Used Blade - 1 Piece for sale (100,006)

Condition: new, 750x30x5/6.8xZ=60 (e.g. Kretzer Rotomat 5L) Laodps Ab Sn Dsfx Ahash

Condition: new, Metal bandsaw MBS 105, 1335x13x0.65mm, 30-80 m/min, 0.85 kW, METALLKRAFT · Variable cutting speed · Special gearbox · DC drive motor · Amperage monitoring to prevent overload · Cast band wheels with ground running surface · Robust aluminum die-cast saw frame Lsdo Ab Hr Depfx Ahajah · Adjustable saw blade guides · Stable, non-slip base plate · Other technical features: Table width: 320mm · Weight: 18kg · Table length: 720mm · Mains voltage: 230 V / 50 Hz Cutting range for rectangular tubes: 45° / 90°: 70 x 70 / 101 x 105 mm Saw band dimensions: 1335 x 13 x 0.65 mm Cutting speed: 30-80 m/min Cutting range for square tubes: 45° / 90°: 70 / 105 mm Mains voltage: 230 / 50 V / Hz Cutting range for pipes Ø: 45° / 90°: 70 / 105 mm Weight: 18 kg Motor power: 0.85 kW

Condition: new, • High-quality product from Austria Ljdps Adg Rlsfx Ahaoah • Shield width: 1,850 mm • High-strength steel construction • Chain-link guard strip included as standard • Attachment: 3-point linkage, Category II • Integrated tow hitch • Incl. support leg • Low dead weight: 250 kg

Condition: new, Carbide-tipped circular saw blades LFZ = Long-cutting, flat-tooth design with chip ejector Lsdpfxe Abqqdj Ahasah Made in Germany

Condition: new, Miter saw 352 L, blade length 550 mm, cutting height 100 mm, table length 440 mm · Precision design · With length adjustment for processing wood, plastics, iron and non-ferrous metals · Guide slide with deep precision grooves for safe and accurate blade guidance, sliding vertically in two robust pairs of round rods on the rotating rail · Rotating rail mounted at its pivot point on a robust steel pivot pin with an adjustable segment arc guide · Segment arc with precise centering for detent locking at 90°, 45°, 36°, 30° and 22.5° angle cuts Lajdpfx Ahj Abz Tcsaeh · Adjustment to any other angle possible using a template · Tension saw with a ready-to-use blade for wood · Can be hung on an eyelet on the front guide slide in the rest position, with automatic release during cutting · Quick and convenient blade change by loosening the wing nut below the handle · Other technical features: table height: 45 mm · Cutting accuracy: 0.05 mm · Table length: 440 mm · Fence length: max. 650 (on both sides) mm · Tooth spacing: 1.75 mm · Table width: 75 mm Model: 352 L Blade length: 550 mm Table height: 45 mm Cutting width: at 90°: 160 mm, at 45° (square): 100 mm, at 36° (pentagon): 120 mm, at 30° (hexagon): 130 mm, at 22.5° (octagon): 140 mm Tooth spacing: 1.75 mm Cutting accuracy: 0.05 mm Table length: 440 mm Table width: 75 mm Cutting height: 100 mm Fence length: max. 650 (on both sides) mm

Condition: new, for longitudinal and cross cuts in natural wood Diameter: 750 mm Bore: 30 mm Lasdpfx Ao Ab Ntdshajh Teeth: 46 Cut: 4.5/3.5 mm

Condition: new, - with specially alloyed carbide-tipped teeth and a special tooth geometry - for fine cutting and longitudinal cuts in construction lumber, plastics, composite materials, and aluminum - NAIL-PROOF Diameter: 800 mm Lodpfx Ae Ab R Agohajah Teeth: 96 Bore: 30 mm Cut: 6.0/4.5 mm

Condition: new, - Top quality, manufactured in West Germany Ljdo Ab Rr Uopfx Ahajah - Fitted with hard metal teeth - Also suitable for hand-held circular saws, miter saws, and compound miter saws - Noise reduction achieved through special laser slits - Features auxiliary holes and keyway grooves related to the diameter - Extremely durable - For timber, boards, and planks; round and square timbers with concrete reinforcement and nail remnants, as well as gas concrete, etc. Bore: 30 mm Teeth: 84 Diameter: 700 mm Kerf: 4.2 mm

Condition: new, - Top quality from Western Germany Ljdpfx As Ab Rr Ijhasah - Fitted with carbide tips - Also suitable for hand-held miter and compound saws - Noise reduction through special laser slots - With secondary holes and keyways related to the diameter - Exceptionally durable - For construction lumber and boards; round and square timbers with concrete fittings and nail remnants, as well as aerated concrete, etc. Diameter: 600 mm Teeth: 78 Kerf: 4.0 mm Bore: 30 mm

Condition: new, - with specially alloyed carbide teeth and a special tooth geometry - for fine cutting and longitudinal cuts in construction timber, plastics, composite materials, and aluminum - NAIL-PROOF Ljdj Ab R Aaepfx Ahasah Cut width: 4.2/3.2 mm Diameter: 700 mm Number of teeth: 84 Bore: 30 mm

Condition: new, Special HM saw blade for circular saws, 700x6.0x4.0x30, Z=60, with center hole. Suitable for circular saws and sawing machines from various manufacturers. For example, for Kretzer Rotomat 4L. Diameter: 700mm Bore: 30mm Lajdpfx Ahs Ab Rq Roaeh Blade thickness: 4mm Kerf: 6mm Teeth: 60 Tooth geometry: Alternate top bevel (ATB)

Condition: new, Very robust, hardened special cutting blade 6 mm wide Made from high-strength carbide steel Laedpfx As Adipwshash Very wear-resistant Specifically designed for stony, hard, and highly compacted soils Part number in the spare parts list: 10-0354

Condition: new, - Top quality, made in Western Germany - Fitted with carbide tips - Diameter-dependent expansion slots - With chip deflector 41 LFZ II - For woodworking; coarse cutting performance Lsde Ab I E Sjpfx Ahaeah Cut: 4.2 mm Bore: 30 mm Teeth: 42

Condition: new, - Top quality, manufactured in West Germany - Fitted with hard metal teeth - Also suitable for hand-held circular saws, miter saws, and compound miter saws - Noise reduction achieved through special laser slits - Features auxiliary holes and keyways relative to the diameter - Extremely durable Laodpj Ab Rrzofx Ahajh - For softwood and hardwood lumber, including round and square timbers with concrete reinforcement and nail remnants, as well as gas concrete, etc. Bore: 30 mm Diameter: 500 mm Kerf: 4.0 mm Teeth: 72

Condition: new, - with specially alloyed carbide teeth and a special tooth geometry - for fine cutting and longitudinal cuts in construction lumber, plastics, composite materials, and aluminum - NAIL-RESISTANT Laedpe Ab Rz Nsfx Ahaoh Teeth: 78 Bore: 30 mm Diameter: 600 mm Cut width: 4.0/2.8 mm

Condition: new, for longitudinal and cross cuts in natural wood Lodpfx Ahj Ab Nvfeaeah Diameter: 700 mm Cut: 4.6/3.2 mm Teeth: 42 Bore: 30 mm

Condition: new, for longitudinal and cross cuts in natural wood Lajdpfs Ab Nr Tsx Ahajh Diameter: 650 mm Bore: 30 mm Cut: 4.2/3.0 mm Teeth: 40

Condition: new, - Top quality from Western Germany - Fitted with carbide tips - Also suitable for hand-held miter saws and compound miter saws - Noise reduction through special laser slits - With secondary holes and keyways related to the diameter - Extremely durable - For timber, boards, and planks; round and square timbers with concrete reinforcement and nail remnants, as well as aerated concrete, etc. Ljdpo Ab Rrhofx Ahaeah Diameter: 400 mm Teeth: 60 Bore: 30 mm Kerf: 3.5 mm

Condition: new, - with a special alloyed carbide tooth and special tooth geometry - for fine cutting and longitudinal cuts in construction lumber, plastics, composite materials, and aluminum - NAIL-PROOF Ledj Ab Rzcjpfx Ahajah Bore: 30 mm Cut: 3.2/2.2 mm Teeth: 48 Diameter: 315 mm

Condition: new, - with a specially alloyed carbide cutting tooth and a special tooth geometry - for fine cutting and longitudinal cuts in construction timber, plastics, composite materials, and aluminum - NAIL-RESISTANT Teeth: 60 Lasdj Ab Rzpopfx Ahaoh Cut: 3.5/2.5 mm Diameter: 400 mm Bore: 30 mm

Condition: new, - Top quality, made in West Germany - Fitted with carbide tips - Also suitable for hand-held miter and compound saws - Noise reduction thanks to special laser slits - With secondary holes and keyways related to the diameter - Extremely durable - For construction lumber and panels; round and square timbers with concrete reinforcement and nail remnants, as well as aerated concrete, etc. Cut thickness: 3.2 mm Diameter: 350 mm Teeth: 54 Bore: 30 mm Lsdpfo Ab Rrbox Ahajah

Condition: new, - Top quality, made in West Germany - Equipped with carbide tips - Also suitable for hand-held miter and compound saws - Noise reduction through special laser slits - With secondary holes and keyway grooves related to the diameter - Extremely durable - For framing lumber and boards; round and square timbers with concrete reinforcement and nail remnants, as well as aerated concrete, etc. Diameter: 450 mm Teeth: 66 Kerf: 3.5 mm Bore: 30 mm Lasdo Ab Rruspfx Ahaoh

Condition: new, - with a specially alloyed carbide-tipped tooth and a special tooth geometry - for fine cutting and longitudinal cuts in construction lumber, plastics, composite materials, and aluminum - NAIL-RESISTANT Teeth: 54 Cut: 3.2/2.2 mm Diameter: 350 mm Ljdpo Ab Rzijfx Ahaoah Bore: 30 mm

Condition: new, - with a specially alloyed carbide-tipped saw tooth and a special tooth geometry Laodps Ab Rzvsfx Ahaeh - for fine cutting and longitudinal cuts in construction timber, plastics, composite materials, and aluminum - NAIL-RESISTANT Diameter: 450 mm Cut width: 3.5/2.5 mm Bore: 30 mm Teeth: 66

Condition: new, - with a specially alloyed carbide cutting tooth and a special tooth geometry - for fine cutting and longitudinal cuts in construction lumber, plastics, composite materials, and aluminum - NAIL-PROOF Diameter: 500 mm Cut: 4.0/2.8 mm Bore: 30 mm Teeth: 72 Lodpfo Ab Rz Aex Ahaeah