Used Cnstamp 30 Degree H104Mm for sale (26,992)

Condition: new, 30 degree press brake punch H104mm R0.8mm L835mm Prjdpfeihuvvox Amxob

Condition: new, Press brake punch of amada/promecam style Prjdpoin I Dtjfx Amxsb 30 degree R0.6mm, H104mm, L835mm, L835mm segmented

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal Predpoz Enbbsfx Amxjb :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: good (used), 1 x 90 degree conveyor belt on stainless steel stand with wheels. Pedpowvg Umefx Amxorb Technical specification: Motor manufacturer - SEW Eurodrive. Belt width - 910 mm W x 990mm H. Belt type - modular. Footprint dimensions - 2300mm x 2550mm (motor box to far side) X 965mm H. Electrical requirements - 3 ph. Video available on request.

Condition: new, total height: 2,600 mm, overall weight: 7,000 kg, Main technical indicators: 1. Maximum processing width: 1300mm 2. Processing thickness: 0.5-100 mm 3. Minimum processing size: ≥50×50 mm 4. Feeding speed: 0.5-6m/min 5. Prsdszwmpkjpfx Amxjb Roller brush speed: 8-20r/s 6. Revolution speed: 8-12r/s 7. Rated power: about 88KW 8. Abrasive belt size: 2200×1620 mm 9. Sand roller size specifications: Φ300×400 mm 10. Worktable height: 900-980mm 11. Equipment noise: ≤ 85 dB 12. Dust removal efficiency: ≥ 85% 13. Required vacuum air volume: 5000 cubic meters/hour 14. Control system: Siemens PLC CNC

Condition: used, machine/vehicle number: 008701, Max working length: 2740 mm Max working width: 1240 mm Membrane: yes No of positions for the rolls: 2 No of work tables: 1 Pedpezq Urtofx Amxorb

Year of construction: 2020, operating hours: 5,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 25140, Equipment: CE marking, Secondary screen with two decks, 1200 x 2500 [mm], surface area 3.0 [m2], weight 1400 [kg], polyurethane mesh, square mesh sizes of 65 and 5 [mm]. Side tensioning, speed 900 [min-1], inclination 7°, 5.5 [kW] electric motor, pulley, V-belt, protective housing on the drive side and opposite bearing, compression springs. Machine sold without a chassis. Upon request, we can manufacture a custom chassis with the included chutes. Podpfx Amjz Dkxysxorb

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller model: WinMax, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 508 mm Travel range, Z-axis: 610 mm Spindle speed: 12,000 rpm Pedpfxez Ahx Do Amxorb Table area: 1,020 × 510 mm Table load capacity: 1,500 kg MACHINE DETAILS Control system: WinMax EQUIPMENT Internal cooling system (ICS) Fourth axis

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor left 30°-1270-1100-IR900 RA2303 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Podpfet D R R Ssx Amxsrb Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Pedpfot D R R Ejx Amxsrb Inner radius (IR): 1200 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,4 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Psdpok Abuiofx Amxerb Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale and available immediately: Used PICOT rolling machine Year: 2019 Type: RCS235-30 3 motorized rollers Maximum length: 3100 mm Maximum rolling thickness: 8 mm Maximum nibbling thickness: 6 mm Roller diameter: 235 mm Pjdpfx Amsz D Suvoxjrb Digital roller position display

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, total width: 1,200 mm, total length: 4,800 mm, total height: 2,190 mm, operating pressure: 220 bar, warranty duration: 3 months, overall weight: 6,800 kg, Reinforced for processing ferrous materials. Psdpez D Tttofx Amxsrb Includes a crushing device at the end of the jaw to process bulky objects. TECHNICAL CHARACTERISTICS – Blade length: 750 mm – Clamping: hydraulic – Clamping length: 700 mm – Control: automatic, semi-automatic and manual, with safety pedal, according to CE standard; 3 emergency stop switches – Power supply: 440 Volt – Electrical power: 30 HP – Cutting capacity: solid round Ø 80 mm (St37) – Work table height: 1170 mm – Oil tank: 1000 liters – Number of strokes: 10 to 30 strokes per minute – Pump: self-regulating hydraulic pump – Control unit: automatic – Dimensions: 4,800 x 1,200 x 2,190 mm – Weight: Approx. 6,800 kg

Year of construction: 2010, condition: like new (used), functionality: fully functional, MFT 30/300S Set – Used Professional Equipment For sale, a professional set in excellent condition, ready for immediate use. The set includes: MFT 30/300S Big Bag FAS 300 with mobile suction unit This set provides a complete solution, ideal for professionals seeking high-performance, robust, and operational equipment for use in a workshop or on a construction site. Optional: Rapid Vario 70 Primus available as an additional unit for an extra €2,600. The equipment has been carefully maintained, offering excellent value for money compared to new equipment. Sale as a set is preferred. Predpfx Aozncrpsmxsb

Condition: good (used), Year of construction: 1997, functionality: fully functional, Specifications Manufacturer MAZAK Model SQT 30MS Year 1997 Condition Used Prsdpfx Ajvk Ewkomxeb Description MAZAK SUPER QUICK TURN 30MS CNC SUB SPINDLE, 'C' AXIS, DRIVEN TOOLING LATHE WITH MAZATROL T PLUS CONTROL Kitagawa B-212 3 Jaw Power Chuck. Maximum Swing Ø560mm. Maximum Swing Over Cross Slide Ø500mm. Maximum Turning Ø413mm. Distance Between Spindles 1,035mm. Main Spindle Bore Ø88mm, Sub Ø61mm. Axis Travel 'X'=244mm, 'Z'=1,035mm, 'B'=1,067mm. Maximum Main & Sub Spindle Speeds 3,000rpm. Maximum Milling Spindle Speed 1,500rpm. 12 Station Turret. TOOLINGS INCLUDED WHICH WERE USED IN THE WORKSHOP AND EQUIPMENT FROM PHOTOS WEIGHT 6700 KG DIMENSIONS: LENGHT 4010 mm WIDE 2100 mm HEIGHT 2160 mm

Condition: used, mileage: 224,000 km, power: 96 kW (130.52 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,400 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,825 mm, loading space width: 1,230 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Docking station (MyFord Dock), vehicle without vinyl flooring in load/passenger compartment, 240 A alternator, LED cargo area lighting, smoker's package, sliding door on the left side of the load/passenger compartment, start-stop system, AGM battery 80 Ah (2 batteries) Additional equipment: Psdpsz D Hd Eefx Amxorb Driver's airbag, traction control system (ASR), audio system: radio with USB and Bluetooth hands-free system, integrated indicator in exterior mirrors, on-board computer, entry lights, electronic brake-force distribution (EBD), electronic traction control, driver assistance system: hill start assist, driver assistance system: side wind assist, lockable glove compartment, rear wing doors without glazing (180-degree opening angle), interior pollen filter, body type: high-roof panel van, body variant: medium-height roof, high load compartment partition behind driver and passenger, without window but with lower through-loading option, steering column (steering wheel) adjustable for height and reach, truck registration, model update, engine 2.0 L - 96 kW TDCi CAT, parking assistance system, front and rear parking sensors, wheelbase 3300 mm, spare wheel with road tires, low emissions according to Euro 6d-TEMP standard, gear selector/shift knob in leather, windshield wipers with interval control, adjustable, H4 headlights, sliding door right side of load/passenger compartment, mud flaps front and rear, Visibility Package 2, Seat Package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, Seat Package 25: driver's seat (4-way adjustable) - passenger double seat - in velour, steel rims 6.5x16, partly painted bumpers, Style color package, LED daytime running lights, Trend, tinted glazing, half-height trim in load/passenger compartment, side lashing rails in load compartment, lashing points (8), slightly tinted heat protection glazing Cooling system: Special equipment: For pharmaceutical transport (PHARMATRANSPORT) Transcool Multi-temperature system With 3 compartments: -30°C, +22°C, +4°C Standby cooling 220V Payload: 700 kg Vehicle is in good condition! This is a take-away price without TÜV (technical inspection).

Condition: good (used), Year of construction: 2010, functionality: fully functional, Matec 30 L, Year of manufacture: 2010, Control system: Heidenhain iTNC 530, Travel range X/Y/Z: 1300/600/700 mm, Spindle speed up to 12,000 rpm, Tool holder: HSK 63 - A, Electric handwheel, Coolant pressure: 20 bar, Paper band filter, Coolant capacity: 80 liters, Full enclosure for the working area, Direct measuring systems, Pjdpfez Dgr Nex Amxerb Chip conveyor, Bellows with steel lamellae, 3D measuring probe, Laser measuring device.

Condition: used, Year of construction: 2011, operating hours: 1,878 h, machine/vehicle number: TP124, Used Tetra Pak AB straw applicator 2011Technical Specifications & Performance DataThe Straw Applicator 30 is a dedicated packaging machine engineered to apply individual drinking straws onto carton packages with high accuracy and repeatability. Manufactured by Tetra Pak Packaging Solutions AB, this second hand unit is well suited for integration within beverage production and industrial packaging lines focused on carton handling. With low operating hours and CE compliance, it offers dependable performance for producers seeking to upgrade or expand a used bottling line or carton packaging operation.Manufacturer: Tetra Pak Packaging Solutions ABMachine type: Straw Applicator 30Model: 30Year of manufacture: 2011Production speed: up to 16,400 packs per hour (dependent on pack format and line speed)Container compatibility: Carton packagesSupported format: Tetra Classic Aseptic (tetrahedral)Primary function: Automated application of individual straws to preformed, filled, and wrapped cartonsOperating hours (hour meter): 1,878.6 hDrawing specification: 86335D-300CE marking: YesAdvanced Automation & Control SystemsThis machine employs a robust, PLC-based architecture with an HMI operator panel for recipe management, real-time status visualization, and streamlined diagnostics. Integrated sensors monitor straw presence and placement, while alarms and fault messages support rapid troubleshooting and reduced downtime. Quick-change parts enable efficient format adjustments, enhancing flexibility on mixed-format packaging lines.PLC-based control with HMI for set-up, recipes, and monitoringIntegrated sensors for straw presence and placement verificationAlarm and diagnostic functions for rapid fault resolutionQuick-change components for format changeoversCE-compliant guarding and interlocksProduction Line Integration CapabilitiesDesigned for inline operation, the Straw Applicator 30 synchronizes with upstream carton fillers and conveyors, as well as downstream bundling or case packing systems. Its control interfaces facilitate signal exchange for smooth product flow and coordinated speed control across the industrial packaging line.Inline integration with carton fillers and conveyor systemsInterface-ready for upstream/downstream signal exchangeFormat change flexibility for multiple carton sizes and straw typesSuitable for beverage production environments focused on carton packagingMachine Condition & Maintenance HistoryThis second hand unit presents as a low-hour machine with a clear operational profile. The hour meter indicates limited use, supporting extended service potential. Maintenance should follow OEM guidelines to sustain reliability and performance in continuous-duty applications common to beverage and industrial packaging operations.Operational status: Ready for operationLow operating hou... Psdpfx Amez E Dk Sexsrb

Condition: good (used), Year of construction: 2005, pressure 150 t chamfer lenght 3100 mm distance between columns 2600 mm throat 250 mm dayligth 325 mm piston stroke 120 mm table height 875 mm ajustment speed 70.0 mm/sec working feed 9.0 mm/sec return speed 60.0 mm/sec pressure 220 bar Control ATL 550 total power requirement ca. 15.0 kW weight 8400 kg range L-W-H 3500 x 1700 x 2240 mm from a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinenvideo - ?v=Vk6FOVp0cVo Specifications: - Simple NC electro-hydraulic press brake * With torsion shaft - ATLANTIC NC control system ATL 550 * Backgauge positioning (X) * Depth adjustment positioning (Y1, Y2) * Ability to program various programs * Memory capacity: max. 200 programs - max. 400 blocks * Swiveling control panel, front left - NC electro-motorized backgauge (X-axis) Prjdpfxoz Hd R Us Amxsb * 2 manually adjustable stop fingers - 1 split set of Rehfuß-upper dies * Includes AMADA/PROMECAM tool adapter - 1 split set of reversible 4-V dies * V-openings: 16/22/35/50 mm - 1 freely movable foot control - Safety guard on the side behind the machine - Operation manual and wiring diagram

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Prsdpfxjk Aa Ukj Amxob Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Prsdortrzajpfx Amxeb Equipped with: Retriever Shuttle Table Chip Conveyor Auto Load Grayco Lube AB Panelview Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Condition: good (used), Year of construction: 2006, functionality: fully functional, punching force: 30 t, total height: 1,900 mm, working range: 10,000 mm, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,400 kg, throat depth: 1,250 mm, compressed air connection: 6 bar, space requirement width: 4,000 mm, space requirement length: 3,200 mm, space requirement height: 1,900 mm, input voltage: 400 V, Euromac ZX INdex 1250/2000/30 *Includes Multitool 6 Pedpfxoz Dutue Amxjrb *Includes various tooling Year of manufacture: 2006 Punching force: 30 tons Working area: 1250 x 2000 X-axis movement: 2000 mm with extension up to 10,000 mm Y-axis movement: 1250 mm X-axis speed: 50 m/min Y-axis speed: 50 m/min Stroke: 30 mm Max. stroke frequency (in steps of 1 mm, 1 mm sheet thickness): 730 1/min Max. stroke frequency (in steps of 25 mm, 1 mm sheet thickness): 300 1/min Table height: 980 mm Motor power: 5.5 kW Oil tank: 115 l Length: 4000 mm Width: 3200 mm Height: 1900 mm Transport dimensions: 4000 x 2300 x 1900 mm Weight: 6400 kg Includes 6-position multitool holder 2 clamping jaws with automatic repositioning Table with brushes Automatic repositioning up to 10,000 mm Max. punching diameter with single tool: 88.9 mm Max. punching diameter multitool holder MTE6: diameter 24 mm Max. opening of the clamping jaws: 7 mm Transport width: 2350 mm Operating manual in English and Italian CE declaration available

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, clamping force: 150 kN, screw diameter: 18 mm, clearance between the columns: 220 mm, total length: 2,100 mm, total width: 800 mm, overall weight: 1,550 kg, Clamping force: 15t Year of manufacture: 2001 Injection unit 30 Screw diameter: 18 mm Pump motor power: 5.5 kW Cylinder heating band power: 3.9 kW Tool clamping unit 150 Clamping force: 15 t Distance between columns: 220 x 220 mm Predpfx Aez Egkuomxsb Weight: 1550 kg Footprint: approx. 2100 x 800 mm Control system: Selogica ARBURG Allrounder 220 S 150-30, year of manufacture 2001 Equipment / condition: - Selogica control system with CF card reader - Clamping force 150 kN, injection unit 30, 18 mm screw (screw/cylinder inspected) - Very compact machine, footprint approx. 2.1 x 0.8 m – ideal for small parts - From a tool shop (trial molds and pre-production runs), little used in recent years - No peripherals (dryer and hopper available upon request)

Condition: new, Press brake tool/upper punch for Bystronic press brake Prsdpoiim Dwofx Amxeb P5 RFA Style 30 degree H250mm R1.0mm Flexible length of L500mm, L508mm L515mm, L550mm in segment

Condition: new, Press brake tool/upper punch for Bystronic press brake P7 RFA Style 30 degree H250mm R3.0mm Pedpfx Aekuz E Remxerb Flexible length of L500mm, L508mm L515mm, L550mm in segment