Used Cool It Isoliersysteme Gmbh Assembling Machine for sale (111,757)

Year of construction: 2017, condition: excellent (used), Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows you to choose whether the cut is triggered mechanically (e.g., on the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the processing is extremely tool-friendly. The pipes remain almost completely dry and free of coarse contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging directly integrated). Due to two separate box output stations (rear sluices with sliding doors), the system automatically switches to the second station when a box is full. The removal of the finished KLT boxes takes place in parallel with the main operating time without machine downtime. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest changeover times in non-cutting separation Material-saving and free of contaminants Chip-free Easy to maintain No cooling and lubricating agents required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs are possible Technical data & capacities Ibedszw Ukcopfx An Ijc Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimped ends) Sensors & positioning: Optical sensors for the automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feed (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths using a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard and mouse Setup operation: Mobile Siemens Teach-In terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety polycarbonate windows Logistics / output Integrated box placement station 2 separate box output stations for rear removal via protected sluice systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in excellent optical and mechanical condition.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, Rotor line Loop1 & Loop 2, location: Trnava, Slovakia. Iodpfx Aozy E I Djn Iebc We will gladly provide further technical documentation or detailed images upon request. Inspection and collection are possible by arrangement. Shipping is possible, subject to payment of costs. Subject to prior sale, errors and omissions excepted.

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, spindle speed (max.): 24,000 rpm, Gravograph IS 6000 IQ – CNC engraving machine – approx. 500 operating hours For sale is a very well-maintained Gravograph IS 6000 IQ with only approx. 500 operating hours. The machine is suitable for engraving and milling operations, for example, for the production of signs, lettering, and custom engravings. Machine data: Manufacturer: Gravograph / Gravotech Model: IS 6000 IQ Year of manufacture: 05/2016 Operating hours: approx. 500 Condition: used, very well maintained Equipment: Engraving software GS8-GRAPHIC incl. dongle Sturdy machine table with T-slots for workpiece clamping Matching base frame Wired hand control unit Extraction system on the machining head Spraying device 750 W high-frequency spindle kit for the IQ series according to the order confirmation from November 2017 The machine was purchased in December 2016. Its excellent condition and low usage with only approx. 500 operating hours are particularly noteworthy. Price: net 12,500 EUR Ibedpfxsz D Htgj An Ioc Location: 09627 Bobritzsch-Hilbersdorf Availability: immediately If you are interested, we look forward to receiving your inquiry.

Condition: used, AZO E800 screening machine, centrifugal screen Iodoz Hc Tuopfx An Isbc Completely overhauled Material: steel, coated Includes new bearings, seals for the electric motor, and rotor See our other listings.

Condition: good (used), Year of construction: 2000, Weber Assembly Table / Joining Station Heavy-duty industrial assembly table / joining station from the quality manufacturer WEBER Konstruktion Maschinenbau GmbH. This machine is characterized by an extremely robust mechanical basic structure and is ideal for production facilities, workshops, or as a perfect foundation for a modernization project. Technical data (according to the nameplate): Manufacturer: WEBER Konstruktion Maschinenbau GmbH (Aschaffenburg) Ibedpfx Aszni Rxsn Ioc Type: Assembly table Machine No.: BA 659 00 Year of manufacture: Electrical connection: 380 V (CEE plug available) Pneumatic connection: 6 bar "Everything from a single source: We will gladly offer you suitable financing for your project." You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Production line for cell stacks for 48 V hybrid vehicle batteries Aumann production line for cell stacks for 48 V batteries of the 2nd generation – manufactured in 2023, little used. Assembly – testing – installation of cell stacks into housings for hybrid vehicles. Manufactured in 2023 and little used. Some units are assembled, others are in their original delivery condition. Maximum Battery Size Size: 363 × 175 × 140 mm Maximum Capacity Standard/Performance – 8 Ah / 17.5 Ah The system consists of 7 units that are linked together. 2 images are provided for each system/unit – a separate handout is available for each. Please provide us with your offer price! Technical data can be found in the handout. Any warranty claims are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals. Ibodpfxszavwds An Ijc

Condition: good (used), Year of construction: 2020, functionality: fully functional, total length: 9,000 mm, Adhesive application cell with ABB robot IRB 4600-60/2.05. Included in the adhesive application cell: Robot (weight 425 kg, payload 60 kg, year of manufacture 2020) 7th axis + steel structure (unlike in the images, the axis and steel structure have been extended to approximately 9 m) Adhesive application units Ibsdpfjzz Agmsx An Ioc Protective fences, etc. Not included: Roller shutter doors Fixturing device (available separately) Detailed drawings available upon request.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 16274986/1, functionality: fully functional, Multiripsaw for edging boards, max cutting height 125 mm, max passage 950 mm, el.power 75 kW operating panel, conveyors Ibedpfxoz N Tfue An Iec

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ibodpfoyffqqex An Isc Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: good (used), Year of construction: 2018, operating hours: 11,000 h, functionality: fully functional, PELLE SUR CHENILLE HITACHI Ijdpjzxw H Aofx An Iebc ZX 350 LC ANNEE 2018 11000 H LARGEUR 3 M20 GRAISSAGE LIGNE BRH ATTACHE RAPIDE HYDRAULIQUE

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 340 mm turning length: - mm centre distance: 1500 mm Ibodpfx Anszu Ndls Ioc swing diameter: 500 mm centre height: 250 mm control: Heidehain Plus spindle bore: 80 mm range of revolution per miute: 20 - 2400 U/min total power requirement: 11 kW weight of the machine ca.: 0,25 t dimension machine approx.LxWxH: 3,2 x 1,7 x 1,8 m

Condition: good (used), Year of construction: 2004, EMA high-frequency welding machine with cooling water unit EMA high-frequency welding machine MFA with Thermotec PT2000 water cooling system Welding machine range: 0 - 1000 °C MF output: 80A MF generator frequency: 10 kHz Ibedpfxed Tv H De An Ioc Mains connection: 380V 106 A Foot pedal Water cooling, cooling water unit Thermotec PT2000 Dimensions approx. L1500 x W730 x H1900 mm Volume: 1730 liters Year of manufacture: 2004 The collection basin is not included in the scope of delivery. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), WEISS SWT 600/800 Spray and Splash Water Test System IPX3 IPX4 Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800 Machine Type: Spray and Splash Water Test System Operating Hours: approx. 755.9 h according to the display For sale is a used WEISS SWT 600/800 spray and splash water test system for reproducible testing of enclosures, electrical products, components, and assemblies against penetrating water. The test specimen is positioned on the rotating table in the stainless steel test chamber. A pivoting tube with several spray nozzles moves around the test specimen and subjects it to water from alternating directions. Water flow rate and test duration can be adjusted and monitored via the integrated control system. Technical Data: Test medium: Water Test system: Pivoting tube / Rotating table Ingress Protection (IP) tests: IPX3 / IPX4 according to DIN EN 60529 Pivoting angle: adjustable Pivoting speed: approx. 60°/s according to series documentation Test specimen table: rotatable / height-adjustable Operating modes: Manual / Automatic Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 0.6 kW Rated current: 6.0 A CE marking available Water connections: Water inlet: max. 6 bar Water outlet: without back pressure Adjustable water flow rate Flow meter Regulating valve Manometer Control / Equipment: Touch operating panel Program editor / adjustable test time Operating hours, status and alarm display Stainless steel test chamber Large transparent test chamber door Pivoting tube with spray nozzles Rotating table / Test specimen table Height-adjustable test specimen holder Water inlet and outlet Side-mounted control cabinet Siemens SITOP power supply Lenze drive component Expansion options: With appropriate additional equipment, further IP tests are possible with the SWT series, e.g., IPX1 / IPX2, IPX4K, IPX5 / IPX6 and IPX9K. Iedpfjzzk Tbjx An Iobc The additional test equipment or high-pressure units required for this are not included in the scope of supply for this offer. Application areas: Spray and splash water testing IP protection testing Electronics and electrical components Automotive components Sensors and control units Enclosures and luminaires Quality assurance Development and testing laboratories Dimensions / Transport data: Test chamber (L × W × H): approx. 2,350 × 2,400 × 2,650 mm Without hinges / door locking: approx. 2,350 × 2,400 × 1,850 mm Weight of test chamber: approx. 650 kg Transport by forwarding agent Condition: Used Operating hours: approx. 755.9 h Optical condition according to the pictures. Scope of delivery: WEISS SWT 600/800 Spray and Splash Water Test System Pivoting tube spray device Rotating table / Test specimen table Touch control Side-mounted control cabinet Equipment according to the pictures Availability: by arrangement. Scope of delivery as shown. Subject to changes, errors and prior sale.

Condition: new, STRUERS Metallographic Cutting Machine Struers Labotom-5 NEW / unused – Year of manufacture 2025 Complete system with base cabinet, recirculating cooling unit and accessories For sale is a new, unused metallographic cutting machine from the manufacturer Struers including base cabinet, recirculating cooling unit and accessories. The Struers Labotom-5 is suitable for manual sectioning of material samples for metallographic sample preparation in laboratories, industry and quality assurance. The system has not yet been assembled or put into operation and is in its stored, shipping condition. Technical data: Manufacturer: Struers Type: Labotom-5 Article number: Year of manufacture: 2025 Type of equipment: Metallographic cutting machine Operation / Feed: Manual Electrical data: Mains connection: 3 × 380–415 V / 50 Hz Motor power S3 60 %: 2.2 kW Motor power S3 15 %: 3.2 kW Rated current: 5.3 A Maximum current draw: 10.6 A Cutting wheel: Diameter: 250 mm Inner hole diameter: 32 mm Speed: 2,910 rpm at 50 Hz Cutting capacity according to manufacturer: Maximum diameter: 90 mm Height × Length: 42 × 120 mm Cutting length: 135 mm Cutting table: Width: 316 mm Depth: 225 mm T-slots: 10 mm Manual feed Dimensions and weight of the Labotom-5: Width main unit: 700 mm Width including handle and rinsing gun: 960 mm Depth: 760 mm Height with closed cover: 530 mm Height with open cover: 900 mm Equipment weight: 75 kg Recirculating cooling unit: Struers recirculating cooling unit System 3 Article number: Coolant tank: 50 liters Including related cooling components according to parts list and images Equipment: Closed cutting chamber with safety cover Manual cutting feed Cutting table with T-slots Rinsing gun Coolant supply Base cabinet / table Separate recirculating cooling unit with 50-liter tank Clamping tools and service kit according to scope of delivery Application areas: Metallography Material testing Sample preparation Quality assurance Research and development Industrial laboratory applications Scope of delivery: 1 × Struers Labotom-5 cutting machine – Art.-No. × Recirculating cooling unit System 3, 50-liter tank – Art.-No. × Base Plate 10 mm Left – Art.-No. × Base Plate 12 Left – Art.-No. × Table unit / Base cabinet – Art.-No. × Service kit Labotom-5 – Art.-No. 16042999 Further accessories, packaging and documents documented in the original photos, according to the illustrated delivery condition. Condition: NEW / unused Year of manufacture 2025 Not yet assembled or put into operation Main unit packed securely in a wooden crate for transport Base cabinet packed on a pallet and protected Further accessories packed separately No documented functional test The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. Ibjdjz Szddjpfx An Isc The illustration of the fully assembled machine is an EXAMPLE. The original photos show the actual delivery condition. Scope of delivery according to description and original photos. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 2013, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, Exo-Zell-EROWA automation with EDM314MF30+HSC600/5 Automation kit EROWA UPC table clamping system with adapter plate ITS/Powerchuck 10 pallet changing stations 150 electrode changing stations JMS-Certa identification Measuring machine DuraMAX EDM314MF30, year of manufacture 2013 Iedsz Sp Hajpfx An Iobc Technical data: Travel ranges XxYxZ 905x705x455mm Workpiece table: 1150x850mm Tank size 1200x900mm Filling height of the work tank 500mm Distance table/electrode holder 250/700mm Workpiece weight max. 3000kg Dimensions WxDxH 2090x3416x3100mm Machine weight 7500kg Operating hours 10,000h Control interface MF30 Backflushing filter with dirt container Integrated cooling unit Automatic tank refill Extinguishing system Co² Smoke extraction Fire protection flap Erosion generator exopuls+60A C-axis 100°/min with holding brake, direct measurement Direct measuring system in all axes HSC600/5, 5-axis, year of manufacture 2008 Control iTNC530i Milling spindle HVC140, 42000rpm Technical data: Travel range XxYxZ 650x550x400mm Travel range BxC B105+/- C endless Table diameter 410mm Distance table/spindle nose 600mm Workpiece weight max. 200kg Rapid traverse 50m/min Rotational speed B/C 80/80°/min HSK40-E 60-position tool changer Oil mist extraction Minimum quantity lubrication Manual control panel with handwheel Adjustable air/cooling supply Kinematics optimization Calibration sphere for kinematics optimization Length compensation for all axes HIB cooling unit Measuring probe Renisaw OMP400 Calibration ring Performance acceptance test Transport Commissioning on site Training

Condition: good (used), Shock Cooling Bath for White Asparagus The shock cooling bath is manufactured from food-grade plastic and is insulated on the outside. Thanks to its high pump capacity, all crates are cooled evenly. The bath is equipped with a dirt trap with a pre-chamber, electronic ice formation control, and large, easy-to-clean water drains. The model is protected as a utility model. The system is designed to rapidly reduce the temperature of white asparagus from a field temperature of approximately 22°C to 1°C. A continuous and gentle ice water bath is used to prevent damage to the delicate asparagus during the rapid cooling process. Pump for ice shower 380 Volt Internal dimensions: 260 × 88 × 25 cm Shock cooling capacity: 0.8–2.4 tons/day With cooling lid • Ice water bath made from food-grade plastic Even cooling of all crates through high pump capacity Electronic ice formation control Large water drain Bath insulated on the outside More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Iedpfx Anjz Rgmhe Ijbc See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 14,022 h, machine/vehicle number: 2621150, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: VARIOBEND / ASCO, controller model: VARIOBEND Touch Control, working width: 6,400 mm, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,300 mm, overall weight: 8,800 kg, total length: 7,200 mm, total width: 2,150 mm, total height: 1,600 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, year of last overhaul: 2025, Equipment: CE marking, angle stop, centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, We are offering for sale a VARIOBEND CNC sheet metal folding machine, manufactured by ASCO GmbH, Germany. Ijdpfx Anez Sz Txs Iobc The machine is currently owned by DIMING d.o.o., a company based in Slovenia, specializing in construction and sheet metal works. The machine is designed for precise and efficient sheet metal bending and is particularly suitable for roofing, façade construction and architectural sheet metal fabrication. Its robust construction and CNC-controlled operation ensure accurate, consistent and repeatable bending results, making it suitable for professional sheet metal processing. We are upgrading our machinery and investing in a newer-generation folding machine. The machine is available for inspection in Slovenia by prior arrangement.

Condition: used, Year of construction: 2010, operating hours: 11,700 h, Machine 1 – SI-G200MK5: equipped with 2 heads, each with 12 nozzles. Machine 2 – SI-F209: equipped with 1 head, intended for the placement of components such as ICs, BGAs, QFPs, etc. Ibjdpfx Anjz Hxxgo Isc Total operating ca 11,700 hours

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: TR-A-16/2024, working height: 900 mm, workpiece weight (max.): 120 kg, total width: 1,400 mm, total length: 4,670 mm, total height: 3,550 mm, empty load weight: 550 kg, height adjustment type: mechanical, load capacity: 120 kg, table width: 3,500 mm, table length: 3,000 mm, We offer this ROL-PAS TR-A BOX machine for the assembly and testing of roller blinds, in like-new condition, manufactured in 2024. Manufacturer: ROL-PAS Ibjdoz Hmbispfx An Ijc Model type: TR-A BOX Serial number: TR-A-16/2024 Date of manufacture: 12/2024 If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Year of construction: 2019, condition: ready for operation (used), A Göztepe belt cooling machine (cooling tunnel), which was used to extend product life, is available. Motor power: 4kW, inlet height: 1670mm, outlet height: 1150mm, base distance: 2000mm, working length: 8500mm, machine dimensions X/Y/Z: approx. 8600mm/1900mm/2600mm. Documentation available. On-site inspection is possible. Ibedpfx Aju Tiy Aon Isc

Condition: good (used), Year of construction: 2008, Hydraulically Height-Adjustable Pallet Truck from Witte - Alufix for loading coordinate measuring machines With Hovercraft Air Bearing Plate Ibodpfx Asw Nylken Ioc Pallet truck with hydraulic height adjustment from approx. 660 mm to 950 mm. Table top coated with a roller on the broad side for bridging height differences between the table and measuring plate. Internal dimensions approx. 900 x 700 mm. Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The surface is equipped with 50 mm grid pattern boreholes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the base. The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted measuring object to be moved very easily. Usable area (aluminum) is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive sector, etc. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this supplier."

Condition: excellent (used), Price per unit. For sale: a professional glue roller / glue applicator from Tünkers GmbH, designed for precise application of glue onto paper, cardboard, corrugated board, leather, fabrics, and other flat materials. This device is suitable for bookbinding shops, printing houses, production facilities, and anywhere where uniform glue distribution is required. The machine is equipped with a system of working rollers ensuring even glue application and adjustment of the amount of material dispensed. The robust, cast iron construction guarantees high durability and stable operation for many years. Ibedpfx Anoz Sm U Aj Iec Technical specifications: Manufacturer: Tünkers GmbH Type: Glue roller / glue applicator Machine number: 12/30274/22 Electric drive Rotation direction switch (left / stop / right) Adjustment of the amount of glue applied Two dispensing rollers Metal glue tank Adjustable work table Robust cast iron construction Made in Germany This device is ideal for working with glues used in bookbinding and packaging production. The visual condition corresponds to the photos.

Condition: like new (used), Year of construction: 2022, A Manz hot press is for sale. It is disassembled and stored in our warehouse, and can be inspected ready for connection. It was used in aircraft manufacturing. Ibedpeyhq Adjfx An Isc

Condition: used, Year of construction: 2019, Computerized Beveling Machine SS20, Skiving Machine, Leather edge and tip thinning machine Year of Construction: 2019 Condition: Ready for operation Functionality: Fully Functional Overall weight: 145kg Iedpezdgg Defx An Iebc Kw: 1.2 Hz: 50/60

Condition: new, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 747895.1, overall weight: 174 kg, For robot use. Pressing force: 55 kN Total stroke: 98 mm Power stroke: 7 mm The Tox Pressotechnik TZ 05.747895 is a hydropneumatic clinching pliers developed for precise and reliable joints in sheet metal processing. With its innovative technology, it enables the efficient joining of metal parts without additional materials such as welding rod or adhesives. The pliers offer high force transmission and ensure consistent results, even with complex geometries. Thanks to its ergonomic design and user-friendly handling, it is ideal for use in series production as well as in single-part production. The robust design ensures durability and ease of maintenance, while the compact size allows flexible integration into existing production lines. Iodovb Icdjpfx An Isbc