Used Brockhaus Spannweite 210 Mm for sale (76,491)

Condition: used, Machine vise, sturdy vise, drill vise -Handover: in the current condition as viewed Nsdpfehhf Aiox Agrodb -Stop jaw: repair welding, support surface milled -Machine vice: clamping jaws 140 x 60 mm -Clamping depth: 210 mm -Dimensions: 500/230 / H110 mm -Weight: 21.7 kg

Condition: used, Machine vise, sturdy vise, drill vise -Vise: rotatable Nedpfx Agsb A Nrxsredb -Jaw width: 140 mm -Clamping depth: max. 210 mm -Dimensions: 70/290/H150 mm -Weight: 32 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice Ndjdpfx Asb A Nunogrob -Jaw width: 170 mm -Clamping depth: max. 240 mm -Dimensions: 650/350/H130 mm -Weight: 40 kg

Condition: good (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch Ndjdoyffm Espfx Agrjb -Manufacturer: VDO, contact pressure gauge 0 - 400 bar -Voltage: up to 380 V -Switching capacity: 30W 50VA -Quantity: 1x pressure gauge available -Dimensions: 220/210/H140 mm -Weight: 1.8 kg

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 5,050 mm, construction height: 2,900 mm, operating hours: 3,183 h, fuel type: electric, mast type: duplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + S - 2W5050 ID: 25053.2983 Category: Used Mast: 2W Lowered height: 2,900 mm Lifting height: 5,050 mm Capacity: 1,000 kg Platform height: 4,250 mm Picking height: 5,850 mm Initial lift: Yes Cabin width: 1,000 mm Year: 2015 Hours: 3,183 h Battery capacity: 48 V / 465 Ah Options: - Side guidance / Rail guidance Nodjzq Udvjpfx Agrodb

Condition: good (used), Compressor control, compressor control, control panel, control box, control unit -Manufacturer: WA Wille Automationstechnik, control box control unit -Type: unfortunately no type designation Nedpfxsg Td D Ho Agrjdb -Dimensions: 305/210/H110 mm -Weight: 4.2 kg

Condition: used, plate width 3200 mm plate depth 2000 mm plate height 210 mm Nsdpfx Agjud Ipqjrjdb weight of the machine ca. / t Clamping plate Dimensions: 3200 x 2000 x 210 mm T-slot dimensions: ? x ? x ? (H)

Condition: good (used), Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 2005 mm -Length: 2000 mm Nsdjcfyghepfx Agredb -Height: 210 mm -Plate thickness: 120 mm -Plate: with support ribs -Groove width: 28 mm -Dimensions: 2000/2005/H210 mm -Weight: 2700 kg

Condition: used, Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Round table. with three-jaw chuck -Chuck size: Ø 210 mm -Spindle bore: Ø 64 mm Ndsdpfxjitt R Do Agrjb -Center height: 150 mm -Dimension: 310/250/H260 mm -Weight: 47 kg

Condition: ready for operation (used), Year of construction: 1971, Center lathe, manufactured by VOEST ALPINE, type DA 210, year of manufacture 1971. Chuck: 315 mm, tool holder: Multifix B with 2 tool pockets. Ndjdpfxsz Eilno Agreb Center height: 210 mm Distance between centers: 1000 mm Spindle bore: 46 mm Spindle speeds: 28 - 2000 rpm Further details can be found in the data sheet. Machine in good, ready-to-use condition. Machine documentation available. Weight: approx. 1200 kg

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Springback: 22.0 mm Nsdpsx Dtt Aofx Agrodb CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Hardened rollers Conical bending unit by inclining the two side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Weight: approx. 14.5 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator Nsdeivqmlspfx Agrodb -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg

Condition: good (used), Approx. 1,000 – 1,500 units, transparent storage boxes, L: 350mm, W: 210mm, H: 200mm - used: Price per unit, ex warehouse: €3.50 (net), plus €5.00 / wooden pallet! Price for complete purchase: €3.00 (net) / unit, plus €5.00 / wooden pallet! Minimum purchase quantity: 198 units (2 pallets) Manufacturer: Mixed, predominantly Promat MK3 (now Tecwerk) Type: Transparent storage boxes Year of manufacture: unknown Color: Blue and yellow, significantly more blue External dimensions: approx. L: 350mm, W: 210mm, H: 200mm Internal dimensions: approx. L: 280-300mm, W: 190mm, H: 190mm Weight per container: approx. 650g Load capacity: 20kg Packing dimensions: 1200 x 800 x 2000mm Condition: Dry, slightly dusty, scratches, some with QR codes, remnants of labels present Available: immediately Location: 78234 Engen Nodjzxcnxepfx Agrjdb

Condition: excellent (used), Control cabinet Manufacturer: ETA Type: EMOX Dimensions: 120x40x210 cm Njdpfx Agjyu R Hpjredb Contents – main components: 1 piece PLC: Siemens Simatic S7 1500 1 piece Comfort Panel: Siemens TP1200 Comfort 3 pieces frequency inverters: Siemens Sinamics V20 14 pieces power supply units: Siemens Sitop PSU100L We have several control cabinets in stock, with various configurations or also empty.

Condition: excellent (used), Year of construction: 2013, operating hours: 30,533 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, plate length: 630 mm, plate height: 580 mm, total length: 4,000 mm, total width: 1,500 mm, total height: 2,200 mm, overall weight: 4,100 kg, Equipment: documentation/manual, BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: Wittmann Battenfeld Type: HM 90-210 Control System: UNILOG B6 Year of Manufacture: 2013 Operating Hours: 30533 h Technical Data - Clamping Unit Clamping Force: 900 kN Tie Bar Distance h x v: 420 x 370 mm Platen Size h x v: 580 x 630 mm Minimum Mold Height: 450 mm Maximum Mold Height: 925 mm Opening Stroke: 475 mm Ejector Stroke: 150 mm Ejector Force: 41 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Mold Weight: 800 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 106 ccm Injection Pressure: 2042 bar Screw Length: 22 l/d Screw Stroke: 150 mm Screw Speed: 372 rpm Screw Torque: 490 N Free Injection Rate: 103 g/s PS Number of Heating Zones: 4 Nozzle Distance: 250 mm Njdpfxoz A A Hys Agrodb Dimensions & Weight Machine Dimensions L x W x H: 4m x 1.5m x 2.2m Total Weight: 4100KG Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull, 2x Air valve, 1x Leveling elements Plasticizing unit, highly wear-resistant and corrosion-resistant Screw drive with three-phase servomotor Ethernet interface EUROMAP 13 interface EUROMAP 67 Handling interface Interface for color dosing unit Interface for temperature control unit Schuko socket 10A Mold heating, 8x

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, total length: 6,100 mm, gear diameter: 180 mm, total height: 3,500 mm, total width: 3,000 mm, input frequency: 50 Hz, milling length: 170 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 300 rpm, travel distance X-axis: 100 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 300 mm, overall weight: 8,400 kg, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, A high-performance machine for series production: the horizontal Gleason-Pfauter P 210 L, built in 2003, mills shafts, pinion shafts, and small gears up to module 4 and 180 mm in diameter at speeds of up to 4,000 rpm on the cutter and 1,000 rpm on the workpiece – designed for short cycle times and dry machining. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control systems with full spare parts and support availability. Modern Gleason-Pfauter kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, and we will inspect it together with you in Chemnitz. Nedpfxez Et Rze Agredb The horizontal design makes the P 210 L ideal for shaft machining: workpieces up to 830 mm are clamped between the spindle and tailstock, with 300 mm of axial travel and 100 mm of radial travel (center distance 30–130 mm). The milling head pivots by ±40°, and the tangential travel of 160 mm utilizes the full cutter length of 170 mm for long tool life. The high workpiece speed allows for multi-tooth hobbing cutters and thus the cutting performance required in the gearbox and automotive component supply sector. The machine is prepared for connection to a loading portal or a robot. Technical data: max. workpiece diameter 180 mm, max. module 4, working area radial 100 mm (30–130 mm), axial 300 mm (260–560 mm), tailstock 350 mm (480–830 mm), max. cutter diameter 180 mm, max. cutter length 170 mm, tangential travel 160 mm, cutter speed 300–4,000 rpm, max. workpiece speed 1,000 rpm, swivel angle ±40°, total connection value 50 kVA. Installation dimensions approx. 6.1 × 3.0 × 3.5 m, weight approx. 8.4 t. The machine will be delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in an air-conditioned control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometry acceptance is carried out according to the manufacturer's standard or DIN with a protocol. The scope of delivery also includes the complete machine enclosure with state-of-the-art safety technology, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: good (used), Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, clamping claws, pull-down clamp, pull-down jaw, side clamp -Manufacturer: Lenzkes, clamping claw clamping jaw Ndjdpfxju N Sgmj Agreb -Type: Backe 3 JSG -Clamping jaw: 100 x 50 mm -Clamping height: max. 210 mm -Groove width: 32 mm -Dimensions: 255/100/H120 mm -Weight: 10.7 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 13,000 h, clamping force: 2,100 kN, screw diameter: 50 mm, Hydraulic injection moulding machine manufactured in 2009. This SUMITOMO SHI DEMAG Systec 210/580-1450 features a clamping force of 210 t and a screw diameter of 50 mm. It offers a maximum specific injection pressure of 2426 bar and a maximum swept volume of 530 cm³. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 210/580-1450 machine we have for sale. Contact us for further details. - Max. Specific Injection Pressure: 2426 bar- Max. Swept Volume: 530 cm³- Mold Height (Min/Max): 340 mm / 790 mm- Tie-Bar Distance: 580 x 580 mm- Centering Ring Diameter (Ejector/Nozzle): 160 mm / 160 mm- Operating Hours: 13,000 hrs (Drives)- Core Pull: 1 circuit- Pump Drive Power: 30.0 kW- Power Supply: 400 V ±10% / 50 Hz, 3 Ph+N+PE- Feed Zone Cooling: Regulated temperature- Hydraulic Screw Drive: Motor I (high speed)- Nozzle Specifications: Open nozzle M24x1.5, Radius 38.0 mm, Bore 3.0 mm- Water Connection: 8-fold cooling water flow regulator with temperature display (max 10 l/min per circuit), separate connections for mold and machine cooling- Socket Combination: Integrated, 2 x Schuko 1Ph/230V/10A, 2 x IECEE 3Ph/400V/16A Njdpfx Aoz Er Dtegredb

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Nedpfx Aezt H U Segrjdb Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Machine no. No. 1116 145 220 Year of construction 1994 Sawing range at 90° round 210 mm flat 240 x 190 mm square 210 x 210 mm at 45° round 150 mm Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Material support height 500 mm Motor power 0.5 / 0.75 kW Mains connection 400 Volt, 50 Hz - Drive motor with 2 speeds - Coolant pump in the machine base frame Ndjdpfjuqgbtjx Agrsb Space requirement L x W x H 1200 x 500 x 1200 mm Weight 170 kg Good condition

Condition: good (used), Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 15 BL 245 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm Nedpforwqbrox Agrsdb -Weight: 6.8 kg

Condition: used, rubber damper, engine damper, clutch, rubber coupling -Rubber coupling: rubber damper engine damper -Dimensions: see photos Nodpfx Aouzn Evegrjdb -Total dimensions: 240/210/H130 mm -Weight: 4.5 kg

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2400 x 2100 mm -Table height: 750 mm -Plate thickness: 130 mm Ndsdpfx Aoxpfl Iegrob -Transport dimensions: 2400/2100/H750 mm -Weight: 4900 kg

Condition: used, Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm Njdpfxerw Dato Agredb -Weight: 9.4 kg

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 1,126 kg, load capacity: 210 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA smartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 210 R2700-2 with KR C4 – NEW / 0 operating hours We offer a new and unused KUKA KR 210 R2700-2 industrial robot with KUKA KR C4 controller. Manufactured in 10/2021 with 0 operating hours. Nedpfxezyambe Agrodb Robot specifications Model: KUKA KR 210 R2700-2 Payload: 210 kg Reach: 2701 mm Year of manufacture: 10/2021 Operating hours: 0 h / NEW Weight: 1126 kg Colour: RAL 7016 Cable set: INT 084ST2700 Controller KUKA KR C4 EU KSS 8.6 Servo configuration SC4 400 V transformerless power supply Siemens SCALANCE X208 Interface X42 Ethernet interfaces X67.1–X67.3 24 V power interface X55 27 V power / USB interfaces X51 / X56 CSP 2x USB 3.0 Cabinet base with spacer Set of 75 mm rollers Installed KUKA software & technology packages KUKA.SafeOperation 3.5 KUKA.UserTech 4.0 KUKA.LoadDataDetermination 7.1 KUKA.GripperSpotTech 5.0 KUKA.RobotSensorInterface 4.1 KUKA.DeviceConnector KUKA.WorkVisual 6.0 KUKA.ActivationManagementTool The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.