Used Cee Plug Ex Protected for sale (18,499)

Condition: good (used), CEE plug Ppsdpfxsb A Sf Io Al Ssr -4-pin connector -16 A -Type: GHG 531 7406 V 0 -EX Protected -Weight: 0.5 kg

Condition: good (used), Transformer, current transformer, explosion-proof lamp Podpfx Ajiv A Ecol Sjpr -Manufacturer: Steel, voltage converter with transport frame -Type: 230 V 24 V see photo nameplate -Protection class: EEx T4 -Accessories: incl. 24V lamp -Dimensions: 740/370/H1020 mm -Weight: 27 kg

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Podpfxsihb Ams Al Sjpr Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: excellent (used), EX protected forklift battery 24V + charger Explosion-proof battery according to 2014/34/EU II 2G Ex eb IIC T6 Gb II 2D Ex tb IIIC T80°C Db BVS 03 ATEX E 266 X Manufacturer: GNB Industrial Power Model: Marathon Classic Designation: EX 24V 3 EPzS 270 Flex Plus Aqua Type: 3 EPzS 0270 SZC Trough no. 57534134010 Rated voltage: 24 Volt Capacity: 270 Ah Number of cells: 12 Weight: 234 kg Acid volume: 34 liters Delivery date: 24.04.2019 Charger Still HFX 24V - 55 A Benning E230G24/55B-HFX Ppodst Sq Erepfx Al Sjr 24 V 55 A Applications The traction batteries in the EPzS series are ideal energy storage devices for industrial trucks, cleaning machines, road vehicles, tractors and other electric vehicles with high energy requirements and heavy cyclical loads. Technical features > Robust lead-acid technology with liquid electrolyte > Proven tubular plate technology for a long service life > Fully insulated terminal screws and plugs > DIN and BS sizes according to IEC 60254-2 > Manufactured according to DIN EN ISO 9001 > Environmental management according to DIN EN ISO 14001 > Fully recyclable Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, mileage: 98,700 km, power: 165 kW (224.34 HP), fuel type: hybrid, gearing type: automatic, first registration: 12/2022, next inspection (TÜV): 12/2026, emission class: euro6, color: blue, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, Special equipment: Driving Assistance Package, metallic paint, electrically operated panoramic sliding roof Ppodpfxsxumnhe Al Sor Other equipment: Acoustic pedestrian protection (external sound, AVAS), front ambient lighting (LED), traction control (ASR), Ford audio navigation system with AppLink, electrically folding exterior mirrors, electrically adjustable and heated exterior mirrors, body styling package, onboard computer, fabric headliner (dark), black roof rails, body-colored roof spoiler, dual exhaust tailpipes, Eco display for fuel-efficient driving (EcoCoach), electric motor 97 kW (hybrid drive), Driver Assistance System: Emergency Brake Assist, Driver Assistance System: Post-Collision System, Driver Assistance System: Pre-Collision System, Driver Assistance System: Lane Keeping Assist, electric windows front and rear with comfort closing, FordPass Connect incl. eCall, ST-design floor mats, luggage compartment cover/roller blind, automatic transmission - ECVT, LED tail lights, induction charging tray for mobile devices, interior mirror with auto-dimming, Intelligent Protection System (IPS), ISOFIX child seat mounts, body: 5 doors, electronic child safety lock, 2-zone automatic climate control, electric tailgate (sensor-controlled opening), digital instrument cluster 12.3-inch display, front headrests 4-way adjustable, charging cable with Schuko plug, steering wheel (sport/leather, ST), steering column adjustable in height and reach, alloy wheels, rear center armrest, engine 2.5 liters - 112 kW (system output: 165 kW) hybrid, My Key (2 programmable vehicle keys), electric parking brake with auto-hold function, front and rear parking sensors, wheelbase 2710 mm, tire repair kit, tire pressure monitoring system, split folding rear seat backrest, foldable rear seat backrest, low-emission according to Euro 6d emissions standard, shift/select lever knob aluminum, black window frames, LED headlights, headlights with switch-off delay, headlight assistant with day/night sensor, driver's seat electrically adjustable (10-way), front passenger seat adjustable (8-way), seat covers/upholstery: synthetic leather / fabric in suede look, front seat heating, left sun visor with illuminated mirror, right sun visor with illuminated mirror, special version 2, sports suspension, sports seats, rear privacy glass (tinted)

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, feed rate X-axis: 7 m/min, workpiece weight (max.): 1,000 kg, working width: 2,500 mm, volume flow: 8,000 m³/h, year of last overhaul: 2025, overall weight: 3,200 kg, type of input current: three-phase, passage height: 210 mm, total height: 2,350 mm, total length: 2,450 mm, total width: 3,500 mm, working height: 950 mm, Ceetec DuoFlex Spray – The Coating Machine for Joiners, Furniture Makers, CLT and Glulam BSH Suppliers, and much more cases. Wherever a solid, straightforward, yet exceptionally well-equipped machine is needed, the DuoFlex Spray surface spray machine comes into play. Spraying doesn’t have to be complicated – not when you have a robust, long-lasting machine (made in Denmark, electronics from Germany – Beckhoff and others) that puts the operator at the center of it all. Everything is intuitive and easy to use, yet you get features you’ll struggle to find elsewhere – or only in significantly more expensive machines. Here are some hard facts about the DuoFlex Spray: 1. Color changes in just 3–5 minutes 2. System volume only 2.5–3L of paint/lacquer 3. Suitable for both solvent-based and water-based coatings 4. Two fully separated circuits – ideal for solvent/water or clear/topcoat separation 5. Maximum reproducibility – thanks to smart programming that stores all key parameters automatically 6. Quick to learn – after just 4–6 hours of training, even a baker can spray better than a manual sprayer with 10 years’ experience 7. Modular expandability – drying systems, sanding units, preheating, robotic integration – all from a single source 8. Service that speaks your language – our owner spent nearly 10 years as a coatings manager and brings hands-on expertise to your shop. The machines are extremely durable, and if anything should go wrong, we maintain well-stocked spare parts warehouses in both Germany and Denmark Processing dimensions for the DuoFlex Spray: 1. Standard: 1,300 mm width × 200 mm height 2. Larger: 1,800 mm width × 200 mm height 3. Up to: 3,200 mm width × 330 mm height Length: from 250 mm up to virtually unlimited. If you want to coat CLT ceiling panels 16, 18, or 20 meters long, we’ll simply build the right handling system for you. Sound interesting? Would you like to try the machine in our technical center? Do you have specific requirements and wonder if we can deliver? Then I’ll be happy to help you personally. Podpfx Alsffc Tys Sepr Best regards, Martin Bruhn Owner, Bruhn Lackieranlagen // Exclusive Sales Partner of Ceetec A/S – Middelfart, Denmark

Condition: used, total length: 4,000 mm, total width: 1,200 mm, total height: 1,500 mm, Empty weight: 4.000 kg Price: On request - Documentation available: No - CE certificate present: No - Transport dimensions: 4000mm x 1200mm x 1500mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Pjdpfxjy Ia T Ho Al Sjpr Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2018, REF: MM5727 1 x Zumex Food Engineering juice extraction and flitration system with elevator. Manufactured completely in stainless steel. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Serial number - 454293.  ✅ Date of manufacture - 2018. Pjdpfxst Uircj Al Sspr ✅ Hopper capacity - 40 kg.  Performance Specification: Sizes     Head Unit     Oranges/MIN     KG/H     L/MIN     L/H 9-10-11     Kit 9     150,35     902,4      6,01     360,84 5-6-7-8     Kit 8     133,68     1145,4     7 ,64     458,22 2-3-4     Kit 7     116,94     2338,8     1 5,59     935,53 Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5m L x 1m W x 2.2m H. CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: excellent (used), For sale: a line pump from the renowned German manufacturer KSB, model ETALINE ETL 032-032-200, complete with Siemens motor. This unit is intended for use in industrial installations, heating and cooling systems, as well as water circuit applications. TECHNICAL DATA OF THE PUMP Manufacturer: KSB Model: ETALINE ETL 032-032-200 Flow rate: Q 4.0 m³/h Head: H 12 m Impeller diameter: 191 mm Rotational speed: 1459 rpm Year of manufacture: 2021 Flange connections MOTOR Manufacturer: Siemens Power: 0.55 kW Voltage: 400 V, 50 Hz Speed: approx. 1440 rpm Efficiency class: IE3 Design: ATEX Ex II 2G Protection: PTC CONDITION Ppjdpfx Ajywu Haol Sjr Very good condition Complete unit Minor visible signs of storage Technically fully functional APPLICATIONS Industrial process installations HVAC systems Water and liquid circulation Manufacturing plants Explosion hazard zones

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Ppjdpfx Alonxi H Ue Ssr Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Ppsdpfx Aljxbd U Es Ser

Condition: used, Year of construction: 1960, centre distance 1200 mm 550 weight of the machine ca. 2,5 t Ppjdjx U A Igepfx Al Sjr

Year of construction: 2005, condition: used, tool adaptor 50 mm driven tools 5 Stück 4 Stück +++++ Ppjdegtyhrspfx Al Sor Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 80 V, total height: 880 mm, total length: 2,460 mm, total width: 735 mm, Tested forklift battery for your forklift - 80V 6PZS 930Ah - special tray + 1 year warranty + Including aquamatic system + Including end discharge device & REMA 320 connector (other connectors available on request) + Capacity: minimum 90–100% (C5 capacity protocol will be supplied upon delivery) + Year of delivery: 2024 Dimensions: Length: 2,460 mm Width: 735 mm Height: 880 mm Pedpswzvw Iefx Al Sspr Weight: approx. 2,300 kg Suitable for the following models and others: Still MX-X Crown TSP 7000 Bulmor EQN 40-50 Caterpillar EP50N Daewoo B40 X Dimos BMS 30/89 Doosan B45X-5 Doosan B50X-5 Hubtex MQ 45 Hubtex MQ 70 Hubtex MSU 40 Hyundai 50B-9 Hyundai B40-9 Steinbock-Boss WA 15 Kalmar EC 4-500 Kalmar ECD 50-6 Kalmar ECD 55-6 Kalmar ECE 50-6 Kalmar ECF 70-6 Kalmar ECG 55-6 Common battery sizes available; please enquire. Transport possible.

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Ppsdpod Nw Ttefx Al Ssr Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: new, Year of construction: 2024, New machine Turning diameter over bed 500 mm Turning diameter over slide 270 mm Turning diameter in gap 700 mm Pedpfx Alewu Du Is Sopr Bed width 340 mm Dimensions between centres 1500 mm Height of centres 250 mm Speed ​​rpm 22 – 2000 Mounting main spindle Bayonet 6 Spindle bore 52 mm Including 3-jaw chuck, 4-jaw chuck, rapid toolpost with 4 inserts, rapid feed, collant equioment, 2 axes digital read out, fixed steady, traveling steady, set of change gears and instruction manual

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Pedpet Hw D Defx Al Sepr Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: ready for operation (used), Vibratory finishing system, Slide Grinding Machine,Circular trough vibratory finishing machine, Used Machine Ppjdpfsxdfabex Al Ser Manufacturer: Gránit-Ex Kft Type: FM-10, 1500 x 1500 Year: 2020 Weight: 600 kg d: 550 mm, Circumference: 1670 mm D: 1350 mm, Circumference: 3650 mm Torus: 350 mm

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. Psdohwhf Ajpfx Al Sopr With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Psdpfxehwhfqj Al Sspr Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2005, total length: 9,060 mm, total width: 2,520 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,450 mm, Year of construction: 2005, Equipment: ABS, = Additional Features and Equipment = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Notes = Well-maintained 2005 Van Hool 20FT tipping chassis, SAF axles with disc brakes (Intradisc), ABS, 2 x lift axle, ADR (EXII, EXIII, FL, AT), tiltable up to 20 degrees, 24V, unladen weight: 5,200 kg, gross vehicle weight: 39,000 kg, 385/65-R22.5 tyres (L: 8/17/8mm; R: 7/10/7mm), Dutch registration. = Further Information = Axle Configuration Tyre size: 385/65-R22.5 Axle brand: SAF INTRADISC Ppedevt A Hnspfx Al Sjr Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 45% Rear axle 2: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 100%; Tyre tread right: 60% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 45% Weights Unladen weight: 5,200 kg Payload: 33,800 kg Gross vehicle weight: 39,000 kg Functional Body manufacturer: Van Hool 3B2013 Condition Technical condition: very good Optical condition: very good Identification Registration number: OH-71-VY Further Information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2005, total length: 9,060 mm, total width: 2,520 mm, suspension: air, tire size: 385/65 R22.5, wheelbase: 7,450 mm, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - ADR - EBS - Lift axle - Air suspension - Disc brakes = Notes = Attractive 2005 Van Hool 20FT tipping chassis, SAF axles with disc brakes (Intradisc), ABS, 2 x lift axles, ADR (EXII, EXIII, FL, AT), tiltable up to 20 degrees, 24V, unladen weight: 5,200 kg, max. gross weight: 39,000 kg, 385/65-R22.5 tires (L: 8/8/7 mm; R: 8/7/6 mm), Dutch registration. = Further information = Axle configuration Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire size: 385/65 R22.5; Lift axle; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Tire size: 385/65 R22.5; Lift axle; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 45% Rear axle 3: Tire size: 385/65 R22.5; Max. axle load: 9,000 kg; Tire tread left: 45%; Tire tread right: 40% Weights Unladen weight: 5,200 kg Payload: 33,800 kg Gross vehicle weight: 39,000 kg Functional Body brand: Van Hool 3B2013 Condition Technical condition: very good Ppjdpfxsy H Hd Ae Al Ser Visual condition: very good Identification Registration number: OH-68-VY Further information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2011, total length: 9,360 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22.5, wheelbase: 7,450 mm, Year of construction: 2011, Equipment: ABS, = Additional options and accessories = - ADR - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Remarks = Nice 2011 Van Hool 20FT 66° tipping chassis, SAF axles with disc brakes (Intradisc), ABS/EBS, 2 x lift axle, ADR (EXII, EXIII, FL, OX AT) valid until 29.06.2025, tiltable up to 66 degrees, additional rear support legs, 380 V, unladen weight: 4,700 kg, maximum mass: 39,000 kg, 385/65-R22.5 tires (left: 7/8/10mm; right: 8/7/10mm), Dutch registration with valid technical inspection until 29.06.2025 = Further information = Axle configuration Axle make: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire size: 385/65 R22.5; lift axle; max. axle load: 9,000 kg; left tire tread: 45%; right tire tread: 50% Rear axle 2: Tire size: 385/65 R22.5; lift axle; max. axle load: 9,000 kg; left tire tread: 50%; right tire tread: 45% Rear axle 3: Tire size: 385/65 R22.5; max. axle load: 9,000 kg; left tire tread: 65%; right tire tread: 65% Weights Unladen weight: 4,700 kg Payload: 34,300 kg Gross vehicle weight: 39,000 kg Functionality Body make: Van Hool 3B2013 Condition Technical condition: very good Optical condition: very good Identification Registration number: OL-87-JL Ppsdpsv Uxvnjfx Al Sor

Condition: good (used), mileage: 136,000 km, Year of construction: 2022, Land Rover Discovery Sport P300E 1.5 R-Dynamic 2022 Automatic / Meridan Sound / Plug-in Hybrid Video can be sent via Whatsapp. Ongoing stock, see our website. Ppjdpfx Aloy Hrqzo Sor Prices are ex Nuland. Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees. (see our general terms and conditions) For a viewing and/or test drive you can make a non-binding appointment. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, functionality: fully functional, machine/vehicle number: NM0KCXTP6KSU99703, mileage: 205 km, power: 368 kW (500.34 HP), first registration: 10/2025, fuel type: diesel, empty load weight: 8,579 kg, maximum load weight: 9,421 kg, overall weight: 18,000 kg, tire size: V: 385/55 R22,5 - A:315/70 R22,5, tire condition: 100 %, wheelbase: 3,600 mm, next inspection (TÜV): 12/2026, fuel: diesel, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 16, emission class: euro6, number of beds: 2, total length: 3,600 mm, total width: 2,540 mm, total height: 3,916 mm, Year of construction: 2025, operating hours: 15 h, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, fridge, full service history, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, start-stop system, tachograph, tire pressure monitoring, We offer a rental scheme with a minimum duration of 36 months, ensuring you long-term stability and continuity. The monthly rental price is €2,000 excluding VAT, providing a transparent and clear cost structure. Ppsdpfxsypatno Al Sjr - An advance payment of €7,500 is required at the start. This gives both parties the necessary security and forms a solid basis for smooth cooperation. - In addition, a maintenance contract is included, so you do not have to worry about service or additional costs. You benefit from a worry-free and professional solution, with quality and reliability as central values.