Used Berger Lahr Wpm 311.004-00 for sale (34,548)

Condition: good (used), Motor control, controller, converter, stepper drive, stepper motor control, frequency converter Gbodjn Nbmwjpfx Afusu -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

Condition: ready for operation (used), SIG Positec Berger Lahr linear positioning system LP-A + gripper unit, consisting of: LP-A (X=300/Z=100), VRDM 3910/50 LWB motors, UCH 325V, IN 2A, MN 4Nm, ROBA-stop-M 4/891.124.1 SO, 24V, 22W, 6Nm, used, in very good condition, 100% functional. Gbedpsi Eclyefx Afuou

Condition: used, Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WD5-008.151-00 -Quantity: 2x controllers available -Price per piece -Dimensions: 310/60/H180 mm Gbjdpon Nbnmsfx Afuju -Weight: 2.5 kg/pc.

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation Gbsdsyuuzdjpfx Afuou • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: used, Year of construction: 2022, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Load capacity forklift: 3,000–5,000 kg Fork length: 1,350–2,350 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 1,000 x 1,000 mm Gedpfjz Iw D Dsx Afusbu Self-weight: 200 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1081

Condition: ready for operation (used), Berger Lahr VRDM 397/50 LWC SIG Positec 52525035600 stepper motor, serial number: 9735750 with encoder, used, in good condition, 100% functional, delivery as per photos. Gbodpfew Ikbmox Afuou

Condition: ready for operation (used), Berger Lahr SR 5-20.500.1 servo stepper motor controller, used, 100% functional. Gedpfx Aoi D E I Isfuobu

Condition: excellent (used), Different Heidelberg CTP Servo-controller for Suprasetter Gedezwfzxjpfx Afusbu PL.570.3000-02 BERGER-LAHR Servo Controller for M3 drive motor for Suprasetter 74/75/105 Classic & A105 PL.572.3100-0x SCHNEIDER Servo Controller for Suprasetter A52/74/75 GEN. 1+2 PJ.105.100F/0x SCHNEIDER Servo Controller for Suprasetter A52/75 GEN. 3+4 (>2009) second-hand, tested All offer subject to prior sale

Condition: new, SIG Positec / Berger Lahr TLC 532 F servo drive SN:1110070929, unused in opened original packaging, 100% functional, delivery as per photos Gbsdpfxjz Acx Se Afusu

Condition: good (used), Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm Gjdpfx Aoi I Hdcefusbu -Weight: 74kg

Condition: ready for operation (used), Berger Lahr VRDM397/50LWCEB / BRS397W361FCA stepper motor, serial number: 2404104758 + Binder 76 43108H07 rotary encoder. Connector partially broken, see photo. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Gbsdpfx Afsi D E Npsuju

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K Gjdpfx Afopvqzaeuebu -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Condition: used, Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm Gjdpfeq Adp Rsx Afuobu -Weight: 2.5 kg

Condition: new, Year of construction: 2026, WTG piercing bag sander and planer knife grinding machine Description: For an accurate and efficient work perfectly honed, razor-sharp cutting edge is an absolute must . With our grinder to sharpen your tools quickly , easily, accurately and inexpensively grind wood chisel (holly bag) , planer knives , chisels , chisel Advantages Very precise , stable and durable design Fast, in just 30 seconds you grind a perfect gratlose Just cut Extremely to use, even for apprentices and unskilled dry grinding principle, ie no problems with moisture ( water / oil) Infinitely variable cutting angle setting, you buy fewer new tools , resulting in lower maintenance and fixed costs. Made in SWITZERLAND = Swiss Quality Where the WTG is used : Wherever conventional wood is processed. For example, in carpentry , joinery , carpentry , schools, trade schools , training centers / training workshops. Structure of the grinding machine : The WTS is driven by a powerful 500 watt motor . When trolley is a dust-proof , high-precision ball bearings and profile rail guide as it is a thousand times used in machine tools , industrial robots and precision special machines. The stepless grinding service is realized by a precise and self-locking dovetail guide. The tool clamping is safe and stable over a parallel clamping system. Our WTG grinder has a unique price -performance ratio. See for yourself , or let us advise you . Specifications: Weight: 19 kg , weight : approx 55 x 35 x 30 cm , Connection: 230 V / connector type J , Motor: 500 watts , speed : 3000 r / min. Sandable tool width : 5-60 mm Cutting angle adjustment : 25 - 30 degrees continuously Main grinding wheel : Special fused alumina ø 100 mm polishing wheel / buffing wheel : special-type ROTAX ø 150 mm Other polishing and grinding wheels on request. Price EUR 2'100 .00 Shipping costs Gbsdpfx Aobxudkofusu The company BERGER technology GmbH is worldwide for decades one of the leading manufacturers of high quality drill and tool grinding machines, multi spindle drill heads as well . Contact: Mr. Marc Broennimann

Condition: used, axle configuration: 3 axles, first registration: 01/2007, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2007, Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Tire tread depth left: 12 mm; Tire tread depth right: 14 mm Godpfjz N E Eaox Afuebu Rear axle 2: Tire tread depth left: 8 mm; Tire tread depth right: 5 mm Rear axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 4 mm Damage: None

Condition: used, maximum load weight: 28,340 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2014, next inspection (TÜV): 10/2028, Year of construction: 2014, Internal vehicle number: VTC30057 Available immediately More information at: Luis Lucena Viktoria Sologubova Berger SAPL 24 SATA tank semi-trailer – 35 m³ – 4 compartments – 3 axles Used Berger ecotrail tank semi-trailer, type SAPL 24 SATA, manufactured in 2014. According to the seller, the three-axle semi-trailer has a total capacity of 35 m³, divided into four compartments. Gbodozfuqrjpfx Afueu With a permissible gross weight of 35,000 kg and an unladen weight of 6,660 kg, the payload is 28,340 kg. Technical data: * Vehicle number: VTC30057 * Vehicle condition: Used * Category: Tank semi-trailer * Manufacturer: Berger Fahrzeugtechnik * Product line: Berger ecotrail * Type: SAPL 24 SATA * First registration: 10/2014 * Year of manufacture: 2014 * Axles: 3 * Permissible gross weight: 35,000 kg * Unladen weight: 6,660 kg * Payload: 28,340 kg * Tank volume approx.: 35 m³ * Number of compartments: 4 Data according to manufacturer's identification plate: * Manufacturer: Berger Fahrzeugtechnik Ges.m.b.H. * Country of manufacture: Austria * Vehicle identification number: VA9USLAKTDFZT0437 * EC type-approval number: e42007/460339*02 * Technically stated total mass: 39,000 kg * Permissible fifth-wheel load: 11,000 kg * Technically stated fifth-wheel load: 12,000 kg * Permissible axle load: 3 × 8,000 kg * Technically stated axle load: 3 × 9,000 kg Inspection and functional testing are possible by prior arrangement. Further information, photos and videos are available upon request. Subject to errors, changes and prior sale. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, axle configuration: 3 axles, loading space length: 136,300 mm, loading space width: 24,800 mm, loading space height: 29,500 mm, total width: 25,500 mm, total height: 40,000 mm, Year of construction: 2023, Equipment: ABS, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front - Disc brake system = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at [phone number]). Berger SAPL 24 LTMN, flatbed/curtain-sided trailer SAF axles, Wabco ABS, spring brake, disc brake, sliding tarpaulin (side), sliding cover, lifting roof, air suspension, 1st axle liftable, tire tread: 1st axle 5-7mm, 2nd axle 4-5mm, 3rd axle 4-5mm, cargo space dimensions: length: 13,630mm, width: 2,480mm, height: 2,950mm, permissible total weight: 35,000kg, unladen weight: 5,180kg, payload: 29,820kg. Gedpfey Tg D Nox Afuebu Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. [phone number]) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale excepted !!! = Further Information = Unladen weight: 5,180 kg Payload: 29,820 kg GVW: 35,000 kg Please contact Tobias Ebert for further information.

Condition: used, empty load weight: 5,170 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2014, suspension: air, tire size: 435/50 R19,5, Year of construction: 2014, Equipment: ABS, Tare weight: 5170kg, GVW: 35000kg, Cargo securing with certificateTyre size: 435/50 R19.5, DIN EN 12642 (code XL) certificate, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, Fire extinguisher holder, Toolbox, Sliding roof, 1x15 and 2x7 pin plug, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Gbedpfx Aezvh Ufsfusu

Condition: used, maximum load weight: 29,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2018, Year of construction: 2018, Equipment: ABS, * Berger 3-axle sliding tarp semi-trailer * Air suspension * BPW axles Gjdpfx Ajzx I S Asfuobu * Drum brakes * Edscha cover * ABS * ABS

Condition: used, empty load weight: 5,170 kg, axle configuration: 3 axles, first registration: 08/2014, Year of construction: 2014, Tare weight: 5170kg, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Gbjdpezxk Itefx Afuou

Year of construction: 2016, condition: used, Name: Used Centrifugal Fan Manufacturer: REITZ Type: KXE 050-035530-00 Year built: 2016 Speed: 2.960 / 2.809, max.: 3138 rpm Driving force: 45 kW Throughput m³/h: V= 355 m3/min Material: regular steel Dimensions: L 2.300 x W 1.200 x H 1.420 mm Empty weight: Approx. 900 kg Technical doc.: yes, in German language Message: Intake temperature 20° and max. temperature 80°. Is unused, therefore as good as new! Accessories: Legs Condition: Used Godoz Innajpfx Afuebu Price: On request

Condition: used, empty load weight: 5,676 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2025, next inspection (TÜV): 11/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, color: grey, Year of construction: 2025, mileage: 84,001 km, Equipment: ABS, Unladen weight: 5676 kg, permissible total weight: 35000 kg, cargo securing system with certificate, cargo space (L W H): 13,620 mm x 2,480 mm x 2,680 mm, tire size: 385/65 R22.5, certificate DIN EN 12642 (Code XL), cargo space volume: 90 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, lift axle in front, pallet box, electronic braking system EBS, tool box 2x, portal doors, sliding tarpaulin, connector plug 1x15 and 2x7-pin, telematics system, tarpaulin system: Power Curtain. You can find our entire vehicle range at . Would you like financing? With our Value Added Services, we offer you individual financing options, full-service, and telematics services. We will be happy to advise you. Gbedpfx Asz Edmgsfuou

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Godszw Ucxjpfx Afuobu Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Gbsdozw Ug Repfx Afuju Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: used, Year of construction: 2001, 2001 Kellenberger CNC Grinder KEL-VARIA RS175/1000 Gbsdpfeywftdox Afusu