Used Compressed Air Meter Flow Meter Dn50 for sale (31,636)

Condition: good (used), IFM SD2000 Pgodpsv Rbansfx Adxor DN50 PN 16 U: 19-30V i out: 250mA

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Technical data: - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. In addition, you have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come and see the condition and operation of the system for yourself. Pgedpfx Adozlhp Uexer You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, volume flow: 124 m³/h, Exhibit: RENNER RKT + 0125 compressed air dryer with level-controlled condensate drain Year of manufacture: 2022 Volume flow: 2.08 m³/min (at 7 bar and ambient temperature of 25°C) Pressure dew point: 3°C max. pressure: 16 bar Connection thread: G 1 1/4" Dimensions: Length: 345mm Width: 525mm Height: 851mm Weight: 45kg Convenient leasing for new machines is possible through our bank. Visit our store. We always have a large selection of new and used compressors in stock! Psdpfx Adou Iwc Rjxjgr Visit our business premises in Erlangen. You will find a large number of used and new compressors on over 450 square meters of exhibition space.

Condition: good (used), Year of construction: 2013, functionality: fully functional, volume flow: 0.85 m³/h, total width: 630 mm, total length: 484 mm, total height: 779 mm, overall weight: 80 kg, pressure dew point: 3 °C, input voltage: 230 V, ambient temperature (max.): 43 °C, ambient temperature (min.): 3 °C, type of cooling: air, power: 0.29 kW (0.39 HP), input frequency: 50 Hz, Equipment: type plate available, KAESER Refrigeration Dryer SECOTEC TA 8 – Year of Manufacture 2013 – Recently Serviced For sale is a reliable refrigeration dryer TA 8, ideal for compressed air treatment in workshops or industrial settings. The dryer was manufactured in 2013 and has recently undergone a complete service by a KAESER partner – technically flawless and immediately ready for operation. Technical Data: Pgjdpfx Adsy H Amyexsr * Volume flow: 0.85 m³/min * Pressure dew point: +3 °C * Operating pressure range: 3 – 16 bar * Pressure drop: 0.14 bar * Refrigerant: R134a * Connection: G 3/4 * Power supply: 230 V / 1 phase / 50 Hz * Ambient temperature: +3 °C to +43 °C * Dimensions (W x D x H): 630 x 484 x 779 mm * Weight: approx. 80 kg Energy consumption: * 0.27 kW at 100% load * 0.15 kW at 50% load * 0.04 kW at 10% load Condition: Used, well-maintained, fully operational – in very good condition thanks to recent servicing. The price includes VAT, and VAT is itemised. Inspection by appointment possible. If interested, please get in touch!

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 2 h, functionality: fully functional, volume flow: 1,680 m³/h, total width: 1,000 mm, total length: 790 mm, total height: 1,590 mm, overall weight: 262 kg, Exhibit: Renner DV 1650 AB compressed air refrigeration dryer (Made by Donaldson Ultrafilter) with hot gas bypass control with electronic level-controlled condensate drain Year of manufacture: 2023 The electronic control unit including display shows the current pressure dew point, operating hours, as well as service and alarm messages and offers numerous options for individual adjustment Technical specifications: Flow rate: 28.00 m³/min Power consumption: 3.10 kW Pressure drop: 0.16 bar Psdpfx Aeqv Egijdxjgr Connection: DN 80 PN 16 Connection condensate: 1/2" Electrical supply: 3 Ph/400V/50Hz Dimensions L x W x H: 79 x 100 x 159 cm Weight: 262 kg Visit our premises in Erlangen. You will find over 450 square meters of exhibition space a large number of used and new compressors.

Condition: excellent (used), Year of construction: 1998, Ultrafilter Laserpac LP ​​0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) This unit was specifically developed for applications requiring ultra-high-purity compressed air—ideal for operating laser cutting systems, as well as for use in the pharmaceutical, food, and electronics manufacturing industries. Using a 5-stage process, the system not only removes moisture but also highly efficiently purifies the compressed air of oil vapors, particles, and carbon dioxide (CO₂). Technical specifications at a glance: Pgodpfx Ajzwl Hzedxer - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ purification: Inlet max. 1000 ppm → Outlet max. 100 ppm - Vessel test pressure: 20.8 bar - Year of manufacture: 1998 Dimensions: (H x W x D) 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 3342-01-2815, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 230 V, input frequency: 50 Hz, Compressed air dryer Manufacturer: FarragTech Pgsdpfxezaum Do Adxsr Type: CARD 110 S Year of manufacture: 2015 Power: 3.4 kW Two material handling devices Manufacturer: ICEVA Type: GS-4mD Year of manufacture: 2015 Power: 1200 W System in perfect condition, like new!!! PRICE REDUCED FROM 3550 TO 3250 EUR!

Condition: excellent (used), Year of construction: 2002, Ultrafilter LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) This unit was specifically designed for applications requiring ultra-high-purity compressed air—ideal for operating laser cutting systems, as well as for use in the pharmaceutical, food, and electronics manufacturing industries. Using a 5-stage process, the system not only removes moisture but also highly efficiently purifies the compressed air of oil vapors, particles, and carbon dioxide (CO₂). Technical specifications at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ purification: Inlet max. 1000 ppm → Outlet max. 100 ppm - Vessel test pressure: 20.8 bar Pgodpfx Adezwmacsxor - Year of manufacture: 2002 Dimensions: (H x W x D) 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: as good as new (ex-display), Year of construction: 2024, new compressed air refrigerant dryer KAESER TB19 with low-energy SECOTEC control. with electronically controlled steam trap The dryer is immediatly available Year of construction: 2024 Techn.Daten: Flow rate: 2.10 m³ / min Pressure dew point: 3 ° C Overpressure: 3 to 16 bar Pedpfod S S T Djx Adxogr Ambient temperature: + 3 ° C to + 43 ° C Max. Compressed air inlet temperature: + 55 ° C Connection compressed air: G 1 " Dimension (W x D x H): 620 x 540 x 963 mm Weight: 108 kg electrical supply: 230 V / 1/50 Hz Visit our business premises in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: excellent (used), Year of construction: 2004, Ultrafilter LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from premium manufacturer Ultrafilter (Donaldson) Pgjdpfx Adjzwl Rgexer This unit was specifically developed for applications requiring ultra-high-purity compressed air—ideal for operating laser cutting systems, as well as for use in the pharmaceutical, food processing, and electronics manufacturing industries. Using a 5-stage process, the system not only removes moisture but also highly efficiently purifies the compressed air of oil vapors, particles, and carbon dioxide (CO₂). Technical specifications at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ purification: Inlet max. 1000 ppm → Outlet max. 100 ppm - Vessel test pressure: 20.8 bar - Year of manufacture: 2004 Dimensions: (H x W x D) 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2021, Kaeser Secotec TE 142 Refrigeration Dryer YOM 2021 Serial number: 149-8393351 16 Bar Pedpfoyy U I Njx Adxsgr 3-60 degrees C Refrigerant R513A Flow rate: 14.50 m3/min - 14500 l/min Total width: 712 mm Total length: 982 mm Total height: 1,612 mm Overall weight: 249 kg Kaeser compressed air dryers ensure dry, optimal compressed air for all flow rates. Built as high-quality industrial machines, they reliably protect your system and processes from condensation damage, even under extreme conditions.

Condition: good (used), Hose reel, hose unwinder, tank hose reel, wall-mounted reel, oil conveyor, hose reel, automatic hose reel, oil hose reel, grease hose reel, grease hose reel, compressed air hose reel -Hose reel: Double hose reel oil-compressed air -Oil hose reel: length 6.65 m with flow meter Psdpfjwbpxljx Adxjgr -Compressed air: hose length 10.57 m -Dimensions: 800/500/H550 mm -Weight: 76 kg

Condition: used, Year of construction: 2014, Product Information "ALMIG Pressure Vessel" Pressure Vessel ALMIG Type / Model MB 030603-1.500 according to DGRL97/23/EC - AD 2000 Condition Used Technical Data Volume 500 l Permissible operating pressure 11 bar T max. 50 °C T min. -10 °C Pgjdpfx Aozwpcgedxor Inquiry item: Transportation costs upon request.

Condition: ready for operation (used), Year of construction: 1995, Used compressed air refrigeration dryer. Before being decommissioned, the refrigeration dryer was checked for functionality by a refrigeration technician. Subsequently, 18 kg of R22 refrigerant (2 bottles) were extracted and disposed of. All records are available. Afterward, a small amount of nitrogen was added. We can gladly have the dryer refilled with new refrigerant (e.g., R407C) for you. !! The selling price does not include refrigerant !! Manufacturer: Sabroe Model: SV 1010 AB Type: 50 A Max. flow rate: 55 m³/min (3340 m³/h) Pressure drop at max. flow rate: 0.38 bar Refrigerant weight: 18 kg (currently without refrigerant) Max. pressure, refrigerant side: 16/25 bar Air connection: DN 100 Condensate drain: Beko 2x 3/4 inch Max. pressure, compressed air side: 16 bar Max. flow rate Pgsdpfxefy Trhj Adxsr Max. temperature: Compressed air: 60°C Power consumption with fans: 7.1 kW Voltage: 400 volts Dimensions (width/depth/height): 1880 mm / 1100 mm / 2000 mm Weight: 835 kg

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas Psdpozvcknofx Adxjgr • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: 1981, new compressed air refrigerant dryer KAESER TB26 with low-energy SECOTEC control. with electronically controlled steam trap The dryer is immediatly available Year of construction: 2022 Techn.Daten: Pgodpjix Alisfx Adxsr Flow rate: 2.55 m³ / min Pressure dew point: 3 ° C Overpressure: 3 to 16 bar Ambient temperature: + 3 ° C to + 43 ° C Max. Compressed air inlet temperature: + 55 ° C Connection compressed air: G 1 " Dimension (W x D x H): 620 x 540 x 963 mm Weight: 116 kg electrical supply: 230 V / 1/50 Hz Visit our business premises in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: excellent (used), Year of construction: 2016, KAESER Energy-Saving Refrigerant Air Dryer, Model TB 26 SECOTEC Volume flow: 2.55 m³/min | Pressure dew point: 3 °C | Refrigerant: R-513A Volume flow (m³/min) 2.55 Pressure dew point (°C) 3 Pressure drop (bar) 0.20 Electrical power consumption at 100% volume flow (kW) 0.62 Electrical power consumption at 50% volume flow (kW) 0.34 Electrical power consumption at 10% volume flow (kW) 0.1 Min. overpressure (bar) 3 Max. overpressure (bar) 16 Min. ambient temperature (°C) 3 Max. ambient temperature (°C) 43 Max. inlet temperature, compressed air (°C) 55 Width (mm) 620 Depth (mm) 540 Height (mm) 963 Weight (kg) 116 Compressed air connection G 1 Condensate drain connection G 1/4" Electrical supply 230 V / 1 phase / 50 Hz Refrigerant R-513A Pedpszrhizofx Adxogr Refrigerant charge (kg) 0.53 CO2 equivalent (t) 0.33 Global warming potential (GWP) 631 Energy-saving control Refrigerant storage Location: available from warehouse 54634 Bitburg - immediately available -

Condition: good (used), Hose reel, hose unwinder, tank hose reel, wall-mounted reel, oil conveyor, hose reel, automatic hose reel, oil hose reel, oil filling station, compressed air pump for fresh oil, remote oil equipment, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, oil centrifugal gear oil pump -Manufacturer: MWH Märkisches Werk, oil hose reel with flow meter Pgjdpfswk Hbvsx Adxer -Hose length: 7 m -Hand valve: with flow indicator -Dimensions: 550/130/H550 mm -Weight: 31 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 53 kg, pressure dew point: 3 °C, ambient temperature (max.): 43 °C, type of cooling: air, pressure (max.): 13 bar, Equipment: type plate available, Grassair DW 21 (A7) industrial refrigerated air dryer / compressed air dryer for compressor systems. The Grassair DW 21 is a compact industrial refrigerated air dryer designed for moisture removal in compressed air systems. Its purpose is to reduce the water content in compressed air produced by a compressor, helping to protect pneumatic machines, tools, valves, and pipework against condensate, corrosion, and failures. Pgsdpfx Aszc Rp Hedxjr The unit is suitable for workshops, automotive service facilities, CNC machines, paint systems, pneumatic tools, and general industrial compressed air treatment applications. Main features: Grassair DW 21 (A7) industrial refrigerated air dryer For compressed air compressor systems Compact, floor-standing design Refrigeration compressor system Condensate separation / condensate drain Designed for stable, continuous industrial operation 230 V single-phase power supply CE marked R404A refrigerant Robust and service-friendly construction Made in Italy Technical data: Manufacturer: Grassair Model: DW 21 (A7) Type: refrigerated air dryer / compressed air dryer Year of manufacture: 2011 Country of manufacture: Italy Weight: 53 kg Air flow capacity: approx. 3,600 l/min Air flow capacity: approx. 216 m³/h Maximum working pressure: 13 bar Maximum pressure: 13 bar Pressure drop: approx. 0.2 bar Pressure dew point: approx. +3 °C Maximum inlet air temperature: 55 °C Maximum ambient temperature: 43 °C Power supply: 230 V Frequency: 50 Hz Phase: 1 phase Power consumption: 1.08 kW Refrigerant type: R404A Refrigerant quantity: 0.65 kg Dimensions: approx. 750 × 470 × 740 mm Manufacturer marking: Oss, Netherlands CE marking: yes Important note: The unit contains fluorinated greenhouse gas. Installation, service, and any refrigerant-related work should be carried out by qualified personnel. The buyer should verify that the dryer capacity and connection data are suitable for their existing compressed air / compressor system before purchase. Condition: used, available for inspection and testing Location: Budapest, Hungary

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Pgjdpfx Adju T Hrvoxer Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: used, This listing is for TSI Alnor LCA501 Air Velocity Meter. The unit is in full working condition and ready for immediate use. We currently have several of these units aavailable Pgedpszau T Dsfx Adxer This high-performance handheld rotating vane anemometer precisely measures wind speed, temperature, and volume flow, making it ideal for monitoring laboratory fume hoods and HVAC systems. Transparency Report and Technical Audit: • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Pgedpfx Adjr A El Esxer Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: as good as new (ex-display), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, type of input current: AC, volume flow: 12,000 m³/h, total width: 3,000 mm, total length: 3,700 mm, total height: 3,650 mm, overall weight: 5,600 kg, operating pressure: 16 bar, pressure dew point: 2 °C, ambient temperature (max.): 45 °C, ambient temperature (min.): 2 °C, type of cooling: water, A compressed air refrigeration dryer consisting of 2 DFLO 1200 W units. The dryer has only been operated for a few hours on a test bench. Afterwards, it was repacked in its original packaging and stored in dry conditions. Volume flow rate: 12,000 m³/hour Min. / max. operating pressure: 2 - 16 bar Test bench operating pressure during last application: 1.4 to 2.3 bar Inlet diameter: 1x DN 200 Outlet diameter: 1x DN 200 The dryer features a second overpressure outlet DN 100 with Samson pressure regulator. Min. / max. compressed air temperature: +2°C to +55°C Min. / max. ambient temperature: +2°C to +45°C Cooling water requirement: 14.3 m³/h Cooling water connection: 2" Refrigerant: R407C Pedpfx Aew Dppvodxjgr Refrigerant charge: 24 kg Installed electrical power: 29 kW Power consumption: 18 kW Wooden crate dimensions: Length: 3700 mm Width: 3000 mm Height: 3650 mm Weight: 5600 kg

Year of construction: 2016, condition: excellent (used), machine/vehicle number: ALM1320400 0816004, used ALMIG dryer ALM1530 year 2016 very good condition Technical specifications: Model: ALM1320 Medium: compressed air, free from aggressive components Flow rate: 20.00 m³ / min Operating pressure: 7 barg Pgedpfx Adoix Al Roxer Pressure dew point: 3 ° C Compressed air connection: 2 1/2" Electric power supply: 400 V±10%/3/PE ; 460 V±10%/3/PE Frequency: 50/60 Hz Dimensions, weight Height: 1510mm Width: 1129 mm Length: 857 mm Weight: 314 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, Year of construction: 2013, Compressed air refrigeration dryer Model: MG 110 Year of construction: 2013 Air volume flow 6,600 m³/h or 110.0 m³/min Nominal power: 8.99 kW The air dryer is functional and was regularly serviced and checked until it was decommissioned Podpfx Asu Rn Trodxjgr