Used Clamping Clamps for sale (8,736)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data are taken from the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Lifting capacity: 12,000 kg at a load center of 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Collapsed height: 4,895 mm Extended height: 8,100 mm Tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6-cylinder / eco-friendly engine with CAN bus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, displacement 7.7 L STEINWEG Stone Stack Grab Type HG1T-6000S TECHNICAL DETAILS Clamping range: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Lifting capacity: 6,000 kg Double clamp bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in a robust and clean welded construction Splayed clamp arms mounted rotatably With hydraulic cylinders, required valves, pipes, and fittings Including oil pressure manometer and connection hoses to the rotator Additionally: one pressure gauge mounted 180° opposed to the standard manometer LIFTING ARM & EXTENSION TECHNICAL DETAILS Extension: 1.6–2.1 m Lifting capacity: 8,000 kg at an outreach of 1.6–2.1 m Hsdpfx Ajy T Edhomgsn EQUIPMENT 1 piece forklift lifting arm, twin beam, with endless rotator and pendulum suspension Including connection hoses to forklift 1 piece hydraulic extension with telescopic cylinder 1 stabilizer (2 pcs) for pendulum motion compensation Integrated side shifter in slide guides, travel: 250 mm RADIO PRESSURE MONITORING (Clamping Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30°C to +85°C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC system: Electronic control with 7" touch screen Driver's seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mud flaps Rear mud flaps Exterior mirrors on fender (high) Turbo II heavy-duty air filter Additional hydraulic functions Quick couplings on the fork carriage Accumulator/vibration damper 60 bar / 2 L in the lifting function Hydraulic oil tank pre-heating Additional LED headlights, 2 × on the mast Reversing alarm LED beacon Electrical cables over the mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with RPM increase EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Movable A4 writing pad LED reading lamp Diesel parking heater + engine water heater Sun visor (roof/front) Panorama rearview mirror Preparation for attachments from other manufacturers Central lubrication base, 14 points

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Hodpfxjx A Hfvs Amgsn Max length workable: 2500 mm Max height workable: 1340 mm Max feed speed: 40 m/min

Condition: used, machine/vehicle number: 008254, Max width workable: 700 mm Hjdpfx Ajx A Hfpomgon Max length workable: 2600 mm Max height workable: 1300 mm

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Handover: in its current condition as inspected -Condition: see pictures -Clamping angle: for workpiece clamping -Table surface: 730x610 mm, height 1595 mm -Wall thickness: 35/42 mm Hjdpfszav Hrjx Amgon -Oblong hole: 25x150/25x105 mm -Dimensions: see photos -Number: 4x mounting brackets available Price: per piece -Dimensions: 610/730/H1595 mm/piece -Weight: 658 kg/piece

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press Hedpfx Amjzakf Nogen -Mounting plate: Mounting plate with straightening press -Length: 4025 mm -Width: 1990 mm -Piston diameter: Ø 63 mm -Stroke: 110 mm -Pressure force: 20 t -Overall dimensions: 1990/4025/H1920 mm -Weight: 5060 kg

Condition: new, Year of construction: 2014, operating hours: 46 h, load capacity: 300 kg, lifting height: 1,850 mm, fuel type: electric, mast type: duplex, construction height: 1,500 mm, Manufacturer + model LINDE L 16 (372) Mast 2W1850 + KAUP / Drum clamp ID 23032.5921 Mast 2W1850 Hjdpfxozafmzs Amgen Lowered height 1500 mm Lifting height 1850 mm Year 2014 Operating hours 46 Capacity 24 V / 345 Ah Options: Equipped with free-carrying -> Drum clamp KAUP 0.8 R405 Drum clamp range = 450 to 850 mm

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. Hedpozapyfsfx Amgon No shipping possible. Please do not send email enquiries! If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Subject to changes, prior sale, and errors. We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: good (used), Year of construction: 2000, Casting top plate make STOLLE Type:ASP 1610 Hedpfohcin Hex Amgon length : 1610 mm width : 250 mm height : 60 mm T-slot for M16 Good condition.

Condition: excellent (used), Year of construction: 2010, CAST MEASURING SPLETTE Fabr.STOLLE Type:GMP 6000 Bj.ca.2010 Dimensions: length 6000 mm width 2500 mm height 360 mm. Very good condition. Hsdpjg Uf Nkofx Amgen Weight.about 16 000 Kg.

Condition: like new (used), Year of construction: 2010, Casting clamping angle Fabr.SAV Typ:AW71863 Bj.ca.2010 As good as new with 315mm Röhm chuck bore 100 mm Width : 500mm Depth : 310 mm Height without base plate: 550 mm Height with base plate: 585 mm Base plate : 500 mm X 400mm Center height : Chuck : 325 mm is hardly used Very good condition Hsdpfohcimwox Amgsn with chuck key .

Condition: good (used), Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box, measuring chimney -Surface: scraped -Material: cast -Dimensions measuring chimney: 450 x 450 x 3005 mm -Wall thickness: 30/80 mm Hodpedf U Sysfx Amgon -Holes: Ø 52 mm -Dimensions base plate: 1080 x 1080 mm -Transport dimensions box one: 3310/645/H770 mm -Transport dimensions box two: 1160/1080/H350 mm -Weight: 1190 kg

Year of construction: 2020, condition: used, functionality: fully functional, Nine locking frames for a Bobst 162 CER, available at a bargain price. Hodpfx Amsy U Itujgon

Condition: good (used), Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Dimensions: 5545/535/H268 mm -Sheet thickness: 60 mm -Plate: with supporting ribs -Weight: 3000 kg Hsdpfx Ajcpklbemgjn

Condition: good (used), Year of construction: 2010, Offer 25338 Technical data: - Length 1300 mm Hsdpezaa Awjfx Amgon - Width 800 mm - Plate height 215 mm - Wall thickness 15 mm - Hole diameter of the perforations approx. 28 mm - Center distance of the perforations, each approx. 100 mm - Table height approx. 970 mm - Total weight approx. 400 kg

Condition: good (used), Offer 25350 Technical data: - Width approx. 1250 mm - Height approx. 1600 mm Hsdpfx Amezaak Iegen - Depth approx. 1000 mm - Plate thickness T – groove side approx. 90 mm - 8 T-grooves, length 1250 mm each - Distance between the centers of the T-grooves: 200 mm each - Distance from the outside edge: 100 mm - T-groove width approx. 35 / 60 mm - T-groove depth approx. 28 / 32 mm - Weight approx. 1400 kg

Condition: used, - d1 = 30 mm, Hsdpfjlkcg Rsx Amgen - d2 = 27 mm (wrench size), - Total length: 110 mm, - Available: 3 pcs Price per piece: €25.00 + VAT,

Condition: used, - d1 = 30 mm, - d2 = 27 mm (wrench size), - Total length: 215 mm, Hsdpfxslkcgio Amgen - Available: 2 pcs. Price per piece: €45.00 + VAT.

Condition: used, - M40 x 1.5, - Right-hand thread, - Available: 5 pcs. Hodpfxolkcgbj Amgjn Price per unit: €100.00 + VAT.

Year of construction: 1980, condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Travel : 4 000 mm table surface : 4000 mm X 1400 mm Feed rate : 8 - 2500 mm/min Rapid traverse : 4 m/min load capacity. Max : 12 500 kg Hedpfxeg Uf I Ae Amgon Weight : approx. 12 000 kg In good condition. Hydr.clamping and worm drive

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 800 kg, empty load weight: 432 kg, Cardboard clamp Load center: 325 Hedjxbu Euepfx Amgsn ISO class: ISO class 2 = 1,000 – 2,500 kg Mast type: None Technical condition: good Description: Cardboard clamp, side shifter, opening range 490-1,670 mm, arms 650x1,000 mm, FEM 2a UK: Carton Clamp, Side Shifter, Opening Range 490–1,670 mm, Arms 650 x 1,000 mm, FEM 2a

Condition: ready for operation (used), Year of construction: 2021, load capacity: 1,400 kg, Brand: KAUP Model: 4.5T413 Year of manufacture: 05/2021 Load capacity: 1400 kg Widest opening distance: 168.5 cm FEM 2 Hjdpfx Amoy Tw Thjgen Condition: very good

Condition: used, Year of construction: 1999, functionality: fully functional, empty load weight: 1,085 kg, load capacity: 2,900 kg, opening width: 2,100 mm, Rotating fork clamp Load center: 340 mm Hedsy T Szmspfx Amgon ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: very good Description: Kaup attachment, rotating fork clamp 4T453, year of manufacture: 1999, load capacity: 2900 kg at 500 mm, fully functional! Max. opening width: 2100 mm, width of clamp arms: 570 mm, height of clamp arms: 830 mm.

Condition: used, functionality: fully functional, Year of construction: 1995, load capacity: 720 kg, empty load weight: 475 kg, opening width: 2,350 mm, Bale clamp Hsdpoy T Szaofx Amgen ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Kaup attachment T 413 GT bale clamp for white goods, max. load capacity: 720 kg at 350 mm, max. opening width: 2350 mm, clamp width: 670 mm, clamp height: 1050 mm. We have many other bale clamps and various attachments in stock!

Condition: used, Technical details: table length: 400 mm table width: 225 mm width:: 400 depth: 225 mm height: 300 mm dimension L-W-H: 400 x 225 x 300 mm weight: ca. 34 / Winkel kg 2 pieces available (price per piece) with slotted holes Material made of cast steel Surface finished Hjdpfx Amewb D H Degsn *

Condition: used, Technical details: Hsdpsu N Eatofx Amgsn width: 700 mm depth: 600 mm height: 910 mm weight of the machine ca.: 440 kg dimension L-W-H: T: 600 x B: 700 x H: 910 mm Steel plate welded, 80mm thick, with stiffener surface finished Clamping surface vertical: 6x T-slot according to DIN 650: a=24mm; h=45mm; b=43mm; c=18mm; distance 140mm Clamping surface foot: L: 600mm x W: 700mm, 7x clamping hole *