Used Cms Spa Agil Lam for sale (12,969)

Condition: as good as new (ex-display), Year of construction: 2025, CMS Agil Lam Cutting table for Laminated Glas Glas Nsdpfx Aswd If Neg Djla Max. workable Size: 3.810 x 3.300 mm Thickness: 8+8 mm Min. Glas Thickness: 2+2 mm

Condition: as good as new (ex-display), Year of construction: 2026, CMS agil tr Cutting table for Glas Max. workable Size: 3.810 x 2.600 mm Thickness: 2-19 mm Speed: 0-200 m/min Acceleration: 10 m/s² Options: - tilting table Nodpfx Aopygwijg Dela - Toolmagazin with 5 slots - Operatorpanel incl. Software

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks Nljdpfx Asxqzmkog Dsa - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: excellent (used), For sale: Professional modular T-slot plate designed for securing workpieces during machining. Ideal for use with milling machines, grinders, and other workshop machinery. The modular system with blocks allows highly flexible and rapid setup of clamps. Various components can be mounted and adjusted to suit the workpiece. Dimensions: 77 x 40 cm. Condition: used, in good technical condition. Shows normal signs of use. Fully functional. The robust steel construction ensures stability and precision during operation. Nlodpoyyqktofx Ag Dsa

Condition: used, Multilame parakeets with a 30 cm mat and 20 HP motor Nsdpjytr Sksfx Ag Dsla

Condition: used, mileage: 118,156 km, power: 478 kW (649.90 HP), fuel type: gasoline, gearing type: automatic, first registration: 06/2018, emission class: euro6, color: grey, driver cabin: other, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, soot filter, traction control, ---- FIXED PRICE Please do not call regarding price negotiations FIXED PRICE Outside of regular business hours, you can reach Mr. Mescheder Jr. directly at Offered here is a Lamborghini Urus in immaculate condition, finished in Girgio Lynx Grey, with an extensive range of features. This vehicle was driven almost exclusively by the CEO of Lamborghini. All scheduled services were carried out directly at the factory in Santa Agata. The latest service was performed 300 km ago, in September 2021, at Lamborghini Cologne. This unique vehicle is in as-new condition and, of course, accident-free. Additionally, the vehicle has received a two-stage ceramic coating. The vehicle is currently driven and being sold by our managing director. Your direct contacts for this vehicle are: Mr. Mescheder and Mr. Brockmann ---- Comfort * 4-zone automatic climate control * Advanced 3D Bang & Olufsen sound system * Ambient lighting package * Fully electric comfort seats with massage function * Head-up display * 22" diamond-finished wheels * Lamborghini off-road modes * Full ADAS system * Electric windows * Electric seat adjustment * Seat heating (4x) * Adaptive cruise control * Speed limiter * Central locking * Air suspension * Rain sensor * Light sensor * Electric mirrors * Seat ventilation * Top-view / 360° camera * Rear-view camera Nljdpoyhcbrefx Ag Doa * Hill-start assist * Massage seats * Keyless entry * Auto-dimming interior mirror Safety * Airbag * ESP (Electronic Stability Program) * Alarm system * Electronic immobilizer * Tire pressure monitoring system * Auto-dimming interior mirror * Blind spot assist * Drowsiness detection system * Daytime running lights * Night vision assist * Emergency call system * Autonomous emergency braking Exterior * Sunroof * Parking sensors * Roof rails * Summer tires * Panoramic roof * Electric tailgate If a new technical inspection (TÜV) is required, we are happy to provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV, DGUV, SP, or UVV inspection. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer a viewing and inspection of the vehicle to ensure buyers have an accurate understanding of its condition and suitability. Viewings and inspections are possible and expressly desired at any time by prior appointment. All information provided is without guarantee. We do not accept liability for errors or incorrect information in this offer. The buyer is responsible for independently verifying the condition and equipment of the vehicle/goods. Subject to changes, prior sale, and errors.

Condition: used, Year of construction: 2003, 2003 CMS, model Pentax 4.50/T/PX5, CNC cutter, gantry bridge type, working table area 205.5" x 55.5", pendant control, spindle speed 18,000 RPM, spindle connection HSK63E, double automatic tool changer with 16 places, chip removal, Zongo V-Link CNC controls, 480V, 3 phase, includes EATA industrial chiller, (1) 2003 Travaini pump system, model 0-616VN1A-400, and (1) Becker rotary vane vacuum pump with filter, includes control cabinet, winning bidder responsible for proper removal. Nsdpfxoxdc Uco Ag Dsla

Condition: used, Year of construction: 1995, 1995 CMS, model NC-P.F./102-2TCU, CNC, X-travel 141.7", Y-travel 63.0", Z-travel 15.7", dual tables with individual plates, plate sizes are 60" x 60", 10 HP, spindle speed up to 18,000, Allen Bradley control station, 480V, 3 phase, bridge gantry style design, 480V, 3 phase, S/N 1397, winning bidder responsible for proper removal, also includes Becker Vacuum rotary vane pump and filter, and control cabinet. Nlodpfexdddfsx Ag Dja

Condition: used, Year of construction: 2007, High-pressure pump with 3 pistons for waterjet machines Control cabinet for the high-pressure pump 5-axis cutting head with complete assembly Nlodpfxjxix Dks Ag Dja

Condition: ready for operation (used), Year of construction: 2012, Offered is a horizontal flow wrap packaging machine (HFFS). Material types: heat-sealable films (BOPP, PET/PE, Alu/PE), cold-seal films, film width max.: 500mm, roll diameter max.: 350mm, core holder: 75mm, product dimensions X/Y/Z: 40mm-350mm/10mm-220mm/0mm-100mm, production output: 120-150bags/min. Viewing possible by appointment. Nlodpey Ax Uljfx Ag Dsa

Condition: good (used), Year of construction: 2017, functionality: fully functional, CMS Brembana Vertec – Vertical CNC Glass Milling & Drilling Machine Available from Week 17 We offer a well-maintained CMS Brembana Vertec milling and drilling machine, designed for high-precision vertical processing of glass. This machine is ideal for companies operating in architectural, interior, or technical glass sectors, requiring milling, drilling, and edge processing in a single setup. Key Features - Vertical CNC machining centre for glass - Processing direction: left to right - Suitable for milling, drilling, countersinking, and edge processing - Compact footprint with high productivity - Front and rear tool magazines (9 positions each) - Automatic tool changer - Integrated lubrication and cooling system - CNC control system with user-friendly interface - Robust industrial build quality (CMS Italy) Working Range - Max glass length: 3200 mm - Max glass height: 2200 mm - Min glass length: 420 mm - Min glass height: 180 mm Technical Information - Manufacturer: CMS (C.M.S. S.p.A., Italy) - Model: Brembana Vertec Mill - Voltage: 400V / 50-60Hz - Phases: 3 + N - Full load current: 31A - Short-circuit rating: 10kA Nlodpjyzf Rdsfx Ag Dja - Machine type: Vertical glass processing centre Condition - Machine is in good working condition - Regularly maintained - Can be inspected under power by appointment Included - Tool holders and selected tooling (as shown) - Spare parts cabinet (optional / negotiable) - Documentation (if available) Availability - Available from Week 17 - Location: Netherlands Additional Information This machine provides a reliable solution for workshops seeking to improve efficiency in glass processing with a vertical setup. Suitable for both small series and serial production. We also have videos of the machine in operation. Please inquire for further information.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: M0616326, We are selling an extraction system including many associated ducts. The extraction unit is in good condition and has only seen limited use. Manufactured by Coral SPA, Italy, model PRN630, equipped with a powerful 37 kW motor. Suction duct diameter 600 mm: - 1970 mm, eight pieces - 1520 mm, one piece - 980 mm, two pieces - 500 mm, three pieces - 90° elbow, two pieces - 45° elbow, two pieces With branches: - 140 mm diameter, 500 mm length, one piece - 220 mm diameter, 500 mm length, one piece - 260 mm diameter, 500 mm length, two pieces Reducer from 600 mm to 450 mm, one piece Suction duct diameter 450 mm: - 1970 mm, three pieces - 990 mm, two pieces - 500 mm, one piece - 90° elbow, two pieces Suction duct diameter 350 mm: - 1979 mm, three pieces - 1500 mm, one piece Distributor, 500 mm x 250 mm, one piece - 500 mm length, 125 mm diameter, one piece 45° elbow, four pieces Nlodpfoyx Dhcox Ag Dja Reducer from 450 mm to 350 mm, one piece The extraction system can be inspected by appointment. Pickup or shipment by truck available.

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, machine/vehicle number: V04PL0099, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: Automatic palletizing machine for ceramic tile packages Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Njdpfxeyy A Hgj Ag Dola Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: used, Year of construction: 2002, machine/vehicle number: 2880, functionality: fully functional, travel distance X-axis: 4,550 mm, travel distance Y-axis: 1,850 mm, travel distance Z-axis: 500 mm, We offer this used 5-axis machine CMS P.F./132-2TUCU, year of manufacture 2002. Manufacturer: C.M.S. S.p.A. Nledpfxoyx S I Ds Ag Dsa Year of manufacture: 2002 Model: P.F./132-2TUCU Serial number: 2880 The machine is in perfect working condition. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2026, operating hours: 700 h, CMS Tecnocut Easyline like new Cutting Area / Axis Movement Nedstq Eh Dopfx Ag Dola X-Axis: 2.000 mm Y-Axis: 4.000 mm Z-Axis: 150 mm C-Axis: Optional B-Axis: Optional Options: - 5-Axis cutting head - additional cutting head - Sanddoser - Dredge for abrasive - Antikollisionsfeeler - CAD/CAM IGEMS

Condition: reconditioned (used), functionality: fully functional, Electrospindle 13.5 kW, brand CMS, manufacturer codes M0402501 and 7142R Nledpfx Aeyviuceg Dea

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 150 mm Nlodpfx Ajxxldcjg Dja included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: ready for operation (used), Year of construction: 1995, Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible. Nlsdpfsytgnmex Ag Dea

Condition: excellent (used), Year of construction: 2018, operating hours: 240 h, functionality: fully functional, machine/vehicle number: Maschinen-Nr. 8914, working range: 4,250 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 1,000 kg, type of input current: three-phase, input voltage: 400 V, table length: 4,650 mm, table width: 2,050 mm, pressure: 4,150 bar, travel speed (max.): 40,000 mm/min, table load: 1,000 kg, total height: 3,800 mm, total length: 6,700 mm, total width: 3,000 mm, compressed air connection: 8 bar, pump pressure: 4,150 bar, overall weight: 4,500 kg, product height (max.): 350 mm, power: 30 kW (40.79 HP), We are offering this very well-maintained CMS brembana idroline S waterjet cutting machine, year of manufacture 2018, for immediate sale. This is a rare opportunity to acquire a machine with extremely low operating hours—only 240 operating hours!—in excellent condition. If you are looking for a robust, reliable precision machine equipped with a 5-axis head, including Easy-Stone software and a 15" TFT color display with membrane keyboard, this is the right choice. Nodpfx Ageyti Iij Dsla It features the CMS Powder Free System and protected guides against water and dust. The rack and linear guides are housed within the structure and protected by labyrinth sealing systems. The machine has a gantry bridge construction, allowing workpiece supports up to 1000 kg/m². Machine weight without water is approximately 4500 kg. It is fitted with lifting doors—one at the front and one at the rear—ensuring no splash water or abrasive ends up on the workshop floor. Sand is removed from the water tank by means of a chain conveyor. The abrasive medium feeder can handle up to 330 kg of sand, and the tank holds 8,000 liters of water. The unit is equipped with a Greenjet EVO high-performance pump: 4150 bar / 30 kW / 40 HP / 400 V +/-5%, 50-60 Hz. Manufacturer: CMS Model: brembana idroline S Year of Manufacture: 2018 Machine Type: Waterjet cutting machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC machining center Power 500/150 PX5 operating unit 1 Disc magazine with 16 positions Nlodpfx Asytyfrsg Dsa OSAI S510 numerical control ALPHACAM software Work surface consisting of 2 tables Electrical cabinet complete with air conditioning Set of channels and suction trays for chip collection

Condition: ready for operation (used), Year of construction: 2009, Travelling gantry machining centre X-axis working area: 2500 mm Y-axis working area: 1000 mm Z-axis working area: 700 mm Nedpfsynz N Usx Ag Dsla 5-axis electrospindle 6-position tool changer Immediately available

Condition: ready for operation (used), Year of construction: 1999, A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible. Nledpfx Ajwhfmreg Dsa

Year of construction: 2004, operating hours: 8,000 h, condition: repair required (used), functionality: not functional, machine/vehicle number: GLCI000199, Granite base measuring 900 mm x 1500 mm with a thickness of 250 mm, featuring a gantry structure and Z-arm equipped with a Renishaw PH10MQ probe head and Renishaw PHC10-2 probe head controller. All listed components are functional and can operate independently. Currently, the machine is non-operational due to the absence of the B3C controller, which processes data from the machine and transfers it to a PC. All axis scales and the probe head are fully operational. The equipment only requires a retrofit of the controller to become functional. Last calibration according to ENAC standards was in February 2019. (E = 1.9+3L/1000). Unused since 2020. Removal and transport are at the buyer's expense unless otherwise agreed and are not included in the sale price. Nsdeyh H Dhjpfx Ag Dsla

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 6310, CNC – rotary-head bridge saw SPRINT 456 Vacuum manipulator 500 kg X-axis 4,150 mm Y-axis 4,550 mm Z-axis 600 mm Spindle drive motor 18.5 kW Drilling unit with 1/2" left-hand thread Software EasyCut / EasyStone Premium Worktable 4,140 mm x 2,000 mm (tilting table) Additional table extension 4,140 mm x 1,200 mm Underslung saw Steel foundations Slab thickness measuring unit Saw blade measurement Air conditioning Slab digitization system Nledjyhlc Sopfx Ag Dja Spray bar

Condition: excellent (used), functionality: fully functional, Working area: 4840 mm x 1500 mm Electrospindle: 12 kW, ISO 30 Nlsdpfxsyinp Ne Ag Doa Automatic tool changer: 8 positions Blade diameter: 250 mm Pendulum machining Number of vacuum pumps: 2, capacity: 300 m³/h