Used Certuss Universal 1500 for sale (7,505)

Year of construction: 2006, condition: ready for operation (used), Output: 1.5t steam/h, max. nominal power: 1093kW/h, gas pressure: 50mbar, fuel: natural gas, including water container, two pumps, safety devices and steam dryer. Klsdpfx Aef Tdcuoqvjt

Condition: excellent (used), CERTUSS Universal 500 TC. 500 kg/h. 10 bar. Rapid steam generator Kodjxqr D Tspfx Aqvslt

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: CERTUSS Type: Universal 500TC Capacity: 500 kg/h Maximum thermal output: 364 kW Operating pressure: 16 bar Test pressure: 57 bar Water content approx.: 42.9 liters CE marking: CE 0035 Kjdpsy Tvukefx Aqvolt Year of manufacture: 2017 Equipped with Certuss gas burner, gas control system, control cabinet with touch control, mounted on the boiler body, feed water pump, feed water tank and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 2016, 1 used rapid steam generator ----- Manufacturer: CERTUSS Type: Universal TC Klodpfx Aqewhxh Aevjt Capacity: 700 kg/h Maximum heat output: 459 kW Operating pressure: 10 bar Water capacity: 103.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2016 Equipped with a Certuss gas burner, gas control system, control cabinet with touch control, mounted on the boiler body, and the existing coarse and fine fittings

Condition: new, Year of construction: 2022, functionality: fully functional, total length: 1,600 mm, total width: 930 mm, total height: 1,980 mm, operating pressure: 29 bar, nominal heat output: 328 kW (445.96 HP), temperature: 240 °C, Brand New Certuss Universal 500 TC EG/NG gas-fired 500kg/hr steam generator with Certuss CVE 500 TC packaged plant module/supply unit The offer includes brand new & never connected: 1x 500kg/h Universal TC Gas Fired Certuss Steam Generator, year of manufacturing 2022 1x Stainless Steel feed water tank (insulated) 1x Steam Injection Tank heating facility 1x Electronic Level Controller for feed water tank 1x Stainless Steel Blow-Down facility 1x Stainless Steel sample cooler 1x Booster Pump and controller 1x Steam Separator c/w trap set 1x Simplex Water Softener 1x Water Meter 1x Water Filter 1x Chemical Dosing Tank and Pump CVE Package Plant Module, year of manufacturing 2022 Automatic Start/ Stop/ Blow-down Facility Generator pary Certuss Universal 500 TC EG/NG zasilany gazem o wydajności 500 kg/h z /jednostką zasilającą Certuss CVE 500 TC Ofera obejmuje nowy, nieużywany i nigdy niepodłączony komplet: 1x Wytwornica pary Certuss Universal TC 500kg/h zasilana gazem, rok produkcji 2022 1x Zbiornik wody zasilającej ze stali nierdzewnej (izolowany) 1x Instalacja grzewcza zbiornika z wtryskiem pary 1x Elektroniczny regulator poziomu wody w zbiorninku 1x Urządzenie wydmuchowe ze stali nierdzewnej 1x Chłodnica próbek ze stali nierdzewnej 1x Pompa wspomagająca i sterownik 1x Separator pary z zestawem odwadniacza Kedpfx Aeygu R Neqvjlt 1x Zmiękczacz wody Simplex 1x Wodomierz 1x Filtr wody 1x Zbiornik do dozowania chemikaliów i pompa Jednostka zasilająca CVE rok produkcji 2022 Tryb Automatycznego startu/stopu/oddmuchu

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 105 mm, turning diameter: 560 mm, turning length: 1,500 mm, total length: 2,840 mm, total width: 1,150 mm, total height: 1,460 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, bed width: 350 mm, overall weight: 3,200 kg, Technical data Swing over bed: 560 mm Swing over cross slide: 355 mm Swing in gap: 785 mm Turning length in gap: 170 mm Distance between centers: 1500 mm Bed: induction hardened Bed width: 350 mm Chuck diameter: 315 mm Spindle bore: 105 mm Spindle nose: D1-8 Spindle taper: MT7 Spindle speed range: 25 – 1500 rpm Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.073 – 2.048 mm/rev Cross feed range: 0.020 – 0.573 mm/rev Metric threads: 0.2 – 14 mm Inch threads: 2 – 112 T.P.I. Module threads: 0.1 – 7 M.P. Diametral pitch threads: 4 – 112 D.P. Rapid feed: longitudinal 4.2 m/min cross 1.9 m/min Tailstock quill diameter: 75 mm Tailstock quill travel: 180 mm Tailstock taper: MT5 Main motor power: 7.5 kW Coolant pump power: 0.1 kW Dimensions (L × W × H): 2840 × 1150 × 1460 mm Klodpfx Asytpy Seqvjt Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 19-1134P, Year of construction: 2020, operating hours: 4 h, load capacity: 1,500 kg, lifting height: 3,300 mm, mast type: duplex, gearing type: hydrostat, battery voltage: 24 V, Equipment: CE marking, clamp, gripper hydraulics, Manufacturer: APE Engineering GmbH Type: Universal Pallet Truck UHW 1500-27/E-Tele-SO Year: 2020 Voltage: 24V Lifting height: approx. 3300 mm (center of rotary device) Load capacity: 1500 kg Operating hours: 4 h (readout) This unit is designed for use on level ground for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled. Equipment: - 360° hydraulic rotary device - Initial lift approx. 100 mm - Hydraulic clamping device - Integrated 230V charger - 24V tray battery from Hawker Scope of delivery: - Universal pallet truck - Complete documentation including circuit diagrams and EC Declaration of Conformity Dimensions: Width: approx. 1650 mm Height: approx. 2300 mm Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment The machine can be demonstrated on site. Ksdpfew Izrcsx Aqvjlt All information subject to change. Intermediate sale reserved. The item is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, limb, or health.

Condition: new, Year of construction: 2026, Machine features The 800×1500/2000/3000 series modern lathe is equipped with rapid feeds, a multi-plate clutch and digital readouts, due to which the lathe is suitable for professional and industrial work. Inductively hardened and precisely ground bed Massive cast iron structure of the machine Lathe equipped with a quick longitudinal and transverse movement Main arbor with ball bearings 105 mm spindle bore Digital readouts for 3 axes Technical data Swing over bed 800 mm with an LCD readout Swing over cross slide 460 mm Swing over gap 900 mm Centre distance 1500/2000/3000 mm Bed inductively hardened Bed width 500 mm Lathe chuck diameter 315 mm Spindle bore diameter 105 mm Spindle taper D1-8 DIN 55029 Spindle speed 25–1600 rpm Kodpfxsvwz Ufe Aqvelt Maximum tool dimensions 25×25 mm Longitudinal feed range 0.044–1.480 mm/turn Transverse feed range 0.022–0.740 mm/turn Metric thread 0.35–120 mm Inch thread 7/16–80 Gg/1" Tailstock quill extension 235 mm Tailstock quill taper MK 5 Digital readout for 3 axes Main motor power 7.5 kW Dimensions 4800×1320×1580 mm Net weight 3820 kg

Condition: new, Year of construction: 2026, Industrial universal lathe with speed adjustment from from 8 rpm. Turning diameter – 500 mm, 1500 mm turning length, 105 mm spindle bore. Machine features Modern industrial universal lathe, easy in handling, equipped with a 3 axes digital readout. Useful in renovation and tool departments as well as in high quantity production. Wide area of application, including mechanical engineering, manufacturing, high quantity machining, training workshops, etc. Removable bridge allows for machining elements of large diameter Modern bearing of the main arbor with ball bearings Central system of switching feeds, a lead screw and a lead shaft for threading Accurate speed and feed adjustment Bed of the machine is torsion-resistant and vibration-free, providing basic grounds for accurate turning Technical data Swing over bed 500 mm with LCD readout Swing over cross slide 300 mm Turning diameter over bridge gap 710 mm Turning length over bridge gap 240 mm Centres distance 1500 mm Bed inductively hardened Bed width 400 mm Lathe chuck diameter 315 mm Spindle bore diameter 105 mm Spindle mount D1-8 CAMLOCK Spindle taper MK6 Spindle speed 36–1600 rpm (12 levels) Maximum tool dimensions 25×25 mm Longitudinal feed range 0.063–2.52 mm/turn Transverse feed range 0.027–1.07 mm/turn Metric thread 1–14 mm (22 types) Inch thread 28–2 stroke/inch (25 types) Kedpfxsi Apqls Aqvjlt Modular thread 0.5–7 mm (18 types) D.P. thread 56–4 D.P. (24 types) Rapid longitudinal feed longitudinal – 4.5 m/min, transverse – 1.9 m/min Tailstock quill diameter 75 mm Tailstock quill stroke 150 mm Tailstock taper MK5 Digital readout for 3 axes Main motor power 7.5 kW Coolant pump power 0.09 kW Overall dimensions 3132×975×1270 mm Net weight 3300 kg (3800 gross) Default equipment 3 axes digital readout Ø315 mm self-centering 3-jaw chuck Ø400 mm independent 4-jaw chuck Face plate Follow rest Steady rest Spindle reducing sleeve Dead centre Cross slide rapid feed Foot emergency brake Chips guard on the whole lathe length Newest guard covers EC regulation compliant Cooling system 24V halogen lighting Indicator / gauge for threads Set of handling tools User manual EC declaration of conformity For more information you can visit our web page.

Condition: new, Year of construction: 2026, Industrial metal lathe CORMAK TORNADO 460x1500 - 2x larger casting and solid cast iron bed construction, equipped with a 12-speed gearbox with a powerful 5.5 kW/400V induction motor - maximum torque, large spindle passage 82 mm. Main advantages: - Versatile applications: The lathe is ideal for various tasks, such as turning internal and external surfaces, cones, metric, inch, modular and DP threading, polishing, drilling and broaching. - Stable construction: The 300 mm wide cast iron bed has been hardened and precisely ground, which ensures high vibration reduction and stable working conditions even under heavy loads. - Digital precision: The device is equipped with a digital readout on two axes (longitudinal, transverse), which visualizes the exact values ​​of shifts on the screen thanks to optical measuring lines. - High-quality spindle: Reinforced bearing system in the spindle and large passage of 82 mm guarantee optimum efficiency during work. The set also includes a 3-jaw lathe chuck with a diameter of 250 mm and a 4-jaw chuck with a diameter of 320 mm, a 5.5 kW motor. - Efficiency and productivity: The rapid longitudinal and transverse feed system on the joystick significantly shortens the machining time, and the hardened and ground gears in the spindle gear ensure durability and reliability for years. - Wide possibilities of threading: Thanks to the threading function (metric, inch, modular and DP), right and left, and the possibility of changing parameters without the need to replace gears, work becomes faster and more convenient. The range of supported threads includes, among others, metric (41) from 0.1 to 14 mm, inch (60) from 2 to 112 T.P.I., modular (34) from 0.1 to 7 M.P. and DP (50) from 4 to 112 D.P. - Precise counting of threads: The lathe is equipped with a thread turning clock, which allows for quick setting of the support in the original position after unscrewing the lead screw nut. - Ergonomics and ease of use: The intuitive control panel on the gear allows for quick adjustment of the spindle speed and automatic feed. - Machining of large elements: The replaceable bed bridge allows for turning large elements with a diameter of up to 690 mm and a length of 240 mm (with the bridge removed), which increases the range of the device's capabilities. Technical parameters: Turning diameter over bed ø460 mm Turning diameter over cross slide ø274 mm Turning diameter in recess diameter x width 690 mm x 240 mm Tipper height 230 mm Distance between centers 1500 mm Bed width 300 mm Maximum knife cross-section 25 x 25 mm Total cross slide feed 290 mm Total upper slide feed 120 mm Spindle bore diameter ø82 mm Spindle nose D1-8 Spindle socket (taper) ø90 (1:20) Number of spindle speeds 12 Spindle speed range 25-2000 rpm Screw diameter and threads ø35mm x 6mm Inch threads Pitch Pitch 2-112 TPI (thread per inch) (60) Metric threads 0.1-14mm (41) teeth per inch gear pitch dia. 4-112D.P. (50) Gear modules 0.1-7M.P. (34) Longitudinal feed 0.031-1.7mm/rev. (42) Kljdpfx Aqsvzzqbsvot Cross feed 0.014-0.784mm (42) Total tailstock bearing liner feed 120mm Tailstock bearing liner diameter ø60mm MT gear modules no. 4 Spindle drive motor 5.5kW Coolant pump motor 0.09kW Machine dimensions (LxWxH) 2720x1040x1340mm Weight 2445kg

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment Kledjihf Twjpfx Aqvot 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: new, Year of construction: 2026, Ref:10804 . NEW 2026 Universal Z Card Line. Fully automatic line for making Z card fold-out maps, timetables and other promotional card leaflets etc. State of the art modular design and attachments that can be added as users requirements change. This unique line is capable of performing many different types of production with just one machine. Briefly Comprising:- LoCo friction feeder – bottom (option to go to 300 mm wide) LoCo friction feeder – inner text LoCo friction feeder – top Choice of PVA Cold glue or EVA Hot-melt gluing system – 4 heads with electronic control Counter/kicker Shingle delivery table Including accessories & spare parts. Kedpfjt Dpwdjx Aqvjlt (In-house compressed air supply required). Specification: Stock weight : 90 – 400 gsm2 Production speed : max.150/min. depending on stock. Power requirement : Single phase, 220V, 3kW

Condition: excellent (used), Memmert Forced Convection Drying Oven / Heating Cabinet Manufacturer: Memmert GmbH + Co. KG Type: UFP 800 For sale is a used Memmert UFP 800 from commercial use. Technical data Type: UFP 800 Protection class: IP20 Standard: DIN 12880-KI 3.1 Temperature range: up to approx. 250 °C Connection: 3N~ 400 V / 50-60 Hz Power consumption: approx. 4800 W Current consumption: approx. 7 A External dimensions: approx. 1190 x 750 x 1620 mm Internal dimensions: approx. 1040 x 600 x 1200 mm Volume: approx. 749 liters Weight: approx. 170 kg Equipment Stainless steel interior Forced convection operation Digital control Programmable operation possible Glass viewing doors Multiple insertion levels Klodpfx Aey T Idweqvot Movable on castors Condition Used equipment from commercial use. Optical condition see pictures. Normal signs of use and storage are present. Scope of supply Memmert UFP 800 heating cabinet Inserts / accessories as shown in the pictures Scope of supply exclusively as shown in the pictures. Notes Sale exclusively to commercial customers. Used item without guarantee or warranty. Subject to changes, errors and prior sale. We will gladly answer further questions by telephone or message.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: CERTUSS Type: Junior Capacity: 600 kg/h Maximum heat output: 436 kW Operating pressure: 16 bar Kedpfx Aoy Tvtaoqvelt Water content: 42.9 l Test pressure: 57 bar CE marking: CE 0035 Year of manufacture: 2004 Equipped with Certuss gas burner, gas control system, control cabinet, mounted on the boiler body, feedwater pump, feedwater tank, and the existing coarse and fine fittings.

Condition: ready for operation (used), Year of construction: 2018, overall weight: 29 kg, load capacity: 10 kg, arm reach: 1,300 mm, number of axes: 6, This 6-axis Universal Robots UR10 was manufactured in 2018. It features a maximum payload of 10 kg and an impressive reach of 1300 mm. This industrial robot arm is designed for versatility and efficiency in various applications. If you are looking to get high-quality automation capabilities, consider the Universal Robots UR10 robot arm we have for sale. Contact us for further details. • Robot Type: Industrial • Controller Temperature: 18.6 °C • Main Voltage: 48.2 V Kodpfx Aqoy Tv U Dovslt • Average Robot Power: 33 W • Robot Current: 0.6 A • I/O Current: 0 A • Tool Current: 6 mA • Base Joint Current: 0.0 A • Base Joint Temperature: 15.9 °C • Shoulder Joint Current: 1.2 A • Shoulder Joint Temperature: 17.5 °C • Elbow Joint Current: 3.4 A • Elbow Joint Temperature: 15.7 °C • Input Voltage: 100–240 VAC • Input Frequency: 47–63 Hz • Machine on time: 36,000 h

Condition: excellent (used), Year of construction: 2009, operating hours: 100 h, functionality: fully functional, machine/vehicle number: SKU 102781, overall weight: 1,300 kg, power: 4 kW (5.44 HP), space requirement width: 1,350 mm, space requirement length: 1,520 mm, space requirement height: 1,400 mm, Equipment: rotational speed infinitely variable, The special design of the Multi Grind makes it possible to combine the functions of cylindrical, surface, and tool grinding in a single machine. During external cylindrical grinding, the workpiece can be clamped on one side or supported between centers in the robust tailstock. An internal grinding attachment can also be mounted on the headstock, and even light surface grinding tasks are possible with this model. In tool grinding operations, the Multi Grind allows for precise sharpening of the cutting edges on a wide variety of tools – making it particularly versatile in its application. Kledpexqgi Defx Aqvot - External and internal cylindrical grinding - Surface grinding - Tool grinding - Hydraulic table feed - Extensive accessories

Condition: excellent (used), Year of construction: 2013, 1 used rapid steam generator ----- Manufacturer: CERTUSS Model: Junior 102 SC EG Kledpfxjyfg Hto Aqvst Steam output: 120 kg/h Max. thermal output: 79 kW Operating overpressure: 10 bar Water content: 9.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2013 Equipped with Certuss gas burner, gas control section, control cabinet mounted on boiler body, and existing coarse and fine fittings With feedwater module mounted on base frame consisting of: control cabinet, stainless steel feedwater tank, steam dryer, dosing vessel, Speck feedwater pump and sample water cooler

Year of construction: 2004, condition: excellent (used), 1 used quick steaming units ----- Klsdpfx Aei E Hzteqvot manufacturer : CERTUSS type : Universal capacity : 1.300 kg/h thermal output : 947 kW working pressure : 10 bar test pressure : 57 bar water contents approx. : 155,7 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2004 yoc heating coil : 2018 / 2021 equipped with Certuss oil burner, oil throughput 40-80 kg/h, switch cabinet built on boiler body, feed water pump and the existing fine and coarse fittings.

Year of construction: 2006, condition: excellent (used), 1 used quick steaming unit ----- manufacturer : CERTUSS type : Universal capacity : 1.800 kg/h thermal output : 1.311 kW Kledpfx Aqsikvdqjvjt working pressure : 16 bar test pressure : 57 bar water contents approx. : 218 ltr heating surface : 23,7 m² CE mark : CE 0035 year of construction : 2006 equipped with Certuss gas burner, fittings for gas supply, switch cabinet built on boiler body and the existing fine and coarse fittings. with feed water module, mounted on basic frame, consisting of: switch cabinet, VA feed water tank, Speck feed water pump, dosing tank and mud blow-down tank

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Ksdpfxswra S Rj Aqvolt Equipped with Certuss gas burner, gas control section, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Condition: like new (used), 1500 m² storage platform Schäfer R3000 3-story used, top condition, as new, see pictures Ground floor storage platform steel construction, above 2 floor shelf system Schäfer Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Kjdpfx Ashzw Hioqvjlt Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: excellent (used), approx. 1500 m² 1-storey steel construction platformUsed goods, good condition, see picturesManufacturer STOWLength approx. 58.5 mWidth approx. 54.6 mHeight Lower edge 3.4 mHeight Upper edge 3.7 mUp load 500 kg/m²C-profiles and Sigma-profiles and Sigma-profiles fastenedwith screws and nutsRaster distances adjustable in lengthFloor structure is 38 mm chipboard, highly compacted, groove and tongue underside white, upper side grey coatedNegotiation price: Offer on request!Partial sale possible!disassembled and loadedWare in stock.transport costs possible on request.inspection possible at any time by appointment.further information on request.over 5000 linear metres of pallet racks from numerous manufacturers in stock. (Changes and mistakes in the technical data, data and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT ex stock) Purchase / sale We are looking for, or constantly offer numerous items from various areas broom-clean business clearance business closures quick - flexible - ready for action! We also clear and or dispose of for liquidators. Write to us with some keywords and we will get back to you as soon as possible. To get to our site, please click on our logo! Ksdpfxsd S S N Rj Aqvolt

Condition: good (used), Universal punching machine Dimensions: 145x120x210 cm LxWxH Kedpfx Aqoiki Dbsvslt

Condition: used, Year of construction: 2017, functionality: fully functional, Universal Robots Cobot UR5 robot, complete set 5/2017 Year of manufacture: 5/2017 Number of axes: 6 Max. payload: 5 kg Max. working range: approx. 850 mm Scope of delivery: robot, controller, cables, teach pendant Kljdpfx Aey Rlv Eeqvot In addition, spare parts are constantly available from stock. The robot is fully operational and can be inspected. 2-week commissioning warranty. No further guarantee.

Condition: used, Year of construction: 2017, functionality: fully functional, Cobot Universal Robots UR10 CB3.1 Year of manufacture: 07/2017 Kledpfx Aqey Rlb Ievot Number of axes: 6 Max. payload: 10 kg Max. working range: approx. 1300 mm Scope of delivery: robot, controller, cables, teach pendant Spare parts are always available from stock. The robot is fully operational and can be inspected at any time. 2-week commissioning warranty. No further guarantee.