Used Climatic Test Chamber -5°C...+90°C for sale (96,818)

Condition: used, Weiss Type: WK111-600 Fgjdpfx Apsziyxcjted Weiss Climate Test Chamber, Air-cooled Performance Data for Temperature Tests: Temperature range: -5°C to +90°C Temporal temperature fluctuation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min Performance Data for Climatic Tests: Temperature range: +10 to +90°C Humidity range: 10 to 98% r.h. Temporal temperature fluctuation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K (corresponds to temperature gradient): 1 to 2 K Temporal humidity fluctuation: ±1 to ±3% Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Access Ports: 1 access port Ø 50 mm on the left side installed 1 access port Ø 125 mm on the right side installed Power Supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10.0 A Refrigerant: R 404 A Capacity: 600 liters Weight: 540 kg For your security as a buyer, please note the following information! The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Year of construction: 2014, condition: excellent (used), Weiss Technik WK 6'/45-90 Walk-in Climate Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WK 6'/45-90 Year of Manufacture: 2014 Machine Type: Walk-in Temperature and Climate Test Chamber Refrigeration System: Water-cooled Fodpfx Apezibd Tetogd Test Chamber Volume: approx. 6 m³ Weight: approx. 3,560 kg For sale is a used walk-in climate test chamber from Weiss Umwelttechnik GmbH. The system is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and long-term testing of large test specimens. Technical Data Temperature Range: -45 °C to +90 °C Temperature Change (Heating): approx. 1.8 K/min Temperature Change (Cooling): approx. 1.8 K/min Temperature Deviation: ±0.3 to ±1.0 K Climate Range: +20 °C to +90 °C Humidity Range: 15 to 95 % RH Dew Point Range: +4 °C to +81 °C Humidity Deviation: ±5 % RH Thermal Load (Heating): 3,200 W Thermal Load (Cooling): 3,200 W Dimensions Test Chamber Dimensions: approx. 1,500 × 2,600 × 1,500 mm (W × D × H) Housing Dimensions: approx. 2,010 × 5,100 × 2,200 mm (W × D × H) Refrigeration System Type: Water-cooled Refrigerant 1: R452A, 17.0 kg Refrigerant 2: R23, 8.4 kg Cooling Water Connection: R 1½" Cooling Water Pressure: 2 to 6 bar Cooling Water Inlet: +12 °C Cooling Water Outlet: +18 °C Max. Cooling Water Consumption: 15 m³/h Electrical Data Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 70.2 kW Rated Current: 117 A Protection Class: IP54 Noise Level: approx. 70 dB(A) Max. Heat Dissipation: approx. 4.5 kW Load Capacity Floor Load Capacity: 30,000 N/m² (approx. 3,000 kg/m²) Permissible Wheel Load: 1,000 N per wheel (4 cm² contact area) Equipment SIMPAC control system Touch panel operation Walk-in stainless steel test chamber Temperature and humidity control Water-cooled cooling system 4 × 50 W test chamber lighting Emergency opening from the inside Test chamber door with safety lock Cable glands Documentation / Operating manual Electrical diagrams available Application Areas Temperature testing Climate testing Environmental simulation Material testing Automotive Battery testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of Delivery Weiss Technik WK 6'/45-90 Climate Test Chamber Documentation / Operating manual Electrical diagrams Accessories as shown in the pictures Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: excellent (used), Memmert Type: CTC 256 Memmert Climate Test Chamber CTC 256 Temperature & Humidity Test Chamber Industrial Quality For sale is a high-quality climate test chamber / temperature test chamber from the manufacturer Memmert, model CTC 256. The unit originates from professional use and is ideally suited for laboratories, industry, research, development as well as quality assurance. The Memmert CTC 256 is designed for precise simulation of temperature and climatic conditions. It enables both cooling and heating processes and – in this configuration – humidity control. This makes the unit perfect for material testing, aging tests, climatic stress tests, and long-term experiments under defined environmental conditions. Thanks to the integrated control system, complex test programs with temperature and time sequences can be set. The forced air circulation system ensures uniform temperature distribution in the chamber interior. Via the available interfaces, measurement data can be documented and processed externally. Features: Temperature and climate test chamber (heating & cooling) - Humidity control Electronic controller with programmable function Forced air system for even temperature distribution Internal protocol memory USB and Ethernet interface Additional 230 V socket Feed-through (side) Water container system (humidification/condensate) Mobile on castors Technical Data: Manufacturer: Memmert Model: CTC 256 Device type: Climate test chamber Temperature range: approx. -42 °C to +190 °C Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Power consumption: approx. 7000 W Protection class: IP20 Fedjy D Ni Aspfx Aptsgd External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of delivery: (see photo) Memmert CTC 256 climate test chamber Removable shelves Water canister Documents Delivery as shown (Specifications and technical data are subject to change and error!) If you have any further questions, we would be happy to assist you by phone.

Condition: excellent (used), Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Cabinet Water-cooled A professional emission test chamber is offered for sale Weiss Technik EmissionEvent VOC/240 (Year of manufacture: 2018) from an industrial laboratory and testing operation. The device is designed for conducting standardized emission tests under precisely controlled temperature, climatic, and process conditions, and is built for continuous use in laboratories, industrial settings, and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions. It analyses which substances are released into the air by a given material. Typical applications include: - Emission testing of plastics, components, materials - Automotive interior material testing (odor / pollutants) - Building products & furniture emission measurement - Packaging, textiles, adhesives, paints - Quality control and standard testing (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test space using a carrier gas (e.g. nitrogen or air) and can subsequently be analyzed using appropriate measuring equipment. Device features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurement - Automatic process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade construction (suitable for laboratory and continuous operation) Technical data for temperature testing: - Temperature range: +20 to +130 °C Fsdsziyz Ropfx Aptsgd - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Temperature change rate (according to IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min - Temperature change rate (average, with enhanced heating and cooling capacity): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Technical data for climate testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Relative humidity range: 5 to 95% RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to 3% RH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test space): Emission test chamber: 200 l Gross test chamber volume: 240 l Net test chamber volume: 208 l Max. test sample load: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10% / 50 Hz Nominal power: 12.1 kW Nominal current: 30 A Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Important information for you as the buyer: The following procedures are carried out on the chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, a documented trial run is carried out Condition: used Scope of supply: (see picture) (Technical data and specifications subject to change and errors!) For further questions, feel free

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components Fgsdpfx Apeziiypetjd 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: excellent (used), Heraeus Vötsch Type: VCS 7018-5 Climate testing chamber with humidity, water-cooled Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Specifications for temperature tests: Temperature range: -70°C to +180°C Temporal accuracy: ± 0.1 to ± 0.5 K Spatial accuracy: ± 0.5 to ± 2.0 K Temperature gradient: 1 to 4 K Temperature change rate according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Specifications for climate tests: Temperature range: +10 to +95°C Humidity range: 10 to 98 % RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation: ± 1 to ± 3 % RH Dew point range: -3 to +94 °C Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 10 kW Rated current: 21 A Fuse rating: 32 A slow-blow, on-site Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: Fgsdpfx Ajziiwhopted 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber, explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cold/Heat operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98 % RH Temperature change per unit of time: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse (on customer's side): 32 A, slow-blow Permissible weight of test specimens: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (Evaporator of the air conditioning system has been replaced) For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Fjdpfxezh D Rye Aptegd Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate test chamber Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Time-related temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Time-related temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-related humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Fgjdpfxjzg Tx Rs Apted Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Condition: excellent (used), We are offering a Weiss climate testing chamber. Water-cooled. Test chamber lighting: halogen bulb 24V, 50W. Data for temperature tests: Temperature range: -40°C to +180°C. Temperature deviation over time in the center of the usable space: ± 0.3 to ± 0.8 K. Temperature deviation spatially: ± 0.5 to ± 2 K. Temperature change rate: Heating: 10 K/min. Cooling: 12.5 K/min. Heat compensation at +20°C: 8000 W. Heat compensation at -20°C: 3000 W. Data for climate tests: Temperature range: +10°C to +95°C. Humidity range: 10 to 98 % RH. Temperature deviation over time in the center of the usable space: ± 0.2 to ± 0.5 K. Temperature deviation spatially: ± 0.5 to ± 1 K. Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH. Test chamber dimensions: height 950 mm, width 760 mm, depth 650 mm. External dimensions: height 2025 mm, width 1090 mm, depth 2480 mm. Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz. Rated current: 24 A. Rated power: 16.0 kW. Refrigerant: R452A. Weight: approx. 900 kg. Type: WK-480/40/10. For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components. 2. If necessary, new filling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers undergo a documented test run. Condition: used. Scope of delivery: (See image). Fgsdpfx Aszgaipjptsd (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Fgodezcxbwjpfx Aptjd Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Condition: excellent (used), ERICHSEN CORROCOMPACT 618-1000 Corrosion Testing System Manufacturer: ERICHSEN GmbH & Co. KG Type: CORROCOMPACT 618-1000 Year of manufacture: 2017 Machine type: Corrosion testing system / Climate change testing system Test chamber volume: 1,000 liters For sale is a used ERICHSEN CORROCOMPACT 618-1000 corrosion testing system with a separate climate control unit and a Siemens SIMATIC touch control. The system was developed for professional corrosion, climate change, salt spray, and condensation testing and is ideally suited for testing laboratories, the automotive industry, research institutions, and quality assurance. Technical data: Model: 618-1000 Series: CORROCOMPACT 617 Serial number: 16855/005 Test chamber volume: 1,000 liters Power supply: 3+N+PE AC 400 V / 50 Hz Connected load: 5 kVA + 9 kVA (climate control unit) Fuses: 3 × 32 A Compressed air connection: 6–10 bar Deionized/demineralized water: 3–6 bar Control: Siemens SIMATIC HMI Touch CPU version: 2.2.3 HMI version: 2.2.3 Climate control unit: Manufacturer: ERICHSEN Type: VS-Bo-1,1-40-L-S Year of manufacture: 2014 Serial number: 14-2430 Refrigerant: R507 Connected load: 3.3 kW Max. operating current: 8.4 A Compressor power: 1.3 kW Evaporator fan: 0.18 kW Condenser fan: 0.28 kW Steam humidifier: 1.6 kW Heater: 5 × 0.2 kW Dimensions: External dimensions (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Height with hood open: approx. 2,500 mm Internal dimensions (W × D × H): approx. 1,190 × 815 × 1,040 mm Equipment: Siemens SIMATIC touch panel Separate climate control unit Fedpfx Apezk A Ebotegd 1,000-liter test chamber Climate change testing Salt spray testing Condensation testing Automatic test programs Compressed air connection Deionized water connection Salt solution connection Exhaust connection Floor drain Transport data: Test chamber (W × D × H): approx. 2,100 × 1,350 × 1,670 mm Climate control unit (W × D × H): approx. 1,700 × 900 × 1,900 mm Weight of test chamber: approx. 600 kg Weight of climate control unit: approx. 500 kg Total weight: approx. 1,100 kg Condition: Used The system was last used in an industrial setting. Optical condition as shown in the pictures. Scope of delivery: ERICHSEN CORROCOMPACT 618-1000 Climate control unit VS-Bo-1,1-40-L-S Siemens SIMATIC HMI Touch Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, running hours: 4748 h Offered for sale is a used temperature test chamber from Weiss Technik. The chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Explanation of the model designation: T = temperature test chamber 1000 = approx. 1000 liter volume 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculation air fans - Touch control (WEBSeason) - Viewing window - Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Fodpfx Apsy Dciijtsgd Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg Important safety information for buyers: The following processes are carried out on the chambers we offer before delivery: 1. Function check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), Memmert Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Operating range: at least +10 °C above ambient temperature Setting accuracy: – up to 99.9 °C: 0.1 °C – from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-conductor) Interior and capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of inserts: 8 Load per insert: 30 kg Maximum total load: 300 kg Interior: stainless steel, all-round heating External dimensions and weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and regulation Control: ControlCOCKPIT TwinDISPLAY Controller: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculating air: adjustable in 10% steps Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and undertemperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Fgsdpfxsy T Icto Apted Rear has 2 openings each with approx. 12 cm diameter Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), LDS / CTS Vibration Testing System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker system, an LDS SPA30KCE power amplifier, an IMV K2+ vibration controller, and a CTS climate chamber. Suitable for combined vibration and climate testing in the automotive, aerospace, electronics testing, research & development, material testing, and industrial quality assurance fields. The blue hall crane / portal crane visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V850-440 LPT 750C Air-cooled electrodynamic vibrator. Armature diameter: 440 mm Frequency range: DC – 3000 Hz Resonant frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal load capacity: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Type: SPA30KCE Class-D high-performance switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. input power: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Amplifier weight: approx. 550 kg Controller IMV K2+ Vibration Control System Multi-channel vibration controller including Dell Precision PC system. Functions: Sine Resonance dwell Limit control Random Sine-on-random PSD limit control Shock Scheduler System monitor CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: CV-70/1100-5 Year of manufacture: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Rated voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerant: R452A: 6.8 kg R23: 2.1 kg Equipment Combined climate and vibration testing Slip table / Fixturing table included Completely wired testing system Service and maintenance documentation available Slip table: Mounting area: approx. 760 x 850 mm Threaded insert spacing: approx. 100 mm Dimensions / Weight Large industrial system / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Transport exclusively via a suitable heavy-duty transport company. Dimensions, weights and technical data are partially estimated or not completely known. Condition Used industrial system from industrial use. Optical condition, see pictures. Inspection and testing on site possible by arrangement. Scope of supply LDS V850-440 LPT 750C shaker system LDS SPA30KCE power amplifier IMV K2+ vibration controller Dell Precision PC system CTS climate chamber CV-70/1100-5 Fgedjy Sy Npjpfx Aptod Slip table / Fixturing table Accessories and documentation as shown in the pictures Not included in the scope of supply: Blue hall crane / portal crane. Loading possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours: 5128 h For sale is a used temperature test chamber from Weiss Technik. This chamber is designed for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters capacity 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your security as a buyer, please note the following information: The following steps are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant Fgsdpfx Ajy Dck Teptsd 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see pictures) (Specifications and technical details subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Year of construction: 2021, operating hours: 5,018 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h Fgodpfx Apoy Dclqetsd For sale is a used temperature test chamber from Weiss Technik. The test chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation meaning: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculation fans - Touch operation (WEBSeason) - Viewing window - Temperature control (automatic/manual) Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3-phase Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as the buyer, the following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications!) We are happy to answer any further questions by phone.

Year of construction: 2020, operating hours: 6,126 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70/5, water-cooled, 1000 liters, year of manufacture 2020, total operating hours: 6,126 h. Description: For sale is a high-quality climate test chamber from Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. This unit is designed for the simulation of temperature conditions and is ideally suited for: - Material testing - Electronics inspections - Environmental and aging tests - Quality and endurance tests The chamber can achieve both very low temperatures down to approx. -70 °C and high temperatures up to +180 °C, and can change temperatures at a defined rate (temperature ramps). Precise control allows for reproducible testing conditions. Operation is user-friendly via an integrated touch panel. Features: - Fast temperature changes (up to 5 K/min) - Even temperature distribution in the test space - Water-cooled system - Industrial standard – robust construction - Maintenance indicator and operating hours counter included Technical Data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70 °C to +180 °C Temperature change speed: up to 5 K/min High precision & stability: Temporal temperature deviation: ±0.1 to ±0.5 K → very stable temperature over time Spatial deviation: ±0.5 to ±1.0 K Temperature gradient: ≤ 2.0 K This makes the chamber ideal for demanding testing processes with high repeat accuracy. Test chamber dimensions: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Fgedpfx Ajyxm Uljptsd Side port: 50 cm / 125 cm Electrical data: 400 V / 3~ / 50 Hz Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A (approx. 2.9 kg) R23 (approx. 1.3 kg) Weight: approx. 1,200 kg For your security as a buyer, please note the following: The following checks are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered for you by phone.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, total operating hours: 4748.2 h Fjdpfx Apoy Dd Nqstsgd For sale is a used temperature test chamber from Weiss Technik. This chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, the following work is carried out on our chambers prior to sale: 1. Functional inspection and replacement of any necessary components 2. New filling with legally compliant refrigerant when required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5 water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a used temperature test chamber manufactured by Weiss Technik. This chamber is utilized for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation breakdown: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment/features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note the following information! The following work is carried out on our offered chambers beforehand: 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate Fgjdoy El Ttjpfx Aptsd 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data; specifications may vary!) If you have further questions, we are happy to assist you by phone.

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Fedpfey Dclwsx Aptegd Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic / manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see photos) (Specifications and data are subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.

Condition: excellent (used), CTS Type: C-40/350 Air-cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C Fjdpfx Aszizmzoptsgd - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may influence performance data. Technical Specification: - Refrigeration unit: Air-cooled, low-noise, fully hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: Stainless steel, support surface 620 x 600 mm - Maximum load per shelf: 35 kg - Total load with maximum number of shelves: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test sample control Dimensions: - Test volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C Fgsdpfx Ajzizmuoptod - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A Fgjdpfxjzizmno Apted - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Fgodozizmbepfx Aptsd Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Weiss Model: WK3-340/40 Weiss Climate Test Chamber, Air-Cooled Temperature Testing Volume: 335 liters Test Chamber Dimensions: Fgjdpfx Aeziyygsptjd Internal Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum Temperature: –42°C Maximum Temperature: +180°C Temperature Change Rate, Cooling: 4 K/min Temperature Change Rate, Heating: 3.2 K/min Temperature Deviation Over Time: ± 0.1 to ± 0.5 K Temperature Uniformity Spatially: ± 0.5 to ±1.5 K Climate Testing: Temperature Range: +10°C to +95°C Dew Point Range: -3°C to +94°C Humidity Range: 10 to 98% RH Temperature Deviation Over Time: ± 0.1 to ± 0.3 K Temperature Uniformity Spatially: ± 0.5 to ± 1 K Humidity Deviation Over Time: ± 1 to ± 3 % RH Halogen Lamp: 2 x 24V, 50W Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 4.1 kW, Rated Current: 14 A Refrigerant: R-404A Weight: approx. 515 kg For your security as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications reserved!) Further questions can be answered by phone.