Used Chainflex Signal Cable for sale (5,777)

Condition: used, Functionally tested; item originates from the dismantling of equipment from an automotive supplier. Nodpfx Aszmm Nisgrodb Manufacturer: Igus Type: i6FX8002-5DQ38 Description: Chainflex signal cable from Igus, suitable for Siemens controllers. Specifically designed for moving applications and energy chains, offering a long service life.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. Njdez Agv Uspfx Agredb - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. Nsdpfsz Agw Ejx Agrsdb - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity Nodoz Ag Rrepfx Agrodb - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible Ndjdszz Rpcjpfx Agreb - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: excellent (used), Keysight / Agilent InfiniiVision MSO-X 3034A Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device Type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz For sale is a used Keysight / Agilent InfiniiVision MSO-X 3034A Mixed Signal Oscilloscope. This oscilloscope is suitable for precise signal and measurement tasks in development, laboratory, service, training, research, as well as industrial electronics and quality assurance. With 4 analog channels, 16 digital channels, and a maximum sampling rate of 4 GSa/s, the device offers versatile applications for demanding measurement tasks. Technical Data Manufacturer: Keysight Technologies / Agilent Technologies Series: InfiniiVision Type: MSO-X 3034A Device Type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog Channels: 4 Digital Channels: 16 Max. Sampling Rate: 4 GSa/s Display: Color display MegaZoom Technology Inputs: 4 × BNC analog Logic/Digital Input USB Host USB Device Trigger Out External Trigger / Calibration Connector Power Connection: 100–240 V AC Frequency: 50 / 60 Hz Power Consumption: max. 100 W Dimensions (W × H × D): approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels MegaZoom Technology USB Host USB Device Trigger and analysis functions Measurement, storage, and printing functions Carrying handle 3 probes as shown in the pictures Power cable Accessories as shown in the pictures Application Areas Electronics development Laboratory Service Troubleshooting Signal analysis Printed circuit board testing Training Research and development Quality assurance Industrial electronics Ndjdpfx Aozh I Dwegrjb Scope of Delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3 probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used. Optical condition as shown in the pictures. Inspection seals/stickers as shown in the pictures are present. Scope of delivery as described and shown in the pictures. Subject to changes, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 235.1068, Title: Komax Kappa 235 Automatic Wire Cutting and Stripping Machine – 2006 Description: For sale: Komax Kappa 235 automatic wire cutting and stripping machine, manufactured in 2006. Njdezzpxcopfx Agrjdb The machine is suitable for cutting and stripping a wide range of cables and wires. Technical specifications: Manufacturer: Komax Model: Kappa 235 Year of manufacture: 2006 Voltage: 115/230 V Wire cross-section range: 0.22–35 mm² Flat cable processing: up to 40 mm width RS232 interface Cutting and stripping functions Extensive accessories and spare parts are included: Numerous cutting and stripping blades / knife sets V-blades Various blade holders Elastomer feed rollers Additional steel knurled feed roller set Various cable guides Guide tubes Inner-wire stripping unit Length measuring unit Additional mechanical parts and accessories Various original Komax spare parts A considerable quantity of tooling, blades, rollers, and spare parts is supplied with the machine, as shown in the photos.

Condition: excellent (used), Vötsch VT 7012 S2 Temperature Shock Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7012 S2 Machine Type: Temperature Shock Test Chamber / Shock Test Chamber Ndsdpfx Aoz Ehrgogrjb For sale is a used Vötsch VT 7012 S2 temperature shock test chamber with hot and cold chambers, as well as a motorized moving test platform. The system was developed for professional temperature cycling and temperature shock testing and is suitable for material testing, electronics and component testing, research and development, and quality assurance. Technical data: Temperature range, hot chamber: +50 °C to +220 °C Temperature range, cold chamber: -80 °C to +70 °C Temperature deviation, time-related: ±1.0 K Temperature deviation, spatial: ±2.0 K Heating rate, hot chamber: approx. 11.0 K/min Cooling rate, cold chamber: approx. 3 K/min Heating rate, cold chamber: approx. 2.0 K/min Test chamber dimensions (W × H × D): 470 × 410 × 650 mm Cable gland: Ø 67 mm Load between the shelves: max. 40 kg Total load of the moving platform: max. 20 kg Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A On-site fuse: 32 A slow-blow Compressor power: 2 × 3 kW Dimensions: External dimensions (W × D × H): approx. 975 × 2,115 × 1,675 mm Test chamber dimensions (W × H × D): 470 × 410 × 650 mm Weight: approx. 1,000 kg Equipment: Hot chamber Cold chamber Motorized moving test platform Programmable controller Manual operation Automatic operation Shock test operation Observation window Test chamber lighting Cable gland Ø 67 mm Water-cooled design Operator terminal Signal light Transport data: Machine (W × D × H): approx. 975 × 2,115 × 1,675 mm Weight: approx. 1,000 kg Condition: Used Optical condition according to the pictures. Scope of supply: Vötsch VT 7012 S2 temperature shock test chamber Operator terminal Original operating manual Accessories according to the pictures Availability: upon agreement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Vötsch VT 7012 S2 Temperature Shock Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7012 S2 Machine Type: Temperature Shock Test Chamber / Shock Test Chamber For sale is a used Vötsch VT 7012 S2 temperature shock test chamber with a hot and cold chamber, as well as a motorized moving platform. The system was developed for professional temperature cycling and temperature shock testing and is suitable for material testing, electronics and component testing, research and development, and quality assurance. Technical Data: Temperature range, hot chamber: +50 °C to +220 °C Temperature range, cold chamber: -74 °C to +70 °C Temperature deviation (time): ±1.0 K Temperature deviation (spatial): ±2.0 K Heating rate, hot chamber: approx. 11.0 K/min Cooling rate, cold chamber: approx. 3 K/min Heating rate, cold chamber: approx. 2.0 K/min Test chamber dimensions (W × H × D): 470 × 410 × 650 mm Cable gland: Ø 67 mm Load between the shelves: max. 40 kg Total load of the moving platform: max. 20 kg Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A Fuse (on-site): 32 A slow-blow Compressor power: 2 × 3 kW Dimensions: External dimensions (W × D × H): approx. 975 × 2,115 × 1,675 mm Test chamber dimensions (W × H × D): 470 × 410 × 650 mm Weight: approx. 1,000 kg Equipment: Hot chamber Cold chamber Motorized moving platform Programmable controller Manual operation Automatic operation Shock test operation Observation window Test chamber lighting Cable gland Ø 67 mm Water-cooled version Operator terminal Signal light Transport data: Machine (W × D × H): approx. 975 × 2,115 × 1,675 mm Weight: approx. 1,000 kg Condition: Used Optical condition as shown in the pictures. Scope of supply: Njdpsz Ehuuofx Agrodb Vötsch VT 7012 S2 temperature shock test chamber Operator terminal Original operating manual Accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Schleuniger UniStrip 2100 – Automatic Wire Stripping Machine Nsdpjz A D Thefx Agredb For sale is a Schleuniger UniStrip 2100 automatic wire stripping machine. The machine is in very good working condition and fully operational. All functions operate correctly, and the machine is ready for immediate use. Technical details: Manufacturer: Schleuniger AG Model: UniStrip 2100 / US 2100 Serial No.: 1770-2004 Power supply: 24 VDC Power consumption: 41 W Made in Switzerland CE certified Condition: Used Functionality: Fully functional The machine can be inspected and tested before purchase. Price: €1,000 Location: Hungary

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork carriage adjustment range: 350–1,050 mm Fork length: 1,200 mm Nodpfxozz Hp Se Agrodb MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT 3rd and 4th valve Formerly a Linde full-service machine Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157

Condition: used, mileage: 755,023 km, power: 375 kW (509.86 HP), first registration: 05/2014, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 8x4, wheelbase: 37,000 mm, fuel: diesel, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 2, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, power mirror, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Speed limiter - Air horn - Particle filter - Power take-off (PTO) - Radio - Rotating lights - Reversing camera Ndsdjz D Tq Sjpfx Agreb - Sun visor - Toolbox - Tow hitch = Notes = Cable system NCH System length: 670 cm Height: 140 cm Locking bar: 70 cm Hub reduction NATO connector Duomatic Clang Turn signals Cruise control Fog lights Bumper Air conditioning Reversing camera = Additional Information = General Information Model year: 2026 License plate: 12-BDV-3 Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Axle Configuration Axle brand: Anders Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Max. axle load: 10,000 kg; Steerable; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Parabolic spring Rear axle 1: Tire size: 315/80 R22.5; Dual tires; Max. axle load: 9,500 kg; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60%; Reduction: External planetary axles; Suspension: Air suspension Rear axle 2: Tire size: 315/80 R22.5; Dual tires; Max. axle load: 9,500 kg; Tire tread depth left inner: 55%; Tire tread depth left outer: 55%; Tire tread depth right inner: 55%; Tire tread depth right outer: 55%; Reduction: External planetary axles; Suspension: Air suspension Rear axle 3: Tire size: 380/65 R22.5; Lift axle; Max. axle load: 8,000 kg; Steerable; Tire tread depth left: 25%; Tire tread depth right: 25%; Suspension: Air suspension Weights Unladen weight: 13,350 kg Payload: 23,650 kg GVW: 37,000 kg Interior Interior: gray Maintenance APK (Periodic Motor Vehicle Inspection): valid until 05/2027 History Number of owners: 1 Condition Overall condition: average Technical condition: average Optical condition: average Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: new, maximum load weight: 37,495 kg, overall weight: 41,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis A 100.121 Double T-longitudinal members welded to cross members, front construction height: approx. 147 mm (incl. fifth wheel plate) A 100.260 Chassis version 'Compact rear' A 100.026 Interchangeable 2 kingpins, 1 position: front overhang: approx. 570 mm A 100.164 Fixed rear impact protection, externally, in steel design A 100.390 Container supports as rectangular tubes, approx. 200 x 120 x 8 mm thick, reinforcements on the approach angle A 100.004 Rear underrun protection device according to EC Directive A 100.072 Lateral protection device according to EC Directive A 100.378 Lateral protection device approx. 460 mm high A 420.001 Quick-Lock complete equipment - Locks at every possible position - Locks are theft-proof A 038.001 Container locks for accommodating the following containers: 1 x 20' container, flush with the rear A 046.000 Length from kingpin to rear edge of vehicle: approx. 6,620 mm Support device B 028.001 Two mechanical support winches, 2 x 12 t, semi-circular with base plate, manufacturer: Jost B 001.000 Operation of the support winches on one side, on the right side Axles/Aggregate C 000.004 3 axles, each with a load-carrying capacity of 9,000 kg C 100.020 Wheelbase: approx. 1,410 / 1,310 mm C 075.600 KRONE axles with air suspension and disc brake, ET 120 C 143.028 Aggregate distance = approx. 4,625 mm Ndjdoz Dmnqspfx Agreb C 075.950 Brake disc with approx. 430 mm diameter C 142.010 Load-dependent, fully automatic, electronic lift axle control for the 1st axle C 148.010 Manual function on the control panel for forced lifting (= driving assistance acc. to Directive 97/27/EC) and forced lowering via a rotary button C 148.030 Preparation of the lift/trailing axle(s) for operation from the towing vehicle (without installation in the towing vehicle), according to the selected connector(s) for light, for control via: *Contact 6 of the 7-pole auxiliary connector - ISO 3731 and/or *Contact 12 of the 15-pole connector - ISO 12098 and/or *Contact 8 A of the VBG connector C 043.110 With lifting and lowering device, incl. automatic ride height adjustment Tires (rims) D 400.000 6-fold, 385/65 R 22.5 - manufacturer according to manufacturer's choice D 185.100 Without spare wheel D 130.076 Profile: M+S (Mud + Snow) D 500.130 KRONE Smart Tyre Monitoring acc. to ECE R141 Determination of tire pressure and temperature D 500.121 KRONE TPMS control unit D 500.128 Without connect function in the TPMS control unit Mudguards F 002.010 Plastic wheel cover F 010.001 Splash guard according to EC Directive Brake G 000.103 Braking system according to ECE Regulation 13 (incl. vehicle stabilization function) G 082.000 Spring brake parking brake G 102.010 Diagnosis via ISO7638 connector (EBS supply cable) G 079.002 Brake line connections below the top edge of the beam G 066.101 prepared for KRONE Telematics Dry G 040.000 2 chocks with holder G 071.000 Standard air connections ISO 1728 (Palm) G 064.000 Aluminum air tank G 088.550 Braking system: Wabco Premium G 088.500 Caution: The trailer may only be towed by tractor units which ensure the effectiveness of the ABS! G 085.100 EBS system, 2S/2M, 2 sensors on one axle Light H 000.001 Lighting and light signaling device acc. to UN ECE Reg. No. 48 H 070.005 2 outline lights with rubber arm, LED version H 071.011 LED side marker

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, For sale is a machinery package consisting of 10 robot arms from the manufacturer ABB, along with the necessary accessories! The package is composed as follows: 8x Welding robots for external connection 2x Handling robots 10x Control cabinet 10x Main power cable for robot cabinet 10x Communication cable for robot cabinet 10x Panel with connection cable to the cabinet 1x 40" HC sea container TECHNICAL DETAILS Reach: 2.55 m Handling capacity: 235 kg Center of gravity of the payload: 300 mm Wrist torque: 1,324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm MACHINE DETAILS Control cabinet type: IRC5 M2004 Operating panel: FlexPendant Operating panel model: DSQC 679 Input voltage: 3 × 400 V AC Frequency: 50–60 Hz Current consumption: 20 A Operating hours: between 28,500 and 39,000 hours EQUIPMENT Cable set for main connection cabinet–robot Leoni mounting Cable set for handling or welding Note regarding dismantling and loading: As can be seen in the pictures, the manipulators are located in the 40" HC container. The robots are screwed onto the pallets (with 2 screws each), and the control cabinet is secured to the pallet with lashing straps. Further securing/lashing must be carried out by the buyer. Njdez D H Hyopfx Agredb

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, LOT scope: 3x welding robots for external connection 2x handling robots 5x control cabinets 5x main power cable for robot cabinet 5x communication cable for robot cabinet 5x panel with supply line to the cabinet Operating hours: between 28,500 and 39,000 hours Manufacturer: ABB Model: IRB 6640-235/2.55 Type: IRB 6640 M2004 Reach: 2.55 m Handling capacity: 235 kg Center of gravity of payload: 300 mm Wrist torque: 1324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm 3x 400V AC 50-60 Hz 20 A Accessories: Control cabinet: Type: IRC5 M2004 Operating panel: FlexPendant Model: DSQC 679 Cable set: Main connection cabinet to robot Ndjdpfxjz D H Dre Agrob Leoni add-on: Cable set for handling or welding

Condition: used, mileage: 29,990 km, power: 125 kW (169.95 HP), color: white, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you, Tel: Ndedpfx Aszzla Njgreb BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CL1 Steering wheel adjustable in inclination and height, CT1 Vibration damper, CW2 Deletion of vehicle lowering, D03 High roof, D50 Full-height partition, E07 Hill start assist, E1B Smartphone storage compartment incl. wireless charging, E1D Digital radio (DAB), E1E Navigation, E3M MBUX multimedia system with 7-inch touchscreen, E46 Socket in the cab, E57 Electrical system for trailer socket, ED4 Fleece battery 12 V 92 Ah, ED8 Pre-wiring for electrical system, parameterizable special module, EE5 Ultracap automatic transmission locking, ES5 Charging package for instrument panel, EW6 Pre-wiring for Remote Services Plus, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F64 Electrically foldable exterior mirrors, F68 Heated and electrically adjustable exterior mirrors, FF4 Storage compartment above the roof liner, FF5 Storage compartment above the windshield, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under the cockpit, FU5 Exterior mirrors without indicators, FZ5 Anti-theft and burglary alarm system, G43 9G-TRONIC, GA7 Automatic transmission with torque transfer of 700 Nm, H15 Seat heating for passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 Semi-automatic TEMPMATIC climate control system, IL5 Left-hand drive, IR4 Wheelbase 3665 mm, IT4 3.5-ton vehicle, J10 Speedometer km/h, J55 Seatbelt warning system for passenger seat, J58 Seatbelt warning system for driver seat, J65 Outside temperature display, JA8 Crosswind assist, JB6 Parking package with 360° camera, JH3 Communication module (LTE) for digital services, K51 Protection against incorrect fueling, KB7 Main tank 93 liters, KP7 SCR exhaust gas purification system Generation 4, L LEFT-HAND DRIVE, L13 Fog lamps with cornering light, L44 Turn signal lamps on the front side, L65 Ceiling light(s) in the LD/FG compartment with door contact, L71 Load compartment lighting via motion sensor, L94 Deletion of parking lights, LA2 Driving light assistant, LB1 Side marker lights, LB5 3rd brake light, LC4 Comfort roof control unit, LE1 Adaptive brake light, M60 Generator 14 V / 250 A, M72 Vehicle capable of running on HVO, MJ8 ECO start-stop function, MS1 Cruise control, MT6 Emission class Euro 6d N1, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800/min, Q11 Longitudinal member reinforcement, Q67 Towing eye at the rear, RS3 Steel wheels 6.5 J x 16, S22 Armrest for driver's seat, S23 Passenger seat, double seat, SA5 Airbag driver, SB1 Comfort driver's seat, SK2 Driver's seat occupancy recognition, T16 Sliding door right, T75 Grab handles for entry of driver and passenger, T77 Grab handle for entry of load compartment sliding door at partition, T85 Entry handle on rear corner pillar left, T86 Entry handle on rear corner pillar right, V3L All-weather floor mats, V42 Lashing rails on side wall at anchor strap, V43 Wooden floor, V52 Wheel arches can be loaded, V94 Cable duct on side wall, V95 Cable duct on rear portal, VA2 Interior lining of load compartment up to roof height (wood), VC4 Lashing rails on side wall at roof frame, VF7 Fabric Maturin black, VV2 Cargo securing rail system, W54 Rear doors, double-leaf, opening up to the side wall, W73 Step on rear door We will be happy to

Condition: used, mileage: 71,700 km, power: 125 kW (169.95 HP), color: white, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure that you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you, Tel: Ndedpfxjz Anf Dj Agrob A50 Front axle with increased load capacity, AR2 Axle ratio i = 3.923, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CB7 Stabilization Level I, CL1 Steering wheel adjustable in inclination and height, CT1 Vibration damper, CW2 Deletion of vehicle lowering, D03 High roof, D50 Continuous bulkhead, E07 Hill start assist, E1D Digital radio (DAB), E1E Navigation, E1U USB socket 5 V, E43 Trailer socket 13-pin, E46 Socket in the cab, E7M MBUX Multimedia System, ED4 Fleece battery 12 V 92 Ah, EE5 Ultracap locking for automatic transmission, ES0 Jump start contact, ES5 Charging package instrument panel, F1K Coat hooks in the cab, F2W Winter package, F64 Exterior mirrors electrically foldable, F68 Exterior mirrors heated and electrically adjustable, FF5 Storage compartment above windshield, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under cockpit, FKA VAN, FM3 WET WIPER SYSTEM, FU5 Exterior mirrors without turn signal, G43 9G-TRONIC, H15 Seat heating for front passenger, H16 Seat heating for driver, H21 Heat-insulating glass with band filter in the windshield, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IL5 Left-hand drive, IR6 Wheelbase 4325 mm, Overhang 1615 mm, IT4 3.5-ton vehicle, J10 Speedometer km/h, J55 Seatbelt warning system for front passenger seat, J58 Seatbelt warning system for driver's seat, J65 Outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JI7 Start-up distance, maintenance interval 60,000 km, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, KB7 Main tank 93 liters, L44 Direction indicator lamps on the front side, L65 Ceiling light(s) LD-/FG-compartment with door contact, L71 Load compartment lighting via motion detector, L94 Deletion of parking lights, LA2 Driving light assistant, LB1 Side marker lights, LB5 3rd brake light, LC2 LED light band in the load compartment, LE1 Adaptive brake light, LG7 LED High Performance headlights, LX5 Europe, M60 Generator 14 V / 250 A, M72 Vehicle compatible with HVO, MJ8 ECO Start-Stop function, MS1 TEMPOMAT, MT5 EMISSIONS CLASS EURO 6e RDE5 N1, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800/min, P2L Load compartment package 2, Q11 Longitudinal member reinforcement, Q67 Towing eye rear, RY2 Tire pressure monitoring on front and rear axle, wireless, RZ2 Wheels from Magnetto Wheels, S02 Driver's seat, S23 Front passenger seat, two-seater, SA5 Airbag driver, SA6 Airbag front passenger, SK2 Seat occupancy recognition driver's seat, T16 Sliding door right, T75 Grab handles for entry of driver and front passenger, T77 Grab handle for entry of load compartment sliding door on bulkhead, T85 Entry handle on rear corner pillar left, T86 Entry handle on rear corner pillar right, V3L Floor mats all-weather, V42 Lashing rails on side wall at railing, V43 Wooden floor, V52 Wheel arches can be loaded, V94 Cable duct on side wall, V95 Cable duct on rear portal, VA2 Interior paneling of load compartment up to roof height (wood), VC4 Lashing rails on side wall on roof frame, VF7 Fabric Maturin black, VV2 Cargo securing rail system, W54 Rear doors, double-wing, opening to side

Condition: used, mileage: 772,514 km, power: 346 kW (470.43 HP), first registration: 12/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Cab: GX (wide, long, extra-high) * Cab mounting: Comfort * Roof spoiler: Transport position, adjustable * Glass sunroof: Electric * Side flaps: Foldable, right and left * Windshield: Laminated safety glass (VSG), tinted * Windshield washer system: Windshield * Sun visor: Electric for windshield, mechanical for door side windows * Interior color: Moon Grey * Interior styling: Analog color ambiance * Upper bunk: With slatted base, fabric underlay, 70 mm mattress * Lower bunk: With slatted base, fabric underlay, 70 mm mattress * Storage compartment: Rear, left and right, accessible from outside and inside * Refrigerator: Pull-out, central area, rear * Air conditioning: Climatronic, electric auxiliary heater * Water auxiliary heater: 4 kW * Seats: Driver and passenger comfort seat, air-suspended, with lumbar support, shoulder adjustment, seat heating, armrests * Multifunction steering wheel: Height and tilt adjustable * Digital tachograph: Digital, with remote communication (DSRC), CONTINENTAL * Connectivity: Connectivity board module, remote download for tachograph, Toll Collect preparation * FleetBoard ----Safety & Assistance Systems* Electronic Stability Program (ESP) * Anti-Slip Regulation (ASR) * Adaptive Cruise Control (ACC) Stop and Go, distance-regulated * ECO modes for speed control Nsdpfx Agoz Achajredb * Emergency Braking Assist (EBA), non-switchable * Cruise control function MAN EfficientCruise, terrain-dependent * Lane Departure Warning (LDW) * Turning assistant * Full braking assistant * High-performance engine brake MAN EVBec, step-adjustable * Retarder, speed-dependent, step-adjustable * Disc brakes on front and rear axles * Rollaway prevention MAN EasyStart * Brake pad thickness display, with brake pad wear warning ----Lights and Signals * Headlights: H7 * Daytime running lights: LED * Fog lights: H7 * Cornering lights: H7 * Headlight range adjustment: Automatic * Work lights: Halogen, white, rear, bottom, outside * Horn: Two-tone, electric ----Interfaces and Superstructures* Fifth wheel coupling: JOST JSK 42 MK 2 inch, automatic lubrication, extended handle * Fifth wheel trailer brake connection: 2 lines, behind cab * Fifth wheel trailer socket: 24 V, 15-pole * Spiral cable: Electric, for trailer socket ABS, behind cab * Interface for vehicle data (FMS) ----* Engine: Diesel engine MAN D2676 LF79, 346 kW (470 hp), 2,400 Nm torque, Euro 6d * Transmission: MAN TipMatic 14.30 OD, with Retarder 35 * Permissible total weight: 18,000 kg (National), 19,000 kg (Technical/Technical Plus) * Total weight of vehicle train: 40,000 kg (National), 44,000 kg (Technical/Technical Plus) ----Chassis and Axles* Front axle: 8,500 kg, non-driven, angled, steered, non-liftable * Rear axle: 13,000 kg, HY axle without through-drive, straight, non-steered, non-liftable * Suspension: Air/Air (LL) on front and rear axles * Axle ratio: i=2.53 * Differential locks: Driven rear axles * Front axle rims: Steel, 1-piece, 10-hole 11.75x22.5 * Rear axle rims: Steel, 1-piece, 10-hole 9.00x22.5 -----* Tire dimension front axle: 355/50R22.5 * Tire dimension rear axle: 295/55R22.5 * Fuel tank: 960 liters * AdBlue tank: 80 liters * Technical total weight: 19,000 kg * Unladen weight: 8,104 kg * Permissible trailer load: 26,470 kg * Overall length: 5,995 mm * Wheelbase: 3,600 mm ----Vehicle number/Vehicle: 11995----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed.-----We are happy to assist you with all formalities related to the pur

Condition: used, Year of construction: 2025, _____max. load capacity 3,000 kgmax. lifting height 6,700 mmmax. reach 3,800 mmLength to carriage 4,510 mmWidth 2,000 mmHeight 2,120 mmTotal weight with load forks 6,620 kgTotal weight without load forks 6,450 kgEngine 4-cylinder turbo diesel engineRehlko KDI2504 TCRwater-cooledPower 55 kW (75 hp) at 2500 rpmStage VOxidation catalyst (DOC) + diesel particulate filterHydrostatic drivePump: electronically controlled with variable flowMotor: variable displacement motorEPD PLUS incl. with optional automatic speed increaseMineral oil hydraulic fluid HVI 46Transmission 2 gearsElectro-hydraulically controlledVmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/hCab closed cabSplit door360-degree all-round visibilityAdjustable seat with safety lap beltROPS/FOPS Level 2HeaterFront, roof and rear window wipersSun visor4x1 joystick electronic with capacitive release incl. direction switchTelescopic boom 2-part with electronic end-of-travel damping Soft StopCarriage quick-change systemType "ZM2", hydraulically controlled from the cabSteering hydraulic steering3 steering modes:All-wheel drive, front-wheel drive, crab steeringDrive permanent all-wheel driveAxles Front axle fixedRear axle oscillatingBraking system servo-assisted disc brakes on all four drive axles, automatically activatedParking brake when engine is stoppedHydraulic system gear pump and load-sensing valveTotal flow rate: 100 l/minWorking pressure: 210 barElectrical system 12 VBattery with 100 AhAlternator 115 AStability control Simplified Merlo ASCS system (ASCS-light) with full electronic stability control, audiovisual signal, implement recognition and overload shut-offTires 400/70-20, agricultural lug profileStandard equipmentServo brakesRear plate for mounting a trailer hitchV2001 Preparation for additional function on the boom head2 hydraulic connections on the boom headLoad protection grid on the carriageLighting for road travelAutomatic battery disconnect switchElectrical connection cable in the boomAcoustic signal when reversingLifting cylinder support for securingStorage location: null Nodpfx Asz D Rcxsgrjdb

Condition: used, Year of construction: 2012, functionality: fully functional, For sale: Autosplice ACS 2000 Global Splice System, an industrial wire processing/splicing machine. Professional equipment for the series production of electrical wires and connections. The machine uses Autosplice Spliceband technology for creating various wire and component connections. Technical specifications: Manufacturer: Autosplice Europe GmbH Model: ACS 2000 Year of manufacture: 2012 Serial number: 110000450 Power supply: 230 V / 50 Hz Power consumption: 2 A Required compressed air: 6 bar / 87 PSI Weight: 51 kg CE marking The machine is used and is in the condition shown in the pictures. Inspection and testing can be carried out while the machine is powered on. Ndsdpfx Agezx Edporeb Location: 5720 Sarkad, Hungary. Sold by a company, with invoice. For further information, please contact us.

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Nodpfx Aszphdtsgrsdb Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Includes compressed air hose with claw coupling, 10 m The blowing device Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Thrust force 20 daN L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Condition: good (used), Cable stripping machine, cable stripper, cable peeler, cable stripping machine, cable insulation machine, cable recycling plant Nodez Dua Iopfx Agrjdb -Manufacturer: Yngves MEKANISKA AB, cable stripper cable peeler -Type: K74-1 -Motor: ABB 2.2 kW -Dimensions: 1600/1200/H1600 mm -Weight: 314 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 41,622 h, controller model: Siemens Sinumerik 840 D, laser power: 3,000 W, sheet thickness (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale is a TRUMPF TruLaser 5030 fiber (L41) including LiftMaster Compact! The machine will remain powered on until September 23, 2026. Disassembly will be carried out by a certified TRUMPF partner. TECHNICAL DETAILS Laser power: 3,000 W Working area (X / Y / Z): 3,000 × 1,500 × 115 mm Sheet metal thickness steel max.: 15 mm Sheet metal thickness stainless steel max.: 20 mm Sheet metal thickness aluminum max.: 15 mm Simultaneous speed max.: 235 m/min Accuracy: ± 0.1 Sheet metal format max.: 3,000 × 1,500 mm Sheet metal format min.: 1,000 × 1,000 mm Sheet metal thickness max.: 25 mm Sheet metal weight max.: 900 kg Stack height loading side max.: 90 mm Part size min.: 150 × 150 mm Sheet metal thickness max.: 25 mm Sheet metal weight max.: 900 kg Stack height unloading side max.: 250 mm MACHINE DETAILS Control model: Siemens SINUMERIK 840D SL Touch color screen: 17" Operating hours: 81,443 / 76,533 / 41,622 h Dimensions & Weight Dimensions (L x W x H): 9,373 x 2,964 x 2,383 mm Weight of base machine: 12,700 kg EQUIPMENT LiftMaster Compact 1530 AL21 Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLC) Machine cooling unit water-air Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Solid-state laser TruDisk 3001 with one LLC output Light guide cable according to standard layout Laser cooling unit water-air Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine for height control and sheet metal edge detection Simple workshop programming Extended workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas pressure FastLine USB interface RJ-45 network connection CE marking Light barriers Nedpfx Ajz A S Dzogrsdb Multi-chamber extraction system Integrated compact dust extraction system Machine enclosure with certified viewing window and door on the right Synchron loader Scrap removal device and double sheet detection Movable removal rake Loading and unloading station Separation of thin sheet metal for synchronous loader Raw material and unpacking station Extended pallet extension on the machine Inventory interface

Condition: used, Industrial Vertical Lifting Conveyor, Used machine Nodpoz Er Rysfx Agrsdb Condition: Used, industrial execution Overall dimensions: 1380 x 920 mm Belt dimensions: 1000 x 560 mm Lower limit position: 370 mm Upper limit position: 960 mm Technical and operating parameters: Operating principle: Belt feeding and discharge integrated with vertical lifting motion Travel range: Vertical lift height adjustment between 370 mm and 960 mm Drive: Gearmotor drives for both the conveyor belt and the vertical lifting mechanism Control and safety features: Optical signal stack light, safety limit switches, and cable carrier chain (energy chain) Design, Operation: Compact vertical lifting conveyor designed for integration into automated production lines. The unit receives goods or components via the integrated belt conveyor, then raises or lowers them vertically within a 370–960 mm stroke to facilitate transfer between different line heights or processing stations. Suitable Application Areas: Bridging elevation differences in automated production and assembly lines. Automated loading/unloading systems and robotic cell feeding. Vertical transfer and precise positioning of trays, boxes, or component carriers

Condition: used, EXYPHE PIF card with cable. Nodpfx Agjz Enqioredb