Used Cefla Easy 2000 for sale (12,604)

Condition: good (used), Year of construction: 2004, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2004 Product number: 04177/1 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns -1 ÷ 4 bar Working air pressure for opening the guns - 5 ÷ 6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min TRANSPORTER TRC2500 Producer: CEFLA Type: TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter, 2500 mm long and 1250 mm working width, with two speed ranges: low from 1.7–11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min. Main engine power 1.72 kW. OVEN UNISON 12 M Producer: UNISON Type: UNI-LEVEL 6/12 Year of production: 2010 Length 13500 mm Width 2600 mm Height 2510 mm Weight 6950 kg Power supply 3 x 400 VAC, Hz Air pressure 0.6 Mpa The shelf dryer is used for hot air drying of painted elements in the automatic varnish machine that applies paint coatings using the spray method. The drying room has 6 shelves - each 12.2 meters long. The rated speed of the main conveyor is 4 m / min. TRANSPORTER MCRS PRN 6,3 with belt transformer (II) Producer: MCRS Nlodszumxmspfx Aa Rjf Type: PRN-6.3 Year of production: 2018 Product number: 18014/5

Condition: good (used), Year of construction: 2005, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2005 Product number: 05026/4 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns - 1÷4 bar Working air pressure for opening the guns - 5÷6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min ROLLER TRANSPORTER type PRN-6.3 Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/1 Working height - 920 mm +/- 50 Roll working width -1610 mm Total width - 1700 mm Roll diameter - 53 mm Total length - 6300 Movement speed - 20 m / min Weight - 320 kg Power supply - 400V 50Hz 6 bar TRANSPORTER PPR1050 Producer: CEFLA Type: PPR 1050+ TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter with a length of 1050 mm and a working width of 1250 mm with two speed ranges: low from 1.7-11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min (for the time of loading into the dryer carousel). Main engine power 1.72 kW. TRANSPORTER TRC2000 Producer: CEFLA Type: TRC 2000/125 Year of production: 2005 Product number: 05026/1 Transporter with a length of 2000 mm and a working width of 1250 mm. The transporter is driven by a 0.25 kW engine and reaches a speed of 1.7-10.7 m / min. CEFLA OVEN (drying room) Producer: CEFLA Year of production: 2005 Machine for the complete or partial drying of paint products that are applied to the parts to be treated, such as linear panels of all kinds. Vertical two-zone platform oven with warm air drying. Evaporation fan flow - 2x8000 m3 / h Drying fan flow - 8000 m3 / h Installed thermal power - 130,000 Kcal / h Total installed power - 17 kW Compressed air consumption - 92 Nl / min Platform length - 3500 mm Overall dimensions - 5192x4120x4524 mm Nljdpfx Aezumvxea Rsf TRANSPORTER TRC3500 Producer: CEFLA Type: TRC 3500 / 2V / 125 Year of production: 2005 Product number: 05026/16 A conveyor with a length of 3500 mm and a working width of 1250 mm with two speed ranges: low from 1.7 m / min and high up to 10.7 m / min - for the time of unloading from the carousel dryer. Main engine power 2.2 kW.

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Nedpfx Aajwu Ackj Rslf Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3

Condition: used, Year of construction: 2009, Painting system Manufacturer: Cefla Type: Easy 2000D Year of manufacture: 2009 Painting line consisting of: - Infeed conveyor with light barriers - Dust removal brush machine - Spray booth with two automatic spray arms, each equipped with six spray guns - Steel belt conveyor for collecting excess paint that does not adhere to the workpieces - Automatic transfer conveyor to the drying oven - Three-chamber drying oven for painted parts - Outfeed conveyor from the drying oven Including: - Heat recovery unit (recuperator) - Extraction system for volatile substances - Dust extraction system for the infeed table Nedpozuzt Esfx Aa Rslf Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Spraying machine CEFLA FINISHING EASY 2000 DUO D Pictures are only sample - Producer Cefla - Type EASY-DUO - Year of construction 2008 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Exhaust air 12.000 m³/h - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with roller - Lacquer reclaiming system with v-belt - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - spray gun type Kremlin AVX - Airmix spraying system - Height adjustment for spraying guns - Number of lacquer pumps 1 Stk. - Producer lacquer pump Kremlin 16-120 - Supply air box - Ex-prevention - Suitably for solvent based lacquer Nodpjzv Tg Tefx Aa Rolf - Suitably for water based lacquer - Used machine, good condition - Length ca. 6152 mm - Width 3.700 mm - Height 2.895 mm - Total connection power 18 KW - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: used, Year of construction: 1994, functionality: fully functional, Listing for Machineseeker – Used CEFLA Painting Line (Fully Operational) For sale is a complete, fully operational paint booth machine dismantled from a used production line. Manufacturer: CEFLA – premium industrial equipment for professional coating applications. System Components: 1 pc. belt conveyor • Length: approx. 1,900 mm • Belt width: 1,400 mm • Conveyor speed: 1.7 – 10.7 m/min 1 pc. CEFLA EASY 2000 automatic spraying machine Condition: Used, fully functional Nodpfx Aajxdwi Ie Rjlf Regularly serviced Immediately ready for use Field of application: Ideal for industrial coating and drying processes, e.g. furniture or wood processing sectors. Other information: Viewing possible by appointment

Condition: excellent (used), Year of construction: 2007, I sell the 2-lamp UV-drying tunnel Cefla UV 2000 M2 TTE 2000 Nlodpfxoyzr Ags Aa Rof Year 2007 Working width 1400mm. Total length 2,00m Very good condition, available immediately.

Condition: excellent (used), Year of construction: 1999, I sell the 1-lamp UV-drying tunnel Cefla UV TTE 2000 Year 1999 Working width 1400mm. Total length 2,00m 1 Lamp GA 120 W Njdoynvw Hopfx Aa Rolf Very good condition, available immediately.

Condition: used, Year of construction: 2007, UV dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445) mm - Working height: 900 ± 40 mm - Control panel on the right - Max. part height: 70 mm - Number of tubes from above: 2 - Straight-mounted tubes: 2 - Suitable for mercury tubes - Suitable for gallium tubes - Max. tube power: 120 W/cm Nlodpfoxn Nlvox Aa Ref - Bar transport - Length: 2,500 mm - Width 2,300 mm - Height 1,500 mm - Volts, Hz 400 / 50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5 % Images are examples of a machine of the same design*

Condition: good (used), Year of construction: 2002, functionality: fully functional, working width: 1,300 mm, was completely refurbished in 2022. Nedoy Uacuopfx Aa Relf

Condition: used, Year of construction: 2002, AVAILABLE from 08/2026 UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TN3000 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - diagonally positioned tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - with belt transport - Length 3.000 mm - Width 2.300 mm Nlodoyifwpopfx Aa Ref - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5%

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Nljdpfx Aaswmw Dae Rsf

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! Nledpezg Epujfx Aa Rof For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: used, Used chamber filter press Andritz/Netzsch 1500x2000 with 125 plates Quantity: 2 available Press dimensions: Length: 13455 mm x Width: 3125 mm x Height: 4635 mm Empty weight: 51600 kg Filter area: 459 m2 Filter area after expansion: 559 m2 Press volume: 4989 l Press volume after expansion: 6080 l Nodpfxszlb D So Aa Rjlf Cake thickness: 25 mm

Condition: new, Year of construction: 2025, Construction staircase, suitable for use on any construction site. 2 units available in stock. Can be assembled by one person in 15 minutes. Two staircases can be mounted on top of each other. Half-turn staircase, left + right. Njdpfxjzhhl Is Aa Relf A complete staircase can be stored on a Euro pallet.

Condition: used, Büchel SH-2000-PEV Electrostatic Air Filter Extraction System Extraction capacity: 2000 m³/h Top performance and easy maintenance Nljdpfxozk H I Ho Aa Ref thanks to the filter inserts and adjustable exhaust air flow via the pod. Used, as shown in the pictures. From warehouse stock (may have storage marks). Please refer to the pictures for further technical information. Scope of delivery as shown in the pictures. The invoice will be enclosed with the shipment.

Condition: excellent (used), Year of construction: 2015, operating hours: 600 h, functionality: fully functional, machine/vehicle number: DB 5044Q01A, conveying length: 2,000 mm, working width: 1,300 mm, Powered roller conveyor with UV lamps for preheating, approximately 600 operating hours, in excellent condition. Nlodpfey Emldox Aa Rsf

Year of construction: 1998, condition: used, with powered roller conveyor as a folding table, length 500 mm Technical specifications: - Manufacturer: Celfa - Year 1998 - Model: TTE 2000 - Year of manufacture: 1998 - Working width: 1,300 mm - Overall width: 1,580 mm - Length: 2,000 mm (1,500 + 500 mm) - Working height: 930 mm ±20 mm - Bar diameter: 25 mm - Chrome-plated bars - Bar spacing: 95 mm - Roller spacing on folding table: 115 mm - Feed speed 2,1 - 12,3 m/min. - Feed speed adjustable, handwheel - Motor power, drive: 0.26 kW Exx-d - Volts / Hz: 400 V / 50 Hz Nedpfxozgt A Nj Aa Rolf - Feed speed: approx. 5–25 m/min. - Feed via handwheel adjustment - Location: in stock

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm Nodpezizkysfx Aa Rjlf TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2014, A high-performance, fully operational industrial roller coating line by CEFLA. All machines are from the 2014 and operated continuously until the end of 2024 (discontinued only due to the end of production), well-maintained, and ready for immediate integration into production. This setup is perfect for furniture factories, flooring manufacturers, and door producers seeking top-tier automation and flawless surface finishing Line Composition (15 Units Total): Fully operational: Coating & Filling Machines: 4 units - Smartcoater MF-EVO Roller Coaters 1 unit - CEFLA SP1-EVO Roller Filler/Spackling Machine UV Curing Ovens: 2 units - CEFLA UV-R M1 Curing Ovens Nodpjzu Rufofx Aa Relf 2 units - CEFLA UV-R M2 Curing Ovens Transporters: 2 units – CEFLA TB900 Transfer Conveyors Dimensions: 900 x 1580 x Adjustable Height 860–940. Non-operational - for spare parts/repairs: 4 units – CEFLA Smartcoater MF-EVO Roller Coaters

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Nljdpfszq Axzex Aa Rsf Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity Installed electrical power for both dryers: approx. 210 kW 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Effective passage height: 80 mm Solvent-containing air discharged to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch panel VS-spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Supply air to the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Njdpjztp Tkofx Aa Relf Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Effective passage height: 80 mm Installed electrical power: 115 kW Solvent-containing air discharged to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch panel VS-spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Outlet electrical power: 1.5 kW; Supply air to the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-frost protection for No. 1 heating register, with sensor and automatic control of the shut-off valve 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is highly efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Supply and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air knife outlet velocity max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Effective passage height: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch panel TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized, PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Subject to change, errors and prior sale in technical data)

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07022/01, We offer this used Cefla Finishing SPRAYBOTIC RU MW machine, manufactured in 2007. Machine type: SPRAYBOTIC RU MW Year of manufacture: 2007 Serial number: 07022/01 Supply voltage: 380 V Nljdszhbd Rspfx Aa Rjf Electrical frequency: 50 Hz Total installed power: 38.5 kW If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Paint line Paint line consisting of: Vacuum loading system Technical data - 2-strand - Roller width: approx. 1000 mm Wide belt sanding machine Manufacturer: Büftering Type: Classic 213EB Year of manufacture: 2000 Technical data - Working width: max. 1350 mm - Vacuum conveyor belt - Electronic sanding pad Belt conveyor system Manufacturer: Belting Year of manufacture: 2019 Technical data - Dimensions: 6100 x 1000 mm Dust extraction system Manufacturer: Heesemann Type: EA2 Year of manufacture: 1990 Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 Throughfeed drying tunnel Manufacturer: Bürkle Technical data - with UV lamp Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 UV drying tunnel Manufacturer: Elmag Type: Ti166-35+2iVM1-65 Technical data - equipped with 2 UV lamps Wide belt sanding machine Manufacturer: Büftering Type: Optimat SCO 313QHQ Year of manufacture: 2007 Technical data - Working width: approx. 1350 mm - Machine equipped with 3 sanding units (cross-longitudinal-cross) 4-tier intermediate buffer Technical data - Tier size: 3000 x 1350 mm Dust extraction system Manufacturer: Cefla Type: TN3500/TT Year of manufacture: 2004 Paint robot Manufacturer: Cefla Type: Spraybotic MD Year of manufacture: 2004 Technical data - Throughput width: approx. 1350 mm - Automatic spray arm with 4 spray nozzles - Pump station with 5 Graco paint pumps Intermediate transport Manufacturer: Cefla Type: TN3591/TT Year of manufacture: 2004 Throughfeed multi-level dryer Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 UV drying tunnel Manufacturer: Venjakob Year of manufacture: 2008 Technical data - Infeed conveyor belt - 4 UV drying lamps (1 below, 3 above) - mounted on 2 belt conveyors Venjakob Belt conveyor Manufacturer: Cefla Type: TN3500/E Year of manufacture: 2004 Technical data - Conveyor length approx. 3500 mm Belt conveyor Manufacturer: Cefla Type: TT/1V/3750 Nlodpfszuzhijx Aa Rof Year of manufacture: 2004 Technical data - Conveyor length approx. 3750 mm Roller conveyor Technical data - Roller width: 1700 mm - Conveyor length: 3750 mm Edge sanding and brushing machine Technical data - with alignment table - 3 sanding units for cross and longitudinal processing of door leaf edges Belt conveyor Manufacturer: Belting Technical data - Conveyor length: approx. 4000 mm - Belt width: approx. 1170 mm Turning system for door leaves Manufacturer: Kraft Year of manufacture: 2018 Individual components of the system can be purchased separately as follows: Vacuum loading system €10,000.00 Büftering Classic 213EB wide belt sanding machine €12,000.00 Belting belt conveyor €3,500.00 Heesemann EA2 dust extraction system €2,500.00 Bürkle DAL1-1300 paint application machine No. 1 €7,500.00 Bürkle throughfeed drying tunnel €9,000.00 Bürkle DAL1-1300 paint application machine No. 2 €7,500.00 Elmag UV drying tunnel €13,000.00 Büftering Optimat SCO 313QHQ €15,000.00 4-tier intermediate buffer €10,000.00 Cefla TN3500/TT dust extractor €4,000.00 Cefla Spraybotic MD incl. pump station €50,000.00 Cefla TN3591/TT intermediate transport €4,000.00 Cefla VN 2000/3/7500/300-24 multi-level dryer €20,000.00 Venjakob UV drying tunnel €13,000.00 Cefla conveyor belt TN3500/E €2,500.00 Cefla conveyor belt TT/1V/3750 €2,500.00 Roller conveyor €2,000.00 Edge sanding and brushing machine €5,500.00 Belting conveyor belt €2,000.00 Kraft turning system for door leaves (2018) €20,000.00 Note: T

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, The Cefla iBotic lacquering machine is an advanced robotic finishing solution designed for high-precision coating applications in industrial production. Engineered for flexibility and efficiency, it uses intelligent automation to deliver consistent, high-quality lacquer finishes on a wide range of surfaces. Its programmable system allows for precise control of spray patterns, reducing material waste while ensuring uniform coverage. Ideal for manufacturers seeking to optimize productivity and finish quality, the iBotic combines cutting-edge robotics with reliable performance in modern finishing lines. Nlsdpfjy E Huxsx Aa Rof