Used Cfs Thermoformer for sale (436)

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Tjdpfx Aozka Rujntjb Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 302/0252, Used CFS CUTMASTER cutter from 2010. For videos and more information, please contact me. Tedpfszaaw Usx Anteb

Condition: excellent (used), Year of construction: 1999, CFS 620 | Thermoforming Packaging Machine Brand: CFS Model: 620 Machine number: 625/0118 Year of manufacture: 1999 Power supply: 230 V, 3 phase, 50 Hz Current consumption: 23/25 A Module dimensions: Main module: 3350 mm x 1300 mm x 1900 mm Additional module: 3300 mm x 1050 mm x 1100 mm The industrial CFS 620 thermoforming machine is an advanced unit designed for the automatic forming of packages from rigid or flexible film and for packaging food and technical products. The machine operates in a continuous cycle, performing the processes of lower film forming, filling, vacuum or protective gas flushing, sealing, and cutting of finished packs. Thanks to its modular design with a total length exceeding 6 meters, the unit offers a large loading area and high production efficiency. Tsdpfx Asy Hl Ndonteb

Condition: excellent (used), Complete slicing & packing line from CFS & Variovac consisting of 1x CFS Uni slicer whit scale and outfield conveyor, 1x Variovac Primus thermoformer whit 2x tools No 1. 1:2 277 x 177 mm Maximum deep 110 mm made for Swedish Wallet packets. No 2. 1:3 202 x 111 mm Maximum deep 110 mm. The line is fully complete and there is a knife sharpener including for the slicer. Convenience Food Systems automatic slicer line, consisting of: type: UNI-SLICER, number: 450.2251, year of construction: 2004, plastic belt, belt width: 230 mm, clearance: 260 mm x 140 mm, diameter knife: 420 mm, slicer dimensions: 2550 mm x 880 mm x 2170 mm. Dividing belt, wire belt, belt width: 270 mm, dimensions: 850 mm x 610 mm x 1110 mm. Check weigher, type: CW2000MK3 091.1992, year of construction: 2004, plastic belt, belt width: 275 mm, dimensions: 700 mm x 780 mm x 1100 mm. Outfeed belt, type: ATB 791 991.1994, plastic belt, belt width: 400 mm, dimensions: 3030 mm x 900 mm x 1260 mm. Knife sharpener, Tsdpfexl Tziox Antob

Condition: used, Consisting of: “Thermopac - WANSON” thermic oil installation Type 200B 10 FT container natural gas burner power: 233 kW 3 x 400 V, 50 Hz 7.5 kW dimensions (L x W x H): ± 3,000 x 2,450 x 2,600 mm + Thermal oil pump Bathyscaphe Flue gas exhaust stack + “GEA-CFS” fryer Type BR 6000/600 all stainless steel suitable for thermal oil heating infeed height : ± 900-950 mm outfeed height : ± 1.150 mm max. oil level above the belt : 120 mm suitable for fire protection with top hold down belt Oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with electrical hoists dimensions (l x w x h) : ± 8.700 x 2.200 x 3.800 mm “Saval” fire suppression system + Paper filter Type OMR 120-60 50 Hz - 400 V 4.5 kW 525 kg dimensions (L x W x H): ± 2.800 x 1.700 x 2.200 mm + Cooling conveyor with ambient temperature all stainless steel Tsdpfx Anjzxdkzoteb variable speed 50 Hz, 400 V 2.61 kW net conveyor length ± 6.000 mm net conveyor width ± 900 mm wire mesh belt (3 mm) dimensions (L x W x H): ± 7.600 x 1.700 x 2.000 mm

Condition: used, cooking length ± 13.000 mm belt width 600 mm all stainless steel with electrical hoist steam heated (steam generator not included): 780 kg/h (6bar) temperature distribution in 2 zones Tsdpfjzxq Aksx Antjb dimensions (l x w x h) : ± 14.400 x 2.000 x 2.700 mm adjustable speed

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm 270 kW, 411 amp canopy with electric hoists with a fine-mesh band Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 9.000 x 2.600 x 3.700 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller Tedpfjzxn I Rex Antjb New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New electrical heating elements: New folded heating resistances Completely new wiring Electrically tested, heated through, and measured

Condition: used, all stainless steel water circulation net belt length 9.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 11.500 x 1.600 x 3.000 mm + "IGEFA" tube heat exchanger Type 161U-159-159 380 kW + Conveyor belt with flights belt width: 800 mm Tsdszxqvqopfx Antjb distance between flights: 190 mm height of flights: 50 mm

Condition: excellent (used), Year of construction: 2004, Used CFS FRESHGRIND 200 grinder for sale. Tedpfxjzmwk Ro Antob Equipped with a loading device. Please let me know if you are interested.

Condition: used, Manufacturer: CFS Model: BR6000/600 Year: 2001 Condition: Used Serial Number: 1402 Stock Number: 3426B Belt width: 600 mm Belt: Eyelink belt for extra small products Frying length: 6000 mm Heating: Thermal oil Power: 3 x 400V, 50Hz, 8.6kW Dimensions: 8700 x 2200 x 3800 mm Weight: 4250 kg CFS oil filter Type: OMR120 Serial number: 60 Year of construction: 2005 Dimensions: 2750 x 1100 x 1700 mm Power: 3 x 380V, 50Hz, 4.5kW Weight: 525 kg Including pallet filterpaper Tedpfx Aezw Dzwsntsb NN ambient cooling conveyor Belt width: 950 mm Belt length: 6000 mm Belt: eye link belt of 3 mm Compressed air: 6 Bar Power: 3 x 380V, 50Hz, 2.7kW Dimensions: 7600 x 1700 x 2000 mm Variable speed control Wanson Themopac thermic boiler Type: 200B Serial number: 9335.56445 Year of construction: 1986 Heating: natural gas Heating power: 233 kW Power: 3 x 380V, 50Hz, 7.5kW Dimensions: 3000 x 2450 x 2600 mm Installation built into 10ft container

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CFS EcoCut Cap 2 | Emulsifier / In-line micro-cut chopper Manufacturer: CFS Model / Type: ECOCUT CAP 2 Serial number: 5000068187 POS 31 Year of manufacture: 2011 Power supply: 400 V / 3 phases / 50 Hz Rated current: 358.5 A Rated motor power: 204 kW Overall dimensions: 3300 × 2050 × 2850 mm Includes a pallet box with parts. The CFS EcoCut Cap 2 is an advanced, extremely powerful industrial emulsifier (in-line micro-cut chopper) manufactured under the CFS brand. This 2011 model is designed for continuous operation in high-capacity production lines, where it is crucial to obtain a perfectly smooth, stable emulsion and maximize the particle size reduction of the raw material. Todpfx Ajy Ub E Dentjb Equipped with a giant 204 kW motor operating at 358.5 A, this emulsifier easily handles the most demanding tasks, ensuring excellent disruption of protein and fat structures. It is an indispensable piece of equipment in the production of high-quality sausages, frankfurters, pates, mortadella, as well as in the pet food industry and in the production of ready meals and sauces. Key features and advantages: - Unmatched power (204 kW): The large power reserve allows for stable, multi-hour operation at maximum throughput, without the risk of overloading the drive, even with very dense product feeds. - Advanced Micro-Cut system: The in-line cutting system guarantees precise, repeatable cutting and homogenization. It enables the achievement of an ideal degree of emulsification, which improves the binding of water and fat, increasing efficiency and enhancing the texture of the finished product. - Automation and integration: The EcoCut Cap 2 model works perfectly in an automated process line, directly with mixers or kneaders, eliminating the need for manual transport of the raw material and accelerating the production cycle.

Condition: used, all stainless steel nett belt length 4.500 mm nett belt width 600 mm overall dimensions (l x w x h) : ± 7.400 x 1.900 x 3.150 mm suitable for thermic oil heating (= 214 kW) with top hold down belt Tsdpfezxdq Uex Anteb adjustable speed sediment removal system electrical hoists

Condition: used, all stainless steel electrically heated heating separately adjustable in two areas Tjdpszxdn Tefx Anteb adjustable speed belt width 600 mm hood with electromechanical lifting system Suitable for steam injection (to heat up and to improve product yields) 180 kW / 275 A suitable for CIP cleaning system with extra infeed en outfeed conveyor outside dimensions (l x w x h) : ± 9.500 x 1.900 x 3.700 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 23900101, Equipment: type plate available, PACKAGING MACHINE FOR FOOD PRODUCTS SUCH AS MEAT, COLD CUTS, CHEESE, IN FILM PACKAGING UNDER VACUUM OR IN INERT GAS. THE MACHINE HAS FIVE FORMATS. I HAVE A LARGE SET OF SPARE PARTS FOR THE MACHINE: KNIVES, SEALS, VALVES, ETC. Tsdpfxjw Emh Eo Antob

Condition: excellent (used), Year of construction: 2016, Uniform breading with minimal flour consumption The GEA OptiFlour II 600 flour coater is a machine designed for the precise and uniform application of flour, breading, or seasonings to food products prior to further processing. The machine utilizes GEA’s patented dosing technology, which is highly regarded in the industry for its high repeatability of product coating while minimizing coating material consumption. Technical Specifications of the GEA OptiFlour II 600 Coater Todpfx Aszmhk Ujntob Manufacturer: GEA Food Solutions Bakel B.V. Model: GEA OptiFlour II 600 Year of manufacture: 2016 Conveyor belt width: 600 mm Conveyor belt speed: 2.5–25 m/min Minimum product height: 16 mm Maximum product height: 70 mm Dimensions (L x W x H): 2700 x 1740 x 1950 mm Power supply: 380–415 V, 3-phase, 50–60 Hz Power: 5.3 kW Current consumption: 13 A How does the GEA OptiFlour II 600 breading machine work? The product is conveyed on a patented vibrating belt (shaker belt), onto which flour is continuously fed in small doses, creating a uniform layer of controlled thickness. The patented flour divider ensures repeatable, adjustable material feed from both the top and bottom of the product, and the integrated anti-caking system prevents contaminants from entering the breading layer. An adjustable scraper bar prevents flour from sticking to the conveyor belt, while optional pressure rollers allow for control over how tightly the coating adheres to the product’s surface. All machine settings can be adjusted externally while the line is in operation, and a transparent hopper facilitates real-time monitoring of the flour level by the operator. Key advantages of the GEA OptiFlour II 600 breading machine The patented dosing system ensures the most uniform distribution of flour on the product, which results in consistent coating quality and reduced coating material waste during production. The machine’s enclosed design minimizes flour dust in the production hall, and the unit can also be integrated with the GEA OptiAir system, enabling dust-free operation. The absence of loose structural components significantly simplifies machine cleaning and maintenance, reducing sanitation-related downtime, while the robust construction ensures reliable operation under continuous industrial use. The 600 model handles a wide range of coating materials—from fine pre-dust, through grain-based coatings, to light and medium-weight breadcrumbs, as well as sticky, seasoned coating mixtures. Applications of the GEA OptiFlour II 600 Coater The GEA OptiFlour II 600 coating machine is used in production lines at meat, poultry, and fish processing plants wherever it is necessary to evenly coat the product with flour, breading, or seasonings prior to further processing steps—such as the actual breading, frying, or freezing. The unit works well as part of a breading line, integrating with breadcrumb coaters and dust extraction systems.

Condition: excellent (used), Year of construction: 2011, We offer a used GEA-CFS TwinGrill TWG 1800/600 — an industrial machine designed for continuous grilling, toasting, and thermal processing of a wide range of food products. The machine is ideal for meat, poultry, and fish processing plants, as well as facilities producing convenience foods, ready-to-eat meals, and semi-finished products that require consistent and controlled heat treatment. The GEA-CFS TwinGrill TWG 1800/600 model is designed as a continuous grilling line made of stainless steel. The unit utilizes a dual grilling system with independently adjustable upper and lower heating zones. The temperature of the upper and lower grills can be adjusted separately, allowing for precise adaptation of the process to the type of product, its thickness, texture, and the desired final result. The machine allows products to be grilled on both sides, ensuring uniform cooking results, an attractive surface appearance, and consistent quality across successive production batches. A temperature range of 50 to 260°C and an adjustable belt speed ranging from 0.3 to 3 m/min allow the grilling time to be tailored to various food products. The TwinGrill is equipped with an intuitive control panel and a user-friendly interface that simplifies operation, process monitoring, and the setting of operating parameters. The ability to create and adjust processing programs allows for better control over the cooking and grilling process, as well as increased production consistency. Thanks to its hygienic design, high-quality stainless steel construction, and belt-cleaning system, the unit is easy to clean and suitable for use in the food industry. Additional features, such as removable grill plates and grease collection systems, facilitate routine maintenance and keep the unit clean. The GEA-CFS TwinGrill TWG 1800/600 is a versatile solution for grilling meat, poultry, fish, vegetables, formed products, burgers, cutlets, and ready-to-eat convenience foods. The machine can operate as a standalone unit or as part of a larger production line, e.g., following forming, marinating, breading, or preliminary processing of the product. Technical specifications: Manufacturer: GEA CFS Bakel B.V. Model: TWG 1800/600 Type: TwinGrill / industrial double-sided grill Machine number: 662 Year of manufacture: 2011 Net working length: 1800 mm Conveyor belt width: 600 mm Power supply: 400 V Phases: 3 Ph Todpfjzicutjx Antob Frequency: 50 Hz Installed power: 97 kW Heating power: 93 kW Temperature range: 50–260°C Belt speed / grilling time: 0.3–3 m/min Belt cleaning system: included Construction: stainless steel Weight: approx. 2250 kg Applications: grilling burgers grilling cutlets and formed products processing poultry fillets production of grilled meat products processing fish products grilling vegetables production of ready-to-eat meals production of convenience foods Lines for grilled, roasted, and cooked products Meat, poultry, and fish processing plants Large-scale food service and catering production

Condition: used, Year of construction: 2001, Manufacturer: CFS Model: BR6000/600 Year: 2001 Condition: Used Serial Number: 1381 Stock Number: 3317J Belt with: 600 mm Frying length: 6000 mm Heating: thermal oil, 388 kW Todpfx Anezwnb Istjb Frying time: 25 - 250 sec Compressed air: 4 - 6 Bar Power: 3 x 415V, 50Hz, 8kW Dimensions: 8700 x 2300 x 3900 mm Weight: 4250 kg Teflon infeed, separate infeed conveyor, hold down belt, circulation pump, oil level control, sediment removal, electrical hoists, prepared for CO2 fire extinguisher

Condition: used, Year of construction: 2005, We offer this used machine – CFS 1000S Bin and Crate Tipper for meat processing, year of manufacture 2005. Todpfx Anoyr I Dyetsb Model: 1000S Year of manufacture: 2005 Serial number: 11302 If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, The machine is ready for operation after the inspection. Todszcvqiopfx Antjb

Year of construction: 2019, condition: like new (used), Thermoformer Designed for pharmaceutical environments, it can thermoform trays for vials, ampoules, syringes, and medical devices in general, using thermoformable films such as PVC, PET, R-PET, Polystyrene (PS), PP, PLA, etc. Possibility to cold-form Aluminium based materials. Main Features: Balcony structure for easy access and cleaning High-speed positive automatic product feeding systems Tsdpfoybcwtsx Anteb Available with or without a sealing station Arrangeble for in-line connection Quick, repeatable, and tool-free format change Thanks to the servo-assisted main transmission, the machine speed is adjustable from the main HMI within dedicated recipes Automated thermoformer machine. Forming material reel unwinding - preheating - forming - filling with laminated strips (robot) - applying and sealing tyvek lid - cooling - serialised printing - indexing - punching - feed sealed strips out to box packaging machine.

Condition: used, all stainless steel Todpfxjzwdb Do Antob mobile adjustable speed belt width 600 mm with air knife dimensions (l x w x h) : ± 3.250 x 1.000 x 2.000 mm

Condition: used, belt width 400 mm all stainless steel adjustable speed with lower and upper belt adjustable upper belt with outfeed belt with air knife dimensions (l x w x h) : ± 2.500 x 900 x 1.400 mm mobile 4,45 kW Tsdpfx Aezv Rp Eontjb

Condition: used, all stainless steel Tjdpfx Anezv Rpljtob with top hold down belt water circulation net belt length 8.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm

Condition: used, all stainless steel 3 tiers nett belt length ± 5.800 mm Tsdpfszwlqgjx Antob nett belt width ± 940 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 7.200 x 1.400 x 2.900 mm + Evaporator "Goedhart B.V." Type LLK.s 411m² manufacturing number: PJV100282 Year of manufacture: 2010 Capacity: 135 dm³ Refrigerant: NH3 Weight: 770 kg, Working pressure: 22 bar Test pressure: 32 bar Overall dimensions including cooling panels and stainless steel door: 7.500 x 2.700 x 3.300 mm

Condition: like new (used), Cutter CFS GEA CutMaster 500 VACUUM After capital renovation 3 months warranty for parts Tjdpfsyn Dy Nsx Antsb