Used Bystronic Tpa H for sale (55,632)

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic material to rectangular glass panes within a production line for solar modules. The material forms a seal with a second glass pane, which is applied in a later process step. The panes are fed in, processed, and removed on horizontally running belts/conveyors. The thermoplastic applicator is a highly sophisticated machine that must meet many requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on the following pages. This helps to achieve high-quality and safe production. Performance and Connection Values Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant bead: 0.5 to 1.2 mm Maximum width of the applied sealant bead: 12.0 mm Required constant input pressure, pneumatics: 6.5 to 8.0 bar Operating pressure, pneumatics: 6.0 bar Compressed air consumption, normal operation: 10 normal liters/min Compressed air consumption during drum change: 500 normal liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Environmental Conditions and Emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity: 75% Sound level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material container D18 according to DIN 6644 – with base (F1) and smooth outer surface (body design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Njdpszdyh Hsfx Acfowh Processable glass panes Glass types Glass panes with a smooth surface (float glass) can be processed. Dimensions and Weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastic materials based on poly-isobutylene (butyl) can be processed. The material must be flowable in the range of approximately 110°C to 130°C and exhibit a defined viscosity profile. Use only materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic for the intended use. Detailed product descriptions and information on the handling, storage and disposal of the material used can be found in the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide. Dimensions, gantry robot with glass conveyor Height x Width x Depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Dimensions, drum pumps Height x Width x Depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H at drum pump FP1: 4400 mm Height H at drum pump FP2: 4000 mm Dimensions, control cabinet Height x Width x Depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material Butyl. Condition: used From a test laboratory, in like-new condition, only a few operating hours for testing! Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2015, Bystronic CO2 laser with 6000W laser power including automation and storage system. Automatic pallet changer Byvision cnc control Automatic nozzle centering Regulated Pulse Piercing Nozzle cleaning Collision detection Cooling unit Filter unit More info and videos available on request. Nwsdpfx Aezdtyiecfsh Viewing possible upon appointment. Immediately available. Working dimensions: 3000 x 1500 mm Laser output: 6000W Automation (sorting and storage): ASTES4SORT (12 positions) Storage: TRAFO (12 storage positions) Power on: 41643h Cutting hours: 25394h

Condition: used, • Load capacity 150 kg • Year of manufacture 2013 Nodpfx Aowcm U Hocfjwh • Maximum pane/frame size – 1500 x 2400 mm • Machine no. – L-220.1743 • Price upon request

Condition: good (used), Year of construction: 2014, Lifting capacity: 500 kg Swivelling, horizontal/vertical 6 suction plates Height: 1250 mm Width: 1250 mm Depth: 1150 mm Net weight: 130 kg Nwedpfxszb E Ius Acfsh Condition: good, second-hand

Condition: excellent (used), Year of construction: 1998, Year of manufacture: 1998 Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Nwsdswn Hfispfx Acfoh Serial number: 590 097 Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Reach: 250 mm Weight: 18,900 kg + Tools The machine is not fully operational; the right-hand cylinder is leaking; the machine descends unevenly; the hydraulic pump is noisy

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Nodpenyhvqjfx Acfewh Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Year of construction: 2007, condition: good (used), Used Bystronic Model VR – 3100mm x 6.5mm guillotine for sale Make: Bystronic Byshear Model: VR 6.5-31 Cutting capacity: 6.5mm Cutting length: 3100mm Rake angle 0.5-2.5 Nedpfxsq Dpuhs Acfswh Back gauge range 1200mm Max Back gauge speed 180 mm/s Hydraulic Variable Rake Guillotine Shear. Including cnc control CYBELEC DNC 60 Programmable Back Gauge. Auto Blade Gap Adjustment. Front Supports & Squaring Arm. New/year 2007 Bystronic vr 6.5 x 3000 – 3metre x 6mm guillotine for sale

Condition: new, Year of construction: 2019, Hello, for sale is a new spare part for a Bystronic table: CUTTING HEAD HUB10 ART. B-017530-V03-A. Nwjdpfxeygl Dts Acfjh

Condition: good (used), Year of construction: 2014, Lifting capacity: 1100 kg Njdpex R Spfsfx Acfowh Net weight: 175 kg

Condition: good (used), Year of construction: 2015, Lifting capacity: 500 kg. Dimensions of the goods: Width: 2300 mm. Height: 1600 mm. Depth: 320 mm. Nwjdpfx Acsxw H E Sefjh Weight: 80 kg. Condition: good, second-hand.

Condition: good (used), Year of construction: 2013, Lifting capacity: 300 kg. External dimensions: Nsdpexyqp Hjfx Acfjwh Width: 1000 mm. Height: 1500 mm. Depth: 400 mm. Weight: 50 kg. Condition: good, second-hand

Condition: good (used), Year of construction: 2002, Lifting capacity: 1100 kg. Includes 2 plug-in additional suction devices and storage rack. External dimensions: Nodjxyqpaepfx Acfswh Width: 1950 mm. Height: 1800 mm. Depth: 300 mm. Weight: 146 kg. Condition: good, second-hand

Condition: good (used), Year of construction: 2014, Lifting capacity: 550 kg. Nedpfxex Dtfre Acfjwh Weight: 100 kg. Condition: good, second-hand

Condition: used, maximum load weight: 6,470 kg, overall weight: 9,500 kg, axle configuration: 2 axles, first registration: 10/2001, next inspection (TÜV): 06/2026, loading space length: 6,150 mm, loading space width: 2,460 mm, loading space height: 2,350 mm, loading space volume: 35 m³, Equipment: ABS, * ABS Njdpfex En H Nex Acfewh * BPW axles * 5-chamber rear lights * Height-adjustable coupling device via offset plate * Front support ----Body: flatbed, sliding curtain left + right, 2-piece aluminium sideboards (600 mm), foldable centre post, hardwood floor, lashing rings. Loading height approx. 1,000 mm Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!! ALL INFORMATION WITHOUT WARRANTY, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations.

Condition: excellent (used), mileage: 380,592 km, power: 353 kW (479.95 HP), first registration: 08/2014, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: other, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 12,000 kg, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, power mirror, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Power brake booster - Speed limiter - Refrigerator - Air suspension - Media system - Particulate filter - Sun visor - Toolbox - PTO (power take-off) Njdpfeyiupdsx Acfswh - Central lubrication - Towing hitch = Further Information = Axle configuration Brakes: disc brakes Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steering; Suspension: leaf suspension Front axle 2: Tire size: 315/80/22.5; Max. axle load: 9,000 kg; Steering; Suspension: leaf suspension Rear axle 1: Tire size: 315/80/22.5; Dual tires; Differential lock; Max. axle load: 12,000 kg; Suspension: air suspension Rear axle 2: Tire size: 385/65/22.5; Lift axle; Max. axle load: 8,000 kg; Suspension: air suspension Weights Empty weight: 26,875 kg Payload: 10,125 kg Gross vehicle weight: 37,000 kg Functional Mast: Telescopic (10 sections) Mast length: 26.3 m Lifting capacity: 16,900 kg Lifting height: 2,630 cm Crane: PALFINGER PK92002-SH H, year 2014, mounted behind the cab Body manufacturer: PALFINGER PK92002-SH H CE marking: yes Condition Technical condition: very good Visual condition: very good MAN MAURER TGS 35.480 8X4H-6 BL WITH PALFINGER PK92002-SH H CRANE EURO 5 | L PACKAGE | 480 HP DRIVE 8X4H-6 BL WHEELBASE 530 CM LEAF / AIR SUSPENSION SLEEPER CAB WITH AIR CONDITIONING, REFRIGERATOR MEDIA SYSTEM, PHONE PREPARATION MANUAL GEARBOX TRAILER HITCH STROBE LIGHT FRONT AND REAR TOOLBOX LOADING DIMENSIONS: L=545CM, W=247CM PALFINGER PK92002-SH H 10X HYDRAULIC EXTENSIONS PALFINGER WINCH KBW007-A 18M TOTAL 5X JIBS CRANE CAN WORK IN FRONT OF THE CAB VIA 1X FRONT JIB RADIO REMOTE CONTROL MAX. LIFTING CAPACITY AT 4.3M: 16,900 KG MAX. WORKING HEIGHT: 26.3M

Condition: new, empty load weight: 652 kg, maximum load weight: 2,848 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, loading space volume: 2.5 m³, color: silver, construction height: 940 mm, working width: 2,060 mm, Hydraulics, Automatic reverse drive, Hot-dip galvanizing, Unbraked, Composite floor / honeycomb core - Extremely robust and weather-resistant, * IMMEDIATELY AVAILABLE * Composite floor / honeycomb core - Extremely robust and weather-resistant Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 3.500 kg - Unladen weight: 652 kg - Payload: 2,848 kg - Interior dimensions: 405 x 200 x 30 cm (L x W x H) - Exterior dimensions: 561 x 206 x 94 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13C steel rims / KNOTT parabolic suspension + 100 km/h - Brakes: yes - Support wheel: yes, automatic - Incl. Vehicle documents (letter) - 100 km/h at extra charge Standard equipment: - New dropside hinges incl. welded-on hooks for attaching a cargo net, among other things. - Aluminium drop sides with robust built-in locks - Anodized double-walled aluminium drop sides - All drop sides can be folded and removed - Removable steel corner stanchions - Insertion option at all 4 corners for tarpaulin frames, grid attachment, drop side attachments or front wall extension - Sturdy eccentric locks - Composite floor is extensively tested, The honeycomb structure consists of glass fibers and polypropylene-coated thermoplastic composites - This is a high-tech composite material made of long glass fibers in a polypropylene (PP) matrix. - Sturdy, lightweight and wood-free, making it sustainable and recyclable - Conditions of use tested in detail for impact and tensile strength, shear force, wear and resistance to weather conditions, among other things. - Reinforced stable bolted V-drawbar - very stable welded steel frame - frame completely hot-dip galvanized - many cross beams therefore high point load - additional longitudinal struts continuously welded in - all cross and longitudinal beams lie on the floor - 8 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV certified! - U-profile at the rear for easier attachment of the ramps - Cargo net hooks on the lower hinge sections - Parabolic spring axle from KNOTT - Wheel shock absorbers for 100 km/h fitted - Parabolic spring axle for absolute driving comfort! - Automatic reverse drive - KNOTT overrun device and parking brake - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic support wheel in the middle Special equipment included in the price: - Low chassis, 195/50R13C tires, loading floor height: 64cm Accessories optionally available, as partially shown in the pictures: - High front grille, 70cm - Tarpaulin + bows - Supports, grilles, side wall attachments, nets, etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Njdpfx Aceu Skr Tofjwh

Condition: new, Press brake tool/upper punch for Bystronic press brake Njdpfx Aceiim Dwjfjwh P5 RFA Style 30 degree H250mm R1.0mm Flexible length of L500mm, L508mm L515mm, L550mm in segment

Condition: new, Press brake tool/upper punch for Bystronic press brake Nodpfxekuz E Rs Acfewh P7 RFA Style 30 degree H250mm R3.0mm Flexible length of L500mm, L508mm L515mm, L550mm in segment

Condition: excellent (used), functionality: fully functional, 1 x Contact Packing Ltd pallet stretch wrapper with fold-down mast. The Exp-403 is an entry level premium machine. The operator has full control over how many wraps are applied to the top and bottom of the pallet giving you full control over how much film you apply to the pallet, something you would associate with machines costing much more. Excellent build quality, durability and user friendly. Model – EXP-403. Serial number – P1411T620. turntable dimensions - 1650mm diameter. Maximum wrapping height - 2200mm. Electrical requirements - 230 V / 50 hz / 1 phase. Power - 3.8 A. This stretch wrapper has the following features: - Home position: the turntable always stops at the same position. - Adjustable speed control on turntable (1-10rpm). - Choose between 1 & 9 top and bottom wraps with re-enforce wrap. - Up & down or up only wrap cycle. Nedjy N Sktspfx Acfewh - Spring break stretch. Video available on request.

Year of construction: 2009, condition: good (used), The Grunwald-HITTPAC AKH-059 is a 3-lane filling and closing machine. A rotary cup filling machine is a type of packaging equipment designed to efficiently fill and seal cups with various products, such as yoghurt, pate, kefir, cream cheese and other similar viscous or semi-liquid substances. These machines are commonly used in the food and dairy industry. The machine operates on a rotary system, which allows multiple cups to be filled and sealed simultaneously. The cups move through different stations, each dedicated to specific tasks like cup dispensing, filling, sealing, and capping. Installed cup dimension: 110 x 80mm (150g) Motor and vacuum pumps are protected and installed in the machine frame, underneath the table top. Dimensions: L: 2300 x W: 1800 x H: 2200mm Nwsdpem Ux Tiofx Acfjh Weight: 1500kg Power: 9kW Efficiency: approx. 2750 – 3750 cups/h (depends on the product consistency)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 225 t, stroke length: 200 mm, table length: 4,100 mm, overall weight: 15,000 kg, Equipment: safety light barrier, Fully Serviced Bystronic CNC Pressbrake Available for Purchase A high-quality, pre-owned Bystronic Xact Smart 225/4100 hydraulic downstroke CNC pressbrake is currently available for sale. This 2019 machine is fully serviced, operational, and ready for immediate deployment. Key Technical Specifications Manufacturer: Bystronic Model: Xact Smart 225/4100 Year of Manufacture: 2019 Bending Capacity: 225 tons Bed Size / Working Length: 4,100 mm (4 metres) Control System: ByVision touchscreen CNC control Total Axis Configuration: 7 axis total, featuring a 5-axis backgauge (X, X1, R, Z1, Z2) Crowning: Hydraulic deflection compensation Installation Requirement: Free-standing design; no foundation pit required Core Advantages High Precision: The 5-axis backgauge and hydraulic crowning ensure exact bending angles across the entire 4-metre bed length. User-Friendly Interface: The intuitive ByVision touchscreen control simplifies setup and reduces programming time. Cost-Effective Installation: The free-standing configuration eliminates the need for expensive floor excavations or pits. Nwedpfxozg Nq Nj Acfjh Feel free to let us know if you would like us to draft a formal quotation for you

Condition: like new (used), Year of construction: 2022, Used HMZ-3 FR CNC miter saw with routing unit The miter line consists of: - a miter saw with a 5.5 KW braked motor and a 700 mm saw blade; - an infeed roller conveyor with a working length of 6,500 mm and a pusher unit; - an outfeed roller conveyor with a length of 6,000 mm; - an industrial computer with a 17” LCD color screen; - computer-controlled axes; - optimization software for importing Tekla/HSB CAD files, etc. Saw machine specifications: - motor power 5.5 KW; - saw blade diameter 700 mm, saw height 250 mm; - angle adjustment from 0 to 270 degrees; - noise level 81 dB; - combined guard/sound hood over the entire saw; - 2 dust extraction ports; - pneumatic material guiding system for the saw; - centerline adjustment 200 mm Infeed conveyor specifications: - robust steel construction. - working length 6,500 mm (- rollers with a diameter of approximately 50 mm and a load-bearing capacity of 125 kg each). - adjustable feet, 100 mm adjustment range. Outfeed conveyor specifications: - robust steel construction. - approximately 6,000 mm long. - equipped with an automatic scrap chute. Automatic positioning unit specifications: - reading accuracy selectable: 1 or 0.1 mm. - positioning accuracy plus or minus 0.2 mm. - speed up to 80 m/min. - Servo motor with rack and pinion, driven by a frequency inverter. - steel guide with 8 adjustable bearings. Computer specifications: Njdpfezg Il Ssx Acfswh - Industrial computer with a 19” LCD touchscreen. - hard drive 200 Gb, and USB port. - network card and Windows 10. - special, H&M-developed, Dutch-language Windows software. - graphical display of the cutting pattern. - control from the office via a network or by importing a drawing program, e.g., HSB CAD. - integrated optimization module. Operation: A cutting list is created or called up on the control computer and activated. Then, the available lengths and quantities can be specified, so that the machine can optimize the cutting process. After that, the saw can be started, and the machine requests the desired length. The pusher is in the starting position, and the control system requests the correct length. After a start command is given, the pusher starts and the beam is pushed through the machine and automatically cut to the desired specifications. The cut product ends up on the outfeed table. Additional options on the machine: - Label printer with software and stand. - Supports for the saw (8 pieces). Routing unit The saw is combined with a routing unit with a 90-degree (vertical) stroke. Max. reach: - 150mm. Height - 120mm. Depth Dust extraction port for routing unit: 100mm.

Condition: new, Year of construction: 2022, 28.85 running meters. Wide span shelving 60 cm deep Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 28.85 running meters Shelf offer consisting of: - 16 x frame approx. 200 x 60 cm, disassembled. - 90 x traverse approx. 185 cm. - 45 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Stand blue. - New from stock. Nwjdjzhbfuepfx Acfeh - Other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. Delivery on request by us at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2360,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 28.55 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 28.55 running meters Shelf offer consisting of: - 16 x frame approx. 200 x 80 cm, disassembled. - 90 x crossbar approx. 185 cm. - 45 x support shelf approx. 184.5 x 79.5 cm. - 90 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. Nwedpfx Aszhbfhscfjh - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2887,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 57 rm. Wide span shelving 60 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 60 cm, disassembled. - 240 x traverse approx. 185 cm. - 120 x support shelf approx. 184.5 x 59.5 cm. - Incl. safety pins - Model : BLT , Type WR20/60 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Stand blue. - New from stock. - Other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. Nwodezhbfbjpfx Acfjh -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5885,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.