Used Comacchio 901Gt And Equipment for sale (46,980)

Condition: good (used), functionality: fully functional, fuel type: diesel, overall weight: 22,000 kg, Year of construction: 2016, Servicing is performed every 500 hours (all oils and gearboxes). 4.6t Nm torque 30t pulling force Additional equipment: Generator Circulation pump for water-based drilling mud Crane Iisdpfx Aez A Tkioqcog We added: compressor XRHS 366 Atlas Copco (2006, 8181 hours) and all drilling pipes: 150m of 152mm pipes and 150m of 88.9mm drill pipes.

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. Ijdpeq Nxrxefx Aqcoig 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Year of construction: 2020, condition: new, Layout: Lifting mast Attachment suited for: Lifting equipment Selling price: € 1.850, US$ 1.960 Iiodpfsphq Dzex Aqceg Material Handling Arm for loaders (First picture is for Volvo L35) Load carrying capacity: 2 tons

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Iijdoxd D Nzspfx Aqcsg

Year of construction: 2014, condition: used, Power: 165 kW (225 HP) Number of cylinders: 6 Empty weight: 26.400 kg Dimensions (LxBxH): 900 x 255 x 300 cm Track width: 5 cm Serial number: 2299 Designed for heavy-duty foundation work, anchors, and geotechnical applications Hour meter reading: 2684H Ijdpfx Aqoz Df R Dscoig Equipped with wireless and wired remote controls Dual drill head Drill motor brand: Eurodrill Drill motor 1 type: RH4300 Year of manufacture: 2014 Drill motor 2, for hammer rods, type: HD5012 Year of manufacture: 2014 Drilling flushing water: 3’’ water hose External engine RPM display on the front left Rubber-coated tracks Track width: 500 mm Dual automatic lubrication Hydraulic outriggers Engine: Deutz Engine power: 225 kW Number of cylinders: 6 Operating weight: 26,400 kg Includes: 100 unused pipe clamps Overall dimensions: 9,000 x 2,550 x 3,000 mm Remarks: signs of use, Online auction of drilling, foundation and heavy construction equipment, including a 2014 COMACCHIO MC28 HT multifunctional ground drilling rig, 1992 KLEM KR806D horizontal drilling machine, 1977 AMERICAN HOIST 9299 dragline, NOBAS UB35S and NOBAS UBI254 draglines, and a 2001 LIEBHERR A310B wheeled excavator. The machines originate from a foundation and marine construction environment and are suitable for contractors, drilling and piling companies, crane and dragline specialists, exporters, resellers and buyers of heavy construction machinery. The online auction opens Thursday 17 September and closes Tuesday 6 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 2 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, power: 161.81 kW (220.00 HP), fuel type: diesel, Year of construction: 2024, For Sale: High-Performance NEW BUILD Dredger Iodpfxou Afi Ie Aqcjig Perfect for Dredging in Marinas, Harbours, Sand & Gravel Mining Are you looking for a reliable floating dredger to meet your dredging needs? This high-efficiency with low cost suction dredger is ideal for a wide range of applications, including marinas, harbours, and mining operations. Key Features: Powerful Suction System: Ideal for dredging sand, gravel, slurry, and more. Versatile Applications: Perfect for clearing harbours, marinas, and inland waterways. Durable Construction: Built for long-term use in harsh marine environments. Efficient Operation: Maximize productivity in mining and excavation projects. Specifications: Dredging depth: 10 mtr (can be customized to 15 mtr dredging depth) Pump capacity: 450m3/h Engine power: 220hp Suction pipe diameter: DN200 Whether you're managing a marina, expanding a harbour, or working on a sand and gravel mining project, this suction dredger provides the performance and reliability you need. We design and build new dredging equipment, and we also have used dredgers on stock. Contact us today for pricing and more details!

Condition: used, Year of construction: 2019, Vaupel Air Tower, manufactured by Gram Filter line with fan Type/Model: FL 52 / VE 5500 / W3 Condition: Used Year of manufacture: 2019 Technical data Number of filter cartridges: 4 Number of solenoid valves: 4 Iodpfezhvvbjx Aqcsig G102 filter area: 52 m² G105 filter area: 84 m² Compressed air: 30 l/min Dust container: 35 l Weight: 630 kg Dimensions L x W x H: 1400 mm x 1200 mm x 2490 mm

Condition: good (used), Machinery from honey processing factory. DC Norris hotrooms, DC Norris settling tanks, DC Norris holding tanks, crystallised tanks, super seed tanks, pump, filter sets, various filling lines to fill squeezy bottles, glass jars and plastic buckets. Iiodepcibmopfx Aqcsg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, GEARLESS FLEXOGRAPHIC PRINTING PRESS KOENIG & BAUER FLEXOTECNICA EVO XDN8 Flexographic printing press with a central cylinder Gearless 8 colors Maximum printing width: 1000 mm Maximum material width: 1050 mm Minimum/maximum print repeat: 330/750 mm Fully automatic turret unwinder and rewinder Maximum coil diameter: 1000 mm Gas drying system BST 100% camera system Viscometers FIFE web guide Year 2019 Isdpfx Ajzx Tuioqcjig

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, The best onion peeler in the world, the most expensive but the hardest, the most simplest ! Fully services, we can offer full support for our clients, machine been fully refusrbishment and ready to work. Capacity of peeled product depending of onion size: Pjtx Eswb Uuxodn Dorc 50-70 mm +-250 kg/h 60-80 mm +-450 kg/h Iijdoxta U Eepfx Aqcog 70-90 mm +-750 kg/h 90mm+ +- 1000 kg /h Machine is fully stainless steel ! Very little used after full service ready to work, we help you with technical support and with spare parts ! Machine require air screw compressor min 2700 l/m 5-8 bar We can help configurate your factory!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Date of manufacture - 2021. Capacity - 2000 litres. Iedpfx Aowl H Nieqcjig Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: good (used), functionality: fully functional, Fuchs Terex MHL430 machine for sale. The machine is from 2002. Liebherr 924 Litronic machine for sale. The equipment is from 2007 Ijdpfx Aspq R Sxjqcoig

Condition: good (used), machine/vehicle number: 110283-110155, Year of construction: 2012, AUTOMATIC LINEAR HANDLE APPLICATOR MACHINE MANUFACTURER AND&OR MODEL 50SIA3000R&P2 Iedpfxjquuv Is Aqcjig SERIAL 110283-110155 YEAR 03/2012 CAPACITY 3000 Bph Included: * Bunker for handles & tranportation convejor * Handle side rejection system OMRON ALSO FOR SALE : TRINE T4400 Labelling machine €17,800 with HOT MELT glue. S/N: 032M44045 Labelling speeds: 60 to 350 cpm USED Wrap around labeller used for PET bottles. Used with 0.33 / 0.5L / 1.5L Volume

Condition: used, JONES SHIPMAN 1307 EIT CYLINDRICAL GRINDING MACHINE MAKE JONES AND SHIPMAN, MADE IN ENGLAND MODEL 1307 EIT CENTRE HEIGHT 185.0 mm MAX DIAMETER 370.0 mm MAX GRINDING LENGTH 1016.0 mm MAX GRINDING WHEEL 350.0 mm x 40.0 mm GRINDING SPEED 40 – 320 RPM TABLE ROTATION 16 DEGREE TO – 12 DEGREE MAX INTENAL SPINDLE SPEED 24,000 RPM PLUS VARIABLE SPEED WORK HEAD INTERNAL SPINDLE. DOUBLE SWIVEL WHEEL HEAD. METRIC DIALS RANGE OF MAGNETIC CHUCKS PENDANT CONTROL Iisdpfxsy Hi Epo Aqcsg HYDRAULIC PACK PAPER FILTRATION SYSTEM REBUILT BY ANDMAR EXTENSIVE RAGE OF TOOLING AND ACCESSORIES HYDRAULIC PACK

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine Iiedpozut Axjfx Aqcjg It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Isdpsnxi R Usfx Aqcjig Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Iijdsnxi Uuopfx Aqceg Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Ijdpfx Aezuz H Sjqcsig Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: excellent (used), Year of construction: 2004, Description ELECTRIC SWITCH AND PLUGS PRODUCTION WITH KNOW HOW Selling complete socket and switch production with KNOW HOW Production include: 1.1- PLASTIC INJECTION MACHINES 2X 1. 51 of moulds for plastic parts, two diferent design of switch type programs, ALL MOLDS ARE IN PERFECT CONDITION. 2. 22 of stamping tools for steel parts underconstruction of bottom underconstruction switches and plugs 3. 40 of machines for assembly line with tables pneumatic screv drivers delivery vibration machines for screews and other parts 4. Row half product aprox 100.000 parts on stock to assemblle 5. Stamped metal products parts - over 100000 on stock 5. Packed finished stock of aprox. 3500 switches ready to sell in different types and models. 6. testing equimpent for quality for switches. 7. Complete production information,documentation, drawings with buyers list , price lists, calculations etc. Ijdpfx Aovk Unloqcoig 8. Showroom glass panels with promotional complete types of switches. 9. Lot of other accessories and equipment -look attached photos many more equipment not on photos of machineenseeker only 15 photos limit. Company had ISO 9001 AND IT WAS CERTIFICED FOR ELECTRIC SWITCH PRODUCTION ACCORDING TO EU - GERMAN STANDARDS. To start up need space area from 300 to 400 square meters of production space FOR TRANSPORT WILL BE NEEDED 3 BIG TRUCKS TRAILERS.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Description WE OFFER AN HIGH TECH CNC LATHE TURNING AND MILLING CENTRE MACHINE IS COME OUT FROM FORMULA 1 - MERCEDES WORKSHOP MACHINE WAS FROM NEW HIGEST POSSIBLLE MAINTAINED WITH OFFICAL MORI SEIKI TECHNICAL DATA: Mori Seiki MT2000 CNC Lathe Description: Swing over bed - 700mm, Distance between centres - 1080mm, Max turning dia meter - 550mm, Max turning length - 1020mm, Bar capacity - 65mm, X Travel - 565mm, Y Travel - +/-80mm, Z Travel - 1077mm, B Indexing - +/-120deg, X Travel Turret 2 - 155mm, Z Travel Turret 2 - 1067mm, Spindle Speed - 4500rpm, Spindle nose - JIS A2-6, Tool Spindle Speed - 6000rpm, Tool Spindle type - Capto C6, ATC - 40 Tools, Max tool length - 280mm, Max tool weight - 7kg, Turret 2 Tools - 12, Square shank - 25mm, Iisdpfjzcz Dbox Aqcjg Boring bar shank diameter - 40mm, Drive tool speed - 4000rpm, Tailstock diameter - 110mm, Tailstock spindle travel - 150mm, Taper of Tailstock - MT5 Transport information Width: 3800mm Depth: 2100mm Height: 2565mm Weight: 12000kg FOR CLIENT WE CAN ORGANIZE TRANSPORT WORLDWIDE

Condition: excellent (used), 4 column truck / bus lift WITH INTEGRATED LIGHTS Lift is already dismantled, ready to load on truck. We can organize it transport inside EU. We can organize it 4-column: yes width between the columns 335cm length lanes 800cm Specifications Manufacturer KONI Model 14000KG Condition Used Stock Number 0066 Brand Koni Iodovkpi Rjpfx Aqcoig Capacity 14000 kg Lifting height 16350 mm Path width 700 mm electric Connection 400 V Total dimension l 8000 mm Total dimension w 4000 mm Total dimension h 2400 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, WE OFFER AN VERY NICE CONDITION INDEX WITH FULL EQUIPMENT AND TOOLINGS. MACHINE IS IN FULLY WORKING CONDITION. WE OFFER AN NICE CONDITION INDEX WITH Control FANUC 21i-TA DRIVEN TOOLS AND EQUIPMENT Iedpfxjvkx Nys Aqcjig Max. turning diameter 310 mm max. turning length 1,470 mm Hollow clamping cylinder diameter 80 mm HOLE TROUGH SPINDEL 95mm Rapid traverse 12 m/min Tool positions 16-way turret / 4 driven C-axis division 1-locking bolt 2.5 degrees 2-locking bolt 0.5 degrees Speed range level 1: 20-2000 rpm level 2: 40-4000 rpm Total power requirement 40 kW Machine weight approx. 6 t Dimensions 5,350 with chip conveyor x 2,000 x 2,500 mm Control FANUC 21i-TA Year of manufacture 2002 Incl. chip conveyor Incl. tailstock Incl. steady rest Incl. documentation FOR CUSTOMER WE CAN ORGANIZE AS WELL TRANSPORT TO THEIR COMPANY..WORLDWIDE DELIVERY TO LOAD MACHINE NEED 7 LOADING METERS ON TRUCK.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, WE OFFER AN NICE CONDITION SAW PEGAS AND GONDA HERKULES X-CNC 350X 400 with rollers and many new reserve blades Iodpfxovznkbs Aqcsig MACHINE WAS USING IN FURNITURE PRODUCTION FOR CUTTING METAL TUBES FOR CHAIRS AND OTHER FURNITURE WITH MACHINE INCLUDED A LOT SPARE BLADES, RAILS CONVEYOR FOR WASTE WHEN MACHINE CLEANED WILL LOOKS AS NEW. WE CAN ORGANIZE FOR CUSTMER ALSO TRANSPORT WOLDWIDE

Year of construction: 2010, condition: excellent (used), functionality: fully functional, WE SELL AN VERY NICE WORKING CONDITION WAFIOS FSE23 WAFIOS FSE 23 CNC - OFFERING Designed for the production of compression springs, the Wafios FSE 23 is offering a cost-optimized solution for manufacturing all standard types of compression springs. The reliability of the machines ensures smooth and trouble-free production, not only because any standstill time is reduced to a minimum, but also thanks to the high repeatability delivering perfect production results time after time. With easy setup and straightforward handling, tooling change and setup time is minimized and machine availability is increased to its full potential. Technical Specifications: Wire Diameter: 0,35mm –> 1,60 mm Outer Spring Diameter: up to 35,00 mm Infred Speed: up to 120 mt/min Output Rate (springs): up to 500 pcs/min Output Rate (rings): up to 750 pcs/min Iodpjymthyjfx Aqcjig

Condition: new, Year of construction: 2026, FORMA Z folding machine is the most flexible and diverse sheet metal folding machine in our portfolio. Folding both up and down, FORMA Z folding machine eliminates the need to flip material, providing time-efficient folding of complex parts using one operator. The Combi beam rotation between two tooling set ups and the unique geometry gives you unrivalled working space. The automatic tool locking is fast and has features making tool changing very ergonomical. The folding beam has automatic crowning, automatic folding center adjustment and automatic sheet thickness adjustment, which provides superior folding quality in all thicknesses and across the folding length. The large number of vacuum grippers holds the part steadily, anywhere on the back gauge. Large blanks as well as small, one as well as several. The back gauge comes in many designs, which gives you great freedom of choice in how you would like to operate the machine and manage the flow of blanks and parts to/from the machine. Last, but not least – FORMA Z is fast: more production in less time for you! Iijdpfx Asmhhn Eeqceg - CNC controlled crowning of folding beam - CNC folder that folds upward and downward, no need to flip the material. - 150 mm movement of folding beam, to move outside of material on folding side. - The Combi beam comes equipped with 203 mm (8”) High Divided Tools and straight rail. - Comes as standard with multifold tooling, CNC controlled sheet thickness and folding center adjustment. - The folding beam can be used as front gauge up to 150 mm. - Add vacuum grippers to make work lighter, more precise, and automated!