Used Compressor And Compressed Air Treatment for sale (31,992)

Condition: new, Year of construction: 2022, operating hours: 5 h, functionality: fully functional, overall weight: 290 kg, total length: 1,430 mm, total width: 660 mm, total height: 1,250 mm, fuel type: electric, volume flow: 15 m³/h, noise level: 54 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) - 2022 Model: SRKT 2 The compressor delivers oil-free air, dried to a pressure dew point of +3°C. Operating hours: 5h Overpressure: 0.8 MPa Capacity: 14.4 m³/h Dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Weight: 290 kg Tank capacity: 240 litres Ambient temperature range: +5 to +40°C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15°C above ambient temperature Refrigerant: R134A - 0.35 kg Noise level: 54 dB(A) Drive transmission: belt drive Nominal motor power: 2.2 kW Motor energy efficiency class: IE3 Codpexyhdbofx Adrerh Motor protection rating: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended supply cable cross-section: 5x1.5 mm² Protection: A16 Dryer pressure dew point: +3°C Compressed air purity class according to ISO 8573.1: 1.4.1 Microprocessor controller: MS-286 Airpol Power Control

Condition: used, This listing is for a Jun-Air 6-J mini Air Compressor Crjdpoxzg Saofx Adreh Used Jun-Air 6-J mini air compressor providing quiet, oil-free compressed air for laboratory instruments and analytical equipment.

Condition: used, Year of construction: 2008, Air consumption 42,83 m³/min Motor output 250 kW Overall size 4000 x 2100 x 2500 mm Crjdpfx Aevx Uvlsdroh 0 min. 4 bar 0 max. 13,5 bar Weight 20.000 kg Dimensions (LxWxH) 13,00 x 2,95 x 2,90 m The pneumatic container is used to provide oil-free dry Compressed air (42 m³/min max. 7.5 bar) for test facilities and consists of a self-contained container functional unit, in which the following Machines, as shown schematically in Figure 2, were integrated: - Compressor EKO 250 D - Refrigeration dryer HHDp 4500/HF 5-M/5 - Activated carbon adsorber BEKO Clearpoint L 3400 V - Post-filter HF 6-60 - Oil-water separator BEKO Öwamat 16 - El. Steam trap BEKO 14

Condition: used, This listing is for a Jun-Air OF302 Application Oil-free compressor 25 liter pressure vessel mounted on frames incl. 5 micron filter regulator with auto-emptied water several withdrawal options for compressed air adjustable rubber mounts flexible applications can also be used for retrofitting existing systems horizontal mounting manner possible ideal for installation in OEM applications 2-frequency driving motor Technical Data Suction - 108 l / min Delivery performance - 38 l / min at 8 bar Volume - 65 dB (A) Cylinder per compressor - 2 Pressure container volume - 25 l Permissible ambient temperature - + 1 ° C to + 40 ° C Supply voltage - 230 V, 50 Hz Engine Power - 0.44 kW Current consumption - 4.1A Csdexzg Rvjpfx Adrsrh Thermal protection - Integrated Duty - 100% Weight - 28 kg Dimensions (LxWxH) - 380 x 380 x 610 mm

Condition: good (used), Year of construction: 2001, Atlas Copco SF 15 oil-free scroll compressor The SF series utilizes scroll technology, which eliminates metallic contact between the compression elements, meaning that absolutely no oil is required in the compression chamber. This makes the system ideal for applications that require completely clean and oil-free compressed air (e.g., in laboratory, medical, or food processing environments). The three installed scroll compressor elements have recently been overhauled or replaced. Operating hours (total): 15,983 hours (the actual time the compressor has been running since 2001). Controller hours: 99,527 hours (the time the controller was energized). Operating times of the individual scroll elements (compressor stages): Operating hours, element 1: 735 hours Operating hours, element 2: 735 hours Operating hours, element 3: 736 hours Technical data: Manufacturer: Atlas Copco Model / Product type: SF 15 (Oil Free Air) Serial number: ATI 502157 Maximum operating pressure: 8 bar(e) Delivery rate (Free Air Delivery): 24.7 l/s Shaft rated power: 14.8 kW Shaft rated speed: 1500 rpm Total weight: 590 kg Year of construction: 2001 Controller: Elektronikon (digital display) Length: 1.21 meters Width: 0.96 meters Height: 1.66 meters "Everything from a single source: We would be happy to offer you suitable bank financing for your project." Cjdpfx Adezwmd Usrorh More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2009, operating hours: 4,824 h, functionality: fully functional, power: 5.52 kW (7.51 HP), 1 x Atlas Copco Airpower B.V. rotary screw compressor and refrigerant air dryer mounted on 200L receiver tank. Crsdpszu Aw Sofx Adrjh Manufacturer - Atlas Copco Airpower B.V. Model - GX5 FF. Serial number - CAI361147. Date of manufacture - 2009. Working pressure - 10 bar. Working hours - 4824 hours. Electrical requirements: Compressor - 400 V / 50 hz / 3 phase. Air dryer - 230 V / 50 hz / 1 phase.

Condition: good (used), Motor output 1 kW Max. pressure 16 bar Crodpfx Ajvwgn Redrjh

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 Cjdpsxc T Evefx Adrjrh o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Auction of two Kaeser screw compressors, one Kaeser refrigeration dryer, and one compressed air tank! Screw compressor Kaeser SK 22 Year of manufacture: 2020 Screw compressor Kaeser SK 19 Year of manufacture: 1995 Refrigeration dryer Kaeser TB 26 Year of manufacture: 2016 Compressed air tank Crodpfx Adezktnysrsh Volume: 500 l Year of manufacture: 1986

Condition: new, Year of construction: 2026, LUFT 1000 COMPACT Screw Compressor with Integrated Refrigeration Air Dryer The LUFT series screw compressor from the Polish brand CORMAK represents the latest advancements in pneumatic technology, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features: Innovative Design Our compressors are built on advanced engineering and European manufacturing precision. The solid construction, enhanced with modern components, ensures long-lasting and reliable operation in all working conditions. Integrated Refrigeration Dryer The COMPACT version with an integrated dryer offers space-saving and comprehensive functionality in a single unit. The built-in refrigeration dryer ensures clean and dry air, protecting your system from corrosion and damage. Quiet Operation & Comfort Designed with attention to detail, our compressors operate with exceptionally low noise levels. Effective soundproofing and vibration reduction systems provide a comfortable working environment, enhancing operator focus and well-being. Smart Control System The intuitive MAM electronic control panel acts as the command center of your compressor. It allows precise monitoring of parameters, scheduling of maintenance, and quick diagnostics, ensuring system stability and protecting key components. Tailored to Your Needs We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems to perfectly match the specific requirements of your industry. Dynamic Operating Pressure Automatic pressure adjustment ensures that the compressor delivers exactly the amount of compressed air needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable Development Codoxmg A Aspfx Adrsrh We prioritize environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your energy bills but also minimize environmental impact. The heat recovery option allows for maximum energy utilization. Integrated Refrigeration Dryer – Top-Level Air Quality Two-Stage Drying System: Provides effective moisture removal and protection for your pneumatic system. Variable-Speed Fan: Automatically adjusts cooling performance to match working conditions, optimizing energy consumption. Dual Filtration System: Includes a pre-filter with 3.0 µm precision for removing larger solid contaminants, and a fine filter with 0.1 µm precision that captures oil aerosols and other fine particles, ensuring the highest level of air purity. Technical Specifications Parameter Value Motor Power 7.5 kW Voltage 400V / 50Hz Air Delivery (0–6 bar) 990 L/min Air Delivery at 6 bar 950 L/min Air Delivery at 8 bar 950 L/min Air Delivery at 10 bar 930 L/min Outlet Connection Diameter (G) 3/4" Dimensions (L x W x H) 1320 x 650 x 945 mm Weight 320 kg

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Codpfxjzmub To Adrsrh

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Credpfjzlhp Uox Adrsh Technical data: - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. In addition, you have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come and see the condition and operation of the system for yourself. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. Credpfxozcaufj Adreh - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: used, We have two compressor Jun-Air Model 6 mobile units available. Specs you can see on the pictures Codpfxszwk S As Adrjrh

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, COMPLETE PACKAGE: Mobile, transportable compressed air supply station – the entire system is installed in a red steel container (10 ft) and can be transported as a single unit using a crane. Simply connect the three-phase power supply and compressed air line – and it’s ready to go. The interior features a HIGH-QUALITY INDUSTRIAL SYSTEM manufactured in 2025: - SCC screw compressor with frequency inverter (speed-controlled, energy-efficient) - 2000-liter pressure vessel VIG (stands upright, protrudes through the container roof with a weather protection cover) - Complete control system with touch panel and emergency stop button on the outside - Acoustic sound insulation (black foam mats inside) - Permanently installed electric heater in the container (frost protection for year-round operation) - Hose material and compressed air connections for consumers - Crane lifting points on the container roof - Control panel with touch display, emergency stop, status LEDs Originally from the shipyard operations of Strela Shiprepair GmbH. System freshly painted, clean, and ready for use. Assumption of the maintenance contract with Schulze is possible. TECHNICAL DATA: SCREW COMPRESSOR: - Manufacturer: SCC Air Compressors - Control: SCC frequency inverter (speed-controlled) - Type: Screw compressor, stationary in the container - Year of manufacture: 2025, commissioning date: 23.05.2025 - Operating time: approx. 1 year in shipyard operations PRESSURE VESSEL: - Manufacturer: VIG GmbH, Kreuztal - Volume: 2,000 liters - Max. pressure: 11 bar - Test pressure: 15.73 bar - Temperature: -10°C to +50°C - Standard: AD 2000, test mark 1003 - Factory No.: 124585, year of manufacture 2025 CONTAINER: - 10-foot steel container, soundproofed, painted red - External dimensions: approx. 2,991 x 2,438 x 2,591 mm - Crane lifting points on the roof (photo attached showing the shipyard crane) - Three-phase power connection 400 V CEE IDEAL FOR: - Shipyards and shipbuilding companies (mobile compressed air supply for ships) - Sandblasting service providers (mobile complete solution) - Industrial companies with changing locations - Automotive/body shops with an external location - Construction companies, scaffolding companies PICKUP: Loading with the shipyard crane directly on-site (container has lifting points on the roof). Transport by low-bed trailer via a forwarding agency. Inspection appointments are available at any time – we will then show you the complete documentation and demonstrate the system in operation. Crjdpfx Adezav Ddsrsh

Condition: used, functionality: fully functional, W-KRONEN HP10 LT500 compressed air compressor with integrated Aerotec compressed air refrigerant dryer Aerodry PRO 1000 For sale is a W-KRONEN HP10 LT500 compressed air compressor with an integrated Aerotec compressed air refrigerant dryer Aerodry PRO 1000. This high-quality complete system provides reliable and efficient compressed air supply for workshops, craft businesses, and industrial applications. The integrated refrigerant dryer effectively removes condensate from the compressed air, reducing corrosion, moisture damage, and failures of compressed air tools. The powerful 10 HP motor, with an intake capacity of 1,100 l/min and a delivery rate of approximately 950 l/min, ensures sufficient compressed air even under demanding conditions. The 500-liter compressed air tank guarantees a high reserve capacity and a constant working pressure of up to 10 bar. Crsdpfx Adez Iykyorjh Technical data • Tank volume: 500 liters • Max. operating pressure: 10 bar • Intake capacity: 1,100 l/min • Delivery rate: 950 l/min • Motor power: 7.5 kW / 10 HP • Speed: 1,200 RPM • Connection: 400 V / 50 Hz, 16 A • Integrated Aerotec refrigerant dryer Aerodry PRO 1000 • Compressed air treatment for dry and high-quality compressed air

Condition: excellent (used), ATLAS COPCO GA 110+ FF Screw Air Compressor ATLAS COPCO GA 110+ FF industrial screw air compressor, designed for the continuous and efficient production of compressed air in industrial facilities with high and constant demand. The GA series from Atlas Copco uses lubricated rotary screw technology, especially suitable for industrial applications where a reliable supply of compressed air is required for long operating periods. This unit corresponds to the FF (Full Feature) version, a configuration that integrates compressed air treatment within the unit itself, providing a compact solution for air generation and conditioning. MAIN FEATURES -Manufacturer: ATLAS COPCO -Model: GA 110+ FF -Type: Rotary screw air compressor -Configuration: Full Feature (FF) -Nominal power associated with the model: 110 kW -Continuous compressed air production -Lubricated rotary screw technology -Integrated cooling system -Air dryer integrated in the FF configuration -Condensate separation -Air filtration and treatment system -Electronic control via display / integrated controller -Monitoring of operating parameters -Complete, soundproof enclosure -Compact, packaged design -Robust construction for continuous industrial operation -Direct connection to compressed air networks -Access via panels for maintenance OPERATION Atmospheric air is drawn into the compressor and directed to the screw element, where two rotors progressively compress the air until it reaches the established working pressure. Codpfewnxziex Adrsrh Subsequently, the necessary stages of oil separation, cooling, and air conditioning are carried out. In this GA 110+ FF version, the integrated dryer reduces the humidity present in the compressed air before it is fed into the factory network, eliminating the need to install a separate dryer in many configurations. The system can supply a general compressed air network intended for: -Pneumatic actuators and cylinders -Automatic valves -Filling and packaging equipment -Process machinery -Pneumatic transport systems -Instrumentation -Air-powered cleaning equipment -Automatic production lines APPLICATIONS Especially suitable for food processing plants, beverage factories, canning factories, packaging facilities, and other industries with a significant demand for compressed air. The combination of ATLAS COPCO, screw technology, 110 kW power, and Full Feature configuration provides a centralized solution for the supply of compressed air in industrial facilities. Machine available for inspection. Additional technical information, working pressure, flow rate, operating hours, dimensions, additional photographs, or videos can be provided upon request.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, total length: 1,800 mm, total width: 800 mm, total height: 1,700 mm, Frequency-controlled 15 kW 4-in-1 screw compressor Credpfx Adov Uqlzorsh With compressed air treatment for laser applications Attached refrigeration dryer Integrated 4-way fine filter for clean, oil-free compressed air supply Working pressure -1.6 MPa (approx. 16 bar) Delivery rate 1.3 m³/min at 1.6 MPa Integrated pressure vessel approx. 330 l

Condition: used, ir Blower, Positive Displacement Blower, Aerzen GM 130 L, Used Machine Oil-free operation Crodpfx Aoz H Tzcsdrjh Applications: Wastewater treatment plants Chemical and process industry Power plants Cement and lime plants Food industry

Condition: new, Year of construction: 2026, LUFT 1500 COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT series screw compressor by the Polish brand Cormak represents the latest innovations in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Key Features of the Screw Modules in CORMAK Compressors: Modern Technology and Efficiency The screw modules ensure excellent performance and outstanding energy efficiency. Their design focuses on maximizing output while minimizing energy consumption. Precision and Control Thanks to advanced engineering solutions, the screw modules allow for precise control of the compressed air generation process. This translates into stable pressure and optimal operation of the entire pneumatic system. Durability and Reliability The screw modules used in CORMAK compressors are built for longevity. Their sturdy construction and use of high-grade materials ensure reliability even under harsh industrial conditions, minimizing downtime and the need for frequent repairs. Integrated Refrigerated Air Dryer – Top-Level Air Quality Two-Stage Drying System Effectively removes moisture and protects the pneumatic system. Variable-Speed Fan Automatically adjusts cooling capacity according to operating conditions, resulting in energy savings. Dual Filtration System A pre-filter with 3.0 µm accuracy removes larger solid contaminants. A precision filter with 0.1 µm accuracy captures fine oil particles (aerosols) and other impurities, ensuring ultra-clean air. Technical Specifications: Parameter Value Motor Power 11 kW Voltage 400V / 50Hz Output (0–6 bar) 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet Connection Diameter (G) 1" Dimensions 1550 x 740 x 1150 mm Weight 500 kg Credpfexnk Acex Adrjh Manufacturer: CORMAK

Condition: new, Year of construction: 2026, THEOR 20 INVERTER Screw Compressor with Refrigerated Air Dryer The set includes the THEOR 20 INVERTER screw compressor and the N20S refrigerated air dryer. The CORMAK THEOR series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK THEOR 20 COMPACT screw compressor with refrigerated air dryer and VSD inverter is an excellent choice. With a 15 kW motor and an impressive actual output of up to 2,100 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for sandblasting applications. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. Credpemqlqdsfx Adroh The screw compressor is equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air, protecting the compressed air system against corrosion and damage. It is also equipped with a VSD inverter, which automatically adjusts the compressor's speed according to demand, helping to reduce electricity consumption. The THEOR 20 COMPACT oil-injected screw compressor with refrigerated air dryer and VSD inverter features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 2,100 l/min ✅ Motor power: 15 kW Technical Specifications Parameter Specification Motor power 15 kW Voltage 400 V / 50 Hz Output at 0–6 bar 2,100 l/min Output at 6 bar 2,000 l/min Output at 8 bar 1,700 l/min Output at 10 bar 1,600 l/min Outlet connection diameter (G) G1" Dimensions 1550 × 740 × 1180 mm Weight 500 kg

Condition: good (used), Year of construction: 2016, 2x compressor units 10 bar, Boge, screw compressor, incl. compressed air dryer, compressed air tank with sound insulation hood – used –: Price per unit ex location (net): €4,950 (net) Manufacturer: Boge Model: C 15 LDR-350 Year of manufacture: 2016 Volume flow: 1.70 m3/min Final compression pressure: 10 bar Motor speed: 3000 rpm Motor power: 11 kW Operating hours as of 16.04.2024: 25,929 / 27,938 (currently approx. 30,000 h and 31,000 h respectively) Compressed air dryer Type: DS18-2 / 575145405 Serial number e.g.: 400392250004 Min/Max refrigerant pressure: 1.3 MPag / 2.2 MPag Min/Max air pressure: 0.1 MPag / 1.6 MPag 230V Compressed air receiver: Manufacturer: BWB 306 169 Capacity: 350 L Credpjwxw E Ujfx Adrsh Max. operating pressure: 11 bar Max. temp.: 100°C Min. temp.: -10°C Test pressure: 16.5 bar

Year of construction: 2015, operating hours: 780 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: sn:CAI858663, ALUP Sonetto 15 500 Screw Compressor for Sale – Reliable Industrial Unit – TOTAL OPERATING HOURS: 780!!! For sale: ALUP Sonetto 15 500 screw compressor in good working condition, suitable for continuous industrial use. Key technical specifications: Power: 15 kW Air receiver: 500 liters Working pressure: 8–10 bar Air delivery: approx. 1.8–2.4 m³/min Type: tank-mounted screw compressor Cooling: air-cooled Crsdpsyzhmbofx Adrjh Control: integrated electronic controller Condition: Operating hours: 780 Regularly maintained / serviced Oil and filters: replaced at last service Currently operational / available for testing This compressor delivers reliable and stable performance, ideal for workshops, industrial applications, and automotive service environments. Additional information: Location: Gyor / Hungary Transport/shipping can be arranged if needed Price: 7,700 EUR (negotiable) For further information, feel free to contact by phone or message.

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW Crsdpfx Adjinur Aorjh

Condition: excellent (used), Year of construction: 2002, Ultrafilter LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryers and CO₂ purifiers from the premium manufacturer Ultrafilter (Donaldson). This system was specifically developed for applications that require absolutely ultra-pure compressed air – ideal for operating laser cutting systems, the pharmaceutical and food industries, or electronics manufacturing. The system removes not only moisture in a 5-stage process but also cleans the compressed air extremely efficiently from oil vapors, particles, and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Voltage supply: 230 V / 50 Hz Crjdpfx Ajzwmacsdrjh - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ removal: Inlet max. 1000 ppm → Outlet max. 100 ppm - Container test overpressure: 20.8 bar - Year of manufacture: 2002 Dimensions (H x W x D): 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. More items – new and used – can be found in our shop! International shipping costs on request!