Used C.n.c. Working Center 3 Axes (X-Y-Z) for sale (115,404)

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) Iedpeyywcvsfx Apcear - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PowerControl (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machines with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) With pushing system to automatically infeed the workpiece Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 2500 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) Iaodjlkdpmopfx Apcor No. 5 Horizontal drilling spindles (4 in X + 1 in y)

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) Iasdpfxoyyvttj Apcer

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), movable working head. Vertical position of the panel (workpiece) Numerical Control TPA - Software Albatros Safety cabin (enclosure) of the working head Panels feeding by motorized chain/track Rubber-coated vertical rollers as fence and feeders during workpieces process In-feeding table (with motorized belts) - Out-feeding table (with motorized belts) With workpiece return system to the operator (180°) Min. useful working area (X - Y - Z) mm 260 x 40 x 10 (ca.) Max. useful working area (X - Y - Z) mm infinite x 1300 x 80 (ca.) Separate electric and command cabinet Total installed power (Kw) 35 WORKING GROUPS: Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 24 (7 in X + 17 in Y) Ijdoihfiiepfx Apcjar Drilling heads with horizontal spindles (No.) 2 Independent horizontal boring spindles (No.) 36 (9 LEFT + 9 RIGHT = 18 x 2) Drilling head motor-power (Kw) 3 x 3 (ca.) Vertical electro-spindle (No.) 1. Vertical electro-spindle motor power (Kw) 7,5 (ca.) Automatic Tools Changing System Revolver, with Tools storage plate (No. of folds-positions) 10

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 6 Support rails Front emergency carpets LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 rear spaces) + (No. 8 lateral spaces) Iaedpsyxn Tisfx Apcsr Max. useful working area (X - Y - Z) mm 3130 x 1250 (1550) x 100 (150) No. 2 Working areas - 1 x Vacuum pump (capacity 70 m3/h) Motorized carpet to evacuate chips and wastes Separate electric and command cabinet Total installed power A 32 WORKING GROUPS (TOP): No. 12 Independent vertical boring spindles (High Speed 7500) No. 6 Independent horizontal boring spindles (No.4 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. 1 Vertical electro-spindle: HSK63 (KW 9) OPTIONAL: Drilling Group with No. 4 horizontal boring spindles (Crosshead) PROFESSIONAL BARCODE READING SYSTEM

Condition: excellent (used), C.N.C. WORKING CENTER 4 axes (X-Y-Z-C) Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP / IMATRONIC - BIMA Fast Cut Working table with pods and rails. No. 8 Supports (rails) of length mm 1400 Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Iaodpfjvxhnuex Apcor Max. useful working area (X - Y - Z) mm 4200 x 1600 x 60 Min. workpieces dimensions (X - Y - Z) mm 295 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 4250 x 2200 x 60 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 28 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 14,5 (S6) / Kw 7,5 (S1) N° 3 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) N° 5 Air cushion tables (for the panel parking before being processed) Vacuum system with suction cups (controlled by CN) to lift panel onto outfeed belts Workpieces Outfeed system (from Bima Cut) with system with motorized belts

Condition: good (used), Cross table controlled, cross table NC, coordinate table, LM Guide Actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel: x= 310 mm / y= 500 mm / z= 125 mm -Spindle pitch: 10 mm Iodjqgi Ihjpfx Apcjar -Individual components: see photos -Dimensions: 750/550/H445 mm -Weight: 35 kg

Condition: good (used), Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 Iaodpfx Aji I Hdcjpcor -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. Ijdpfxexu H I Uj Apcsar The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: used, Year of construction: 2021, operating hours: 241 h, machine/vehicle number: Z60M-460, fuel type: hybrid, Weights Empty weight: 7.697 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 2.016 cm Other information Iajdpsw Dmvgsfx Apcjr Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: Outrigger Max. horizontal reach: 1115 m Transport dimensions (LxWxH): 6.3x2.49x2.54 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2020, operating hours: 218 h, machine/vehicle number: Z60M-223, fuel type: hybrid, Weights Isdpew A Hd Ujfx Apcear Empty weight: 7.697 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 2.016 cm Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Outrigger Max. horizontal reach: 1115 m Transport dimensions (LxWxH): 6.3x2.49x2.54 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 415 h, machine/vehicle number: Z60M-356, axle configuration: 4x4, fuel type: hybrid, Equipment: all wheel drive, Drive: Wheel Empty weight: 7.697 kg Mast: articulated arm Ijdstr Ihbspfx Apcjar Lifting capacity: 227 kg Working height: 2.016 cm Max. horizontal reach: 1115 m Transport dimensions (LxWxH): 6.3x2.49x2.54 Please contact PFEIFER GROUP for more information

Condition: used, power: 419 kW (569.68 HP), axle configuration: 6x6, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, EBS, air conditioning, - Brake system Iveco X-Way AS300X57 Z/P HR ON+ Short Timber Truck, axle configuration 6X4 (with hydraulically driven front axle 6x6), tandem medium drive axle (HR), disc brakes, cab version Active Space, large driver's cab, rear air suspension, 12-speed automated HiTroniX transmission, engine 570 C13 Cursor 13 570 HP Euro VI, wheelbase 4,800 mm, AS cab with high roof, roof insulation for cab, electrically operated lifting roof transparent for MLL high roof, air suspension for cab, fog lights, front halogen headlights, electrically adjustable and heated mirrors, hybrid bumper, front underrun protection, static passenger seat, one-piece lower bed, double thermo insulated box, digital tachograph 4.0, electronic immobilizer and 2nd vehicle key, luxury driver's seat air-sprung, heated, 4-way adjustable, lumbar and headrest with integrated 3-point seat belt, 2 reinforced anti-roll bars on rear axle, designed for moderate climates, exhaust outlet to the left, 170 Ah batteries, horizontal batteries on frame, rear suspension without spacers, generator 2,160 watts (24 volts x 90 amps), 2-cylinder air compressor 630 cc, rear shock absorbers, trailer socket for 24-volt operation, 15-pin, rear axle ratio: 4.23, heated fuel prefilter with separator, adaptive cruise control (ACC), ECO-Switch to switch between Power and Eco mode to optimize Total Cost of Ownership (TCO) by fuel-optimized engine and transmission settings, driving style analysis (DSE), transmission software eco-roll freewheeling function, VDI interface (Vehicle-Data-Interface) for telematics services (FMS) version 3.0, preparation for toll system (OBU), preparation for telematics system (telematics box), hill start assist (Hill Holder), electronic stability program (ESP), lane departure warning system (LDWS), emergency braking assistant, HI-TRACTION, rocking mode (free swing mode), left and right luggage compartments, 15m tire inflation hose, headlamp protection grilles, fully automatic air conditioning, leather multifunction steering wheel, sun roller blind, auxiliary heater diesel/water 4KW, front axle 8,000 kg / 1st rear axle 10,500 kg / 2nd rear axle 10,500 kg, spare wheel, reinforced front anti-roll bar, reinforced parabolic spring on front axle, AdBlue tank 80 liters, 50 mm 190 kN Ringfeder trailer coupling, fuel tank 550 liters, CAN bus interface CAN-OPEN for body control, infotainment system incl. navigation, axle load indicator, holding effect of parking brake on front axle, LED tail lights, retarder/intarder for ZF transmission, side marker lights, tires 385/65 R22.5 - 315/80 R22.5, bumper painted in cab color, aluminum air tanks, horn behind bumper, transparent sun visor. SCHEMEL–SHORT TIMBER BODY Iajdpfx Apoyfu Rmscjr Crane: Palfinger-EPSILON loading crane Y_CRANE_ON_2 M 12 Z91 - Fully hydraulic timber loading crane Manufacturer: EBERT Dimensions: approx. 6,750 mm between bulkhead and crane - 4 ExTe bolsters D5 – adjustable with clamp fastener and lashing ratchets or support for load securing - with 8 ExTe stakes D5 – telescopic - with special Z-profile subframe 200 mm high, closed with checker plate in the center of the frame - Bulkhead welded construction with internal special aluminum profiles approx. 2,600 mm high - 4 x ¼ mudguards...

Condition: used, power: 419 kW (569.68 HP), axle configuration: 6x6, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, - Braking system Iveco S-Way AS300X57 Z/P HR ON+ Short Timber Truck, axle configuration 6X4 (with hydraulically driven front axle 6x6), tandem medium rear axle with outer wheels (HR), disc brakes, cab version Active Space, large cab, rear axle air suspension, 12-speed automated HiTroniX transmission, engine 570 C13 Cursor 13 570hp Euro VI, wheelbase 4800 mm, AS high-roof cab, cab roof insulation, electrically operated lift-up roof, transparent with MLL high-roof, air suspension for cab, fog lights, front halogen headlights, electric adjustable and heated mirrors, hybrid bumper, front underride guard, static passenger seat, one-piece lower bunk, double thermo-insulated box, digital tachograph 4.0, electronic immobilizer and 2nd vehicle key, luxury driver’s seat air-suspended, heated, 4-way adjustable, lumbar and headrest with integrated 3-point seatbelt, 2 reinforced stabilizer bars rear axle, moderate climate version, exhaust tailpipe left, 170Ah batteries, horizontal batteries on frame, rear spring without spacer, generator 2160W (24V x 90A), 2-cylinder air compressor 630cc, rear shock absorbers, 24V trailer socket 15-pin, rear axle ratio: 4.23, heated fuel pre-filter with separator, adaptive cruise control (ACC), ECO-switch for switching between Power and Eco mode to optimize Total Cost of Ownership (TCO) via fuel-efficient engine and transmission calibration, driving style analysis (DSE), gearbox software with ECO-Roll freewheeling function, VDI interface (Vehicle Data Interface) for telematics services (FMS) version 3.0, prepped for toll system (OBU), prepped for telematics system (telematics box), hill start assist (Hill Holder), electronic stability program (ESP), lane departure warning assist (LDWS), emergency brake assist, HI-TRACTION, rocking mode (rock-free mode), luggage compartments left and right, 15m tire inflating hose, headlamp protection grill, fully automatic air conditioning, multifunction leather steering wheel, sun visor blind, diesel/water auxiliary heater 4kW, front axle 8,000kg / first rear axle 10,500kg / second rear axle 10,500kg, spare wheel, reinforced front stabilizer, reinforced parabolic spring on front axle, AdBlue tank 80L, 50mm 190kN Ringfeder trailer coupling, fuel tank 550L, CAN-Bus CAN-OPEN interface for body control, infotainment system incl. navigation, axle load indicator, parking brake holding force on front axle, LED rear lights, retarder/intarder for ZF gearbox, side marker lights, tires 385/65 R22.5, 315/80 R22.5, hybrid bumper painted in cab color, aluminum air tanks, horn behind bumper, transparent sun visor. Isdpfoyfq Dvjx Apcear SCHEMEL–SHORT TIMBER–ALUMINUM BODY Crane: Palfinger-EPSILON loader crane Y_CRANE_ON_2 M 12 Z91 - fully hydraulic timber loader crane Manufacturer: EBERT ALUCAR Dimensions: approx. 6,750 mm between bulkhead and crane - 4 ExTe bunks D5 – installed with ExTe clamp mountings, Alucar stops as mechanical securing of bunks, ExTe lashing points (hook or ring system) - 8 ExTe aluminum stakes D-5, telescopic, or C-5, telescopic, complete with ExTe stake mountings - Alucar aluminum subframe HD, height 195 mm, double cranked...

Condition: used, mileage: 300 km, power: 419 kW (569.68 HP), axle configuration: 6x4, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, - Braking system Iveco X-Way AS300X57ZP ON+ 6x4 Short Timber Transporter Ijdpfoyfqhuox Apcear Axle configuration: 3 axles, 2 driven axles, tandem axle variant Medio Semplice Riduzion, Brakes: disc/disc, cab configuration: Active Space, high-volume cab, rear axle air suspension, 12-speed HiTroniX automated gearbox, engine: Cursor 13, 570 HP Euro VI, wheelbase 4,800 mm, intended for mixed use—road and light off-road, permitted gross weight: 26-30 tonnes, AS high-roof cab, electric lift roof, transparent, cab air suspension, one-piece lower bunk, soft firmness/comfort, luxury air-sprung driver’s seat, heated, multi-adjustable, right armrest, lumbar support and headrest with integrated 3-point safety belt, air suspension on rear axle, rear axle ratio: 3.40, transmission software with ECO-Roll freewheel function, hill start assist (Hill Holder) for comfortable hill starts, electronic stability program (ESP), lane departure warning system (LDWS), advanced emergency braking system (AEBS), rocking mode, fully automatic air conditioning, leather steering wheel with multifunction controls for radio/phone/menu, sunblinds for side windows—driver and passenger side, diesel/water auxiliary heater 4kW, top refrigerator incl. thermo-isolated box, axle weight variant: front axle 8,000 kg, 1st rear axle 10,500 kg (technically possible 11,500 kg), 2nd rear axle 10,500 kg (technically possible 11,500 kg), AdBlue tank 80 liters, trailer coupling 50 mm, 200 kN, trailer coupling brand Ringfeder, 550-liter aluminum fuel tank left side, rear frame overhang 1,990 mm, end crossmember D-value: 200 kN, LED tail lights, retarder/intarder for ZF or Allison automatic gearbox, color: Moss Green IC 099 RAL 6005, tires 385/65 R22.5 – 315/80 R22.5, transparent sun visor exterior on cab roof, SHORT TIMBER BUNK BODY, Crane: Palfinger-EPSILON loading crane Y_CRANE_ON_2 M 12 Z91—fully hydraulic timber loader, brand: EBERT, approx. 6,750 mm between bulkhead and crane—4 ExTe bunks D5—slidable with clamping lock and securing ratchets or counterholder for load securing—with 8 ExTe stakes D5—telescopic—with special Z-profile subframe, 200 mm high with checker plate closed—bulkhead welded construction with specialized inner aluminum profiles, approx. 2,600 mm high—4 x ¼ mudguards with spring-loaded tarpaulin covers for rear axles—raised tail lights and supply carrier with step for safer access—installation of side marker lights—ascent to crane, DUO-Matic compressed air connection—covers over battery box and air reservoir with aluminum tread plate on both sides—electrical and hydraulic connections (engine start/stop from crane seat)—aluminum step tool box for chainsaw, etc.—stainless steel tool box—holder for snow chains—holder for broom and shovel at the bulkhead—superstructure sandblasted, flame-spray galvanized, epoxy primed and painted in acrylic quality—oil fill—TÜV inspection—UVV inspection—tachograph check Upon request, we can provide you with a leasing or financing offer. Mr. Ebert (Tel. ...) will be happy to assist you. For further information, please visit our homepage.

Condition: new, Year of construction: 2026, FORMA Z folding machine is the most flexible and diverse sheet metal folding machine in our portfolio. Folding both up and down, FORMA Z folding machine eliminates the need to flip material, providing time-efficient folding of complex parts using one operator. The Combi beam rotation between two tooling set ups and the unique geometry gives you unrivalled working space. The automatic tool locking is fast and has features making tool changing very ergonomical. The folding beam has automatic crowning, automatic folding center adjustment and automatic sheet thickness adjustment, which provides superior folding quality in all thicknesses and across the folding length. The large number of vacuum grippers holds the part steadily, anywhere on the back gauge. Large blanks as well as small, one as well as several. The back gauge comes in many designs, which gives you great freedom of choice in how you would like to operate the machine and manage the flow of blanks and parts to/from the machine. Last, but not least – FORMA Z is fast: more production in less time for you! - CNC controlled crowning of folding beam - CNC folder that folds upward and downward, no need to flip the material. - 150 mm movement of folding beam, to move outside of material on folding side. Isdpfomhhn Esx Apcear - The Combi beam comes equipped with 203 mm (8”) High Divided Tools and straight rail. - Comes as standard with multifold tooling, CNC controlled sheet thickness and folding center adjustment. - The folding beam can be used as front gauge up to 150 mm. - Add vacuum grippers to make work lighter, more precise, and automated!

Condition: new, Year of construction: 2022, messurements (LxWxH): 3660 x 1340 x 2500number of axes: 3pressure: 120 Tonnenweight approx.: 7000 kgoil filling: 200 Litermotor power: 11 Press Brake Control Unit : Esa S 630 Cnc 10 2d Graphical Screen - Touchscreen Control Unit Panel : Swivel Pendant Arm Hydraulic Press Brake Valve Option : With Ce Safety Signals Press Brake Safety Plc : Mcs Plc Safety Plc Iajdpfx Apshut Aajcer Press Brake Laser Safety System : Dsp-Ap Safety Block Laser Manual Height Adjustment) Press Brake Back Gauge : X Axis, 500 Mm Range, Including 2 Fingers, Manually Adjustable In Height And In Lateralposition. Press Brake Finger For Back Gauge : Standard Xf Arka Ve Yan Muhafazalar : Var (Ce'Li Model) Press Brake Top Tool Clamping : Manual European Type L:150 Mm (Promecam) Press Brake Top Tool : Eurostamp 1260 / Standard (835 Mm And 805 Mm Sectioned To 595 Mm And 210 Mm ) Press Brake Bottom Die Holder : Mechanical European Type Standard Width (Promecam) Press Brake Crowning : Cnc Adjustable Motorized Crowning (V-Axis) Press Brake Bottom Die : Eurostamp 2067 / Standard (835 Mm And 805 Mm Sectioned To 100 Mm Lh, 395mm, 210 Mm And 100 Mm Rh) Press Brake Front Support : Xf Ön Destek Press Brake Front Support Number : 2 Pcs Support, Manually Adjustable In Height And Inlateralposition. Electrical System : 380 V-660 V, 50-60 Hz, 3 Ph ( I E 3 ) Electric Cabinet Cooling System : Air Ventilation With Fan Number Of Foot Pedal : One Label Group : Label Group English Packaging Method : Plastic Cover With Strech Flim Shipment Method : Standard

Condition: like new (used), Year of construction: 2005, operating hours: 3,847 h, Universal Milling Machine DMU 50 (3+2 Axis Machining) Year of manufacture: 2005 Spindle run time: 1,315 h Control: Heidenhain iTNC 530 Working area (travel): Isdpfjy Dcnrsx Apcoar X-axis ..... mm ..... 500 Y-axis ..... mm ..... 450 Z-axis ..... mm ..... 400 C +/- 360° B +110° / -5° Spindle (Power package) Tool holder: SK 40 DIN 69871 Spindle speed: steplessly programmable from 20 - 10,000 rpm Rotary Table Dimensions: D630 x 500 mm T-slot spacing and size/diameter: 63 / 14H7 mm Center bore diameter: 30H6 mm Rapid traverse B and C-axis: 6 revolutions per minute Table rotation: 360 degrees Swivel range: 115 degrees (from -5 to +110 degrees) Table clamping: hydraulic Tool magazine Magazine positions: 16 Max. tool diameter: see tool section Max. tool length from spindle face: 300 mm Max. tool diameter at 8,000 rpm: 130 mm Max. tool diameter at 10,000 rpm: 80 mm Max. tool weight for automatic tool change: 6 kg Max. total tool weight in magazine: 50 kg Accessories 3D probe (Heidenhain) Tool holders SK 40 The machine was used for single-part production in prototype manufacturing. The machine is immediately available. Can be inspected under power at the seller's location. Location: Rhein/Main

Condition: used, overall weight: 600 kg, Equipment: type plate available, Modular assembly and testing cell with X-Y-Z handling using the Schneider Lexium 32 axis module - Schneider handling travel distances: X = 500 mm, Y = 420 mm, Z = 175 mm - Integrated Siemens CPU 315-2DP/PN and HMI MP177/3 - Functional basic software, flexibly expandable - Operable via Sick safety light curtain C4000 eco or can be used independently as an automatic station - PLC program and circuit diagram available - LXM motion controller included for expansion functions such as path travel, etc. System dimensions: 1300 mm wide 1600 mm deep Ijdpfxsy A Ri Ij Apcsar 2200 mm high System weight: approx. 600 kg If you have any questions, please feel free to contact us. We will get in touch with you.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Ijdpfx Apoyzxyxocsar Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at the width stop: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: electric Pivot adjustment saw blade: electric Width stop adjustment: electric Iaedpfx Aehpl Unopcjr Display saw blade angle: digital Display cutting height: Digital Display width stop: Digital Display cutting ruler: Digital Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 1000kg

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 350 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, SK LASER KOLLTRONIC F20iW1 · IPG MOPA 20 W · XXL Workstation · X/Y/Z axis travel Laser Safety Class 1 · CE · Made in Germany System concept: - New complete system with IPG MOPA 20 W fiber laser + XXL workstation for productive operation. The workstation features a - removable central worktable, with the floor area beneath freely accessible. XXL Workstation: - Seated/standing workstation with ample legroom - Aluminium housing - Bright work light, extraction nozzle DN50 - Side and front doors: left and right side, front door with slot - Doors monitored by sensors, safety equipment: emergency stop, interlock, safety relay Axis system – SK LASER X/Y/Z travel: - Gantry with 2 motorized Z-axes and rotary axis - X-axis 500 mm computer-controlled - Y-axis 2 × 500 mm computer-controlled - Z-axis 350 mm computer-controlled (travel path depends on installation) - 2 spindles per axis for increased stability - Axis controller Ijdpfx Aeyizvwopcjar - Made in Germany Laser – IPG MOPA fiber laser: - Output power: 20 W - Peak power: 1 mJ at 20 kHz - Pulse duration: 2-350 ns, MOPA (plastic-compatible) - Wavelength: 1060 – 1070 nm - Pulse frequency: 20–80 kHz - Beam quality M² < 1.6 - Air-cooled, power consumption < 400 W - Red pilot laser + 2 distance lasers (650 nm,

Condition: used, Surface grinding machine, grinding machine, surface grinding machine-horizontal, surface grinding machine, magnetic grinding machine -Manufacturer: Blohm, surface grinding machine-horizontal -Table size: 770 x 140 mm, swiveling -Travel paths: x 490 mm / y 200 mm / z 220 mm Isdpfx Ast N Adbspcear -Dimensions: 1030/870/H1510mm -Total weight: 403 kg

Condition: new, Year of construction: 2025, Ref. -No.: 10457 Manufacturer: IGREK Type: VMC 1160 Year of construction: 2025 Type of control: CNC Control: SIEMENS SINUMERIK 828D Storage location: Istanbul Country of origin: Türkiye X-Travel: 1160 mm Y-Travel: 610 mm Z-Travel: 600 mm Main spindle drive power: 9 kW Spindle Taper: HSK Tool Piece Magazine With: 24 Pcs./pcs. Spindle Speed: 10000 RPM Rapid Traverse X-Axis: 40 m / min Rapid Travel Y-Axis: 40 m / min Iaodpfxjxmd Snj Apcsr Rapid Traverse Z-Axis: 40 m / min Machine length: 3500 mm Machine width: 2900 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 8 t Further information: This is a new storage machine with 0 operating and spindle hours. The machine is available immediately and can be ordered with Siemens or Heidenhain controls. Optional installation and servicing of the machines can be offered.

Condition: new, New electromagnetic gear coupling feeds X/Y/Z for tool milling machines produced by TOS / INTOS Žebrak FNG/FNGJ/FNGP series. For enquiries, please indicate the exact type of machine. More parts available. Iaedpfxedx Rfie Apcer