Used Carousel for sale (152)

Condition: used, Year of construction: 1984, machine/vehicle number: 38419/38418/38412, This Hubtex roller rack system, electric, 3-part, type: TRPA, is being auctioned online as part of our industrial auction / machinery auction / insolvency auction HAMMER Übach-Palenberg – tools – shop fittings – forklifts – goods. Djdpoz Ndt Ujfx Akmoku You can find this and many other items on our platform.

Year of construction: 2016, condition: used, IRS Performance Test Carousel (2016), Cycle Time 60 mins, 118 Stations, Wifi Test, Vahle KSL 5/200 Hs Power Rail Dkodpsz I Scbofx Akmsu Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, MANFACTURER - PRO-ECO TYPE - PRECISION DOUBLE LOOP SLITTING LINE MATERIAL - GRAIN ORIENTED, NON-GRAIN ORIENTED, SILICON STEEL, COLD ROLLED STEEL SHEAR STRESS - 100,000 PSI - SILICON STEEL | 60,000 COLD ROLLED STEEL MAX YIELD STRESS - 80,000 PSI MIN YIELD STRESS - 30,000 PSI MAX COIL WEIGHT - 50,000 LBS ENTRY/EXIT MAX COIL WIDTH - 48" NOMIMAL (50" MAXIMUM) ENTRY/EXIT MIN COIL WIDTH - 8" ENTRY / 1" EXIT MAX COIL OD - 72" ENTRY / EXIT MIN COIL OD - 36" ENTRY / EXIT MAX STRIP THICKNESS - 0.025" IN - SILICON STEEL / 0.050" CRS MIN STRIP THICKNESS - 0.010" MAX CUTS - 32 LINE SPEED - 1200 FPM ELECTRICAL - 575 V, 3 PH, 60 CYCLE AIR SUPPLY - 80 PSI LINE DIRECTION - LEFT TO RIGHT Dksdpfx Aozk Nitskmeu MODE OF OPERATION - FULL LOOP DRIVE-SLIT, DOUBLE LOOP LINE COMPONENTS: COIL CAR MANDREL UNCOILER PEELER TABLE ENTRY PIT GUIDE TABLES INTERMEDIATE GUIDES FELT STAND BEFORE ENTRY SHEAR ENTRY SHEAR SIDE GUIDES SLITTING HEAD BUTECH SCRAP CHOPPERS EXIT TABLE PRESSURE & TENSION ROLL STAND EXIT SHEAR RECOILER WITH OVERARM SEPARATOR EXIT COIL CAR ALSO AVAILABLE: INTEGRATED PACKAGAING LINE, INCLUDING: EXIT TURNSTILE DOWNENDER WEIGHT SCALE UNDER SEMI-AUTOMATED BANDING LINE 5/8" STEEL BANDING PICK AND PLACE STACKER MAX CAPACITY 6000 LBS PER SLIT COIL ROTATING CAROUSEL EXIT CONVEYOR SEMI-AUTOMATIC STRETCH WRAPPING MACHINE WEIGHT STATION CONTROLS, HYDRAULICS AND ELECTRICS FOR LINE

Condition: used, Krauss-Maffei Door Foaming Carousel (Unused), Wet Box System, Fixture Dimensions Length x Width x Height 2300/950/200mm, Cycle Time 12 Seconds, 24 Foaming Fixtures, 2 x Mixing Heads, Mould Change Over/Storage System, ABBiRB 6700 Loading & Unloading Location: These lots are located in Porcia, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Djdez I S Dfjpfx Akmjku

Condition: good (used), functionality: fully functional, rotary table diameter: 1,000 mm, overall weight: 9,000 kg, grinding diameter: 1,000 mm, type of input current: three-phase, workpiece diameter (max.): 1,000 mm, table diameter: 1,000 mm, Hello, Dkjdpfozxpi Ajx Akmsu We have a 55kW carousel surface grinder with a 1000mm diameter table for sale. The grinder was purchased last year and comes with a complete set of accessories, including: - Siemens 55kW soft starter - 2 sets of grinding wheels - Original control cabinet - Sludge separator - Tank with pump We invite you to make a purchase.

Condition: excellent (used), functionality: fully functional, table width: 1,200 mm, table length: 2,500 mm, total length: 3,000 mm, total width: 2,100 mm, total height: 2,600 mm, overall weight: 700 kg, GLUE PRESS, rotary type, 3 sections | STROMAB ST 2500 | JBS MACHINERY | for wood! Rotary glue press for bonding tabletops – POWERFUL! Bonding length: 250 cm Rotary glue press STROMAB ST 2500 TECHNICAL SPECIFICATIONS: - Working length: 25000 mm - Working width: 1200 mm - Pneumatic clamping system - 3 gluing sections - 6 pneumatic clamps per section - 3 side clamps per section Dedszxyfbspfx Akmeku Machine dimensions: - Length: 300 cm - Width: 210 cm - Height: 260 cm - Weight: 700 kg WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS MACHINERY FOR WOODWORKING WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: good (used), Year of construction: 2006, functionality: limited functionality, 6-colour automatic screen printing machine, in good condition, little used. The machine has been dismantled due to lack of space. Djdpfjyv Uunex Akmeku

Condition: good (used), Year of construction: 2012, Haas VF-2SSYT Year of manufacture: 2012 Spindle speed: 12,000 RPM CT40 taper Tool Set Carousel (TSC) Dkodpjz Ihc Rjfx Akmou Workpiece Probe System (WPS) Renishaw probing system 4th axis, wired Video available!

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1000466, For sale is a professional direct injection molding machine from leading manufacturer DESMA, model S712. This machine is ideally suited for the efficient series production of footwear with directly molded soles (direct injection molding). Areas of application & uses: Ideal for TPU - 200T clamping force Footwear industry: Production of safety shoes, work shoes, hiking boots, as well as leisure and shaft boots. Materials: Processing of polyurethane (PU), TPU, or PU combinations for sole production. Process: Direct injection molding of the sole material onto the upper. Equipment & features: Djdpfoz H Ibwsx Akmeku Type / design: DESMA S712 rotary table machine / carousel machine with multiple stations. Molding head: Precision mixing head for accurate material metering and clean mixing. Control: Ergonomic control panel for central control of temperature, injection volume, and cycle times. Hydraulics & pneumatics: Robust clamping units for even pressure and burr-free sole edges. Safety: Integrated safety guards and light curtains according to industrial standards. Technical data (standard configuration): Manufacturer: DESMA Schuhmaschinen GmbH Model: S712 2003 expansion to 8 stations Application: Direct injection molding / sole injection molding Processable media: PU systems (polyol / isocyanate) Condition: Used, from current/former production

Condition: used, Year of construction: 2019, Base frame, carousel and swing arm of a Kuka KR 360 R2830 industrial robot with: - Axis 2 motor: Siemens 1FK7105-5AY81-1YY3-Z Dkodjx A D Rcopfx Akmou - Counterbalance GA16

Condition: ready for operation (used), A filling machine Ammann used in the dairy industry is available. Cup diameter: 95mm, cup height: 122mm. Including filling heads and various accessories. Documentation available. An on-site inspection is possible. Dsdpjxuvpzjfx Akmoku

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,822 h, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 4,900 W, number of axes: 4, This 4-axis Brother Speedio S700 X1 was manufactured in 2018. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 300 mm. The machine includes a table size of 1150 x 400 mm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the Brother Speedio S700 X1 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 400 mm • Spindle taper: 7/24 No. 30 (Big-Plus) Dual Contact / BT30 • Tool shank: MAS-BT / BBT30 Dedsz Hmn Njpfx Akmoku • Retention knob: MAS-P30T-2 (30°) • Tool changer: 21-tool carousel, total load capacity 35 kg • Tool change time (tool-to-tool): 0.8 s • Tool balance limit: 50 g • Rapid traverse rates: X 50 m/min, Y 50 m/min, Z 56 m/min • CNC control: CNC-C00 • Machine control indicated readings (recorded : Total operation time 17,822 h; Power-on time 33,212 h • Excluded equipment: External hydraulic unit Additional equipment • Hydraulic fixing table • Renishaw broken tool detector • Transformer / power supply unit • HAKUSAN chip conveyor • Emulsion mist separator SARA UC 1 SD

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, operating hours: 25,350 h, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 750 mm, number of slots in tool magazine: 120, number of spindles: 1, spindle nose: BT50, spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, Tool breakage option included Dsdpfx Akstqfk Nemsku 7-pallet carousel NC FANUC MF-M6

Condition: used, functionality: fully functional, Comec FGS-1T CAB Carousel Milling Machine Number of heads: 1 Dkjdoz H Id Sspfx Akmeu Milling motor power: 9.3 kW Table rotation motor power: 1.5 kW Min./max. working capacity: Ø110 / 800 mm Table rotation speed: 2 / 3.5 / 5 / 7.5 rpm

Year of construction: 1997, condition: used, SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L - 2+2 milling units (roughing and finishing) - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel Dkedpjhz Dlbefx Akmou - volt. 380/50 - S/N 73 - CE rules (year 1997)

Year of construction: 2011, condition: excellent (used), We are offering a used SMC Carousel mini load system from the manufacturer SSI Schäfer for sale. Technical specifications: High-performance modular shelving system for small goods (mini-load), 68 container racks with 12 levels per carousel Dkjdpfxsixl Sqo Akmju Containers 600x400x310mm, weight 30kg (not included) 1040 transport units per hour Approx. 3,264 storage locations The entire system (mini-load, flow rack, sorting system) consists of 4 carousels Length per carousel approx. 15 m, height approx. 4.5 m Total area approx. 320 m2 Maximum travel speed 0.6 m/s Location of the machine: 89-600 Chojnice/Poland The machine has been disassembled, is stored in a dry place, and is ready for shipment. If you are interested, please contact us.

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 678, functionality: fully functional, power: 1,400 kW (1,903.47 HP), input voltage: 380 V, input frequency: 5,060 Hz, type of input current: three-phase, table width: 400 mm, table length: 500 mm, total length: 1,700 mm, total width: 2,100 mm, total height: 1,500 mm, overall weight: 1,300 kg, Equipment: CE marking, safety light barrier, Transmatic CA 1000 – 6 Stations (late 2019 model) This is an automatic rotating carousel heat press in excellent condition – almost like new – with very few operating hours. The machine is fully operational and is still installed in our production line, maintained to professional factory standards. It offers high efficiency and productivity, capable of producing approximately 7,500 pieces per day with only 2 operators, making it ideal for companies focused on transfer printing and high-volume textile applications. Key Features: - Automatic 6-station rotating carousel system - Very low usage (limited production hours) - Plate dimensions (50cm x 40cm) Dkjdpfxozi Sm So Akmju - High production capacity (~7,500 pieces/day with 2 operators) - Precise control of temperature, pressure, and timing - Reliable and consistent output - No additional investment required – ready for immediate use.

Condition: good (used), Year of construction: 2005, functionality: fully functional, total height: 5,000 mm, Equipment: documentation/manual, safety light barrier, 7 Kardex vertical rotating storage units, models K1 to K7; 2 Kardex Shuttle vertical storage units, models K8 and K9; 6 Hänel Lean-Lift vertical storage units, models K10 to K15. K1 to K7 Kardex INDUSTRIEVER SYS 2512912-11, manufactured in the 1990s. Machine dimensions: height 5,400 x width 3,010 mm. 29 trays, usable dimensions: H 275mm x L 2,500mm x D 640 mm, load capacity 242 kg. Dsdpfxoz Dx Nts Akmsku K8 Kardex Shuttle 500-1650-863, year 1998, height 6,000 x width 1,980 x depth 2,975 mm, 29 trays, 450 kg/tray. K9 Kardex Shuttle 250-2850-635 NT, year 2003, height 5,028 x width 3,185 x depth 2,295 mm, 53 trays, 264 kg/tray. K10-K15 Hänel Lean-Lift 2450-825, year 2005, height 5,485 x 2,800 x 2,880 mm, 38 trays, 250 kg/tray. Plastic storage containers available.

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 36316, Carousel packaging and filling machine with three filling nozzles, designed for automated filling and sealing of cups. The machine ensures a complete process: - automatic cup feeding - filling using 3 filling nozzles Dkedpjzua Nrefx Akmou - placing and heat-sealing of the lid film - automatic lid placement - discharge of the finished, sealed product The machine is equipped with a product transfer device with a CLAMP/DN32 connection. Suitable for food production and other operations using cup filling.

Condition: excellent (used), Year of construction: 1987, Carousel lathe SCHIESS FRORIEP - DV DF DZ DKE 1 x set off 4 jaws 410 x 330 x 200 mm MACH-ID 6693 Make: SCHIESS FRORIEP Type: DV DF DZ DKE Year: 1987 set off 4 heavy duty jaws for SCHIESS FRORIEP DV DF DZ DKE Jaw width 90 mm Jaw height 75 mm Hole to hole jump length ways 125 mm Hole to hole jump in width 250 mm Length:1200mm Width:800mm Height:400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dkjdezc H Uxepfx Akmju

Condition: used, Rotary labeling machine, modernized in 2008 with a three-head self-adhesive labeling system. Manufacturer: PE Labellers Model: Universal 8T 3S 3E Capacity: up to 4000 - 7000 bottles/hour Dkedpfjztz Uasx Akmsu Carousel: 8-station Configuration: 2 x UNILOGO S7 heads for self-adhesive labels (e.g., front + back) 1 x COLLAMAT 6610 head for applying labels, e.g., neck labels Original technical documentation. Technical condition: used machine, condition as shown in the pictures.

Condition: used, Year of construction: 2000, KOSME Extra Fix 16T rotary labelling machine for labelling bottles or other oval containers. Manufacturer: KOSME Model: Extra FIX 16T 1056 |S3 E2 + SL Year of manufacture: 2000 Capacity: up to 9,000 bottles/h Carousel: 16 stations Equipped with three cold glue labelling heads (front, back, and neck) Original electrical documentation. Technical condition: used machine, condition as shown in the photos. Dodpfxjywchlo Akmsku

Condition: used, R80E MC is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England), manufactured in 1983 (serial number 112/83). Details of the R80E MC model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Year of manufacture: 1983 (112/83 – 112th machine in 1983 or December 1983). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80/R80E - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. Dkedpfxjyrn Rae Akmju - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, machine/vehicle number: 161/93, Rye 40 SM Speedmax is a heavy-duty, automatic rotary shaper / rotary profile milling machine. It is designed for high-volume production and profiling of solid wood and wood-based components. The British manufacturer, Rye Machinery Limited, was a renowned supplier of specialized machinery for the furniture and joinery industries. Electrical Specifications • Supply Volts: 380 V AC (three-phase power supply) • Control Volts: 110 / 240 V AC • Auxiliary Volts: F-215 / A15-180 • Frequency: 50 Hz • Phases: 3 • Full Load Current (F.L.C. Amps): 49.0 A • Machine No.: 161-93 • Wiring Diagram: A3-ER80/031 Technical and Functional Overview The Speedmax series of rotary shapers was engineered to minimize setup times and deliver maximum throughput for profiled components (e.g., chair parts, table tops, furniture fronts): • Rotary Table Design: Features a central, continuously rotating worktable. The operator can safely load and unload components on one side while the shaping heads machine the material on the opposite side. • Machining Heads: Equipped with pneumatic, heavy-duty shaping spindles that follow a master template to accurately reproduce complex, curved profiles. Dkodpfozfh Svjx Akmou • Safety & Enclosure: The machine includes a comprehensive acoustic enclosure and safety guarding. This protects the operator from chips, dust, and moving spindles while significantly reducing workshop noise. • Dust Extraction: Outfitted with dedicated extraction hoods integrated near the work heads for efficient chip removal.

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Dedpfxsyr Dawo Akmsku Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).