Used Bruker Tensor 27 for sale (4,652)

Condition: used, Bruker Type: Tensor 27 IR Spectrometer Maximum sample flexibility. Thanks to the improved QuickLock™ mechanism and the locking button on the front, even bulky accessories can be quickly and, above all, safely installed. In addition, the INVENIO can be equipped with three software-controlled beam outputs for a wide range of external modules. FPA micro and macro imaging Variable external sample chamber (left and right) for individual experiments Fiber optic coupling to fiber probes for liquids and solids Integrating sphere Autosampler for liquids High-throughput analysis module HTS-XT Reflection unit for the air-water interface And much more! Condition: used Scope of delivery: (See image) Ledpjzh D Nvefx Amzeah (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Year of construction: 2022, condition: used, controller manufacturer: Sonstige, controller model: Bruker alicona MetMaX, _____ Description: Year of manuf. : 2022 Laedpfx Ae Aau Tysmzoh Control : Sonstige Bruker alicona MetMaX Movement X/Y/Z : mm In General: Measurement method:Non-contact, optical, three-dimensional Maximum number of measurement points:500 million Measurement volume:310 x 310 x 310 mm Travel speed:100 mm/s Dimensions:960 x 1,109 x 1,958 (2,288) mm Weight:approx. 1,250 kg Measuring object Surface texture:Any surface (including polished metals) Max. weight:30 kg Max. dimensions (W x H):680 x 375 mm Equipment: Rotary table:A-axis, C-axis Lens changer:Automatic (4-position) Number of lenses:4 (WD 11, 17, 19, 30) Polarisation:Ringlight HP Vc1 System monitoring:9 temperature sensors ControlServerSF:64-bit, 6-core, 32 GB RAM, 500 GB SSD, Windows 10 Set-up mode:Handheld control unit

Condition: used, This listing is for the This listing is for the Bruker microflex mass spectrometer The unit is in full working condition and is ready for immediate use The Bruker Microflex is a Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometer (MALDI-TOF MS), primarily used for rapid identification of microorganisms, biomolecules (like proteins and peptides), and polymers. It is part of Bruker’s MALDI Biotyper series Lsdpfx Ajxhdxqjmzeah Key Components: Laser Source: Nitrogen or solid-state laser (commonly 337 nm UV) Ion Source: Vacuum chamber with MALDI target plate Flight Tube: Measures time-of-flight of ions Detector: Converts ion arrival times into a mass spectrum MALDI Target Plate: Metal plate for spotting samples mixed with matrix How It Works (Simplified): Sample Prep: Mix analyte with a MALDI matrix (e.g., α-cyano-4-hydroxycinnamic acid). Laser Ionization: Laser hits the matrix, causing it to ionize the sample. Ion Acceleration: Ions accelerated into TOF analyzer. Detection: Time-of-flight is measured; smaller ions reach the detector faster. Spectrum: Mass/charge ratio (m/z) plotted vs intensity. Physical Specs (Approximate): Footprint: Desktop size (about 80 cm width) Weight: ~100–120 kg (varies by model/version) Power: Standard lab electrical supply Environment: Requires clean, stable temp/humidity condition

Year of construction: 2003, condition: used, machine/vehicle number: TUNNEL 40/27, Manufacturer: SFERE EMBALLAGE S.A. Year of manufacture: 2003 Electrical current: 10 A CE marking on manufacturer's plate Heat shrink wrapping Integrated through-feed conveyor Heating chamber with top cover Front control panel Integrated digital display Rotary adjustment control Control buttons on the front Emergency stop on the front panel Lateral switch-disconnector Mobile metal frame on casters Adjustable stabilizing feet Electrical hazard warning Used SFERE EMBALLAGE TUNNEL 40/27 heat shrink tunnel – Through-feed conveyor and digital control General description The used SFERE EMBALLAGE TUNNEL 40/27 heat shrink tunnel is a professional piece of equipment designed for heat shrink wrapping operations. Manufactured in 2003 by SFERE EMBALLAGE S.A., a French manufacturer, it allows products that have been previously wrapped in suitable film to undergo a heating phase as they pass through the tunnel. Designed to be integrated into a professional packaging environment, this heat shrink tunnel features a through-feed conveyor, a front control panel, and a mobile frame. Its manufacturer's identification and visible equipment allow for a clear understanding of its configuration without presuming its current performance. Ledpfxsz Urq Hj Amzoah Why this model stands out The SFERE TUNNEL 40/27 combines product conveyance with a heat shrink operation. This configuration facilitates the organization of a packaging station where items, already wrapped in film, pass through the heating zone before subsequent handling or shipping steps. Its control panel with a digital display allows for the monitoring of an operating parameter. A rotary control and several control elements are also visible on the front. The frame mounted on casters, complemented by stabilizing feet, is a practical asset for positioning the machine in a workshop. Key advantages Through-feed conveyor to accompany the passage of products through the tunnel Heat shrink principle suitable for heat shrink wrapping operations Digital display integrated into the front control panel Rotary control accessible to the operator Emergency stop present on the control panel Lateral switch-disconnector visible on the machine Frame on casters facilitating movement Stabilizing feet to immobilize the equipment at the workstation Manufacturer's plate for identifying the model and its year of manufacture

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Turnover / straight-through module Transfer conveyor Shingled delivery conveyor Lasdpez Iz Sfsfx Amzoh 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Integrated vacuum system Interlocked safety guarding Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Secondary rotary pick & place feeder Secondary product size: 54 x 54 mm to 150 x 150 mm Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Air requirement: 4.1–7 bar

Condition: excellent (used), Bruker Ultraflex TOF/TOF UT0100 G002 11 020 44 02 Lodpfx Aorit Injmzeah Mass spectrometer

Condition: used, machine/vehicle number: CT1133L70678, Year of construction: 2021, operating hours: 6,200 h, No minimum price – guaranteed sale to the highest bidder! Laodpfs Ad Rdisx Amzjh TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm MACHINE DETAILS Battery year of manufacture: 08/2021 Battery voltage: 24 V Battery capacity: 375 Ah Battery voltage at rest: 25.3 V Dimensions & Weight Dimensions (L x W x H): 2,500 x 800 x 2,200 mm Weight: 1,500 kg Service valid until: 03/2027 UVV (occupational safety) valid until: 03/2027 Operating hours: 6,200 h EQUIPMENT Initial lift Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 337

Condition: used, Year of construction: 2006, * Work area: 2,650 x 1,240 mm * X-Y travel: 2,995 x 1,385 mm * Z-axis travel: 200 mm * Clearance height: 180 mm C-axis deactivated - 3-axis machine The structure of the base body is a monolithic construction made of thick-walled steel. It is reinforced throughout the machine bed by welded triangular plates, making it extremely stable. The triangular shape used for the supporting parts, with a large base, is the key to long-lasting precision and stability. The machine's layout allows the user an optimal workflow despite minimal space requirements. The base body, constructed in this way, provides the machining unit with a balanced and secure base with particularly good load distribution. The mobile unit carrier is made from a solid monoblock. It is positioned in the X-direction on prismatically ground guides via ball screw slides. The machining unit is, in turn, attached to the mobile unit carrier on prismatic, ground guides and the ball screw slide. Description of units and accessories (base) Drilling unit: Drilling head with 12 + 6 spindles * 7 individually selectable vertical spindles in X * 5 individually selectable vertical spindles in Y * 4 horizontal spindles in X (2+2) * 2 horizontal spindles in Y (1+1) * Speed: 4,000 1/min * Power: 2.2 kW * Grid: 32 mm * Drill chuck: M 10 with Morse taper No. 11 Nut saw unit in "X": * Integrated in the drilling head * Nut saw blade with a diameter of up to max. 120 mm Main milling unit (Position 2): * Tool holder HSK 63F * Speed 1,500 - 24,000 1/min, stepless via inverter * Motor power 4.4 kW (6 hp) from 12,000 1/min (S1) * Motor power 6.6 kW (9 hp) from 12,000 1/min (S6) * Right/left rotation * Ceramic bearings * Scope of supply: 4 pcs. tool holder (right) without collet Tool changer R8L Automatic tool changing device for 8 tools. Mounted on the rear unit carrier for quick access to the tools. Lasdpfx Aex Twccjmzjh * Number of tool positions: 8 * Max. tool diameter: 120 mm * Max. weight per tool: 4.5 kg * Max. total weight of all tools: 22 kg * Holder for 1 angular gear * Mounted and moving in X Horizontal milling unit (Position 1) Horizontal unit with two opposite outlets for milling and grooving. * Speed 9,000 - 18,000 1/min, stepless via inverter * 1 outlet for collet 3-20 mm (ER 32) * 1 outlet for saw/collet 3-12 mm (ER20) (For saw D=120 mm / bore 50 mm) * Motor power 3 kW (4 hp) * Max. tool diameter, front milling: 20 mm * Max. tool length, front milling: 110 mm * Max. tool diameter, rear milling: 12 mm * Max. tool length, rear milling: 80 mm * Max. saw blade diameter: 100 mm * Bore in saw blade (ER 32): 50 mm * Arbor diameter, saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum "freedom of movement". The vacuum quick-clamping system offers maximum flexibility with precise positioning and optimal workpiece clamping. * 6 supports 1000 mm, stepless pneumatically adjustable in X * 12 vacuum suction cups, round D = 110 mm, steplessly adjustable in Y (2 pcs. per support) * 2 stops in X (1 x left / 1 x right) * 1 stop in Y per support (total 6 pcs.) * The retractable reference stops are CNC-controlled * Pendulum machining standard (2 working areas) --- other clamping systems are available as optional extras --- Axis movement The drive system in X, Y and Z is via ground ball screws.

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork carriage adjustment range: 350–1,050 mm Fork length: 1,200 mm MACHINE DETAILS Ljdsz S Nq Sspfx Amzjah Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT 3rd and 4th valve Formerly a Linde full-service machine Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157

Condition: good (used), Year of construction: 1993, operating hours: 2,466 h, Brand: Leistritz AG Model: Micro 27/40 D Screw type: Twin screw Lhjbn Sm Hszu Nk Soqvjl Year of manufacture: 1993 Screw diameter: 27 mm Ljdpfx Asz Egzyjmzjah L/D ratio: 40 Operating hours: 2,466

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: AA1/016854, functionality: fully functional, 3-AXIS DRILLING & MILLING CENTER Make: SCM Model: TECH Z2 Comp R0410.01 Serial No.: AA1/016854 Year: 2012 (Photos taken before overhaul, functional testing, and cleaning) MAKING CAPACITIES: - Max. workpiece height (thickness): 160 mm - Max. workpiece length: 2700 mm Dual station: 1210 mm - Max. workpiece width: 1300 mm Movements: - X-axis travel: 3060, Y-axis: 1735, Z-axis: 250 mm - Max. travel speed (vector: 60 m/min) MACHINE COMPOSITION: - 6 Pneumatically clamped beams for suction cups, e.g., 120x120 or 55x120 mm - Unit Automatic lubrication - Mounted unit on the neck of the sign composed as follows: (X movements by rack and pinion, Y movements by screws and bushings; high-quality precision linear guides with automatic lubrication) • 11 kW (15 HP) milling/routing unit: - Rotation 1500 - 24000 rpm, variable speed, right/left direction - Tool holder connection type HSK63F, ER32 collet - Onboard magazine for 8 tools - Perimeter extraction hood • 18-chuck drilling unit: - 12 independent vertical chucks (8 in the X direction, 5 in the Y direction) - 6 horizontal chucks (4 in the X direction, 2 in the Y direction) - Center distance between chucks 32 mm for M10 / Ø11 mm drill bits - Rotation speed 4000 rpm - Pneumatic vertical stroke 60mm - Perimeter extraction hood • Integrated unit for groove sawing and milling - Ø120mm blade, 6mm thick - 6000 rpm speed - 60mm pneumatic vertical stroke • Mobile console on a jib with a control PC: – Windows XP operating system – 17" LCD screen – Ethernet connection – Xilog and Maestro machine interface software OTHER FEATURES: - 400V overall power supply. Three-phase + N+T 50Hz IN37A - 12 kW electro-spindle motor - 2.2 kW drilling/grooving motor - 1 x 2.4 kW vacuum pump: 90-108 m3/h - Pneumatic supply >=7 Bar - Suction: Suction inlets: 2 x Ø 150 mm (1 x Ø 200 mm inlet using the installed bypass) Recommended speed: 30 m/s - 3400 m3/h - CE-compliant machine with safety zone and light barrier Operating dimensions with safety zone: see documentation excerpts Shipping dimensions: to be specified when preparing the equipment Estimated total weight: 2200 kg Machine supplied with instruction manual and software, spare parts list, electrical and pneumatic diagrams. Please contact us for the supply of consumables, accessories, and/or vacuum systems. Machine serviced and brought into compliance, with quality control and dynamic functional testing. Ledpfx Ajv Tzrvomzoah 3-month warranty and compliance certificate. Available from stock, subject to prior sale. Prices excluding VAT. Delivery and additional services upon request.

Condition: used, machine/vehicle number: 91671500, Year of construction: 2023, operating hours: 1,435 h, load capacity: 7,000 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Towing capacity: 7,000 kg Laedoz S Ntgopfx Amzsh MACHINE DETAILS Battery voltage: 48 V Battery capacity: 260 Ah Battery type: Lithium-ion battery Tires: White, non-marking tires Lighting: StVZO-compliant lighting with turn signals for road approval Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 1,400 mm Weight: 1,500 kg Service valid until: 07/2027 UVV inspection valid until: 07/2027 Operating hours: 1,435 h EQUIPMENT Battery charger Formerly a Jungheinrich full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 357

Condition: used, mileage: 478,000 km, power: 147 kW (199.86 HP), first registration: 03/2013, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, color: silver, gearing type: automatic, emission class: euro6, total length: 10,960 mm, total width: 2,600 mm, Year of construction: 2013, Equipment: ABS, air conditioning, soot filter, tail-lift, Information in English: MB ANTOS 1827 EURO 6, 15-car transporter, loading area 278 cm high, 2x heater, 2,000 kg liftgate, in top condition Body: Fully insulated cargo box, manufactured by Zwartjes Date of first registration: TÜV (German technical inspection) valid until: 05/2027 Mileage: 475,000 km Engine power: 200 kW (272 hp) Transmission: Automatic Internal dimensions (L x W x H): 880 x 250 x 278 cm External dimensions (L x W x H): 1096 x 260 x 400 cm Wheelbase: 610 cm Unladen weight: 12,315 kg Payload: 6,585 kg Lsdpfx Amj Ab D Suozeah Permissible total weight: 19,000 kg Color: Silver metallic Suspension: Parabolic spring front, air suspension rear Emission class: EURO 6 Axle configuration: 4x2 Tires, axle 1: 315/70 R22.5 L80% R80% Tires, axle 2: 315/70 R22.5 L90% R90% Rims: Alcoa DuraBrights Cab type: Day cab Additional equipment: Air conditioning, Orlaco front and rear cameras, roof spoiler and mudguards, 500-liter aluminum diesel tank, automatic transmission, fully insulated Zwartjes body with insulated floor and roof, 4 floor/ceiling rails (all 4 with Omega profile), 1 car carrier trough, 1 horizontal rail in the side wall, 2 Eberspächer hot air heaters (hot air supply at the front and rear of the body (1 heater per side for optimal heating performance)), 2,000 kg Dhollandia liftgate, LED lighting in the ceiling with timer, various additional lights, Alcoa DuraBright aluminum rims, complete maintenance history at Mercedes-Benz, suitable for 15 auction cars or 27 Danish cars, the truck comes directly from the first owner and was driven by only one driver. Extremely well-maintained box van with a very nice body and good dimensions. IMMEDIATELY AVAILABLE AND READY FOR USE Further information: * Payload: 6585 kg * Tire size | First axle: 315/70 R22.5 * Tire tread depth inside left | First axle: 80% * Tire tread depth inside right | First axle: 80% * Maximum axle load | First axle: 8000 kg * Tire size | Second axle: 315/70 R22.5 * Tire tread depth outside left | Second axle: 90% * Tire tread depth inside left | Second axle: 90% * Tire tread depth outside right | Second axle: 90% * Tire tread depth inside right | Second axle: 90% * Maximum axle load | Second axle: 11500 kg * Wheelbase: 610 cm * Liftgate | Manufacturer: DHOLLANDIA * Liftgate | Load capacity: 2000 kg * Position | First axle: Front * Brake type | First axle: Disc brakes * Suspension | First axle: Parabolic springs * Alloy wheels | First axle: Yes * Position | Second axle: Rear * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Reduction | Second axle: Single reduction * Twin tires | Second axle: Yes * Driven | Second axle: Yes * Differential lock | Second axle: Yes * Alloy wheels | Second axle: Yes * Liftgate | Type: Closing tailgate Further equipment: * Alcoa rims * Aluminum fuel tank * Anti-lock braking system (ABS) * Anti-slip control * Automatic transmission * Automatic air conditioning * Heated mirrors * Brake booster * Differential lock * Electric windows * Electrically adjustable exterior mirrors * Electronic Braking System (EBS) * High beam * Cruise control * Homepage * Air conditioning * Alloy wheels * Air suspension * Air horns * Metallic paint * Fog lights * Parabolic suspension * Particle filter * Spare wheel * Reversing camera * Disc brakes * SemCollection * SemStars * Spoiler * Toolbox

Condition: used, mileage: 135,000 km, power: 175 kW (237.93 HP), first registration: 11/2008, fuel type: diesel, overall weight: 13,500 kg, next inspection (TÜV): 04/2027, emission class: euro5, loading space length: 7,300 mm, loading space width: 2,450 mm, loading space height: 2,300 mm, Equipment: ABS, parking heater, tail-lift, Atego 1324 Registration date: 11/2008 !!!! ONLY 135,000 km !!! Euro 5 MOT valid until 04/27 Auxiliary heater Automatic transmission Suspension: Air-on-air Payload 5200 kg Bär tail lift Loading dimensions: 7.3 m height, 2.3 m width, 2.45 m Unit: Thermoking TS 600 !!!! UNIT HAS ONLY 400 DIESEL RUNNING HOURS !!!!! Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian… Goran German/English/…? … Roman We will gladly take care of your financing or leasing. Lsdjz Am Tyopfx Amzoah EU sale: net price upon presentation of company documents and VAT number. VAT deposit: €2000 Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: used, machine/vehicle number: FN535356, Year of construction: 2017, operating hours: 3,483 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 3,600 mm Fork length: 1,800 mm MACHINE DETAILS Mast type: Duplex mast Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 5,700 x 1,300 x 2,420 mm Own weight: 4,896 kg UVV certification valid until: 05/2027 Next service due in: 516 hours Starter battery: new in 05/2027 Operating hours: 3,483 hours EQUIPMENT Former Jungheinrich full-service unit Side shifter Free-lift mast without center hydraulic cylinder 3rd valve Full cabin Heater Windshield wiper Laodez S Nrijpfx Amzoh LED work light (front) LED work light (rear) Comfort seat LPG cylinder exchange system All dimensions are rounded values. No warranty is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 172

Condition: repair required (used), Year of construction: 1991, Year of manufacture: 1991 Roll-off container system 20 m³ Year: 1991 400 V, 32 A, CEE plug Ledpfx Amj Aax I Iszjah 4 kW 4700 kg Requires repair: The locking mechanism needs to be made functional.

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 2,500 mm Fork length: 1,150 mm Laedpoz S Nwfofx Amzoh MACHINE DETAILS Battery voltage: 24 V Battery capacity: 150 Ah Battery type: 2 PzB Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 788 h EQUIPMENT Formerly a Jungheinrich full-service unit All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 446

Condition: used, mileage: 478,000 km, power: 147 kW (199.86 HP), first registration: 03/2013, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2027, color: silver, gearing type: automatic, emission class: euro6, total length: 10,960 mm, total width: 2,600 mm, Year of construction: 2013, Equipment: ABS, air conditioning, soot filter, tail-lift, Information in English: MB ANTOS 1827 EURO 6 15-unit trailer, loading area 278 cm high, 2x heaters, 2,000 kg tail lift, top condition. Body: Fully insulated cargo box, manufactured by Zwartjes Date of first registration: TÜV (technical inspection) valid until: 05/2027 Mileage: 475,000 km Engine power: 200 kW (272 hp) Transmission: Automatic Internal dimensions (L x W x H): 880 x 250 x 278 cm External dimensions (L x W x H): 1096 x 260 x 400 cm Wheelbase: 610 cm Unladen weight: 12,315 kg Payload: 6,585 kg Permissible total weight: 19,000 kg Color: Silver metallic Suspension: Parabolic suspension front, air suspension rear Emissions class: EURO 6 Axle configuration: 4x2 Tires, axle 1: 315/70 R22.5 L80% R80% Tires, axle 2: 315/70 R22.5 L90% R90% Rims: Alcoa DuraBrights Cab type: Day cab Additional equipment: Air conditioning, Orlaco front and rear cameras, roof spoiler and mudguards, 500-liter aluminum diesel tank, automatic transmission, fully insulated Zwartjes body with insulated floor and roof, 4 floor/roof rails (all 4 with Omega profile), 1 flower cart trough, 1 horizontal rail in the side wall, 2 Ebersprächer hot air heaters (hot air supply front and rear in the body (1 heater per side for optimal heating performance)), 2,000 kg Dhollandia tail lift, LED lighting in the ceiling with timer, various additional lights, Alcoa DuraBright aluminum rims, complete maintenance history at Mercedes-Benz, suitable for 15 auction vehicles or 27 Danish vehicles, the truck comes directly from the first owner and was driven by only one driver. Extremely well-maintained box truck with a very nice body and good dimensions. IMMEDIATELY AVAILABLE AND READY FOR USE More information: * Payload: 6585 kg * Tire size | Front axle: 315/70 R22.5 * Tire tread depth inside left | Front axle: 80% * Tire tread depth inside right | Front axle: 80% * Maximum axle load | Front axle: 8000 kg * Tire size | Rear axle: 315/70 R22.5 * Tire tread depth outside left | Rear axle: 90% * Tire tread depth inside left | Rear axle: 90% * Tire tread depth outside right | Rear axle: 90% * Tire tread depth inside right | Rear axle: 90% * Maximum axle load | Rear axle: 11500 kg * Wheelbase: 610 cm Ledpfx Aj Ab D S Ismzjah * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 2000 kg * Position | Front axle: Front * Brake type | Front axle: Disc brakes * Suspension | Front axle: Parabolic springs * Aluminum rims | Front axle: Yes * Position | Rear axle: Rear * Brake type | Rear axle: Disc brakes * Suspension | Rear axle: Air suspension * Reduction | Rear axle: Single reduction * Twin tires | Rear axle: Yes * Driven | Rear axle: Yes * Differential lock | Rear axle: Yes * Aluminum rims | Rear axle: Yes * Tail lift | Type: Closing tailgate More features: * Alcoa rims * Aluminum fuel tank * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Automatic transmission * Automatic climate control * Heated mirrors * Brake booster * Differential lock * Electric windows * Electrically adjustable exterior mirrors * Electronic braking system (EBS) * High beam * Speed limiter * Homepage * Air conditioning * Aluminum rims * Air suspension * Air horns * Metallic paint * Fog lights * Parabolic suspension * Particle filter * Spare wheel * Rear view camera * Disc brakes * SemCollection * SemStars * Spoiler * Toolbox

Condition: used, Technical specifications: Number of spindles: 27 Distance between the first and last drill: 832 mm Distance between the centers of individual spindles: 32 mm Drilling depth adjustment: 0-80 mm Number of pneumatic clamping devices: 3 Operating pressure: 6 – 8 bar Drills mounted with quick-release fittings Pneumatic spindle rotation Motor power: 1.8 kW Laodozvmvhspfx Amzjh Manufacturer: Vitap Overall dimensions Length: 1260 mm Width: 930 mm Height: 1330 mm

Condition: used, Compact dust collector, dust extraction system HURRICAN Type Tonga BG32 / ST / 27-3000 Filter system, extraction system, central extraction system, cartridge impulse filter, dust extraction Cartridge filter system, rectangular filter system, central welding fume extraction Ideal for plastics, metals, wood, etc. Manufacturer: DAMBAUER GmbH Air and Environmental Technology Brand: HURRICAN Model: Tonga Machine No. 50313000 62185 Year of manufacture: 2014 Nominal volumetric flow rate 3000 m³/h Nominal volumetric flow rate 50 m³/sec. Filter area 27 m² (9 units, each with 3 m²) Differential pressure 3699 Pa Extraction connection at the filter inlet Ø 250 mm Extraction diameter max. 355 mm (manufacturer's specification) Exhaust connection at the filter outlet 600 x 600 mm Compressed air connection 5 bar Lsdpfsz Db Nijx Amzeah Compressed air requirement 60 standard liters per cleaning impulse Motor power 5.5 kW Power connection 400 Volt, 50 Hz. - Filter control via SIEMENS PLC S7-1200, with touch panel - Pneumatic filter cleaning, automatic via control system - Control cabinet fixed to the extraction system - 9 filter cartridges, type 51065081200, Ø 160 mm, length 1180 mm - Maintenance flap for filter change - Radial fan installed at the top inside, type VUVI 500 DF - 2 mobile dust collection containers, each approx. 106 liters (ECO bins) - Fire water connection with sprinkler nozzle in the filter chamber - Electrical wiring diagram available - Silencer on the air outlet side 600 x 600 x 1000 mm Space requirement L x W 1850 x 1500 mm Width with silencer on the air outlet side 2500 mm Overall height 4050 mm Footprint 1080 x 1080 mm Weight 820 kg (manufacturer's specification) Weight 1070 kg (weighed) Very good condition Transport dimensions for horizontal transport: Length 420 cm x Width 190 cm x Height 200 cm Transport weight: 1150 kg

Condition: used, axle configuration: 3 axles, first registration: 08/2003, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22,5, wheelbase: 9,480 mm, Year of construction: 2003, Equipment: ABS, Axle configuration Tire size: 385/65R22.5 Axle brand: BPW Rear axle 1: Tire tread depth left: 25%; Tire tread depth right: 25% Rear axle 2: Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle 3: Tire tread depth left: 40%; Tire tread depth right: 40% Weights Unladen weight: 12,190 kg Payload: 26,810 kg GVW: 39,000 kg Condition Damage: none Identification Lajdpfx Amoz Iacpjzeh License plate: OH-11-HH

Condition: used, machine/vehicle number: FN572336, Year of construction: 2018, operating hours: 10,006 h, load capacity: 1,600 kg, lifting height: 3,700 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 3,700 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 2,360 mm Own weight: 3,300 kg Battery voltage: 48 V Battery capacity: 750 Ah Battery type: 6 PzS Battery voltage in idle state: 51.6 V Service valid until: 09/2027 UVV (accident prevention regulations) valid until: 09/2027 Operating hours: 10,006 h EQUIPMENT Formerly a Jungheinrich full-service machine Clear-view mast without central hydraulic cylinder Load backrest Full cabin with heater and windshield wiper LED work light at the front LED work light at the rear Comfort seat Side shifter All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Laodoz S Np Iopfx Amzeh Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 111

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2006, loading space length: 13,440 mm, loading space width: 2,500 mm, loading space height: 2,550 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 8,860 mm, color: other, Equipment: tail-lift, Tailgate Plateau length: 170 cm Superstructure Fifth wheel height: 116 cm = More information = General information Year of construction: 2006 Registration number: OJ-58-NY Axle configuration Tyre size: 385/65 R 22.5 Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70% Weights Empty weight: 9.290 kg Carrying capacity: 32.710 kg GVW: 42.000 kg Functional Tail lift: 'D Hollandia DHSSUR11, slider lift, 2500 kg Condition Technical condition: good Visual appearance: good = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Ledpfxjzvatms Amzoah Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, mileage: 246,255 km, power: 97 kW (131.88 HP), first registration: 10/1993, fuel type: diesel, overall weight: 8,600 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2027, gearing type: mechanical, loading space length: 5,400 mm, loading space width: 2,300 mm, Year of construction: 1993, Equipment: crane, * German vehicle, TÜV (technical inspection) valid until 06/2027 * Good condition, engine, transmission, crane – everything is working * WDB6740131K031362 * ATLAS 60.1 crane, boom extension 2x hydraulic + 2x manual * Differential lock * Manual transmission * 3 seats * Pintle hitch * Tires 235/75 R17.5, front approx. 80%, rear approx. 70%, spare tire * Flatbed 5.40 m, lashing points * Unladen weight 5,475 kg, payload 3,125 kg * Currently registered with a gross vehicle weight of 8,600 kg, reduction to 7,490 kg possible * I would be happy to send you a video via WhatsApp * WhatsApp: * Polish contact, [Polish name]: * Sale only to businesses, no warranty, all information without guarantee, subject to prior sale Lasdpfx Amez Dqbnjzjh

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/1995, total width: 2,500 mm, suspension: air, tire size: 385/65R 22.5, tire condition: 20 %, wheelbase: 8,070 mm, color: other, Year of construction: 1995, Axle configuration Tyre size: 385/65R 22.5 Make axles: BPW Tyre profile: 20% Brakes: drum brakes Suspension: air suspension Max. front axle load: 9000 kg Middle axle: Max. axle load: 9000 kg Max. rear axle load: 9000 kg Weights Empty weight: 7.570 kg Carrying capacity: 31.430 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 05/2027 Identification Lsdpfx Amoz Rxamszsah Registration number: OD-19-PX