Used Crocodile Clamping Welding Device 70 Mm for sale (82,228)

Year of construction: 2002, condition: good (used), Make: HAEUSLER Type: Crocodile Year: 2002 Specifications Metric US Standard Min. shell inner diameter 1500 Max. shell inner diameter 6000 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 20 mm Maximium wall thickness 70 mm Max. section weight 30 T Max. weight total workpiece 120 T Ledpfxokwcnzs Akyjrk Dimensions (Estimate) Length 60000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2007, condition: good (used), Make: HAEUSLER Type: Clamp Year: 2007 Specifications Metric US Standard Min. shell inner diameter 1800 Max. shell inner diameter 5500 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 10 mm Maximium wall thickness 40 mm Max. section weight 15 T Max. weight total workpiece 60 T Lodpfokwcn Eex Akyerk Dimensions (Estimate) Length 24000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, lifting clamp, crane clamp, roller clamp -Manufacturer: VEB TAKRAF, roller clamp type WSI -Clamp range: 35-70mm Lrodpeir E Thsfx Akyek -Load capacity: 2000 kg -Dimensions: 620/210/235 mm -Weight: 21 kg

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 20 mm Lrjdsdkbgfopfx Akyjk -Load capacity: 1000 kg -Number: 1x terminal available -Weight: 10 kg

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Lodpfed Hb Imsx Akyerk -with chain: 1.3 m -Span width: 44 to 70 mm -Load capacity: 6300 kg -Dimensions: 300/460/H120 mm -Weight: 30 kg

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 35 to 70 mm -Load capacity: 5000 kg -Number: 3x terminals available -Price: per piece -Weight: 39 kg/piece Lsdpfx Asdg Snhskyjrk

Condition: good (used), We offer you here a used pallet rack stand of the manufacturer Mic Spica for sale. Technical data of the pallet rack stand: Lodpfxogzg Skj Akysrk Shelf system: Mic Spica Included in delivery: 01x pallet rack upright, used material colour: cream white Frame profile: 80 x 70 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( screwed framework ) 2.780 mm high 1.000 mm deep

Condition: good (used), Technical data of the pallet rack uprights: Shelving system: Mecalux Included in delivery: 01x pallet rack upright, used Material color: blue Frame type: M-81 Frame profile: 80 x 70 x 2,00 mm Lrodemmcd Njpfx Akyjk Incl. cross and diagonal braces, base plates The stands are pre-assembled ( screwed truss ) 8.000 mm high 1.100 mm deep Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: used, Dividing Head Lredpjy E T Dgsfx Akyok Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition

Condition: used, Year of construction: 2010, machine/vehicle number: xxxx, Lg.No. 26116 Technical data: - Length 2000 mm - Width 1000 mm - Plate height 200 mm - Wall thickness 25 mm - Hole diameter (perforations) approx. 28 mm - Center distance of perforations approx. 100 mm - Table height approx. 850 mm - Table height adjustable - 6 pcs. plug-in connecting bolts Lrodpey E N I Iefx Akysk - 2 pcs. stop (with elongated hole + round hole) 225 x 50 x 20 mm - Total weight approx. 1000 kg

Condition: good (used), Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters Lsdpfxey D Nkmj Akyjrk -Manufacturer: Reinecker, hob cutters, 2 pieces -Type: Ø 70 mm / Ø 67 mm KHSS-E -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 135/70/H70 mm -Weight: 2.1 kg

Condition: used, Year of construction: 2020, Ref. No. 26086 Technical Specifications: - Length: 2400 mm - Width: 1200 mm - Plate height: 200 mm - Wall thickness: 25 mm - Hole diameter of perforations approx.: 22 mm - Center distance of perforations approx.: 100 mm - Table height approx.: 850 mm - Table height adjustable - 16 pcs. plug-in screw clamps with clamping bridges - Approx. 22 pcs. plug-in connecting bolts - 6 pcs. stops and clamping angles approx.: 175 x 175 mm - 2 pcs. stops and clamping angles approx.: 300 x 200 mm Lsdoy Efm Tjpfx Akysrk - 8 pcs. stops with elongated holes + hole: 225 x 50 x 20 mm - 2 pcs. stops with elongated holes + hole: 225 x 50 x 25 mm - 6 pcs. stops with elongated holes: 150 x 50 x 20 mm - 2 pcs. stops with elongated holes: 150 x 50 x 25 mm - Total weight approx.: 1000 kg

Condition: good (used), Drill bits, twist drills, drill bits -Manufacturer: Maysso / Unisto / Hartner / Stock, Spiral drill bits 6 pieces Ø 51 - 70 mm -Type: Two-flute end mill, MK5 chuck with flat drill tip -Size/Quantity: see photo parts list -Price/Fee: complete -on request: various sizes/quantities available from further stock -Transport dimensions: 345/270/H100 mm Lrsdpfx Akey A Inueyjk -Weight: 23.7 kg

Condition: good (used), Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 1290 mm -Hole spacing: 240 mm / Ø13 mm see photos -Quantity: 8x replacement blades available -Price: per piece -Dimensions: 1290/15/H70 mm -Weight: 10.3 kg/pc. Lsdpjy Akchofx Akyjrk

Condition: used, Clamping unit for SK 40 tools. The metal tag reads Lorenz Ettlingen 7-191-020-0001 For secure clamping of tool holders with SK40 during tool changes – tool setup E.g. as an accessory for Lorenz gear shaping machine. Clamping vise / mounting table / clamping cube. Ljdpfx Akjyuwzmsysrk Clamping device for reliable fixation and securing. Price / details upon request All technical data subject to errors/misprints. We sell exclusively to countries within the European Union.

Condition: new, Year of construction: 2025, load capacity: 500 kg, 3-Axis Rotation and Tilting Positioner – 500, 1000, 2000, 3000 kg Load Capacity, Clamping Plate Diameter 0.5, 0.65, 0.8, 1.0 meters HDL 500: - Minimum height: 1000 mm - Maximum height: 1500 mm - Clamping plate diameter: 500 mm - Reach radius: 800 mm (cantilever) - Speed: 0.1 – 1 rpm These positioners have proven themselves in the fields of construction and agricultural machinery, commercial vehicles, industrial trucks, as well as in the aerospace and energy sectors. They are suitable for welding, assembly, machining, and more. With their stable and robust construction, flexible three-axis positioning (including overhead), and easy operation, they facilitate welding, assembly, and handling of large workpieces. - Faster production and increased productivity - Optimal positioning of the workpiece improves welding quality and enables higher deposition rates - Enhanced safety by significantly reducing dangerous crane handling - Simultaneous positioning along up to three axes without cumbersome re-clamping Lrodpfsulaxbox Akyek - Easy and ergonomic operation protects and relieves the operator - Flexibility thanks to modular adaptability and custom configurations Basic Principle: Due to the arrangement of the swivel arm rotation axis above the clamping plate, the arm acts as a counterweight to the workpiece. As a result, these machines are significantly more powerful than tilt rotary tables or tilt-rotational positioners. This principle allows handling of the specified loads in any position. Thanks to the endless rotation of two axes and additional height adjustment, all workpiece positions (including overhead) are possible. Table rotation speed is continuously adjustable from 0.1 to 1.0 rpm; from 2000 kg load capacity, 0.05 to 0.6 rpm. Supplied with wireless remote control. - Rotation range: 360° continuous - Swivel range: 360° continuous - Lift: 1000 – 1500 mm; from 2 tons load capacity: 1250 – 2000 mm - Arm outreach up to 1000 kg: 1 meter; from 2000 kg: 1.5 meters

Condition: good (used), Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table Lrjdpfxoxm Sqro Akyok -Welding turning device: turning length 3130 mm -Turntable: Ø 800 mm -Peak height: 870 mm -Speed: electrically continuously variable 0-3 rpm -Drive: Servo motor 1/1.6 kW with cooling, see photo of nameplate -Direction of rotation: Right/left rotation -Transport dimensions: 3890/900/H1420 mm -Weight: 880 kg

Condition: excellent (used), Pneumatic holding and clamping device from Linck. Lredpjrdvggefx Akyjk

Condition: used, functionality: fully functional, for extended medium to heavy-duty applications. With switchable power levels and mode control for a wider range of uses. • Cleans and passivates in a single operation • Can process any thickness of stainless steel • Electropolishing possible • Low operating costs • Cost-effective consumables and spare parts, saving time • Up to 10 times faster than pickling paste • No reworking required • No need for regrinding or polishing Ljdpfx Akeyx Sq Eoyerk Flexible and robust • Ideal for large objects • Durable high-performance brush • Splash-proof housing • Machine does not overheat • Cable can be extended up to 12 meters • Operates at 250 watts • Can be powered by a generator

Condition: used, length 750/630 mm Lodpfxsyycw Eo Akyerk width 780/530 mm depth 470/320 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Lredskvm S Nepfx Akyek Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, CNC / Milling Clamping Devices – Comprehensive Lot approx. 150 kg Description For sale is a comprehensive package of clamping devices suitable for CNC milling machines as well as conventional machining. This package comes from our workshop inventory and includes a wide variety of clamping and fixturing components that can be used universally in manufacturing, tooling, or maintenance applications. Due to the quantity and diversity, the lot is ideal as a basic set or to supplement existing clamping equipment. — Scope of Delivery (mixed package) • Clamping claws in various sizes • Fixture blocks and clamping pieces • Round holders / clamping plates • T-slot nuts and fastening elements • Screws and accessories • Various fixtures and single components Total weight: approx. 150 kg Sale is preferably as a complete package. — Condition • Used • Fully functional • Mixed assortment • Partially with signs of use — Commercial Notice The total value of comparable individual components is significantly higher than the asking price. This package offers a cost-effective opportunity to acquire a comprehensive set of clamping equipment. Ljdpfx Ajyx Hguskyjrk — Location & Collection Location: Eisenach Collection preferred (due to weight), but shipping by freight forwarder is possible upon request: €90 Loading by arrangement possible The sale is made with the exclusion of any warranty and liability for material defects. The clamping devices are purchased as seen.

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Lrodpfsyqr Sxox Akyok

Condition: new, Year of construction: 2022, functionality: fully functional, mount diameter: 38 mm, clamping range: 38 mm, 2 x Reishauer Clamping Device Base Unit Chuck FK 38 new - unused suitable for Reishauer gear grinding machine, fitting the spindle for machines RZ 150 / RZ 160 / RZ 260 clamping diameter: 38 mm for max. speed = 3,000 rpm balanced with clamping stroke monitoring / 3-point contact monitoring and provision for additional functions clamping / air supply monitoring / clamping stroke monitoring Lredjwzkcxopfx Akyok incl. assembly and operating instructions as well as Reishauer wooden transport container Price / details on request All technical specifications subject to typing errors / mistakes. We sell exclusively to countries within the European Community.

Condition: used, Ferromatik mixing screw Ø 70 mm for IU2495 and IU2650- removed from Ferromatik K-Tec 450 - removed from IU2495 - removed from running machine - fully functional- inlet: 69.80 mm - center: 69.80 mm - outlet: 69.80 mm Lodpfx Aeyxg Tbskyjrk - total length: 225.80 cmmanufacturer: Ferromatik Milacron