Used Camam Vertical for sale (7,290)

Condition: used, 4-spindle adjustable vertical drilling machine, Camam brand + 3 spindles to be revised Codsivutcjpfx Ad Nerb

Condition: excellent (used), CAMAM MO-4A double-sided oscillating drilling machine Number of spindles per side 3 Tool mounting chuck basket 16mm Oscillation adjustable from 0-75mm Distance between spindles 50-900M Crsdpetp Tnzsfx Ad Nsb Two spindle speeds 4500/9000r.p.m Two pneumatic material presses per side

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Crodpfxsyug R Rj Ad Neb The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection Crsdpjyug Hxsfx Ad Nob • interface for Grundfos CIM fieldbus module.

Condition: used, Year of construction: 1998, Brush polisher for elements brand Camam model C/1N/1S serial number 98001, year of construction 1998, CE marked Power supply 380V 4.5 Kw 13 Cjdpfjlagc Sox Ad Nsrb Weight 530 Kg. Complete with declaration of conformity and installation and maintenance manual.

Condition: new, functionality: fully functional, power: 250 kW (339.91 HP), fuel type: electric, color: other, overall weight: 19,000 kg, Year of construction: 2026, These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and times, and to increase their crushing performance with their low investment costs. VSI-1000 technical specifications: Model: VSI-1000 OR Crodjy Atc Rjpfx Ad Nob Capacity: 150-400 T/H Rotor Size: Ø 1000mm Maximum Feeding: 100mm Motor Power: 2 x 200-250 kW Speed: 50 – 70 ms Weight: 19000 kg General Specifications and Features: – Fine product, low wear cost, cubic shape, application flexibility and maintainability. – Rotor and crushing chute with stress relieved welding – Inner surfaces of the crusher is coated with wear resistant lining plates – Hydraulic opening cap – Automatic lubrication system

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: C17037, saw blade diameter: 500 mm, cutting width (max.): 200 mm, CNC CUTTING CENTER WITH TILTING BLADE CAMAM MOD. TAC CNX – CE RULES - 1350mm x 200mm x 80mm capacity - Cutting thickness from 10mm to 80mm - Cutting width from 10mm to 200mm - CNC controlled advancement speed - up to 60m/min - CNC controlled - +/- 60 degree rotation - 4kW saw motor with adjustable RPM - Saw blade diameter 500mm - Completely enclosed interlock saw cabin - Outfeed conveyor belt - Automatic bar feeder and magazine - Infeed length with loader max 3.000 mm Credpfxjywdzgo Ad Nob - S/N C17037 - Year 2017

Condition: used, Year of construction: 2010, 2010 machine, little used, requires inspection and maintenance. Cedpjywhmysfx Ad Nsrb

Condition: used, functionality: unexamined, total height: 5,000 mm, total width: 1,200 mm, total length: 3,600 mm, input voltage: 400 V, input frequency: 50 Hz, DenoLift Vertical Carousel / Paternoster approx. 5 m – Fully Functional – Industrial We have a used DenoLift carousel (paternoster) that we are considering selling and would like to know if this system might be of interest to you. Specifications (indicative): Brand: DenoLift (Denocard) Type: vertical carousel / paternoster Dimensions: approx. 3.6 meters long × 1.2 meters wide Height: approx. 4 – 5.5 meters Crjdpjyplqrofx Ad Neb Control: numeric keypad with LED display (older model) Price: 5000 EUR This is an industrial storage system with significant capacity. The installation is currently set up and can be dismantled and collected by arrangement. Upon request, we can provide additional photos, a video of the system in operation, and any available technical data.

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Crjdpjyr Numofx Ad Njb Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. Crjdpfxev Aalys Ad Neb - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Year of construction: 2002, condition: used, 2002 Camam US/1C Chair Leg Equalizer. Crsdpfxevcc Rle Ad Nsb Bench cm. 70x70

Condition: used, 2-spindle vertical drilling machine Crjdpfsyg Ix Tsx Ad Njb

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm Crsdpfexc I Dgsx Ad Neb VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: new, Automatic hopper feeder and loader 1350mm length capacity (longer on request) Adjustable feed stroke- pneumatic / mechanical - standard model Piece positioning device with double pneumatic clamps. 3KW motor with 500mm blade. 2800 rpm. Mechanical blade angling 0 degrees / + / - 60 degrees. Minimum infeed length 200mm / maximum 1350mm. Minimum section 20mm wide x 10mm thick / maximum 200mm wide x 100mm thick Movement / feeding of timber adjustable 1 to 395mm PLC control Credsn Nv Tijpfx Ad Nsb Maximum production 500 - 800 pieces per hour (depending on length of cut). Pneumatic head stroke. CE safety enclosure. Overall dimensions 2450mm x 1000 x 1900mm.

Condition: used, Year of construction: 2000, Pneumatic clamps to immobilize chairs while the operator performs operations, for example via screwdriver or similar Working dimensions: cm. 50x60 Crodpfxsydb Hxj Ad Nob

Condition: good (used), Year of construction: 1997, functionality: fully functional, We offer an nice condition Matsuura with tools and accessoriess, very atractive machine for a serious work. Description Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Country of Origin: Japan. Spindle Chiller WASTE CONVEYOR Codpfovkx Rksx Ad Njrb with Yasnac i80M Control 20 Position: ATC BT40 : Taper Specifications Manufacturer MATSUURA Model MC600VF Year 1997 Condition Used Serial Number 970112285 Table size 870 x 400mm Coolant tank X = 600 Y = 410 Z = 470mm Spindle speeds 30 – 15000 rpm.

Condition: used, Year of construction: 2004, Pneumatic press for upholstery, Camam brand, year 2004 (CE), used Codpfx Adeyccuho Njrb Dimensions and weight: Cm. 90*60*H 200. Weight 200 kg (1 piece)

Condition: used, Year of construction: 1997, 1997 Camam FMS/8A Chair Back Drilling Machine Crodperfh Ehsfx Ad Nsb

Condition: used, Single hobbing machines brand Camam, for grooving pins to be inserted into holes or mortises with glue Csdpfsx Uqlyex Ad Norb

Condition: used, Year of construction: 1998, functionality: fully functional, overall weight: 2,060 kg, total height: 2,200 mm, total width: 3,500 mm, total length: 1,300 mm, SECOND-HAND HYDRAULIC CLAMP COUPLE FOR CHAIR ASSEMBLY CAMAM MOD. SIPM - CE Codpfjx Rrplox Ad Norb - Hydraulic pump power HP 5.5 (kW 4.0) - Productivity 60-120 assambled chairs/hour - Dimensions mm 3500x1300x2200 H - Weight kg 2060 - CE rules - Voltage: 380/50 - Year: 1998

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 177, SECOND-HAND BRUSHING MACHINE CAMAM MOD. CAM - CE RULES - S/N 177 - Year 2000 Crjdpfx Asx Rn Tyjd Neb

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Crsdpfxexpqm Rs Ad Nob Chip conveyor Front door: partial opening M0 / full opening

Condition: used, Year of construction: 1998, functionality: fully functional, SECOND-HAND HIGH SPEED VERTICAL MILLING MACHINE CAMAM MOD. FV/1T-1P - Volt. 380/50 - CE rules - Year 1998 Cjdpjx Rdhtofx Ad Njrb

Condition: used, Year of construction: 1996, functionality: fully functional, SECOND-HAND MULTIPLE BORING MACHINE CAMAM MOD. FMV/4U - 4 BORING UNITS Crjdpfx Adjx N S Tbe Nob - N. 4 independent boring units - Control panel - Year 1996 - CE rules