Used Claas Claas Quadrant 2200 Fine Cut for sale (19,648)

Condition: used, Year of construction: 2006, Fine Cut cutting rotor, Claas operator terminal, automatic central lubrication system, air brake system, wide-angle PTO shaft, hydraulic crop discharge system, tire size 520/50-17. Knedpfx Ahsz R U Eaoisc

Condition: used, Year of construction: 2024, Finecut cutting rotor, 51 knives, bale size 0.90 x 1.20 m, tires 620/50R22.5, steering axle, pneumatic two-circuit braking system, moisture sensor, additional twine boxes, ProfiCam, Cemis 700 operator terminal, bale ramp with weighing system, hydraulic roller chute, hydraulic bale ejector, twin roller presser, PFS system, K 80 lower linkage, approximately 5513 bales pressed. Knjdpfjz Sblcox Ahiec

Condition: used, Year of construction: 2019, Tires: 620/50 R22.5, hydraulic bale ejector, weighing system, bale discharge mechanism, PTO shaft, K80 lower hitch, tandem steering axle, bale detection sensor, air brake system, ISOBUS control unit without terminal, automatic central lubrication system, 60 km/h, Krassort front-mounted forage harvester Special Cut 180 (year of manufacture 2019). Kjdpfxoz Sbcns Ahienc

Condition: used, Year of construction: 2021, Tires: 620/50 R22.5. K80 lower hitch, PTO shaft, air brake system, ISOBUS, load sensing, pick-up sensing wheels, 51-knife cutting rotor, hydraulic flywheel brake, hydraulic roller chute, weighing system, hydraulic bale ejector, trailing axle, moisture sensor, bale discharge sensor, CEMIS 700 operator terminal, LED work lights, automatic press pressure control, automatic central lubrication system, electric bale length adjustment, 60 km/h, location: 21769 Lamstedt. Knods Aayq Rjpfx Ahiec

Condition: used, Year of construction: 2021, Fine Cut cutting rotor with 51 knives, flywheel brake, hydraulic bale ejector, wide-angle PTO shaft, K 80 lower hitch, tandem steering axle, air brake, moisture sensor, bale discharge sensor, ISO bus without operator terminal, automatic central lubrication, tires 620/50R22.5. Knodpez Sazvofx Ahisc

Condition: good (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 500 mm, saw blade speed: 2,800 rpm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, saw band length: 500 mm, main saw diameter: 500 mm, saw blade length: 6,000 mm, Double automatic aluminum saw with 500 mm blades. Cuts materials up to 6000 mm in length. Can automatically cut an entire profile into smaller pieces. Knedpfx Ahex U Df Heiec Length, cutting angle, and material thickness are electronically adjusted on the machine. The saw system is in perfect working order. For sale due to production shutdown. We are happy to assist with loading the machine onto the buyer's truck.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Datacon 2200 EVO (Gen3) The die bonder / multi-chip assembly machine from Datacon (Besi). Die attach, multi-chip, and flip-chip capabilities. Placement accuracy: ±10 µm at 3σ Theta: ±0.15° at 3σ Bond force: 0.5–75 N Up to 4 working heads Wafer handling up to 12 inches Die attach up to approximately 7,000 UPH/module Flip-chip up to 2,500 UPH with dipping Knodpfx Ajy S S Uwjhisc Heated bond head up to 450 °C Substrate area up to 325 × 200 mm Weight approximately 1,300 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 43,686 h, total height: 2,300 mm, overall weight: 7,000 kg, table width: 500 mm, table length: 870 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D Powerline, working width: 500 mm, cutting length (max.): 870 mm, laser power: 100 W, number of axes: 3, This 3-axis DMG Sauer Lasertec80 FineCutting was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 700 mm. The machine is equipped with a Siemens SINUMERIK 840D Powerline control and a high-precision cross table with linear drives. If you are looking to get high-quality laser fine cutting capabilities, consider the DMG Sauer Lasertec80 FineCutting machine we have for sale. Contact us for further details. Technical Data • Machine Type: Laser Fine Cutting, Laser Drilling and Laser Welding Machine • Control: Siemens SINUMERIK 840D Powerline • Table Type: Cross Table with Linear Drives • Maximum Sheet Size: 870 × 500 mm • Vertical Axis with Linear Guideways and Ball Screw Drive • Machine Base: Mineral Cast Construction • Laser Type: Lasag KLS246 Nd:YAG Laser • Average Laser Power: 100 W • Focal Length: 70 mm • Machine Dimensions (L × W × H): 6,000 × 5,000 × 2,300 mm • Machine Length: 6,000 mm (including aggregates, operation and maintenance space) • Machine Width: 5,000 mm (including aggregates, operation and maintenance space) • Operating Hours: 43,686 h • Laser Unit Condition: C Module Defect Additional Equipment • Precitec Processing Head • Automatic Height Control • Keller Dust Extraction System • Automatic Filter Cleaning System • KKT Kraus Water-Air Cooling Unit • Programmable Process Gas Pressure • Completely Overhauled Laser Cavity • New Pulse Lamp • Precitec Laser Head Mounting Tools Machine Benefits • Suitable for Laser Fine Cutting, Laser Drilling and Laser Welding Knodpjzl T R Djfx Ahijc • High-Precision Cross Table with Linear Drives • Automatic Height Control for Precise Processing • Comprehensive Maintenance Logbook Available • All Repairs and Component Replacements Documented • Inspection on Site Possible • Repair of the Laser Unit PossibleRepair will only be carried out if requested. Please note that the selling price may vary accordingly.

Condition: used, Year of construction: 1990, operating hours: 2,946 h, power: 115 kW (156.36 HP), Equipment: air conditioning, cabin, INTERNAL VEHICLE NUMBER: M662 ----CLAAS DOMINATOR 88 SL ----HOURS: 2,946 ----YEAR OF MANUFACTURE: 1990 ENGINE: PERKINS 6-CYLINDER WITH TURBO (4-STROKE DIRECT INJECTION) WATER-COOLED MAXIMUM SPEED: APPROX. 25 KM/H CUTTING UNIT: 3.90 METERS RAPS TABLE THRESHING DRUM WIDTH: 1300 MM THRESHING DRUM DIAMETER: 450 MM STEPLESSLY ADJUSTABLE FAN FOR CLEANING FUEL TANK PIPE: HYDRAULICALLY SWIVELING TIRES NEW NUMBER OF SHAKERS: 5 SHAKERS HYDRAULIC DRIVE GRAIN TANK CAPACITY: 4600 L STRAW SPREADER TRANSPORT LENGTH: 10 METERS TRANSPORT HEIGHT: 3.85 METERS UNLADEN WEIGHT: APPROX. 8500 KG HEATING AIR CONDITIONING (COMPRESSOR MISSING) 3D LEVELING SYSTEM HYDROSTATIC TRANSMISSION WITHOUT CUTTING UNIT WAGON THE HEADER DRIVE HAS BEEN COMPLETELY OVERHAULED NEW BASKET NEW BELT NEW BLADE Contact us directly via WhatsApp: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer customized financing solutions tailored to your needs: with or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will support you from the initial consultation to vehicle handover. 4. Our additional services: In addition to vehicle purchase, we offer exclusive services for a smooth process: Worldwide vehicle sales: Support with purchase and export, wherever you are. Transfer registration plates: Knsdpfjz Sdvwox Ahioc Provision of export or short-term registration plates for transport. Customs clearance: We take care of all formalities for export abroad. Delivery of your vehicle: Safe and timely delivery directly to you. Important: All offers are subject to availability. The vehicle description serves as a guide; only the information in the purchase contract or order confirmation is legally binding. For vehicles with VAT, net sales for export are generally possible if all required documents are available. Net sales within the EU are now only conducted with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided that all necessary documents are present. For our export customers, we offer the following services: Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Contact us directly via WhatsApp: Staff on-site during opening hours. Please call in advance to make a reservation. We look forward to your call Your team from Autohaus MAT in Waibstadt

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Grinding disk diameter 500 mm Knsdjz Hxhuepfx Ahiec Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, Year of construction: 2019, operating hours: 184 h, tire size: Vredestein 620/50 R22,5 + 620/50 R22,5, Equipment: compressed air brake, - Compressed air - Tool box - Lighting Knjdpfsz Na Izjx Ahijc - 2x chock blocks - 1x fire extinguisher - 25x stub knives - Moisture sensor - Hydraulic pickup - 51 knives - Walterscheid PTO shaft

Condition: used, Year of construction: 2011, 10 rows, hydraulically foldable, autopilot, automatic ground contour adjustment, 2-speed gearbox. Knodpfxez R U Ars Ahioc

Condition: used, Year of construction: 2011, Autopilot, manual transmission, protective cover. Kedpfx Ahez Sbdfjionc

Condition: used, Year of construction: 2012, - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit Film cutter Kodpfx Ahszuy Arjionc Manufacturer: HSM Maschinentechnik Type: ABW - ROTA - 2200 Year of manufacture: 2012 Technical data - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit - Front: semi-automatic roll change - Rear: individual sheets are automatically stacked on a pallet Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2026, Claas cutter bar Vario 1080, rapeseed kit, 2 hydraulic side knives, Claas 2-axle transport trailer with brakes, Advance package, radial distributor, special cut straw chopper, V-channel chain Auto Contour, automatic hitch, dust extraction, cutter bar brake, threshing drum drive 330-930 RPM, 3D cleaning, grain meter including volumetric measurement, grain tank volume 13500 liters, grain tank discharge pipe XXL 420 mm, pivoting discharge spout, 40 km/h, MAN engine D2676, automatic climate control, rear camera and hitch camera, Profi Cam camera screen, CEMIS 1200 terminal, quantimeter, premium air-suspended seat, LED work lights, SAT 900 RTK activation, GNSS receiver, CEMOS Dialog, CEMOS Automatic: Auto Threshing, Auto Separation, Auto Cleaning, Auto Crop Flow, Cruise Pilot, Grain Quality Camera, automatic discharge direction adjustment, dynamic steering, tire size 635 mm TT, 620/70R30. Ksdjz Sbgyjpfx Ahisnc

Condition: used, Year of construction: 2026, Claas cutter bar Vario 770, Claas transport wagon, V-channel – AUTO CONTOUR, JET STREAM cleaning system, 3D cleaning system, grain tank volume 10,000 liters, grain tank discharge pipe XL, Ø 330 mm, chaff spreader, SPECIAL CUT straw chopper, 30 km/h, automatic climate control, camera with display, automatic hitch, yield meter, CEMIS 1200, CEMOS Automatic – Auto Crop Flow, Auto Slope, Cruise Pilot, tires 800/70 R38, 600/65 R28. Knedpfx Ajz R U N Sshijc

Condition: like new (used), Year of construction: 2022, operating hours: 238 h, functionality: fully functional, machine/vehicle number: PR5-2500-07221514, type of input current: AC, sheet thickness (max.): 22 mm, overall weight: 1,000 kg, input voltage: 230 V, total width: 2,200 mm, total height: 1,500 mm, total length: 3,800 mm, cutting height (max.): 120 mm, table length: 2,500 mm, working width: 1,250 mm, table width: 1,250 mm, cutting current: 105 A, working length: 2,500 mm, input current: 6 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, height adjustment type: electric, input frequency: 60 Hz, Equipment: documentation/manual, Swift-Cut PRO 2500 MK5 CNC Plasma + Hypertherm 105 (LIKE NEW / 238h) We can assist with loading! 🇬🇧 ENGLISH DESCRIPTION: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of actual use). Availability: Immediately available. We offer a top-of-the-line CNC plasma machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). In perfect technical and visual condition, ready for immediate production. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key Technical Specifications: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table - Power supply: 110-230 VAC; 50/60 Hz Software Included: - CNC Controller - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced Features & Equipment: - Soft Sense (IHS): Accurate piercing and cutting height control - DTHC: Dynamic and automatic voltage correction - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our MAJOR Advantage): - FREE Loading: Professional and safe loading included! - Transport Assistance: We assist in organizing fast and cost-effective transport within Europe. - Video of the machine in operation available upon request; on-site testing is welcome. 🇩🇪 DEUTSCHE BESCHREIBUNG: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of use). Availability: Immediately available. We offer a top-class CNC plasma cutting machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). Perfect technical and visual condition, immediately ready for operation. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key technical data: Knjdpfxoztu Aqs Ahisc - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table Included software: - CNC control - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced features & equipment: - Soft Sense (IHS): Accurate piercing and cutting height - DTHC: Dynamic voltage correction during cutting - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our MAJOR Advantage): - FREE loading: Professional loading included in the price! - Transport support: We help organize transport in Europe. - A video of the machine in operation is available upon request, on-site testing possible.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Kedpfx Ahey Snwneijnc Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: used, Year of construction: 2014, Auto Contour, autopilot, hydraulic oscillating frame, manual transmission, protective cover, suitable for CLAAS Jaguar. Kjdpjz Sc Raefx Ahienc

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Knjdpfx Ahozyz Dbsijc Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: used, Year of construction: 2020, operating hours: 80 h, machine/vehicle number: pr5-3000-08200667, type of cooling: water, Equipment: documentation/manual, Swift-Cut Pro 3000 plasma cutting table. I have not personally operated this machine. The machine is in very good condition. It has been used for very few hours, and I would rate its condition as close to new. The set includes a Hypertherm Powermax 105 power source. Sold without warranty or guarantee. Kjdpfoz Ixzkox Ahienc

Condition: used, Year of construction: 1996, Transverse conveyor belt suitable for Claas Sprint 335 + 445, mechanical drive via PTO shaft, PTO shaft included. Kjdpfez Scazjx Ahionc

Condition: used, Year of construction: 2016, Electro-hydraulic oscillating frame, Auto Contour, Auto Pilot, 2 small transport wheels, manual transmission. Knodpfx Aez Sbklohisc

Condition: used, Year of construction: 2018, functionality: fully functional, Working area: 3000 × 1500 mm Design: Downdraft / fume extraction table Kjdpfx Ahez Iniqoienc Plasma source: Hypertherm Powermax65 Max. current: 65 A Plasma source power supply: 400 V / 3-phase Compressed air: min. ±5.9 bar CNC plasma cutting machine with automatic torch height control

Condition: used, Year of construction: 2018, Manual transmission, autopilot, protective cover, automatic contour adjustment to ground conditions, 2 transport wheels. Knjdjz R Uy Depfx Ahisc