Used Clark Ctm 16 S for sale (74,997)

Condition: used, Kompakter und wendiger Elektrostapler mit Ladegerät. Compact and maneuverable electric forklift with charger. Elektro Gabelstapler / Eletric Forklift Clark CTM 16 S Baujahr / Year 1998 - Serial-No. CTM145 2765 GEF 7096 3-Rad-Gabelstapler / 3-wheel Fork Lift Tragkraft / forklift lifting capacity max. 1600kg Hubhöhe / Lifting high max. 3300mm Lastschwerpunkt / center of gravity 500 mm Eigengewicht / Total weight 3138kgs Mit Ladegerät / with Charger Bjdpfx Afexp H Eiswjdg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Bedpeztpw Nefx Afwjdg Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, functionality: limited functionality, machine/vehicle number: PH365D 0440 GEF 8895, Year of construction: 1996, load capacity: 3,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: triplex, drive type: Diesel, Diesel forklift Chassis number: PH365D 0440 GEF 8895 Mast type: Triplex Condition: Limited operational readiness Technical condition: poor Front tire type: Solid rubber Front tire condition: 20 - 40% Bsdpfszx Hxnex Afwodg Rear tire type: Solid rubber Rear tire condition: 20 - 40% Description: German Clark CDP 30H No.: R805 Year of manufacture: 1996 Operating hours: not specified Lifting capacity: 3,000 kg Lifting height: 3,300 mm Overall height: not specified Mast: Triplex Drive: Diesel Engine: Clark Chassis number: PH365D 0440 GEF 8895 Tires: Solid rubber front and rear, condition approx. 20–40% Equipment: 3rd and 4th hydraulic valve. Condition / known defects: The machine is currently not drivable and not operational. The injection pump is defective. Repairing or replacing the injection pump may possibly make the machine drivable again. However, we cannot guarantee that the injection pump is the only cause of the problem or that the machine will be fully drivable and operational after the repair. The machine is sold in its current condition and is intended especially for repair projects or as a spare parts donor. Note: The attachment shown in the pictures is not included in the sale and is not sold together with the forklift. If interested, the attachment can be requested separately. Transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. 3rd valve, 4th valve

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 16 stations + manual feeder Bodpszrxfgefx Afwodg High-stack feeder, 70 cm SFT 350 S (stitching/folding/cutting) S3 collating station with shaking function A4 landscape orientation Spare knife set Electronic double-sheet, misfeed and stitch wire detection 3 Hohner stitching heads, Universal 43/6 S Compressors Approx. 11.9 million stitches

Condition: used, functionality: fully functional, load capacity: 1,600 kg, free lift: 1,787 mm, fuel type: electric, mast type: triplex, construction height: 2,700 mm, fork carriage width: 940 mm, fork length: 1,150 mm, drive type: Elektro, Reach truck Mast type: Triplex Technical condition: New Battery voltage: 48V Battery capacity: 465Ah Battery manufacturer: Eternity Battery year of manufacture: 2026 Battery condition: New Load protection grid: WxH 790 mm x 910 mm; 4 hydraulic functions: Mini-lever with armrest; Drive wheel: Polyurethane; Load wheels: Polyurethane; Grammer vinyl seat; Key switch; Battery compartment design: small; Side battery exchange; Availability: in 22 weeks Tire configuration: 1x/2; Bjdpfjy Haplsx Afwsdg

Condition: used, load capacity: 1,600 kg, free lift: 1,497 mm, fuel type: electric, mast type: triplex, construction height: 2,105 mm, fork carriage width: 940 mm, fork length: 1,220 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Triplex Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 48V Battery capacity: 460Ah Battery manufacturer: Eternity Battery year of manufacture: 2026 Battery condition: New Load guard: WxH 940 mm x 1220 mm Hose routing: double; storage compartment; steering wheel button; seat switch; weather protection/steel protection canopy and windshield; two front headlights; rear combination light; acoustic reversing alarm; blue LED spotlight when reversing; front turn signals; socket wrench; availability: in 22 weeks Bedpfxey Haprs Afwodg

Condition: used, Year of construction: 1988, operating hours: 1,138 h, load capacity: 7,000 kg, lifting height: 3,350 mm, fuel type: diesel, gearing type: automatic, Equipment: head guard, * Hydraulic fork adjustment * 55kW diesel engine (water-cooled) * Protective roof * Fork length: 2500mm Bdodpfozaicmjx Afwsg ----Vehicle number 12135 ----Errors and prior sale excepted

Condition: excellent (used), Air-operated, water-cooled rocker-arm spot welding machine Brand DALEX Type SL 16/S Rated power at 50% duty cycle: 16 kVA Bdjdpfxov Sql Ns Afwsg Secondary short-circuit current: 13.5 kA Secondary open-circuit voltage: 1.8 - 3.5 V Electrode force: 278 daN Arm reach: 180-500 mm adjustable Arm spacing: 140 or 300 mm With 8-position switch for power preselection Additional control unit 1036

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Bodpfxey Rnr Aj Afwedg Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Year of construction: 2007, condition: ready for operation (used), A Buffalo CNC lathe in need of repair is offered for sale. Center height: 200mm, distance between centers: 880mm, chuck diameter: 160mm, swing over bed: 410mm, swing over cross slide: 230mm, bed width: 260mm, spindle bore: 46mm, spindle nose: A2-5, max. spindle speed: 5000rpm, X-axis travel: 190mm, Z-axis travel: 855mm, rapid traverse: 12m/min, tailstock quill diameter: 58mm, tailstock quill travel: 140mm, tailstock quill taper: MT4, control: Fagor 8055 TC. Accessories included. Dimensions X/Y/Z: approx. 2286mm/1800mm/2230mm, weight: approx. 2350kg. The feed motor of the spindle drive is defective. An on-site inspection is possible. Bjdpfx Aozt Slijfwodg

Condition: good (used), Year of construction: 2008, Pass threw Hook type shotblasting machine 3000x3500 with motorised hook with crane OMSG Year or production: 2008 Type: Hook type Max. diameter of workpiece: 3000 mm Max. height of workpiece: 3500 mm Max. workpiece weight: 10.000 kg Manual blasting chamber: YES Blow off chamber: YES Machine oppening width: Nr. Of turbines: 16 Turbine type: 350 Turbine wheel diameter: 350 Power of turbine: 16x 11kW Max. turbine flow: Type of transport rail: I Bodpfxjzubb Nj Afwsdg Cleaner type: airwash Foundation: YES Housing protection: Mn+ rubber Filter: YES Installed power: 241 kW

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Bdsdpfx Aozu T Smjfwsg Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic Bodsxzix Ajpfx Afwsdg • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,137 h, load capacity: 5,500 kg, fuel type: gas, fork length: 2,000 mm, Equipment: cabin, sideshift, For sale is a very well-maintained Clark C55sL LPG forklift, manufactured in 2016. The forklift is in good technical and optical condition and has only been used for 1,137 operating hours. Ideal for use in industry, warehouses, production facilities, or outdoors. Since the last maintenance, the forklift has only been operated for approximately 6 hours. Consequently, it is still in very good condition and ready for immediate use. Technical specifications: Manufacturer: Clark Model: C55sL Year of manufacture: 2016 Drive: Gas (LPG) Operating hours: 1,137 h Load capacity: 5,500 kg at a 500 mm load center Lifting height: 3,300 mm Side shifter integrated Full cabin Work lights Double gas cylinder holder Tires: see pictures Fork length: 2000 mm Note: The UVV (occupational safety) inspection expired in 2024, as the forklift has hardly been used since then. For an additional fee, a new UVV inspection can be carried out, so that the forklift can be handed over ready for use. Inspection and a test run are possible at any time by appointment. All information has been provided to the best of our knowledge and belief. Errors, prior sales, and changes are subject to change. All information is provided without warranty; no liability is assumed for the accuracy, completeness, and currency of the information. The sale is made with the exclusion of any liability for defects in the material, insofar as this is legally permissible. Bdodpfxezr H Szo Afwjg The forklift can be inspected and tested after prior appointment. The price is net plus 19% VAT. Loading onto a suitable transport vehicle can be assisted upon agreement. The transport or collection is to be organized by the buyer.

Condition: used, functionality: fully functional, machine/vehicle number: SX-126-0259-9832 KF, Year of construction: 2016, operating hours: 2,990 h, load capacity: 1,200 kg, lifting height: 4,410 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 1,990 mm, drive type: Elektro, High-lift pallet truck Bdjdpfozfdp Djx Afwsg Chassis number: SX-126 KF Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Polyurethane Rear tire type: Polyurethane Description: Maintenance performed + safety inspection completed

Condition: used, functionality: fully functional, machine/vehicle number: SX 126-0082-8308, Year of construction: 2017, operating hours: 2,447 h, load capacity: 1,200 kg, lifting height: 4,800 mm, free lift: 1,640 mm, fuel type: electric, mast type: triplex, construction height: 2,140 mm, drive type: Elektro, High-lift truck Chassis number: SX 126-0082-8308 Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Bdodpfx Ajzfdpwefwsg Technical condition: very good Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Battery type: PzS Description: Maintenance carried out + safety inspection (UVV)

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 200412480282, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, table width: 1,000 mm, table length: 1,600 mm, year of last overhaul: 2025, Equipment: type plate available, Coordinate measuring machine Zeiss SPECTRUM 10/16/6, year of manufacture 2004, calibrated until 2025, less than 1,000 operating hours since control replacement in 2018. Condition: good, relatively little use, minor transport damage to the granite table (not functionally relevant). Bedpfxezxgmxs Afwjdg Year of manufacture: 2004 (date of manufacture 12/2004) Location: West Saxony Price: on request Technical data: Manufacturer: Carl Zeiss IMT GmbH / Carl Zeiss Inc. IMT Corporation Model: SPECTRUM 10/16/6, U-STONE (granite measuring table) Part No.: 623266.9803.013 Serial No.: 200412480282 Measuring range: X 1,000 mm × Y 1,600 mm × Z 600 mm Measuring software: Zeiss Calypso, Version 6.2.12 Control: replaced in 2018 Probe head: swiveling probe system with extensions/probe holders (see photos) Design: gantry measuring machine, CNC drives Condition/Use: Operating hours since control replacement in 2018: less than 1,000 hours – very little use. Calibration performed in 2025. The granite measuring table has minor, purely optical transport damage (see photos), which is not functionally relevant. Description: For sale is a Zeiss SPECTRUM 10/16/6 coordinate measuring machine with a granite measuring table (U-STONE), year of manufacture 2004. The gantry measuring machine has a measuring range of 1,000 × 1,600 × 600 mm, a swiveling probe system with extensions, and is operated with the Zeiss Calypso measuring software (Version 6.2.12). The control system was completely replaced in 2018 – since then, less than 1,000 operating hours have been logged. The machine is in good technical condition and was calibrated in 2025. The granite table has minor, purely cosmetic transport damage that does not affect its function. Inspection and functional testing at the location in West Saxony are possible by appointment. Price: please request a quote.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Standard Accessories • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator • Rapid Wheel head Retraction • Teach-Input Positioning • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard Bodpfxozmhkns Afwsdg • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training • Instruction Manual

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW 1 x crank press with one ram 16 t Bedpfx Ajmi Rpijfwedg 1 x crank press with one ram 25 t

Condition: used, Year of construction: 1998, plate thickness 16 mm cutting length 4075 mm weight 23 t Bdjdjztfvnjpfx Afwog output 45 kw

Condition: used, functionality: fully functional, machine/vehicle number: SX126-0311-8308, Year of construction: 2021, operating hours: 1,484 h, load capacity: 1,200 kg, lifting height: 5,210 mm, free lift: 1,740 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, drive type: Elektro, High-lift pallet truck Chassis number: SX126-0311-8308 Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Bdodpfx Aozfdqbsfweg Battery voltage: 24V Battery type: PzS Description: Maintenance + statutory testing Maintenance + statutory testing

Condition: used, Year of construction: 1996, turning diameter over bed Ø16 mm mm weight of the machine ca. 2,3 t Bedpfoztfw Esx Afwsdg dimensions of the machine ca. 2045 x 900 x 1685 m

Condition: used, Year of construction: 1986, operating hours: 3,710 h, Equipment: all wheel drive, SCHAEFF MINIBAGGER ZRH 16 WITH QUICK COUPLER, READY FOR USE ----VEHICLE EQUIPMENT * TYPE: ZRH 16 Bdjdpfxezx Itgj Afwog * 3.3 T PERMISSIBLE TOTAL WEIGHT * YEAR OF MANUFACTURE: 1986 * QUICK COUPLER * IMMEDIATELY READY FOR USE * NO BUCKET INCLUDED * EXPORT SALES ONLY WITH A DEPOSIT OF MIN. 500 EUR - 2000 EUR * EXPORT SALES ONLY WITH A DEPOSIT OF MIN. 500 EUR - 2000 EUR ----EXPORT REGISTRATION CUSTOMS EXW WITHIN 10 MINUTES (AUTHORIZED EXPORTER), 5 DAYS, 30 DAYS WITH REGISTRATION PLATES, AND 17-21 DAYS WITH AUSTRIAN REGISTRATION PLATES EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and non-EU countries, a deposit of at least 500.00 EUR / 1,000.00 EUR will be charged. Subject to changes, errors, and prior sale! You can find more vehicles on our website: Sales are made exclusively according to our general terms and conditions – see our website. Important note – important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 14 kg, For sale is 1x Siemens SINAMICS S120 Active Interface Module for 16kW Active-Line Modules, with article number 6SL3100-0BE21-6AB0. Series: SINAMICS S120 Type: Active Interface Module The item comes from stock/spare parts inventory. Bdedpfxozxp Dme Afwsg The optical condition can be seen in the attached pictures. We will gladly provide further technical documentation or detailed images upon request. Inspection and collection are possible by arrangement. Shipping is possible at the buyer’s expense. Subject to prior sale, errors and changes.

Condition: excellent (used), functionality: fully functional, ABB Robotics IRB 6600 Robot 1 x ABB Robotics IRB6600 robot, serial number 66-68813 1 x ABB Robotics IRB6600 robot, serial number 66-68814 1 x ABB Robotics IRB6600 robot, serial number 66-68815 1 x ABB Robotics IRB6600 robot, serial number 66-68816 The IRB 6600 is a powerful 6-axis industrial robot for demanding applications that require flexibility, reach, and reliability. It is available in various configurations and supports payloads from 125 kg to 225 kg with arm lengths of up to 3.2 m. This makes it versatile for use in production environments. Its rear-inclined geometry enables improved accessibility and space-saving integration, especially in machine tending, spot welding, and material handling. The robot features advanced safety technologies such as collision detection, active braking, and path stabilization through the ABB TrueMove and QuickMove systems. Integrated monitoring tools support predictive maintenance, while the robust, IP67-certified design and reinforced structure make it suitable for harsh industrial environments. Bedozm E Rrspfx Afwjdg Note: The IRB 6600 model is no longer manufactured. Service and spare parts are still available for existing installations. -Payloads from 125 kg to 225 kg, reaches from 2.55 m to 3.20 m. -Rear-inclined design for better access and compact integration. -Equipped with active/passive safety: collision detection, path guidance, dual-channel stop. -Integrated load/motion monitoring for preventative maintenance. -0.1 mm repeatability and full IP67 protection for harsh environments. Maximum payload (kg): 225 Maximum reach (m): 3.2 Applications Spot welding, machine tending, material handling Mounting: Floor Environment: Foundry, standard industry Used item – normal signs of wear and tear. Further details, article numbers, and images available upon request. "Sample photos. The actual product may vary." Two-week commissioning guarantee. No further warranty. Spare parts are constantly available in stock. The robot is fully functional and can be inspected upon request. Free loading / ex works. The stated amount is net and applies per robot. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or forwarding costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs abroad on request – please specify country, city, and postal code. Forwarding costs on request – please specify delivery address.