Used Central Aspiration 5 Ventilators Recuper for sale (68,466)

Condition: excellent (used), Year of construction: 2010, I sell the complete aspiration system ELBH 5x Ventilator 7,5kW Nodpforft Aiox Ai Tjwn Total power apprx. 45.000 m3 / hr. Recuperation system for returning the hot air back Full system of dust extraction hoses. pneumatic pads, safety elements included in price. Year 2010 Possible to sell immediately only as a complete set.

Condition: excellent (used), Year of construction: 2010, I sell the complete aspiration system ELBH 4x Ventilator 7,5 - 11,0 KW Total power apprx. 40.000 m3 / hr. Recuperation system for returning the hot air back Waste entry in container Nedsyzch Tepfx Ai Tewn Full system of dust extraction hoses. pneumatic pads, safety elements included in price. Possible to sell immediately only as a complete set.

Year of construction: 2000, condition: excellent (used), I sell the complete aspiration system ELBH 2x Ventilator 15kW Total power 21.000 m3 / hr. Njdjim Ex Nepfx Ai Tewn Recuperation system for returning the hot air back Full system of dust extraction hoses included in price. Year 2000 Possible to sell immediately only as a complete set.

Condition: used, functionality: fully functional, Central ventilation unit HELIOS Air 1 XH1500 with highly efficient heat recovery and integrated air reheating. For controlled supply and exhaust ventilation of larger residential, commercial, or industrial areas. 2 EC fans at 0.5 kW each, 1,490 m³/h at 350 Pa. Electric preheating coil 3.9 kW, electronic reheating coil 3.8 kW, cross-flow heat exchanger, integrated filter box. Includes HELIOS Universal control unit ECO and 2 HELIOS duct sensors TFK – a functionally complete system. Technical data: - Air flow rate 1,490 m³/h at 350 Pa; fans 2 x 0.5 kW EC - Preheating coil 3.9 kW / Reheating coil 3.8 kW; cross-flow heat exchanger; integrated filter box - Control system: HELIOS Universal control unit ECO and 2 duct sensors TFK included - From a commercial environment, sold in its current condition without warranty. More units and equipment are continuously being offered for sale as part of a laboratory and pilot plant liquidation – inquiries are welcome. Nwjdpfxjzmaqae Ai Tjn Sold on behalf of a customer via the Köck auction house. Located in eastern Austria, exact address available upon request. Collection/dismantling by the buyer.

Condition: new, All five surfaces (4 side panels + bottom) are made of robust mesh to ensure ventilation of the firewood. At the corners of the top surface, there are 4x2 retaining loops (two small and two large) for lifting, and on the underside, there is a closable opening in the bottom for emptying the big bag. Nwjdpfx Ae Acbtxoi Ten

Condition: new, All five surfaces (4 side panels + bottom) consist of sturdy mesh to provide ventilation for the firewood. At the corners of the top side, there are 4x2 retaining loops (two small and two large) for lifting. On the underside, there is one loop at two corners for tipping the big bag. Nsdpo Acbtlsfx Ai Tjwn

Condition: new, All five surfaces (4 side panels + bottom) consist of sturdy mesh to ensure ventilation of the firewood. Nwodpj Adbipofx Ai Ton At the corners of the top side, there are 4 loops for lifting; on the underside, there is one loop at two corners each for tipping the big bag.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 Nwedpezukurefx Ai Tsn - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system - Vacuum pump: 250 m³/h - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.

Condition: used, functionality: unexamined, Ferwood code: RU0011651 - Manufacturer code: K6343K0949 - Condition: Used - Functionality: Not tested - If interested, we offer reconditioning service, contact us. Nwodpfx Aiowtnqks Tjn

Condition: used, mileage: 279,956 km, power: 75 kW (101.97 HP), first registration: 04/2015, fuel type: diesel, next inspection (TÜV): 08/2028, color: white, gearing type: mechanical, emission class: euro5, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €7,900.00 net * Volkswagen Caddy Maxi 1.6 BlueMotion, 5 seats, wheelchair ramp, air conditioning, 2 sliding doors, Euro 5 * Seats (2+3) * 5-speed transmission * Radio CD * Front airbags * Daytime running lights * USB port Nwodpfx Aiszuu Txo Ton * Isofix * Electric windows * Electric mirrors * Central locking * Start/Stop system * Tire pressure monitoring * Cruise control * Air conditioning * ABS * ESP * 1 wheelchair space * Wheelchair ramp, 300 kg capacity * Fog lights * Wheelbase 301 cm * Unladen weight 1679 kg * Payload 601 kg * Permissible total weight 80 kg * Passenger car registration * Vehicle no. 26 OPENING HOURS Monday - Friday from 9:00 AM to 5:00 PM (by appointment...) CONTACT INFORMATION Telephone: WhatsApp E-mail:

Condition: used, mileage: 331,892 km, power: 75 kW (101.97 HP), first registration: 04/2015, fuel type: diesel, next inspection (TÜV): 08/2028, color: white, gearing type: mechanical, emission class: euro5, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * 7,200 EUR net * Volkswagen Caddy Maxi 1.6 BlueMotion, 5 seats, wheelchair ramp, air conditioning, 2 sliding doors, Euro 5 Nodpfx Aiezvurqo Tjwn * Seats (2+3) * 5-speed transmission * Radio/CD player * Front airbags * Daytime running lights * USB port * Isofix * Electric windows * Electric mirrors * Central locking * Start/stop system * Tire pressure monitoring system * Cruise control * Air conditioning * ABS * ESP * 1 wheelchair space * Wheelchair ramp, 300 kg capacity * Fog lights * Wheelbase: 301 cm * Unladen weight: 1679 kg * Payload: 601 kg * Permissible total weight: 80 kg * Passenger car registration * Vehicle number: 51 OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment only...) CONTACT INFORMATION Telephone: WhatsApp E-mail:

Year of construction: 2014, condition: repair required (used), functionality: limited functionality, • Production freeze dryer, Parker Freeze Dry 5-945-135, custom model, made to order for client’s specification; CE-marked, 400V 50Hz three-phase power. Nominal condensercapacity 453kg of ice. • Dual phase vacuum pump cluster, Busch, RA0255 main pump (max. 25A 400V) + WV1500 booster pump (max. 20A 400V), serviced 2023, overhauled 2021. • Heat control system, programmable, West ProVU + 4 x 6100+ Nwedpfx Aez Dz Rtsi Ten • Five product carts, 27 heated shelves and approx.100kg capacity each (max. 50A 400V). • 2 Full tray sets (2x135 pieces), 18x26 inch, aluminum. • Outdoor cooling unit, cooling + hot gas de-icing, compressor rebuilt and overhauled 2022/2025. Max power consumption 50A 400V. cooling face measurements 4.6mx2.4mx1.3m measurements of the carts 20cmx120cmx70cm

Condition: good (used), Year of construction: 2016, functionality: fully functional, workpiece diameter (max.): 90 mm, spindle speed (max.): 3,450 rpm, grinding spindle speed: 2,845 rpm, Equipment: emergency stop, For sale is a precision wet cut-off grinding machine from Struers in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Struers • Model: Labotom-5 • Year of manufacture: 2016 • Disc diameter: approx. Ø 250 mm • Max. cutting diameter: approx. Ø 90 mm / 42×120 mm • Speed: approx. 2,845 rpm (50Hz) • Speed: approx. 3,450 rpm (60Hz) • Includes matching Struers Cooli-1 cooling system • The system is ideal for precise, wet abrasive cutting in the laboratory or for metallographic sample preparation. • Condition: Used, functional Shipping costs via freight forwarder: approx. €140 International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Njde Adu Ewepfx Ai Town Sale from location 42855 Remscheid, free on truck. Errors in technical data and prior sale are reserved.

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6082, S.A. Central Adams Heavy Duty Press & Pump (Made in Italy / Milano) Heavy-duty industrial press complete with hydraulic pump unit. Previously used within a manufacturing environment and now surplus to requirements following equipment changes. Specification: Manufacturer: S.A. Central Adams Model: MTE 84 EXS0-D Heavy-duty industrial construction Hydraulic press and pump assembly Nsdpfxoz Nkuae Ai Town Suitable for workshop, engineering, fabrication, manufacturing and maintenance applications Condition The machine was operational when last in use but is being sold as surplus equipment. Due to its age and the nature of industrial machinery, it is sold as seen without warranty. Buyers are welcome and encouraged to inspect prior to bidding. Collection: Collection only due to size and weight. Forklift loading may be available by prior arrangement. Located in Edenbridge, Kent, TN8 6HL, England Important Sold strictly as seen. Viewing welcomed. Please contact for further information, dimensions or additional photographs. This is a substantial industrial machine and represents an excellent opportunity for workshops, engineers, machinery dealers or refurbishment specialists. Keywords: Hydraulic Press, Workshop Press, Industrial Press, Engineering Machinery, Manufacturing Equipment, Fabrication Equipment, Heavy Duty Press, Hydraulic Pump Unit, Factory Machinery., Factory Machinery.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 221363, working width: 400 mm, passage height: 250 mm, total length: 1,300 mm, total width: 1,070 mm, total height: 1,450 mm, height adjustment type: mechanical, overall weight: 600 kg, working height: 900 mm, compressed air connection: 6 bar, extraction nozzle diameter: 100 mm, type of input current: three-phase, power: 8.73 kW (11.87 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 250 mm, workpiece width (max.): 400 mm, empty load weight: 580 kg, input current: 16 A, Equipment: emergency stop, rotational speed infinitely variable, This used cross-cutting machine, equipped with one brushing unit, is designed for creating textures on wooden surfaces. The combination of the cross-cutting unit and the brushing unit allows for the creation of various effects, including authentic band saw textures and other natural surface patterns. The machine features a TAP function that enables the application of a random effect to the workpiece. This is achieved using five separate tapping heads above the sanding belt. A compressed air connection is required for the operation of this function. Nsde Aazymspfx Ai Town By adjusting the transport speed, the settings of the cross-cutting unit, and the brushing unit, the intensity of the process can be easily controlled. This allows for the creation of a wide range of textures and finishes, depending on the desired end result. The machine is suitable for processing various wooden products, including wooden floors, wall panels, furniture components, doors, and other wooden products where a distinctive surface texture is desired. This particular machine is offered as a used machine, is in very good condition, and is immediately available. For additional information, technical specifications, or photos, please contact us.

Condition: used, Year of construction: 2005, operating hours: 10,329 h, functionality: fully functional, overall weight: 12,000 kg, Equipment: documentation/manual,

Condition: excellent (used), CATALOGUE NUMBER 7133 TECHNICAL DATA - max. width of workpiece: 220mm - max. height of workpiece: 120mm – 5 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 120mm 3) vertical left 120mm; 2 and 3, 11kW 4) horizontal upper 220mm, 11kW 5) horizontal lower 220mm, 5.5kW Nwodpfx Aij Af Uy Ss Tjn - all spindles adjustable up/down, left/right - spindle diameter 40mm - pneumatic pressure pads - from above: 4 infeed rollers, toothed, including 2 double rollers - from above: 1 double outfeed roller, smooth, rubber - from below: outfeed roller, rubber - feed on Cardan shafts - feed speed adjustment - feed motor 2.2kW - lifting motor 0.25kW - electric adjustment of planing thickness - length of infeed table 1970mm - central lubrication - diameter of dust extraction nozzle 4x120mm, 140mm - dimensions (L/W/H) 3500x1550x1400mm - weight 1750kg ADVANTAGES – with 5 heads – German-made – unpainted – used planer, very good condition Net price: 39900 PLN Net price: 9280 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 26-291510 R 1368710, Rod-type magazine for bar feeders, FMB TURBO 5-55/3200"A" Magazine for bar feeders, FMB TURBO 5-55/3200"A" Njdeznl Uajpfx Ai Tewn

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table length: 4,000 mm, table width: 1,500 mm, table height: 300 mm, SHW PowerSpeed 5 Travel ranges • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle head horizontal): 1,300 mm Control system • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Swiveling range of milling head mount: 360 x 1 degree • Swiveling range of milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Briefly 36 – 6,000 rpm Automatic tool changer • Tool magazine for 48 tools Clamping plate • Clamping area: 4,000 x 1,500 mm Chip conveyor • Collection length: 4,000 mm Coolant system • Tank capacity: 500 l Splash and chip guard • 1-sided, with 2 sliding doors, manually movable About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among other things, the supply of spare parts, on-site customer service, machine overhauls and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ----- _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - milling machine used - used CNC milling machine - used boring and milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - milling machine - large part machining - large-part machining - large part machining - CNC large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine Nwodpfj Af Ig Hsx Ai Tjn

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period from November 16th to November 26th. TECHNICAL DETAILS General Information Machine Number: 00071830 Hours Read: 3,143 h Control System: Siemens Sinumerik Electrical Data Operating Voltage: 400 V Frequency: 50 Hz Control Voltage: 24 V Rated Power: 150 kW Working Area Maximum Height: 1,270 mm Number of Turrets: 2 Workpiece Length: min. 700 mm Workpiece Length: max. 2,400 mm Workpiece Diameter: min. 50 mm Workpiece Diameter: max. 200 mm Main Spindle Main Spindle Drive Power: 2 × 37 kW Chuck Bore: max. 210 mm Chuck Data Piston Stroke: 25 mm Stroke per Jaw: 11.1 mm Actuation Force: max. 52.5 kN Actuation Pressure: max. 30 bar Nsdpfx Ao Aaqz Tsi Tswn Speed: max. 2,000 rpm Transport Transport: possible on a standard truck EQUIPMENT Loading System Large quantity of VDI 50 tool holders Partially powered VDI 50 tool holders Partially standard VDI 50 tool holders Workbench Workshop drawer cabinet Extensive documentation

Condition: excellent (used), Year of construction: 2012, 13 calibres, ranging from a maximum diameter of 13 mm to a minimum diameter of 1 mm Nodpfe Afptlex Ai Tewn In very good, well-maintained condition

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Nwjdpfx Aio Afznue Ton Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 0307-1866 Operating hours: 9,316 h Control system: Siemens SINUMERIK 840 Dsl Working height: approx. 1,300 mm Electrical Data Operating voltage: 400 V Frequency: 50 Hz Rated current: 315 A Workpiece Area Workpiece length: min. 780 mm Workpiece length: max. 3,000 mm Workpiece diameter: min. 20 mm Workpiece diameter: max. 200 mm Workpiece weight: max. 250 kg Workpiece Drive and Clamping Workpiece drive/clamping: 2 × hydraulically actuated front chucks, manufacturer SAV Chuck bore: max. 210 mm Spindles Spindle power: 2 × 37 kW Speed: 2,200 rpm Cross slide NC1, left X1-axis: 450 mm Z1-axis: 1,980 mm Cross slide NC2, right X2-axis: 450 mm Z2-axis: 1,980 mm M-head slide Q1-axis, left: 1,980 mm Nedpfxoz Uhyde Ai Tjwn Q2-axis, right: 1,980 mm Tailstock and steady rest slide W1-axis, left: 1,980 mm W2-axis, right: 1,980 mm Rapid Traverse Rapid traverse speed: max. 20 m/min EQUIPMENT Portal loading system PROMAT 2 loading units Chip conveyor Coolant system Matching VDI 50 tool holders Partially powered VDI 50 tool holders Chuck jaws Documentation

Condition: excellent (used), mileage: 628,061 km, power: 300 kW (407.89 HP), first registration: 08/2012, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 6x2, fuel: diesel, brakes: intarder, color: white, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, navigation system, power mirror, soot filter, = Additional Options and Accessories = - Speed limiter - Air suspension - Particle filter - Rear view camera - Sun visor - Power take-off (PTO) - Central lubrication system = Additional Information = General Information Year of construction: 2012 Registration number: 88-BBB-9 Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65/22.5; Max. axle load: 9000 kg; Suspension: Leaf spring suspension Rear axle 1: Tire size: 295/80/22.5; Twin tires; Differential lock; Max. axle load: 11500 kg; Suspension: Air suspension Rear axle 2: Tire size: 385/65/22.5; Lift axle; Max. axle load: 7500 kg; Suspension: Air suspension Weights Unladen weight: 16,615 kg Payload: 11,385 kg GVW: 28,000 kg Functional Mast: Telescopic (5 sections) Lifting capacity: 12,000 kg Lifting height: 1,800 cm Crane: HIAB 422EP-5 HIPRO, year of construction 2012, behind the cab Body manufacturer: HIAB 422EP-5 HIPRO CE marking: yes Condition Technical condition: very good Optical condition: very good DAF 85.410 6X2 + CRANE HIAB 422EP-5 HIPRO SEMI-TRACTOR EURO 5, 410 HP Nwodpfx Aiov Sb Nle Tjn DRIVE 6X2 DIFFERENTIAL LOCK 9 TONNES PER AXLE WHEELBASE 340 CM AIRCRAFT DAY CAB, AIR CONDITIONING NAVIGATION AUTOMATIC WITH ENGINE BRAKE TRACTOR VERSION HIAB 422EP-5 HIPRO 8 X HYDRAULIC EXTENSIONS 4 X OUTRIGGERS TOTAL WORKING HEIGHT 18 METERS MAXIMUM LIFTING CAPACITY 12,000 KG MAXIMUM LIFTING CAPACITY AT 15.5 METERS 2520 KG RADIOLOGICAL INSPECTION FOLLOW US NOW ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU МИ ВІДПОВІДАЄМО УКРАЇНСЬКОЮ

Condition: good (used), Year of construction: 1996, functionality: fully functional, WE OFFER AN GOOD CONDITION MATSUURA WITH 4 TH AND 5TH AXIS. MACHINE WAS WORKING IN ROLLS ROYCE FROM NEW. AND WAS ALL TIME GREAT MAINTAINED. Description MACHINE WAS WORKING IN ROLLS ROYCE FROM A NEW AND IS GREAT MANTAINED HAS NEW BATTERIES, BACKUP will be present on key and email. WITH 4 TH AND 5 TH AXIS FIRST TIME IN USE 1996 mfg : : MATSUURA mpn MC-800VF Matsuura MC-800VF : ManufacturerMATSUURAModelMC-800VF 3+2 AXIS Year1995 ConditionUsed Brand MATSUURA ControlCNC (Yasnac i80 CNC control) Table1200mm x 400mm Nwedpfxjvkx Tls Ai Tsn Power15 hp Rpm 8000 rpm Atc 30 TaperBT40 Axis3+2 Weight APROX 7000 KG TravelsX = 800mm, Y = 440mm, Z = 485mm Specifications Manufacturer MATSUURA Model MC-800VF 5 AXIS Year 1995 Condition Used Brand MATSUURA Control CNC (Yasnac i80 CNC control) Table 1200mm x 400mm Power 15 hp Rpm 8000 rpm Atc 30 Taper BT40 Axis 3+2 Weight APROX 7000 KG Travels X = 800mm, Y = 440mm, Z = 485mm