GBS 185 Eco AutoCut Metal Band Saw Extremely fast and smooth sawing thanks to improved drive technology - Miter cuts up to 60° left - Suitable for dry and wet cutting - Coolant system - Machine base

Condition: new, Year of construction: 2023, BERG+SCHMID Aluminum Circular Saw Model VELOX 350 Manual Speed: 1800+3,600 rpm - Mitre left + right 45° - Head bevel cuts up to 45° (Schifter) - Ball bearing rotary table - Machine base - Highest cutting quality due to vibration absorption - Very smooth running cut Hjdpfxer Ilkto Ac Nofn - Pull-through start and high performance - Machine base with chip drawer Saw blade dimensions: 350x32mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Year of construction: 1995, condition: used, COMI SL2000 x 900 x 550mm Thermoforming Machine. S/No. 646 (1995) TECHNICAL DATA OF THE EQUIPMENT Max. frame inner size mm 2005 x 905 Scrap cutter motor power kW 3 Max. tool base size mm 2000 x 900 Scrap conveyor motor power kW 0.37 Hedpfsz I Sbdox Ac Nsfn Min. tool base size mm 700 x 500 Finished workpiece discharge belt motor power kW 0.75 Max. sheet size mm 2090 x 960 Cross-cutting motor power kW 0.25 Min. sheet size mm 790 x 560 Cross-cut scrap conveyor motor power kW 0.22 Max. tool height mm 800 (550+250) Transfer unit motor power kW 1.5 Maximum formed workpiece height mm 550 Auxiliary units max. consumption kW 5.10 Max. sheet stack height mm 1000 Max. installed power kW 375 Max. pallet height mm 180 Tempering unit power kW 52 Upper heating power kW 83.3 Power consumption at 70% load kW 262.5 Lower heating power kW 71.3 Vacuum pumps capacity m3/h 750 (250x3) Upper preheating power kW 52 Tool vacuum tank capacity L 2000 Lower preheating power kW 46.8 Bell vacuum tank capacity L 2000 Oil pump motor power kW 19 (15+4) Required oil quantity L 600 Vacuum pump motor power kW 23.4 (7.8x3) Required air pressure kPa 600 Sheet centering motors power kW 0.24 (0.12+0.12) Incoming water pressure kPa 200-300 Sheet feed motor power kW 2.2 Max. hydraulic operating pressure MPa 18 Sheet feed width-adjustment motor power kW 2.2 Hydraulic operating pressure MPa 10 Sheet picker motor power kW 0.37 Incoming water temperature °C 12-20 Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: new, cutting diameter 360 mm Hedpewg Sflofx Ac Nefn saw band length 5050 x 41 x 1,3 mm cutting width 1,3 mm cutting speed 15-100 m/min total power requirement 4 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3,0x 2,6 x 2,2 m The X-SMART 4 ??is an automatic 2-column band saw suitable for straight cuts in solid materials with a diameter of up to 360 mm. Other features include: 4 kW drive motor with 41 mm saw blade width Modern 7" touchscreen CNC control Inclined saw frame Solid 2-column structure Linearly guided material sensor Hydraulic cutting pressure regulation 500 mm feed unit Double vise 2 vises in front of and 2 vises behind the saw blade Electrically driven chip conveyor Cleaning gun Full enclosure LED work light Minimum remnant length 100 mm Optionally available: Bundle clamping device; MMS and roller conveyors

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm Hfsdpfsxabacjx Ac Nen capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Condition: new, Year of construction: 2010, functionality: fully functional, space requirement width: 2,700 mm, space requirement length: 3,500 mm, space requirement height: 2,600 mm, overall weight: 5,200 kg, pressure: -1 bar, operating pressure: 6 bar, temperature: 200 °C, filter area: 2.5 m², operating temperature: 200 °C, Reference: C13598 316 stainless steel ATEX nozzle filter drier, 3V Tech 250 FPP/SD FM, with 2.5 m² of filtration surface. Unused equipment, designed for solid-liquid separation processes in the chemical and pharmaceutical industries. Material 316/316L stainless steel Technical specifications Model 250 FPP/SD FM Year of manufacture 2010 Body working pressure -1/+6 bar Body working temperature -25/+200 ºC Total body volume 3450 L Case/jacket working pressure -1/+10 bar Case/jacket working temperature -25/+200 ºC Case/jacket volume 80 + 20 L Equipment configuration ATEX Electrical panels Bag filter Hedpfxswpf Sqs Ac Nefn Hydraulic unit Centrifugal pump Transport information Length 3500 mm Width 2700 mm Height 2600 mm Weight 5200 kg Documentation CE certificate Certificate ATEX Maintenance Manual Operating Manual Drawings Electrical Diagrams Filtration Area Filtration Area 2.5 m² Condition Unused Manufactured by 3V TECH

Condition: used, Year of construction: 2025, cutting diameter 220 mm saw band length 2455 x 27 x 0,9 mm cutting width 230 mm Hsdpfxez N Hv Hs Ac Nsfn cutting speed 35-74 m/min m/min total power requirement 1,2 kW weight of the machine ca. 250 t dimensions of the machine ca. 1,6 x 0,9 x 1,8 m The GBS 218 Eco AutoCut is a precision miter band saw designed for use in workshops and light industrial settings. It is ideally suited for cutting steel, stainless steel, and aluminum profiles, combining a powerful range of features with user-friendly operation. Thanks to the integrated AutoCut system, the machine offers three selectable operating modes: automatic saw frame lowering with adjustable feed rate, rapid approach to the workpiece, and manual operation with a braking cylinder function. This versatility makes it ideal for a wide variety of sawing requirements. Key features: - Miter cuts up to 60° to the left - Two-stage selectable cutting speed: 35 + 70 m/min - Vise with quick-clamping mechanism - Carbide saw blade guides - Automatic electric coolant system - Optional: Minimal quantity lubrication for improved cooling and lubrication

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm Hfjdpfxed Iipmo Ac Nen total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: good (used), Year of construction: 2016, machine/vehicle number: 163231001, Technical data: - Saw blade dimensions: 3375 x 27 x 1.1 mm - Cutting speed, continuously adjustable: 18 - 100 m/min - Hydraulic cutting pressure control - Hydraulic lifting and lowering of the saw frame - Machine table can be swiveled to the left and right for miter cuts - Cutting range - at 90°: round 255 mm - square: 240 mm - flat: 300 x 180 mm - at 45°: round 210 mm - flat: 200 x 160 mm - at 60°: left, round 135 mm - Max. opening width of the vise: 310 mm - Drive: 400 V / 2.2 kW - Space requirement: approx. W 2000 x H 1500 x D 2100 mm - Weight: approx. 990 kg - Includes: - Infeed roller conveyor: 5000 mm - Outfeed roller conveyor with measuring stop: 5000 mm Hfodpfxez I Rkdo Ac Njn

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Hodpfx Acsfgyifj Nsfn Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly Hfedpfx Ajfgyigjc Njn “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! Hfsdpfx Ajfg E Hlsc Non 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 130 mm capacity 90 degrees: square 130 mm 130 x 125 dimensions of saw-band 1440 x 13 x 0,65 mm dimensions 350 x 690 x 520 m band speed 30 - 80 m/min Hfjdpjfv Aq Usfx Ac Non total power requirement 1,2 kW weight of the machine ca. 19 kg Action Price!! Berg & Schmid - assembly band saw PBS 130 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60°