Used Brenta Verticale Bandzaag / Automat. Draaiwagen for sale (21,357)

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us. Pjdpfx Aeyxhq Ueqlspw

Condition: excellent (used), machine/vehicle number: 406341 S222 N7804, BRENTA ETYELEC Industrial Band Saw Robust industrial quality – built to last for generations Podpfx Aozqmhgjqlepw For sale is a BRENTA ETYELEC industrial band saw, manufactured by Ateliers de Construction Louis Brenta SPRL (Belgium). This machine comes from a professional Dutch sawmill and was used reliably there for decades. It has been regularly maintained and is in good technical condition. Technical data Manufacturer: BRENTA Type: ETYELEC Motor power: 60 HP (approx. 44 kW) Speed: 340 rpm Band wheel diameter: 1,400 mm Heavy-duty industrial design Suitable for professional continuous operation Condition Band wheels overhauled New bearings on the band wheels Smooth and low-vibration operation Guides and idler pulleys in good condition Ready for immediate use Special features We are deliberately waiting with the disassembly of the machine so that interested parties can still inspect and test the machine while it is running. This gives you the opportunity to personally verify the function, smooth operation, and technical condition of the machine. Advantages Extremely robust construction High cutting accuracy Easy-to-maintain design Proven BRENTA quality Suitable for soft and hardwood Ideal for professional sawmills and woodworking companies This machine was built in a time when industrial machines were designed for a lifespan of decades. Thanks to its robust construction and high-quality workmanship, it is still a reliable investment today. We will gladly provide you with the technical data, dimensions, and drawings upon request. Inspection and demonstration in running condition are possible by appointment. We are available for further information, additional photos, or videos.

Condition: excellent (used), DIMER firewood processing machine, complete with vibrating chutes. Ppsdpfeznxgpjx Aqlew

Condition: used, Year of construction: 1998, LBL Brenta Oxia -max. cutting height 150mm Podovw Rnbjpfx Aqlepw -max. passage width 1000mm -multi-blade saw with fixed saw attachment

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Gorzow Wielkopolski. Ppedpfscudizox Aqlow Conditions of delivery Cost of delivery Client cover startup type negotiated Description Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Condition: excellent (used), For sale: professional pallet strapping system from the renowned German company ErgoPack. Model 725E is a fully electric device that facilitates safe and fast pallet strapping without the need for bending down – ideal for warehouses, logistics, and production environments. KEY ADVANTAGES - Automatic strap guiding around the pallet - 24V electric control - AUTO, MANUAL, SOFT operation modes - Adjustable strap tension - Maximum tensioning force up to 2500N - Ergonomic handling for operator comfort - Mobile, wheeled construction - Swiss quality craftsmanship (Swiss Made components) TECHNICAL DATA Pedpfx Aeyw Iagjqlopw Manufacturer: ErgoPack Deutschland GmbH Model: 725E Power supply: 24V DC Max strap tension: 2500N Condition: used, in good technical condition Charger included CONDITION The device is complete. Shows normal signs of use from operation. Control panel works, the machine is ready for use. APPLICATIONS - Warehouses - Logistics centers - Production - Pallet transport and packaging

Condition: used, Year of construction: 1997, operating hours: 0 h, functionality: fully functional, machine/vehicle number: 00000, ROUND LOG INFEED AND CUTTING LINE - Round log infeed to band saw in a two-part design - Cutting line, 4-4.5-5-5.5 meters (manually and continuously adjustable) with conveyor for sections and sawdust separator, as well as a robust sawdust screw conveyor - Automation and control system, as well as sensors for automatic/continuous cutting - "Nigger" (likely a mis-translation or colloquial term) for positioning logs on the bogie carriage SAWING AND CONVEYING - Carriage: Primultini electric with 2 log turners, length 5.70m • Clamping block 1-2: 86cm • Clamping block 2-3: 145cm • Clamping block 3-4: 220cm - Block band saw BRENTA, roller width 130mm, with control panel for all systems - Trimming band saw BRENTA, roller width 130 - PAUL KMEL edging saw, year of manufacture 1974 Incl. roller conveyors for infeed and outfeed Incl. control system and spare parts Incl. crosscut saw for cutting the boards to length - Edging saw “old” type CORONA - Roller-chain conveyors for all saws, as shown in the photos Ppodpfxezbtq Re Aqlow

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. Ppodpofy T Arefx Aqljw The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Condition: used, Year of construction: 1996, Technical details: weight of the machine ca.: 1750 kg sawing motor: 2,2 kW total power requirement: 5 kW cutting speed: 17 - 90 m/min cutting diameter: 320 mm cutting range max.: 320 x 320 mm saw band length: 4.930 x 34 x 1,1 mm feed length: max 9x 600 mm dimensions of the machine ca.: 2,6 x 2,4 x 1,40 m Bandsaw automatic, straight cut, min. cutting diameter 10mm, Ppsdpjvpt Eyjfx Aqljw min. cutting length 6mm, min. offcut 15mm (automatic 80mm), max. weight of material 400kg/m, coolant box 60l, pump 16l/min, clamping pressure 20-60bar, dimensions: chipconveyor 2.400x 950mm roller track 2.200 x 950mm, 5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual, *

Condition: excellent (used), Year of construction: 1984, I sell the vertical band saw Brenta Paril. Condition very good. Available immediately. Ppsdpfx Aqswinkcolew

Year of construction: 2004, condition: good (used), LBL Brenta Spaner CT 700 Max. cutting depth = 150 mm Max. cutting height = 650 mm Free central blade, overheating protection Clearance = 800 mm Fast, precise positioning via servomotor with electrical system. Ppodsyuc Nispfx Aqlsw

Condition: used, For sale: BRENTA industrial log bandsaw with Progress log carriage Heavy-duty BRENTA industrial log bandsaw (bandsaw / frame) including Progress log carriage, from a professional sawmill. Technical data - log bandsaw Manufacturer: Ateliers de Construction Louis Brenta SPRL (Belgium) Model: ETYELEC Machine serial number: 406341 Motor power: 60 HP (approx. 44 kW) Speed: 340 RPM Bandwheel diameter: Ø 1,400 mm Condition Bandwheels and frame overhauled and ground approx. 1 year ago New bearings on the bandwheels Runs smoothly Progress log carriage Pedox Ndphjpfx Aqljpw Heavy-duty industrial design Mechanical roller conveyor with chain drive

Condition: refurbished (used), FORTUNA AUTOMAT A3 weight range: 0.35 to 85 grams Circular knitting machine, single-needle version only Stainless steel blades, new Stainless steel protection, front and side New control cable, oil – everything is new As good as new, even better... Psdpfxsgg S Dho Aqlepw Completely overhauled, like new with 3 working plates 16 Ah connection

Condition: reconditioned (used), Fortuna Roll Press/Dough Dividing Machine, Size 3, for dough pieces weighing from 35 to 85 grams. The machine has been refurbished and repainted. Equipped with 3 forming plates. 4x16 Ah connection. Psdsc Utkaepfx Aqlepw The machine is in excellent working order and can be put into operation immediately. If you have any further questions, please contact us. Thank you.

Condition: good (used), For sale: - Injection molding machine, EPS pre-expander, automatic line for EPS (expanded polystyrene) box production – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which facilitates disassembly and labeling of individual connections for the buyer. - Complete machine, ready for connection to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermo boxes and fish boxes, 3 sizes, with or without holes, with lids – total of 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - Set includes intellectual property rights to the box and fish box designs – full documentation provided. IMPORTANT! The machine can also be used to produce EPS construction shapes for walls, ceilings, etc. – see examples in one of the photos. We also have other production line components available. Check our other listings. We also have additional equipment for sale such as: Ppedpeua Dqisfx Aqljw - Injection molding machine, EPS pre-expander, automatic line for EPS foundation boards + mold for boards - EPS batch pre-expander - Steam installation: boiler house – machinery - 3 m³ steam tank - Installation for transporting expanded EPS - EPS silos - EPS crusher - Many spare parts Additional photos and information available upon request by email. Option to sell individual components of the set separately.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: X12199, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,580 kg, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning length: 320 mm Turning diameter: 32 mm MACHINE DETAILS Ppodpfszlqdzox Aqlow Total weight: 2,850 kg EQUIPMENT Citizen C32-VIII (year of manufacture 2007) LNS Express 332 bar feeder Chip conveyor Parts conveyor belt

Condition: ready for operation (used), Year of construction: 2011, operating hours: 8,733 h, functionality: fully functional, spindle bore: 26 mm, rotational speed (max.): 7,200 rpm, number of axes: 5, number of tool turrets: 2, Long-turn lathe with an extended accessory package and spare parts! Counter-spindle: Completely re-conditioned 05/2026 TECHNICAL DETAILS CNC control: GE Fanuc Series 18i-TB Number of axes: 5 Axes: X1, X2, Y, Z, C Spindle Spindle speed: 50–7,200 rpm Spindle bore: 26 mm Spindle stroke: 160 mm TURRET Number of turrets: 2 Positions per turret: 6 Pjdpeznyrtsfx Aqlspw MACHINE DETAILS Motor power: 3.7 kW Weight: 2,600 kg Spindle hours: 8,733 h Control on: 10,642 h Feed time: 3,257 h Part counter: 478,135 EQUIPMENT - Bar feeder FMB Turbo 3-36, year of manufacture 2011 - Chip conveyor - Package of fixed and powered tool holders - Package of collets and guide bushings - Discharge system for long parts including reduction sleeves - Double-cone clamping system on the main spindle, system JBS - Breakage detection for cut-off tools, Detector France - Ejection control, Detector France - JBS guide bushing, not yet installed - Tool presetting device with optics for external tool setup - Replacement worms for chip conveyor - Mounting device for adjusting the cylinder of the working hood - Various spare parts

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes Ppjdpfx Ajy In Avsqlew

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Ppjdpfx Aqsy In Apjlsw Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Ppsdpfxswuz S De Aqlew Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Pjdpfxjt Hmt Io Aqlepw Max. panel length: 1250 mm No of injectors: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008342, Max. panel width: 70 mm Max. panel length: 2100 mm No of injectors: 4 Ppsdox A Tc Uspfx Aqlew Lateral horizontal groups: yes

Condition: excellent (used), Year of construction: 2024, 2024 Star SP-23 CNC Sliding Head Lathe With Fanuc Series Oi-TF Plus Control With FMB Turbo RS 3-38 Barfeeder Number Of Axes 7, Main Spindle (Headstock) 'Z1/C1', Main Spindle Platen 'X1/Y1, Sub Spindle 'X2/Z2/C2' Axis. Maximum Machining Ø23mm. Headstock Stroke 205mm/50mm (NGB). Maximum Main Spindle Speed 10,000rpm (3.7kW Motor). Main Spindle Tooling: Turning Tool 8 Tools at 12mm SQ, Drilling Arm Sleeve Holder Capacity 5 x Ø22MM Sleeves (ER16), Power Driven Tool Positions 2 + 5 Modular Stations. Maximum Driven Tool Speed 8,000rpm. Sub Spindle Maximum Chucking at 23mm. Maximum Main Spindle Speed 10,000rpm (2.2kW Motor). Sub Spindle Tooling: Back-Working Platen Positions 4, Maximum Drill Sleeve Capacity ER20, Power Driven Tool Positions 4 (ER16), Maximum Driven Tool Speed 8,000rpm. Barfeeder Length 4,280mm. S/No. 668 (2024). Ppedpfx Aezn Nm Hjqljw With Coolant System, LNS Coolant System, Firetrace Fire Suppressor, Filtermist Mist Extraction Unit, Parts Conveyor, Signal Tower, Toolkit, Assorted Tooling (Collets, Connectors) . Weight 2,250kg.

Condition: excellent (used), Year of construction: 2016, operating hours: 11,000 h, Ref: 11132 . 2016 Muller Martini Ventura MC 160 Latest Model, Fully Automatic Book Sewer capable of 160 cycles p/min Excellent condition - Only 11,000 hours worked! Equipped with: Touch Screen Commander control ASIR III automatic signature control Servo drives 11 stitches / opening 2+2 Venturi jets Leaf chain for thin signatures Device for thread melting Belt delivery Features: Patented loop formation using blow air and an active thread cutting system Active thread divider system as standard - this is not part of the basic equipment of any other entry-level model in the market. It guarantees that threads are trimmed between the individual book blocks without tension. 1. The punch needles make the holes in the signature from below. 2. Sewing needles pull the thread through every other hole 3. Air blast blows the thread as a loop into the slotted lever 4. The hook needle grabs the loop. Then the hook needle and sewing needle pull the thread up simultaneously, creating the thread chain. Wide Range of Sizes: Designed for the most common size and fold types, it can process signatures ranging from; 120 to 425 mm in length and from 75 to 320 mm in width, and from four pages to 4 mm in thickness. User friendly: Job changes can be performed quickly and conveniently thanks to the display on the touch-screen with the proven job and setup wizard from Muller Martini. Uniform icons make it easier for machine operators to get an overview of the whole machine. With its quick job changeover times, the Ventura MC 160 is suitable for both short runs and industrial three-shift operations. Specification: Max signature length: 425mm Min signature length: 120mm Max signature width: 320mm Pjdpfxezpv Efe Aqljpw Min signature width: 75mm Max thickness: 4mm Max. speed: 9,600/hour

Condition: used, SPRB-SPRS Series 400 V three-phase power supply Frequency 50-60 Hz Current 24.8 A Total power 11.4 kW Dough capacity 250 kg Flour capacity 166 kg Bowl volume 390 L 2-speed spiral Spiral motor 6.5 / 11 kW Bowl motor 1.1 kW Automatic speed change Bowl rotation by pulses Bowl rotation direction reversal Hydraulic tilting Discharge into hopper or divider Stainless steel bowl Dimensions L × W × H 1800 × 1650 × 1750 mm Loading height 1040 mm Unloading height 1930 mm Maximum height in tilting position 3100 mm Weight 1650 kg Year 2022 Used self-tilting dough mixer 160, capable of handling 250 kg of flour, SPRS250 General description The MECNOSUD SPRS250 is a large-capacity, self-tilting spiral dough mixer designed for bakeries, pastry shops, and production units that need to prepare up to 250 kg of dough per cycle. Its fixed 390-liter bowl can hold up to 166 kg of flour. This SPRS version is equipped with a hydraulic tilting mechanism that allows the dough to be discharged at height directly into the hopper of a divider or other production equipment. A mixer designed for large-scale production The SPRS250 combines a two-speed spiral, an independently motorized bowl, and two electronic timers. The operator can thus program the two phases of kneading separately, with an automatic transition from the first to the second speed. This arrangement facilitates the repeatability of recipes and limits interventions during the cycle. Key advantages Maximum dough capacity of 250 kg Up to 166 kg of flour Fixed 390-liter stainless steel bowl Two spiral speeds Two independent electronic timers Automatic transition between the two speeds Two independent motors for the bowl and the spiral Bowl rotation direction reversal Bowl rotation by pulses Hydraulic tilting, reducing manual handling Direct discharge into a hopper or divider Robust construction suitable for sustained production Detailed technical specifications Brand MECNOSUD Manufacturer's model SPRS250 Type of mixer Automatic spiral mixer with fixed bowl Discharge system Hydraulic tilting at height Maximum dough capacity 250 kg Maximum flour capacity 166 kg Bowl volume 390 L Spiral speeds 2 speeds Spiral motor power 6.5 / 11 kW Bowl motor power 1.1 kW according to the manufacturer Motorization Two independent motors Cycle management Two electronic timers Bowl rotation Continuous, by pulses and reversible Transmission V-belts Bowl High-strength stainless steel Spiral High-strength stainless steel Central column Stainless steel Protective grill Stainless steel Unladen weight Approximately 1,650 kg Dimensions at rest Approximately 1800 x 1650 x 1750 mm Loading height 1040 mm Pjdjzqd Iqjpfx Aqlopw Unloading height 1930 mm Maximum height in tilting position 3100 mm Tilting footprint Approximately 2100 mm Data announced for this used unit Year 2022 Power supply 400 V three-phase Frequency 50-60 Hz Current 24.8 A Total power 11.4 kW Bowl capacity 84 L Discharge direction To the right Type of controls Electromechanical