Used Car Bottom Furnace for sale (12,115)

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. Ibodpfezu Nvzjx Acpjc The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New unit, in stock, immediately available -Volume 18,000 liters -Maximum temperature 350°C -Internal dimensions L x W x H 4100 x 2100 x 2100 mm -External dimensions (with rails) L 9970 x W 3060 x H (with lift-up door) 6110 mm -Control system Eurotherm Nanodac -Temperature stability (at rated temperature without load) ±5°C -Automatic inlet and outlet air dampers -Electric lift-up door -Electrically driven hearth carriage -Power 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration We would be pleased to offer installation and commissioning, as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enamelling furnace, drying oven, industrial furnace, heating chamber, heating oven, temperature oven, drying cabinet, chamber furnace, large-volume furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln. Ibsdpfxeu Hma Ns Acpec

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Fuel: natural gas Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gas operating pressure: 8 kPa Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C Iodpfsycvxmsx Acpebc TNV temperature: 930 °C Usable volume: 4.3 m³ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), functionality: fully functional, Batch furnace on trolley Manufacturer: Av Eujc Year of manufacture: 2007 Ijdpeza S Ewjfx Acpsbc Technical data: Batch weight: max. 15 t Usable dimensions: 3300 x 2200 x 1600 mm (L x W x H) Operating temperature: max. 950 °C Temperature uniformity: +/- 10 °C at the end of the holding time 6 pulse burners "System Löcher" on the furnace door of the trolley including: Control cabinet and gas control system Turnkey, including installation, excluding freight

Condition: used, Padelttherm HGU 9408/800 Hearth Furnace with Recirculating Air For sale is a professional Padelttherm heat treatment system / hearth furnace with recirculating air, type HGU 9408/800. The system was used for the heat treatment of aluminum housings and is designed as a gas-fired hearth furnace with air circulation. Two chain conveyors are also part of the documented overall system. Technical data: Manufacturer: Padelttherm GmbH Type: HGU 9408/800 Year of manufacture: 2019 Design: Hearth furnace with recirculating air / heat treatment system Material processed: Aluminum housings Temperature / Heating capacity - Max. permissible furnace chamber temperature: 800 °C - Operating temperature: 680 °C - Heating time from 20 °C to 680 °C: approx. 5–5.75 hours - Max. gross load weight: 4,900 kg - Heating medium: Liquefied petroleum gas (LPG) - Lower calorific value: 25.89 kWh/m³ - Gas inlet pressure / flow pressure: 100 mbar Iodpfx Acjz Hvzrepobc - Connected load: 523 kW - Natural gas flow rate: 20.2 m³/h - Combustion air: 560 m³/h at 80–100 mbar Burners / Recirculation - 4 burners, each 130 kW - 2 with pilot burners - Burner type: Cold air burner - Automatic ignition - Ionization flame monitoring - Individual burner control - 2 burners per recirculator - 2 hot gas recirculation fans Control technology - 2 control zones, front / rear - Electrical connection: 400 / 230 V, 50 Hz - Total electrical connected load: 21 kW - Hot gas recirculators: 2 × 4.0 kW - Combustion fan: 7.5 kW - Lift-up door drive: 1.5 kW - Hearth car drive: 1.5 kW - Controller: JUMO DiconTouch - Control behavior: PID - 10 programs - Display / Operation: DiconTouch - Temperature safety limiter: 2 × JUMO safetyM STB/STW - Thermocouples: NiCr-Ni Type K, Class 1 Usable space - Usable volume: 9.41 m³ - Usable width: 1,500 mm - Usable depth: 4,200 mm - Usable height: 1,300 mm - Internal dimensions: 1,600 × 4,300 × 1,400 mm Furnace dimensions - Width: 2,900 mm - Depth: 5,200 mm - Height: 3,330 mm - Weight: approx. 13,000 kg Overall dimensions of the system: - Width: 3,270 mm - Depth including track: 10,165 mm - Height including door portal: 4,355 mm Hearth car: - Width: 1,870 mm - Depth: 4,570 mm - Height: 780 mm Chain conveyor KF1400x120x80 - W × D × H: 1,785 × 14,680 × 1,850 mm - Weight: approx. 7,900 kg KF700x120x80 - W × D × H: 1,775 × 7,280 × 880 mm - Weight: approx. 1,650 kg "Everything from one source: We will gladly offer you a suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New machine, immediately available, 12 months warranty -Internal dimensions (w x d x h): 1250 x 4000 x 1450 mm -External dimensions (w x d x h): 1900 x 4900 x 2500 mm -Power consumption: 240 kW -Current consumption: 350 Amperes -Maximum temperature: 1300 °C -Oven weight (approx.): 6000 kg -Control system: JUMO IMAGO 500 -Software packages: (OPCA & PCC) -Display unit: JUMO Logoscreen 601 -Includes: feedthrough hole and 6 additional slots for recording type K customer thermocouples -Multi-zone design (3 zones) Iedpfjy Avmlex Acpsbc -Switchgear with solid-state relays -Climate control for the switchgear -Automatic inlet and outlet dampers -Controlled cooling system (including frequency converter, controlled via the control system) -Electrically driven furnace car -Maximum load: 3.5 tons -Swinging door -Documentation, CE declaration We would be happy to offer installation, commissioning, and training for your employees. Please contact us! We stock new and used industrial furnaces. Inspections in our warehouse are possible upon request. Furnace car oven, car hearth oven, furnaces, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, oven, stress-relieving furnace, enamelling furnace, drying oven, industrial furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020012.010, total height: 870 mm, total width: 750 mm, total length: 1,400 mm, Equipment: documentation/manual, COMMERCIAL SALE As part of the liquidation of a company, we are selling the following used packaging machines. All machines offered are fully functional and were used in ongoing operations until recently. If you have any questions about the individual machines, possible combinations, or further details, please do not hesitate to contact us. Delivery and collection are possible by arrangement. Location: 41564 Kaarst-Holzbüttgen Iedpfoz S Hwvjx Acpsbc 1. & 2. Simons+Harren carton sealer NH-FJ-2 Two identical semi-automatic carton sealers, type NH-FJ-2 - 1x manufactured in 2020 - 1x manufactured in 2018 Technical data (both machines): - Operation: manual / pneumatic, 230 V - Sealing: Tesa adhesive tape - Dimensions: L 1,160 x W 970 x H 750 mm - Carton sizes approx.: L 150–∞ x W 120–470 x H 120–450 mm Price, manufactured in 2020: 3,000 EUR net Price, manufactured in 2018: 2,500 EUR net 3. Youngsunpack carton sealer MHFJ1AB (2013) Semi-automatic, 230 V, Tesa adhesive tape Dimensions: L 1,100 x W 770 x H 700 mm Carton sizes approx.: L 150–∞ x W 120–480 x H 120–480 mm Price: 1,000 EUR net 4. Heripack HV-TX52.B (2018) Semi-automatic carton sealer / bottom closing machine 230 V, Tesa adhesive tape, automatic format adjustment Dimensions: L 1,400 x W 750 x H 870 mm Price: 2,700 EUR net 5. Simons+Harren bottom flap folding machine CF-10T (2017) Pneumatic side gusset folding machine Dimensions: L 1,400 x W 750 x H 870 mm Carton sizes: L 200–600 x W 150–480 x H 120–500 mm Price: 1,700 EUR net 6. Heripack bottom flap folding machine HB-Sonder (2020) Pneumatic/electric, side gusset folding machine Optimized for combination with item 4 (HV-TX52.B) Dimensions: L 1,650 x W 740 x H 750 mm Carton sizes approx.: L 150–800 x W 110–400 x H from 90 mm Price: 2,500 EUR net (Particularly attractive as a set with HV-TX52.B) All machines are available individually.

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Iedpfxsztrbwj Acpjbc

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18-4101, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), This machine is specifically designed to produce highly accurate two-layer herringbone flooring. Applicable joint types: - Left and right models with tongue and groove - Groove and groove models - easylox® models (patented connection system) Planks are picked up at the front and placed into the machine. Grippers take over the plank and guide it along the profiling cutters. Here, the profile is created, and the bevel, if any, is applied. Then, the planks are transferred to a second transport system, which places the plank in a position where the tongue/groove or groove/groove, or easylox® joint is applied. The machine is fully CNC-controlled and extremely precise. Squareness, length, bevel size, and fit are fully computer-controlled and can be adjusted with high accuracy. Iodpfx Asz Rkd Docpobc Smallest herringbone dimension: 90x450mm Largest herringbone dimension: 220x1200mm The machine consists of: “Sigmatek” digital touchscreen control panel; stack infeed arm, plank infeed unit, milling carriage, end machining unit, transport clamps, fixed milling position, pocket milling units, stack output unit, plank output unit; capacity, minimum thickness 12 mm, maximum thickness 25 mm, working pressure compressed air 7 bar, milling carriage feed speed 6 - 14 m/min, milling cutter overhang Ø 210 mm / 250 mm, profiling cutter Ø 250 mm, bevel cutter Ø 250 mm, pocket cutter Ø 44 mm - 50 mm; combined power approximately 2kW, for producing left/right herringbone and easylox; including manuals, machine books, and flexible hoses up to the ceiling. Extremely precise, fully automatic machine!

Condition: excellent (used), Carbolite CWF 11/5 Chamber Furnace, 1100 °C Max. Temperature: 1100 °C With extraction system and table The upward-opening door keeps the hot surface away from the user. Gentle, self-closing door. Carbolite Gero 301 controller with ramp, setpoint, and process timer functions (CWF & CWF-B). Durable alumina support plates for the heating elements; robust door frame and base plate. High-quality fiber insulation with low thermal mass. Powerful heating elements on both sides ensure very good temperature homogeneity. Easy access to elements and the control system simplifies maintenance and servicing. Volume (liters): 5 Maximum temperature (°C): 1100 Heating time (min): 47 Ibodpepygpfofx Acpoc Continuous operating temperature (°C): 1000 Max. power (W): 2400 Holding power (W): 790 Thermocouple type: R Dimensions: Internal dimensions H x W x D (mm): 135 x 140 x 250 External dimensions H x W x D (mm): 585 x 375 x 485 External dimensions with door open H x W x D (mm): 800 x 375 x 485 Homogeneous temperature zone (±5°C) H x W x D (mm): 85 x 90 x 110 Weight (kg): 30 Connection: 230 V, 50 Hz, 2.4 kW Table: H x W x D (mm): 750 x 650 x 740 Extraction system: H x W x D (mm): 1020 x 720 x 540 More new and used items can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2010, with a permissible maximum speed of 24 km/h, with 2 seats, with a roof, with a windshield, with a charger, with 6x8 Volt batteries, with 4 cup holders, with 2 golf bag holders, with a storage compartment. Ijdpfxjz Sdk Ue Acpebc

Condition: used, Year of construction: 2014, equipped with new batteries, with 4 seats, with a charger, with a roof, with a windshield. Iodpjz Sdk Iofx Acpobc

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Iodpfx Acsz Rvftepjbc

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Isdpfxoz Rvfys Acpjbc Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, Year of construction: 2022, total length: 2,800 mm, Tugger Club Car Club Car Drive Electric Year built 2022 Ijdexpx Trepfx Acpobc

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: SN214289, functionality: fully functional, Completely overhauled, electrical system renewed including conversion to thyristor technology, as well as installation of new controllers! -Maximum temperature 260°C -Capacity 9000 liters -Nabertherm controller P 300 (9 programs, each with 40 segments) -HAS (High-Accuracy System), a highly accurate system for temperature control and documentation -Double door -Internal dimensions W x D x H 1500 x 3000 x 2000 mm -External dimensions W x D x H 2400 x 3860 x 2830 mm -Temperature limit selector -Thermocouple type K -Signal column -Access ramp, oven with bottom insulation, high temperature uniformity -Circulation rate 18000 m³/h -Power 93 kW -Documentation, CE -Electrically tested and with current DGUV test report The oven is calibrated according to DIN 17052 as of February 2025. This standard ensures that the temperature throughout the oven chamber is within defined tolerances. Suitable for applications such as heat treatment of metals or in additive manufacturing (3D printing) when processes that comply with standards are required. Ibedpfxoyxl Eps Acpec Inspection can be arranged at our warehouse at any time. We offer new and used industrial ovens, which we can also modify and expand according to customer requirements. Oven, furnaces, drying oven, industrial oven, drying cabinet, heat treatment oven, heat chamber, convection oven, chamber oven, heating oven, chamber convection oven, tempering oven, annealing oven, hardening oven.

Condition: used, Year of construction: 2010, 2010 Mahler HWE 4400/2000/4400 Tempering Bogie Hearth Furnace With Pro Therm (Siemens PLC) Control & Switchgear Usable Chamber Approx Dimensions L4,400 x W4,400 x H2,000mm. Holding Time At 600°C 3–4h. Temperature Uniformity (After 4h Hold) +/- 5K. Batch Weight 15t. Furnace Atmosphere Air. Material Of Parts Steel. Heating Electric. 8 Heating Control Zones. 7 Air Circulation Fans. Installed Heating Capacity Approx 1,680kW Bogie (Car) Approx Travel Speed 50mm/s. Bogie (Car) Approx Load Capacity 15t. Number Of Doors 2. Surface Losses Approx. 30kW. Exhaust Air Volume Flow Approx. 1,000–1,200 m³/h. Exhaust Air Temperature Approx. 250 °C. Max. Ambient Temperature 40 °C. Mains Voltage 3 x 400 V Control Voltage 230 V AC / 24 V DC. S/No. 241 09 (2010). Ibodpfxez Nh Dre Acpec

Condition: used, Year of construction: 2012, functionality: fully functional, Fully refurbished, 12 months warranty -Unit on base frame -Maximum temperature: 1300 °C -Oven chamber volume: 120 liters -Oven chamber: 500 x 500 x 500 mm (W x D x H) -Control cabinet separate -Eurotherm 3504 -Parallel swing door for opening in the hot state -Slot in the oven collar, bottom right (for retrofitting CO2 and N2 gas supply in a gas supply box, not included!) -Power: 15 kW -Connection: 400V 3/N/PE 50 Hz -Weight: 410 kg -Documentation, CE declaration Ibsdpfx Acjyn Emqepjc Oven, furnaces, industrial oven, muffle furnace, heat treatment oven, chamber furnace

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 618, functionality: fully functional, operating hours: 800 h, power: 80 kW (108.77 HP), input voltage: 400 V, input current: 250 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,200 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 4,900 mm, total width: 2,950 mm, total height: 2,900 mm, overall weight: 10,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, Condition: very good; the furnace has only been used for 100 batches. The delivery includes a loading electric cart and three charging baskets. Direct sale to end-users only. Ibodozz A Rrepfx Acpec W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Ibsdpfx Asz Dhm Ujcpsc

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Ibodpfxsz I Tt Ie Acpec Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: used, empty load weight: 8,900 kg, maximum load weight: 19,080 kg, overall weight: 27,980 kg, first registration: 11/2024, loading space length: 13,650 mm, loading space width: 2,550 mm, Year of construction: 2024, gearing type: other, driver cabin: other, * German vehicle * 1st owner * Condition: see photos * 3 loading platforms * 3 double-decker levels * Electric winch Iedpfjz A Tv Sex Acpjbc * Type: Hammer Winch * Pulling capacity: 4,500 kg * Capacity: 6 passenger cars * Vans, transporters * BPW axles * Air suspension * Disc brakes * Hydraulic outriggers * Platform dimensions: Front platform, top: 5.20 m, bottom: 5.40 m * Middle platform, top: 5.10 m, bottom: 5.60 m * Rear platform, top: 2.90 m + 1.20 m outrigger * Lower platform: 2.70 m + 1.70 m outrigger * Dual tires * Spare wheel holder + spare wheel * Cable winch with pulley * Trailer length (loading extension retracted): 13,650 mm * Trailer length (loading extension extended): 15,100 mm * 2 x steel loading ramps * Storage compartment * Wabco EBS * Water tank * Work lights * GVWR 27,980 kg * Unladen weight 8,900 kg * Payload 19,080 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer the possibility of inspecting and examining the goods, so that the buyer does not have any false ideas about the condition and suitability. Inspections and examinations are possible and expressly desired at any time after arranging an appointment. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, Labeling machine for top and bottom, with a ZODIAC printer for the top labels. Ibedpfx Asyaqttocpsc More photos and full specifications: /

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Ibsdpozuabzefx Acpjc Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: good (used), Year of construction: 1985, Miedema SB55 receiving hopper 200 cm bottom widthRoller cleaner with 6 stainless steel rollersSoil discharge conveyor and product discharge conveyor under the roller cleaner More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Ijdpfx Aez Rhd Iecpjbc See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery