Used Busetti P4 for sale (723)

Condition: refurbished (used), Year of construction: 2008, functionality: limited functionality, operating hours: 20,000 h, power: 60 kW (81.58 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total width: 11,000 mm, total length: 12,000 mm, air pressure: 8 bar, pressure: 8 bar, Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Hodpfx Aaexxaitoijfk

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Hodpfx Aajzh I Iioisfk Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Hfedpsw A Nnpsfx Aaiek

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, single double edging machine with 12 cup wheels on each side max. glass size is 2600 mm Hfsdpfxeywyvmo Aaiek min. glass size is 170 mm machine sizes : L x W : 7700 x 4500 mm

Condition: new, Year of construction: 2026, Putz P4 cement For on-site preparation of plasters CEMENT, SAND, LIME Hfsdpfx Aetuiqyjaisk Pump motor 5.5 kw Mixer motor 2,2 kw 55/min Capacity for 2L6 pump approx. 25 l/min Capacity for 2L6 pump +++ 45 l/min Compressor 350 l/m Tank capacity 130 l Mixer capacity 130 l Height to mixer 118 cm Height to pump tank 71 cm Width of pump tank 64 cm Length without shoe 165 cm Weight 360 kg Included Working hose Air hose Spray gun Hose cleaning ball Shneka 2L6

Condition: used, Year of construction: 2001, machine/vehicle number: 526/01, functionality: fully functional, operating hours: 60,000 h, input voltage: 380 V, type of input current: three-phase, feed length X-axis: 1,250 mm, Used glass drilling machine with automatic ruler. In good condition. Hodpfx Aaex Rp Rgsiofk

Condition: new, functionality: fully functional, Year of construction: 2026, For our machines fit parts from German machines With water pump !!!! Technical data: Capacity depends on the type of pump . 6-35L / min. Max pressure max. 30 bar. Main motor - 5.5kW, - 400 rpm Basket motor : 0.55kW, - 28 rpm Diaphragm compressor 0.9kw, 250L / min Water pump Minimum water pressure 2.5 bar at machine on Capacity of hopper 145 L +/- 5 bags Height of hopper 910mm Width 720mm Height with motor 160 cm Weight with accessories 285 kg Basic equipment - rotor stator D6-3 - Plastering gun with 12mm nozzle - Pressure mortar hose 25mm, 10m with couplings - 1/2″ air hose - Water pump - Cleaner Hfedpfx Aaervi Sksiek - Mixer - Spray nozzle cleaner - Hose cleaner - Toolbox with - Operating instructions APPLICATION - gypsum plasters - Gypsum-lime plasters - cement plasters - lime plasters - lime-cement plasters - mineral plasters - insulating plasters - Mortars for filling joints - reinforcing and adhesive mortars - liquid screeds - masonry mortars - self-levelling putties

Condition: good (used), Year of construction: 2001, table diameter 200 mm workpiece height 100 mm number of wheels 1 Control Robot CNC total power requirement 6 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Hsdpett Tb Djfx Aaiefk Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - Fire protection device CONTROL axes; 4 axes + 2 programmable robots - simultaneously linear interpolation of the 4 axes + cylindrical interpolation of 2 robot axes

Condition: ready for operation (used), Year of construction: 2016, total length: 2,600 mm, total width: 1,600 mm, BUSETTI F10 USED, EXCELLENT CONDITION Hfedpozunbpefx Aaijk 2016 COLLECTION IN WROCLAW

Condition: used, functionality: fully functional, machine/vehicle number: W09STP238JWS27366, empty load weight: 12,480 kg, maximum load weight: 25,520 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 05/2027, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, tail-lift, Object number #31021 BPW Eco-Plus Drum brake Steering axle A2 Tire size 235/75 R 17.5 Sliding curtain Sliding tarpaulin Loading ramp Hydraulic lift platform Cable winch Hydraulic rear supports (2x) Rear extension possible Mechanical lifting roof ABS/EBS Raising/lowering Heavy-duty tie-down straps, external and central Storage box inside Interior lighting Remote control for ramp and platform Hfsdpfx Aaozta Uxjijk Leasing or financing available upon request!

Condition: used, functionality: fully functional, machine/vehicle number: W09STP238JWS27366, empty load weight: 12,480 kg, maximum load weight: 25,520 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 05/2027, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, tail-lift, Object number #31021 BPW Eco-Plus Drum brake Steering axle A2 Tire size 235/75 R 17.5 Sliding curtain Sliding tarpaulin Loading ramp Hydraulic lift platform Cable winch Hydraulic rear supports (2x) Rear extension possible Mechanical lifting roof ABS/EBS Raising/lowering Heavy-duty tie-down straps, external and central Storage box inside Interior lighting Remote control for ramp and platform Hfsdpfxjzta T Uo Aaiok Leasing or financing available upon request!

Condition: good (used), Year of construction: 2003, Professional and high-performance strapping machine from a renowned German manufacturer, with frame internal dimensions of approximately 500 mm wide x 400 mm high, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward threading system and a quick-change system for strap coils. - Up to approximately 50 straps per minute. - Strap release via a robust foot pedal. - Strapping tension is continuously adjustable. Hfsdpsztaa Iefx Aaijk - Soft tensioning possible. - Automatic strap loop ejection when strapping is released without any packaged goods. - Wear-resistant strap guides with a quick-change system. - The machine is height-adjustable and can be moved using castors. - Documentation consisting of operating manual, parts lists, and circuit diagrams. The machine can be demonstrated while powered on.

Condition: used, Year of construction: 2008, operating hours: 8,188 h, functionality: fully functional, mileage: 57,939 km, power: 72 kW (97.89 HP), first registration: 01/2008, overall weight: 5,000 kg, fuel type: diesel, color: grey, axle configuration: 4x4, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, suspension: steel, Equipment: additional headlights, air conditioning, self-propelled work machine: + Boschung + Pony P4T + Registered: 24.01.2008 Hfedpfx Aezrmfboaijk + 57,939 km; 8,188 operating hours + Hydrostatic transmission (fast/slow), max. speed 45 km/h + VM diesel engine, 2776 cc, 98 hp, Euro 4 + Switchable all-wheel drive + Front-wheel steering, all-wheel steering + crab steering + Front and rear hydraulics + Front lift + 3-way tipper + Auxiliary headlights + Radio/CD + Air conditioning + 470cm x 145cm x 220cm (l x w x h) + Permissible gross vehicle weight: 5,000 kg + From municipal ownership Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: good (used), Year of construction: 2005, Professional and high-performance strapping machine from a renowned German manufacturer, with frame internal dimensions of approximately 500 mm wide x 400 mm high, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward threading system and a quick-change system for strap coils. - Up to approximately 50 straps per minute. - Strap release via a robust foot pedal. - Strapping tension is continuously adjustable. Hodpfszq Ekyjx Aaiefk - Soft tensioning possible. - Automatic strap loop ejection when strapping is released without any packaged goods. - Wear-resistant strap guides with a quick-change system. - The machine is height-adjustable and can be moved using castors. - Documentation consisting of operating manual, parts lists, and circuit diagrams. The machine can be demonstrated while powered on.

Condition: used, functionality: fully functional, load capacity per storage section: 3,000 kg, shelf height: 7,500 mm, support length: 2,700 mm, shelf length: 28,320 mm, load capacity: 3,000 kg, overall weight: 12,000 kg, frame height: 7,500 mm, A high-quality BITO shelving system is for sale – inspected, complete, and ready for immediate use. Technical data: • Frame height: 7,500 mm • Clear bay width: 2,700 mm • Shelf load capacity: 3,000 kg • Bay load capacity: 12,000 kg • Upright: BITO P4 – 7,500 x 1,100 x 120 mm • Cross beam: BITO PT120M – 2,700 x 120 mm Scope of supply: • 11 x Upright frames • 80 x Cross beams • Incl. dowels, locking pins, and accessories Delivery and assembly are optional and can be arranged upon request – throughout Germany. Ideal for warehouses, logistics, production, or retail. Branded product from BITO, one of the leading manufacturers of storage technology. High-quality shelving technology at a fair price, as opposed to expensive new products. Hfjdpszqv A Hefx Aaisk If interested, please contact us – further quantities and sizes are available upon request.

Condition: good (used), Year of construction: 2005, Cardboard strapping machine, Mosca, – used: Price ex works: only €1,950.00 (net) ex works! Manufacturer: Mosca Type: RO-M-P4 Year of manufacture: 2005 Machine number: 78141 1L+N+PE, 50-60Hz, 230V, 0.85kW, 3.7A Control voltage: 24V Hfjdpfx Aszpf Iioaiek Condition: good Available: from approximately the end of October 2026 Location: Erfurt area

Condition: excellent (used), 4 units Year of manufacture: 2006/2004/2003/2002 Strap width: 5 mm, 9 mm, or 12 mm. Strap tension: Infinitely adjustable, also with gentle tension for delicate items. Maximum package size: 600 x 600 mm (width x height). Sealing system: Heat-seal welding. Table height: Approx. 820–925 mm. Minimum package height: Approx. 10 mm. Maximum package weight: Approx. 25 kg. Hfsdjv Sq Rrepfx Aaiok Strap material: Polypropylene (PP). Power supply: 230 V.

Condition: good (used), Valve block, hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Control block: Hydraulic control block -Valves: 23 P1 M/10 D4 P4-S1/20H -Individual components: see photos -Shipping/Price: complete -Dimensions: 270/270/H315 mm -Weight: 27 kg Hfodpfx Aajv U Rimsiok

Condition: excellent (used), Limitech Multi function mixer. In excellent condition, perfect for baby food, ready meals, mayonnaise, mashed potato, processed cheese etc. Full spec to follow. Hsdpfeuyvfzox Aaiofk

Condition: good (used), Technical data for the extension brackets: Manufacturer: Bito Hodpfxjyfl R Do Aaiofk Type: PRO Scope of delivery includes: 02x extension brackets, used Material color: Sendzimir galvanized Total height: approx. 295 mm Total width: approx. 85 mm For frame profiles: P6, P5, P4 Depth: approx. 40 mm Material thickness: approx. 4.00 mm Weight per piece: approx. 2.02 kg Note: No fastening material included in the scope of delivery. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is additionally required, extra costs will apply, which can be quoted separately depending on delivery location and scope of delivery.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, • Year 2004 • In our possession since 06/2023 • Complete gripper setup, with two modified grippers for Ø14 and Ø16 • Automated pallets for Ø3-4-6-10-12 • Various grinding wheels for roughing and finishing, some new, for both metal and HSS • Parkair electrostatic dust extractor • New user interface keyboard (3-4 years old) Hsdszcvakjpfx Aaijfk • New workpiece rotation belt (to be replaced in 2025) • Less than 100 operating hours since 2023 • Dedicated Transor filtration tank, year 2007, maintained with filter replacement and complete functionality check, with service performed in 07/2023 (over €3000 + VAT), less than 100 operating hours since maintenance -separate sale can be considered- • Price for machine + filtration system: €40,000

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, operating hours: 4,624 h, control type: CNC control, sheet thickness steel (max.): 2 mm, year of last overhaul: 2012, No minimum price – guaranteed sale to the highest bidder! A complete overhaul was carried out by Salvagnini in 2012! TECHNICAL DETAILS Maximum infeed length: 1,850 mm Maximum infeed width: 1,500 mm Maximum outfeed width: 1,500 mm Minimum length: 285 mm Minimum width: 190 mm Maximum diagonal: 2,150 mm Maximum reference dimension: 2,000 mm Minimum sheet thickness: 0.50 mm Sheet thickness, construction steel (max. 410 N/mm²): 2.00 mm Sheet thickness, stainless steel (max. 600 N/mm²): 1.25 mm Hodpfxszb H Txs Aaisfk Processing of pre-coated material: 3.00 mm Maximum tool length for CLA option: 1,000 mm MACHINE DETAILS Control type: CNC control Operating hours: 4,625 h EQUIPMENT LS Upper bending blade LI Lower bending blade Manual sheet support length adjustment CLA Long flange bending unit HP12015 R81 Cooling unit

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Laser power: 40000w/30000w/22000w/20000w/12000w/6000w/3000w Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 4000mm*2000mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Hodpfx Aaog Db Ufoisfk Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs. 2. Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost.

Condition: used, Year of construction: 1993, ANGULAR PROFILING MACHINING CENTER Brand: SAC Model: P4 Serial number: 9304 Year: 1993 Model: F5 Serial number: 93030 Year: 1993 Machines visible in our workshops CHARACTERISTICS : - Cutter rotation speed: 6000 rpm Hedpfxorx Tcge Aaiefk

Condition: used, Year of construction: 1964, machine/vehicle number: 63/10.2995-96, pressing force: 1,200 t, total length: 5,300 mm, total width: 2,690 mm, total height: 9,300 mm, overall weight: 360,000 kg, Press force: 1,200 tRam stroke: 600 mmRam adjustment: 500 mmStroke rate: approx. 10 – 16 strokes/minShut height: approx. 1,250 mmDrawing equipment:Drawing cushion force: approx. 240 tDrawing cushion stroke: approx. 250 mmPneumatic ejector in ram:Force: approx. 95 tStroke: approx. 150 mmTable size: approx. 3,500 x 1,900 mmHeavy-duty mechanical eccentric press in robust double-column design from Schuler, suitable for industrial applications as well as classical forming and deep drawing processes.The machine features a press force of 1,200 t with a fixed ram stroke of 600 mm and a ram adjustment of 500 mm. The stroke rate ranges from approx. 10 to 16 strokes per minute, allowing flexible use depending on the application.The working area is designed with a table size of approx. 3,500 x 1,900 mm, offering sufficient space for medium to large tooling.A key feature is the movable / sliding press table, which significantly simplifies setup and tool change and makes the machine ideal for handling heavy tools.The integrated drawing equipment (drawing cushion) provides approx. 240 t of force with a stroke of 250 mm, enabling demanding forming and deep drawing operations.In addition, the press is equipped with a pneumatic ejector in the ram (approx. 95 t / 150 mm), supporting automated part removal. Installation height max.: 1,250 mm Weight approx.: 360,000 kg Machine table clamping surface: 3500 x 1900 mm Passage between the uprights: 3,600 mm Serial number: 63/10.2995-96 Pressing force max.: 1,200 t Dimensions (LxWxH) approx.: 5300 x 2690 x 9300 mm Year of construction: 1,964 Condition: in working order Terms of payment: 100% prepayment before pick-up Hfedpfoy S Nhzex Aaijk Terms of delivery: From foundation under power: Yes