Used Cheese Spreader for sale (703)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, The Mondini De/GS 200 type cheese spreader shown in the picture is for sale. The machine applies grated cheese like a "waterfall" onto the conveyor belt passing underneath. The application width can be adjusted up to approx. 15 cm widths. Infeed conveyor, and conveyor not included. Ljdsuwrr Sspfx Acfjhk

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Ljdpfxop T Tghs Acfshk Can produce 1,000 Kg of grated cheese per hour. A Weigh bagging system can be added to the grated cheese line

Condition: good (used), Cheese whey processing plant 15,000 Litres/Hour Plant consists of:- 250 litre stainless steel tank 15,000 litre/hr product pump complete with 5.5kw motor Tetra plex C8 SR plate heat exchanger SWEP gasketed hot water preparation unit Hot water pump complete with 3.0kw motor Automatic steam on/off valve Steam modulating valve Steam trap & Filter Lsdpezdz Nfjfx Acfehk Holding tube pipping and valving including 3 off x 2" 3 port flow divert valves RTD's for hot water, hot whey & cold whey High level probe for the balance tank

Condition: used, Year of construction: 2021, _____Sold on behalf of the customer: approximately 125,000 cubic meters used – trailed unit, K80 hitch. Drawbar suspension, hydraulic. Support foot – discharge pump with stone collection basin, inspection cover – hydraulic operation for emptying the stone collection basin – hydraulic ball valve for guiding function, sectional discharge – level gauge, automatic flow rate regulation, – Slurry Master 8000 with joystick, Isobus power supply – load-sensing control, electronic wheel control – ejector docking arm 2 with filling pump and level switch – filling hose for ejector docking arm 2 with 8" Bauer coupling 90°, – active rear three-point linkage CAT3 with height position sensor, rear operation, – 2 double-acting connections at the rear – 2 axles with air pressure brakes, 1 fixed & 1 steerable axle, – tires VREDESTEIN 750/60R30.5 – tire pressure control system with hydraulically driven compressor, – volume 19.8 m³ – LED lighting, rotating beacon – 1 work light 1000 lumens at the rear – HELLA LED work lights 4 on the machine and 1 at the rear – camera at the rear including screen, – wide-angle universal joint shaft 1 3/8 – central lubrication with pump for PGII, 3-point lift, docking arm & rear-mounted implement. Optional: 15 meter Bomech trailing shoe distributor. Location: null. Lsdpfx Acszu Uy Ejfohk

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Features and technical specifications: Right-hand configuration 2 side tables are still in their original packaging H&H / HARDO TH 1020-V46 BV DA (twin unit) Max. application width: 2,040 mm (2 × 1,020 mm) Configuration: Twin-unit system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Knurling on application roller: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Squeegee: pneumatically operated, needle-bearing mounted Main bearing lubrication: external lubrication, filled using a hand-operated grease gun Tank seal: adjustable and replaceable without removing the application element Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: Potentiometer Display: digital speed display Pressure rollers: 2, silicone-coated Pressure rollers, length: 2,040 mm Pressure rollers – diameter: 159 mm Pressure rollers – Actuation: pneumatic Pressure rollers Lowering: automatic after the drive motor is switched off Height adjustment of material feed: electrically driven in manual step mode Lhodpfx Acozk Nzvjfok Stroke of application unit: 0 – 200 mm Conveying height: 925 mm (lower edge of material) Drive for pressure rollers: separate drive Motor: including motor console, mounting and cladding Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: Potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2, made from anodised aluminium plates Adjustable feet: Adjustment range ±25 mm Material flow direction: right to left Heating control: Timer (daily and weekly programme) Temperature control: electronic with digital actual value display Melting tank volume: 2 × 25 litres Heating capacity: 2 × 8.0 kW Rated power: 18.5 kW Control voltage: 24 V Rated frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse rating: 63 A Compressed air connection: < 8 bar Application: Melting and application of non-reactive hot-melt adhesives Weight: 1,560 kg Availability: at short notice Location: Rhineland-Palatinate

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 817-19241, Year of construction: 2019, load capacity: 45,000 kg, Unused Surplus ELME 817 Reach Stacker Container Spreader – 45,000 kg Unused surplus ELME telescopic top-lift container spreader, designed for handling laden ISO containers with a reach stacker. Technical details: Manufacturer: ELME Spreader AB, Sweden Type: 817-19241 Serial number: 21426 Year of manufacture: 2019 Lifting capacity: 45,000 kg Spreader weight: 9,300 kg Control voltage: 24 V Head configuration: Broad head Telescopic positions: 20 / 30 / 40 ft 30-ft stop: Yes Lsdpfxszuxwze Acfjhk CE marked The spreader is unused

Condition: good (used), Year of construction: 2007, functionality: fully functional, working width: 1,400 mm, roller diameter: 240 mm, passage height: 80 mm, height adjustment type: electric, working height: 870 mm, roll width: 1,500 mm, workpiece height (max.): 80 mm, Bürkle DAK 1400 adhesive application machine, from the first owner, in well-maintained condition: – Machine for single- and double-sided adhesive application – Adhesive application on the top and bottom (4-roller machine) – Robust industrial design – Direct drive of the application rollers – Separate direct drive of the metering rollers – Metering gap adjustment with mechanical digital display – Height adjustment with mechanical digital display – Roller parallelism adjustable via sliding coupling – Infeed with 3 driven rollers for part length min. 350 mm – Outfeed with 3 driven blade disks for part length min. 350 mm – Frequency-controlled drive 6-30 m/min – Motorized height adjustment via push buttons – Working width max. 1400 mm – Clearance height up to 80 mm – Working height above floor approx. 870 mm Lsdpfxezuv Dfj Acfehk – 2 application rollers Ø 240 mm – Grooving 20 pitches per inch – 2 metering rollers Ø 190 mm – Roller width 1516 mm – Drive power 3 kW – Operating side Right – Paint finish RAL 7035 light gray – Year of manufacture 2007, first owner, well-maintained condition – Sale from location Karlsruhe / Southern Germany – Inspection and trial operation possible by arrangement

Condition: used, Year of construction: 1984, functionality: fully functional, working width: 1,400 mm, height adjustment type: mechanical, roll width: 700 mm, Equipment: double-sided, HÖFER Adhesive Application Machine Lsdpfx Acjzvnanefehk Application width 70 cm / 140 cm Suitable for panel materials and solid wood Simultaneous application of adhesive to the top and bottom surfaces READY FOR OPERATION

Year of construction: 2013, condition: ready for operation (used), A mobile cheese brining machine Sugnaux is available. Throughput: approx. 120-150 loaves/h, cheese diameter range: 100mm-200mm. Machine dimensions X/Y/Z: approx. 850mm/1000mm/1350mm, weight: approx. 250kg. The machine was recently overhauled with new couplings, control cables, wheels and frequency converter. Including vacuum cheese holder, second brush set and some spare parts. Documentation vorhanden. A visit on site is possible. Lhodpox Auqgefx Acfjk

Condition: ready for operation (used), An open copper cheese vat with low material removal and planetary agitator including knife harps and paddles is available. Shape: round, edge material: steel, inner diameter: 2600mm, useful volume: 7000l, outer diameter: 2850mm, height: 2950mm. Cheese mold: 2x4, mold length: 820mm, beam length: 4400mm, whey tub length: 4400mm, total length: 5000mm, width: 1500mm, depth: 900mm. An on-site inspection is possible. The copper was only gently washed. Lhodpfx Ajx Db Uuscfjk

Year of construction: 2013, condition: ready for operation (used), A scarcely used Rühle cooling vacuum tumbler with mixing, marinating and tumbling function is available. Container volume: 400l, max. filling volume: 300l, refrigerant: R404A, refrigerant quantity: 760g, mixer arm speed: 25rpm, polter arm speed: 25rpm, lifting aid load capacity: 300kg. Machine dimensions X/Y/Z: approx. 2100mm/2650mm/2700mm, weight: approx. 1400kg, operating hours: 7540h, mixing hours: 553h. Documentation available. An on-site inspection is possible. Lhodpfx Acsyx H Hbefsk

Condition: ready for operation (used), Equipment: open design, standing on 3 feet, insulated, jacket can be heated and cooled, copper inner coating, stirring/cutting unit, various connections in the jacket for hot water/ice water, outlet connection nominal diameter DN 65 reduced to nominal diameter DN 25, capacity: 1200l, outer diameter: 1770mm, inner diameter: 1600mm, height with agitator: 1550mm, tank height: 1000mm. An on-site inspection is possible. Ljdpfxoy Uyfie Acfohk

Year of construction: 2003, condition: ready for operation (used), A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Lhedpfxeyx H E Ds Acfok

Condition: excellent (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, machine/vehicle number: LU19H00399, input voltage: 400 V, type of input current: three-phase, input current: 26 A, Nordson VPUR-Slug unit. PUR adhesive melter with 5-meter hose and adapter nozzle. Fully functional. 500 operating hours. Single gear pump. Two hose connections. Additionally, includes many new consumable parts and a new 5-meter hose. Lhodpfjy Hl Nkex Acfjk

Year of construction: 2006, condition: ready for operation (used), Output: 400 loaves/h, including accessories and spare parts. Lhsdpfjh T A Trjx Acfok

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm Lsdpfx Aozu Syvscfshk 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste • Compatible with automated loaders and CNC cutting systems Advantages • High-precision spreading reduces material waste • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Lodpfxjy Avqde Acfohk Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description Ledey Alciepfx Acfjhk For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: good (used), machine/vehicle number: 0284, Year of construction: 2010, Offer 22650 Technical Specifications: - Load capacity 2100 t Lodow Rnzvjpfx Acfohk - Y span (width) 4.0 m - Y dimension (length) 3.5 m - 3 load hooks at the ends of the Y, each with a capacity of 1000 kg - Forklift entry pockets: W 500 x H 230 mm - Spreader beam dimensions approx.: L 3.2 x W 4.2 m - Outer frame made of square tube 100 mm - Central spreader beam tube made of square tube 140 mm - Construction height approx. 510 mm - Transport dimensions: L 3.2 x W 2.1 x H 0.55 m - Weight: 600 kg

Condition: good (used), Year of construction: 2016, Offer 25429 Technical data: - Load capacity: 1 t - Centrally positioned crane lifting eye - Hook-in height approx. 500 mm - 2 adjustable lifting eyes, adjustable from 1000 to 2500 mm - Adjustable spacing: 150 mm Lsdpfsygr Edex Acfjhk - Beam cross-section: W 100 x H 100 mm - Overall dimensions approx.: L 2650 x W 170 x H 500 mm - Weight approx.: 70 kg

Year of construction: 1970, condition: used, machine/vehicle number: xxxxx, Lg.no. 65502 Technical data : - Load capacity 8 t - Effective height 620 mm - Total height 780 mm - 4 pieces load support double hooks adjustable - Spacing adjustment grid for double hooks 100 mm - Cross beam IPE 240 - Total length approx. 2000 mm - Total width approx. 1050 mm - Weight approx. 350 kg Lhjdst H Iwuspfx Acfsk

Condition: new, Year of construction: 2026, Autonomous spreader of sand-salt mixture RPS-1500 from ТМ TlSAV - is a powerful equipment for high-quality spreading of roads and pavements with de-icing materials, which allows to minimize the use of manual labour and reduce the accident and risk of injury to people. The spreader is equipped with a 1.5 m³ hopper with a scraper-chain feeding mechanism and a disc for spreading materials. Thanks to its autonomy and compact dimensions it can be used with any vehicle. CHARACTERISTICS Lhedpfx Acovpp S Nofok -Spreading width, depending on disc speed - 3-6 m. - Hydraulic drive mechanisms. -Adjustment of the disc inclination (manual). -Mix feeding mechanism - scraper-chain. -System of proportional control of disc rotation speed on the control unit in the driver's cab - (optional). - Control of the equipment by remote control from the driver's cab. - It has its own wheelbase or can be mounted on the customer's vehicle. TICAB is a manufacturer of road machines: bitumen emulsion sprayers, joint and crack fillers, asphalt recyclers, street hoovers, universal loaders and other road machinery. High European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor! We will be glad to contact you! Sand spreader with capacity of 6 cubic metres (9 tonnes of mixture) for treatment of carriageway with anti-icing materials (sand, salt, sand-salt mixture) in winter period and transportation of asphalt concrete mixture in summer period. Sand spreaders are installed in the lorry body with the help of a crane. -Dimensions: L-4.5 m; W-2.10 m; H-1.85 m - Travelling speed - up to 30 km/h. - Strip treatment width up to 10 m, spreading density - up to 350 g /m. - Adjustment of width and density of spreading - on the body of the spreader. -Feed distributor is disc-shaped (stainless steel), equipped with a protective cover, height adjustable, equipped with a hydraulic motor. - Power take-off of the hydraulic system - from the standard power take-off box of the vehicle. -Scraper-chain sand (salt) feeding is equipped with a hydraulic motor, with protection against ingress of small foreign objects. - Adjustment of scattering ‘right-left-proportional’. - Control (ON/OFF) from the driver's cab.

Condition: new, functionality: fully functional, Year of construction: 2026, RPS-6000/9000 SALT & SAND SPREADER TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair and maintenance of asphalt concrete surfaces. Salt and Sand Spreader RPS-6000/9000 TM TICAB is a perfect solution for de-icing the streets and highways. Lhedpfx Aet N Ty Tscfjk New Salt and Sand Spreaders RPS-6000/9000 with 6 m3/9m3 capacity are made for spreading de-icing agents. Allowable outside temperature is to -40°С. The spreader should be mounted on a truck using a crane. The salt spreader RPS-6000/9000 is a prospective investment. Fits any truck. Technical Specifications ● Recommended velocity up to 30 km / h. ● The spreading density is 350 g/m2. ● The spreading width is up to 4-8 m. ● Width and density regulation from the Spreader body. ● Disc spreader stainless steel. Position regulating. ● Autonomous (diesel engine). ● Feed mechanism - conveyor chain. ● Adjusting the spreading angle. ● Protective awning. ● «ON» / «OFF» from the driver’s cab. ● In-cab adjustment of width and density of spreading. Service Terms ● In stock ● Warranty: 12 months ● Delivery: from the manufacturer’s warehouse ● Support: manual, technical assistance, video instructions

Condition: new, Year of construction: 2026, RPS-1500 The RPS-1500 self-contained sand-and-salt spreader from TISAV is the ideal piece of equipment for the effective spreading of de-icing materials on roads and pavements, minimising the need for manual labour and significantly reducing the risk of accidents and personal injury. The spreader is fitted with a 1.5 m³ hopper featuring a scraper-chain feed mechanism and a disc for spreading materials. Thanks to its self-contained design and compact dimensions, it can be used with any vehicle. Ledpjt Ifxlsfx Acfohk SPECIFICATIONS: • Spreading width, depending on disc speed – 3–6 m • Hydraulically driven mechanisms • Disc tilt adjustment (manual) • Mixture feed mechanism – scraper-chain • Proportional control system for disc rotation speed via the control unit in the driver’s cab (optional) • Equipment controlled via a control panel from the driver’s cab. • Features its own wheelbase, or can be mounted on the customer’s vehicle.

Condition: new, functionality: fully functional, color: orange, empty load weight: 2,200 kg, brakes: other, gearing type: other, emission class: none, loading space length: 5,745 mm, loading space height: 2,821 mm, Year of construction: 2026, Equipment: additional headlights, hydraulics, TICAB RPS 9000 (9 m³) Sand & Salt Spreader | Heavy-Duty Winter Road Maintenance Equipment Engineered for productivity and durability, the RPS 9000 provides uniform spreading performance even in extreme weather conditions, helping maintain safe and accessible roads throughout the winter season. The TICAB RPS 9000 is a high-capacity, professional-grade sand and salt spreader designed for efficient winter road maintenance, snow and ice control, and anti-icing/de-icing operations. Built for demanding conditions, it ensures reliable performance on highways, municipal roads, airports, parking areas, and industrial surfaces. Key Advantages ✔ Large 9 m³ hopper capacity for long, uninterrupted operation ✔ Hydraulic scraper-chain feeding system ensures stable and consistent material flow ✔ Disc spreading system for precise and uniform salt/sand distribution ✔ Adjustable spreading width from 4 to 8 meters ✔ Optional autonomous engine for independent operation ✔ Optional cab-controlled proportional disc speed for enhanced precision ✔ Quick mounting system for fast installation on trucks ✔ Heavy-duty construction designed for harsh winter environments Applications • Winter road maintenance and snow control • Anti-icing and de-icing operations • Highway and municipal street maintenance Lsdpex Uwp Eofx Acfohk • Airport runways and taxiways • Parking lots and logistics centers • Industrial and commercial территории Built for Professional Winter Operations The TICAB RPS 9000 is designed to meet the demands of modern winter maintenance fleets. Its high-capacity hopper and precise spreading system ensure efficient material usage, reduced operating costs, and improved road safety under snow and ice conditions. Why Choose TICAB RPS 9000? • High productivity with large working capacity • Reliable performance in extreme weather conditions • Precise and uniform spreading quality • Flexible truck-mounted design • Ideal for municipal and highway winter service fleets Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB RPS 9000 is available for fast production and worldwide shipping.