Used Carrier Trasicold Pte. Ltd Container for sale (12,166)

Condition: used, Year of construction: 2008, Technical details: length: 12192 mm width: 2438 mm height: 2896 mm weight: 4580 kg Total weight: 34000 kg charge: 29420 kg Cooling Container Internal dimensions: Bjdpfxjt Hzhao Ahmeln Length 11585mm Width 2290mm Height 2545mm Pallet spaces 23 *

Condition: good (used), Approx. 4-500 units, Isoco, Euro container / small load carrier RL-KLT 4147 - used: Price per unit, ex works: €2.50 (net)! Manufacturer: Isoco Type: RL-KLT 4147 Year of manufacture: unknown Dimensions (L x W x H): 400 x 300 x 147 mm Weight approx. 1.08 kg With drain holes Blue Manufactured according to VDA guideline 4500 Smooth container base with water drain holes Ideal for automated logistics processes Lid slots for matching top lids Integrated label areas for barcode labeling Temperature resistant from -20 °C to +100 °C New price approx. €5.10 Condition: good Bsdpfx Ahezv Ipvemsln Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: good (used), Approx. 4–500 units, Isoco, Euro container / small load carrier RL-KLT 6147 – used: Price per unit, ex works: €3.50 (net)! Manufacturer: Isoco Type: RL-KLT 6147 Year of manufacture: unknown Bsdpfezv Ip Aex Ahmsln Dimensions (L x W x H): 600 x 400 x 147 mm Weight: approx. 1.82 kg Smooth bottom With drain holes Blue Manufactured according to VDA standard 4500 Smooth container bottom with water drain holes Ideal for automated logistics processes Lid slots for matching top lids Integrated label areas for barcode labeling Temperature resistant from -20 °C to +100 °C New price: approx. €8.39 Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: new, power: 265 kW (360.30 HP), fuel type: diesel, tire size: 365/85 R 20, axle configuration: 4x4, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, gearing type: automatic, emission class: euro3, suspension: steel, Year of construction: 2026, Equipment: air conditioning, onboard computer, - 1 fuel tank - Halogen headlights - Multifunction steering wheel - PTO - Spare wheel holder - Sun visor LOOKING FOR A SPECIAL TRUCK? WE’VE GOT YOU COVERED! The Mercedes-Benz Arocs 1836 AK 4x4 Container Carrier is for sale and has been configured for professional transport operations where off-road mobility, flexibility and reliable container transport are essential. Powered by the proven Mercedes-Benz OM460 12.8-litre EURO-III engine producing 360 HP and 1,800 Nm of torque, this permanent 4x4 Arocs combines Mercedes PowerShift 3 with a heavy-duty all-wheel-drive chassis and specialised 20ft container carrier body. Bodpfjy R Davex Ahmsln The container platform has been engineered by Schaften Automotive to securely accommodate standard 20ft containers using dedicated container locking points and a robust chassis-mounted support structure. A 10-ton Dragon Winch installed at the front further increases operational versatility. This Arocs is available for worldwide export. QUICK HIGHLIGHTS ✔ Mercedes-Benz Arocs 1836 AK 4x4 ✔ Permanent All-Wheel Drive ✔ Mercedes-Benz OM460 12.8L EURO III Engine ✔ 360 HP (265 kW) ✔ 1,800 Nm Torque ✔ Mercedes PowerShift 3 ✔ PowerShift Advanced ✔ 20 ft Container Carrier Platform ✔ ISO-Style Container Twistlock System ✔ Schaften Automotive In-House Body Construction ✔ Dragon Winch – 10 Ton Capacity ✔ Heavy-Duty Off-Road Chassis ✔ Factory PTO ✔ Hot Climate Cooling Package ✔ Cyclone Dust Filtration ✔ N3G Off-Road Vehicle Classification ✔ Cross-Country 365/85 R20 Tyres ✔ Ready for Worldwide Export Built for 20 ft Container Transport Remote transport operations often require equipment that can perform far beyond conventional road conditions. The Mercedes-Benz Arocs 1836 AK combines a permanent 4x4 drivetrain with a purpose-built container carrier platform designed around the dimensions of a standard 20 ft ISO container. The body has been constructed by Schaften Automotive using a heavy-duty steel support structure integrated with the truck chassis. Dedicated twistlock positions secure the container at its corner castings, creating a stable connection between vehicle and load while still allowing the container to be removed when operational requirements change. This makes the truck particularly useful for operations where containers are used as mobile workshops, equipment stores, technical units, command centres, mobile hospitals or general cargo modules. Schaften Automotive In-House Container Body A container carrier used in demanding environments needs more than a basic flat platform. The body has been developed in-house by Schaften Automotive with durability, simplicity and practical field operation in mind. The structure is designed to distribute the container weight across the chassis while providing a robust mounting foundation for repeated commercial use. The integrated twistlock layout allows a standard 20 ft container to be positioned and secured directly onto the carrier platform. This creates a versatile vehicle that can work with different containerised solutions without permanently dedicating the chassis to one application. We even added a modified stair for easy entering the container if needed. By engineering and assembling the body in-house, Schaften Automotive combines proven Mercedes-Benz...

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Blsdpfx Aey Hlvwjhmen Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: like new (used), Year of construction: 2018, operating hours: 20 h, functionality: fully functional, 1 x Riggs Autopack Ltd depositor on mobile frame with pneumatic foot pedal. Has had very little use - LESS THAN 20 HOURS. Suitable for a variety of hot or cold products liquid or semi-liquid, including sauces, chutneys, jams, etc. Manufacturer - Riggs Autopack Ltd. Model - 1000 Series 3. Bljdpfxewpunbo Ahmon Filling range - 200ml to 2500ml piston & barrel set. Filling nozzle - 25mm diameter.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bledsynnlijpfx Ahmon Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. Bljdpfx Ahexuhw Domon ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) Bodpszt Nbzjfx Ahmsln - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 Bjdpfx Aovw I Nijhmjln 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase.

Condition: excellent (used), functionality: fully functional, REFRIGERATION UNIT: CARRIER Unit with Wilo circulation pumps + external condenser. Blsdpfx Aoz Aa Rxehmjn Dismantled by a professional refrigeration company. The unit does not contain glycol. The transport costs depend on the weight, volume and above all the distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require a telephone contact, so please ask about transport costs and other delivery methods to contact us by phone. Our contact details can be found in the seller's legal information. Payment in cash on delivery on site. We sell and export worldwide, thanks to our very large warehouse capacity we can also flexibly and quickly deliver larger quantities. Please contact us before purchasing. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: used, first registration: 04/2012, loading space length: 13,300 mm, loading space width: 2,430 mm, loading space height: 2,500 mm, loading space volume: 83 m³, Interchangeable platform, BDF refrigerated container, Carrier Bi-Temp. 1850 Internal number for inquiries: 0226098 * Refrigerated container * Refrigeration unit: Carrier - Vector 1850 * Bi-temperature * Partition * Closing bar on the left/right Bljdpfx Ahoyhiyzemen Dimensions of the cargo space/loading area * Cargo space length: 13,300 mm * Cargo space width: 2,430 mm * Cargo space height: 2,500 mm ----Price: €6,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, Polish, French and...? Typographical errors, errors and prior sale are subject to change.

Condition: used, maximum load weight: 35,460 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 07/2021, loading space length: 13,300 mm, loading space width: 2,430 mm, loading space height: 2,500 mm, loading space volume: 83 m³, Equipment: ABS, Kögel Port 45 BDF Multi Chassis Reefer Container Carrier Bi-Temp. Internal No. for inquiries: 0226131 * Overall condition: very good * ABS * First registration: 07/2021 * Multi Chassis * 3-axle, air-suspended * BPW axles * Drum brakes Reefer container Tonglee Internal No. for inquiries: 0226132 * Refrigeration unit: Carrier - Vector * Bi-temperature * Partition on the left/right Dimensions of cargo space/loading area * Length of cargo space: 13,300 mm * Width of cargo space: 2,430 mm * Height of cargo space: 2,500 mm Tires: * 1st axle: 385 / 55 R22.5 30% air-suspended * 2nd axle: 385 / 55 R22.5 30% air-suspended * 3rd axle: 385 / 55 R22.5 30% air-suspended ----Price: ,- Euro + 19% VAT For further questions, you can reach us at the following telephone numbers: Bljdezch Hiepfx Ahmen We speak: German, English, Polish, French, and…? Typographical errors, errors and prior sale are subject to change.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Bjdszp H R Eepfx Ahmeln Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: good (used), functionality: fully functional, Used container system, dry, sealed, in good condition - Consisting of 8 x 30-foot containers Dimensions per container: Length: 9.15m Width: 2.50m External height: 2.96m Internal height: 2.70m Area: approx. 177m² Insulation: Roof: 100mm Wall: 60mm Floor: 60mm Equipment: - 1x standard entrance door - 1x double-leaf entrance door - extra high entrance - PVC flooring - Plastic windows with insulated glazing and tilt/turn function - Blinds - Electric heating - Lighting - Sealing strips - Wall cladding - Ceiling cladding - Threshold plates - Container corner fittings Bljdszt Sa Tspfx Ahmon - Documentation available The system can be dismantled, loaded, and transported for an additional fee. This system is offered for sale. The land cannot be rented or purchased. Only serious and legitimate inquiries, including name, email address, and telephone number, will be answered.

Year of construction: 2017, condition: used, REF: MM6447 1 x Camline Palletising Systems Ltd cartesian automated palletiser. The palletiser automates the stacking process of products and goods that can otherwise be labour intensive and expensive, putting undue stress on workers. Cartesian or ‘Pick and Place’ palletisers are characterised by the structural beams and axes which are used to ‘pick and place’ the items. They are very flexible machines and can move products in three directions, thus being used to create complex pallet patterns. Typically, one or two (sometimes more) products are collated on an infeed conveyor and collected with a gripping device, which then places them on to the pallet. Manufacturer – Camline Palletising Systems Ltd. Model – Compact Palletising System. Date of manufacture – 2017. Bjdpfx Ahezbkl Ssmeln Entry via conveyor and exit via manual removal of the pallet. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 32 Amps. Air pressure - 6 Bar. Overall dimensions - 2m wide x 2.7m deep x 4.4m high (approx.).

Year of construction: 2001, condition: excellent (used), functionality: fully functional, CNC mandrel bending machine including O-ring assembly Fully automatic, high-precision production cell for the series production of pipework systems (e.g. brake, fuel or hydraulic lines), including a robot, feeding system, dual O-ring assembly and high-quality testing technology. The system combines the legendary precision of a MIIC CNC bending machine with the flexibility of robot-assisted handling and integrated quality assurance. The system is ideal for suppliers to the automotive industry, mechanical engineering or fluid technology sectors. Technical data 1. CNC mandrel bending machine Manufacturer: MIIC (Chubu MIIC Co., Ltd., Japan) Type: EMO-20R-S Year of manufacture: 2001 Control system: Multi-axis CNC control with operator panel Special features: Collet head movable in X / Y / Z, equipped with 3 bending planes for highly complex three-dimensional shapes without tool changes. 2. Loading and unloading robot Manufacturer: Motoman (Yaskawa) Model: ERCS-UP6-A00 Year of manufacture: 2000 Robot control: XRC including original teach-in terminal (handheld control unit) 3. Automatic O-ring assembly stations Manufacturer: ASM HASEMO GmbH Type: MOSA-800 / MOSA-1100 Year of manufacture: 2010 (high-quality upgrade/retrofit) Function: 2 O-ring assembly stations including a complete bulk material feed system (vibration hoppers/spiral conveyors) for twist-free and gentle external assembly of sealing rings. 4. Quality assurance & peripherals Measuring computer / leak tester: Innomatec, type: LT-C602 (for direct in-line testing) Bjdpfozz Hmqsx Ahmjln Blow-off station: Integrated for cleaning

Year of construction: 2020, operating hours: 2 h, condition: reconditioned (used), functionality: unexamined, For sale is a complete PET bottle recycling washing plant for processing used PET bottles into clean PET flakes. The plant is designed for a production capacity of approximately 1,000 kg/h and is suitable for recycling companies, plastics processors, and companies that want to industrially sort, shred, wash, and dry PET bottles. According to the documentation, the water-contacting components are made of SUS304 / stainless steel 304. Technical Specifications Feature Specification Plant type PET bottle recycling and washing plant Capacity approx. 1,000 kg/h Raw material used PET bottles End product cleaned PET flakes Residual moisture ≤ 1% Flake size approx. 14 mm, adjustable Proportion 8–12 mm ≥ 90% Fine granulate ≤ 3% Bedpfszhifisx Ahmsln Powder content ≤ 5% Installed power 238 kW Power consumption approx. 153 kW/h Water requirement approx. 6–8 t/h, recyclable Working area approx. 59 × 4 × 6 m / approx. 208 m² Personnel requirement approx. 9 people Plant scope The line consists of the central machines for the complete recycling process: Conveyor belts Bale opener / De-Baler Label remover Manual sorting station Metal detector Plastic mill / Crusher Screw conveyor Float-sink washing systems High-speed dewatering machines Hot steam washer High-speed friction washer Zig-Zag label blower for label and dust separation Storage or product silo Electrical control cabinet Description This PET washing plant is designed for the industrial recycling process of post-consumer PET bottles. The process begins with the feeding of the compressed bottle bales, followed by bale opening, label removal, manual sorting, and metal detection. Subsequently, the bottles are shredded and cleaned in several washing, friction, and dewatering stages. The plant features a hot steam washer that operates with water at approximately 90–95 °C and, together with cleaning agents, removes oil, dirt, adhesives, and label residues. The flake stream is further cleaned via float-sink washers to separate caps, label residues, and other foreign substances. The final drying takes place via high-speed dewatering units. The result is clean PET flakes with a residual moisture content of a maximum of 1%, suitable for further processing, e.g., granulation, extrusion, or recycling into plastic products.

Condition: used, Year of construction: 1989, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 5399 195, type of input current: three-phase, total length: 6,830 mm, total height: 1,490 mm, total width: 1,400 mm, feed length X-axis: 80 mm, feed length Y-axis: 20 mm, feed length Z-axis: 80 mm, input voltage: 400 V, overall weight: 2,100 kg, compressed air connection: 60 bar, air demand: 60 m³/h, input current: 63 A, year of last overhaul: 2020, sheet thickness aluminum (max.): 40 mm, air pressure: 60 bar, power: 6 kW (8.16 HP), product height (max.): 100 mm, product height (min.): 70 mm, product length (max.): 135 mm, product length (min.): 110 mm, SL80 Bradman Machine – Used & Fully Functional Bjdpfszx Ehzex Ahmeln SL80 Bradman machine for sale. The machine is used but in good working condition and is fully functional. It has been well maintained and is ready for use. Selling due to no longer being required. Buyer is welcome to inspect the machine before purchase. Please get in touch for more information or additional photos.

Condition: good (used), functionality: fully functional, Used container system, dry, sealed, clean - Manufacturer: ALHO - Consisting of 16 + 2 x 20-foot containers = approx. 270 m² - Current use: temporary school - Available from July 31, 2026 Dimensions per container: Length: 6.00 m Width: 2.50 m External height: 2.95 m Internal height: 2.50 m Insulation: Wall: 80 mm Floor: 100 mm Ceiling: 80 mm Equipment: - Central staircase consisting of 2 x 20 ft containers - 4 classrooms, each consisting of 4 x 20 ft containers Bodpfxozhgt Re Ahmsln - 2 emergency staircases for the upper floor - Plastic windows with insulated glazing and tilt-and-turn function - Blinds - Electric heating - Sealing strips - Wall cladding - Ceiling cladding - Threshold plates - Container clamps - Acoustic elements Manufacturer's documentation is available. Loading and transport can be arranged. Only serious and legitimate inquiries will be answered, and these must include: name, email address, and telephone number.

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, load capacity: 8,000 kg, lifting height: 7,000 mm, battery voltage: 380 V, DGUV certified until: 06/2030, overall weight: 10,000 kg, total height: 9,900 mm, Equipment: CE marking, For sale: a two-rail gantry crane, manufactured in 2025 and with only 5 months of service. In impeccable condition, fully operational, and available for viewing in operation before purchase. Bledjzrmigepfx Ahmjn Key features: Capacity: 8 tons using two independent 4-ton hoists on the main beam Span: 8 m Lifting height: 7 m Overhangs: 1.75 m on each side Overall height: 9.9 m Equipment weight: approx. 10 tons Power supply: 380 V three-phase Travel speed: 20 m/min Manufacturer: Henan Dafang Heavy Machine Co., MHE series Includes: electrical panel, cable reels, control unit, and access ladder Complete documentation: EUROCERT certificates No. 10.16.2627 (gantry crane) and No. 10.16.2628 (electric hoist) in accordance with Machinery Directive 2006/42/EC, valid until 2030, plus manufacturing drawings and declaration of conformity. The dual hoist configuration allows for synchronized handling of long loads, making it ideal for handling pipes and drilling columns, stone processing, precast concrete, and metal structure workshops. Located in Malaga. For sale due to the cessation of the activity for which it was acquired. Price: €26,000 (excluding VAT). Option to sell with dismantling and loading handled by the buyer. Operational video available upon request. If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: good (used), Equipment: air conditioning, Used container unit, dry, sealed, clean - Manufacturer: Algeco - Year of manufacture: 2018 - Combination of office (27 m²), storage (54 m²) and terrace (54 m²) - Former rental station - Available immediately Dimensions per container: 6x Length: 6.00 m Width: 3.00 m External height: 2.95 m Internal height: 2.50 m 1x Length: 9.00 m Width: 3.00 m External height: 2.95 m Internal height: 2.50 m Equipment: - Air conditioning - Plastic windows with insulated glazing and tilt-and-turn function - Blinds - Parapet - Double-leaf door - Entrance door with glass insert - Electric heating - Sealing strips - Wall paneling - Ceiling paneling - Threshold plates - Container clamps Bledpfx Aez Armrohmon Manufacturer's documentation is available. Loading and transport can be arranged. Only serious and legitimate inquiries including the following information will be answered: name, email address and telephone number.

Year of construction: 2012, condition: used, Multihead Weigher – Ishida Co., Ltd. DACS 030-SB/WP-I-N Manufacturer: Ishida Co., Ltd. Model: DACS 030-SB/WP-I-N Year of manufacture: 2012 Machine type: Multihead checkweigher / weighing system Description The Ishida DACS 030-SB/WP-I-N is a high-precision automatic checkweigher designed for dynamic inline weighing in food production and packaging lines. The machine ensures that products meet preset weight specifications while maintaining high throughput and accuracy. Ishida weighing systems are widely used in the food industry due to their reliability, hygienic design, and precise weighing technology. Technical Specifications - Manufacturer: Ishida Co., Ltd. - Model: DACS 030-SB/WP-I-N - Year: 2012 - Machine type: Automatic checkweigher - Application: Inline weight control - Operation: Fully automatic - Construction: Stainless steel hygienic design - Control: Digital / touchscreen interface Bsdpeyt Rbqefx Ahmjln Key Features - High-precision dynamic weighing system - Reliable operation for continuous production lines - Hygienic stainless steel design suitable for food processing - Easy integration into packaging lines - Automatic rejection of products outside tolerance (depending on configuration) Applications - Food packaging lines - Meat, poultry, and fish processing - Snack and convenience food packaging - Quality control in automated production lines Condition Used More photos and full specifications: /

Condition: used, working direction: left-right Bljdpfoz Ia Swox Ahmjn

Condition: excellent (used), Year of construction: 2020, Baling press, MACFAB, – used –: Price ex works: €13,500.00 (net)! Manufacturer: MACFAB Systems Ltd Type: BMF650 Auto HT RAL - MM9.8 Year of manufacture: 01/2020 Serial number: MF J144 Weight: 1770 kg Operating hours: approx. 16h Automatic operation & "Bale ready" indicator Horizontal door that pivots to the side Surface / Color: RAL6018 Feed opening: 1,500x880x769mm (WxHxD) Dimensions, press: 2,100x1,524x3,217mm (WxDxH) Bledpszxciijfx Ahmen Former new price: €18,921.00 Condition: The machine was only used once for testing purposes. Available: immediately Location: 72336 Balingen