Used Cross-Layer for sale (5,041)

Condition: ready for operation (used), Year of construction: 1992, A dismantled Autefa compensating stacker is available. Working width: 3000mm, working speed: 60m/min. On-site inspection is possible. Podpfswwvw Tsx Ah Hora

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Prjdpfx Ahszp H R Es Hoa Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: like new (used), Range (depending on lighting conditions): up to 15 m Range with laser receiver: 30 m and more Leveling accuracy at 5 m: +/- 1 mm Prjdpfod Ecncjx Ah Hea Self-leveling range: 4° +- 0.5° Accuracy of the horizontal line at 5 m: +- 1.5 mm Accuracy of the vertical line at 3 m: +- 0.75 mm Number of laser lines: 2 Weight: 485 g

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Predpfefv Hphox Ah Hoa Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, Hüllhorst double miter saw in good, used condition. The miter angle cannot be adjusted on this machine. Year of manufacture unknown. The double miter saw has been used reliably for many years in the production of moldings and is still connected to the power supply. The machine is being sold as part of the liquidation of our carpentry business. Collection price – delivery possible upon request. The sale is made excluding any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, limb, or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected. Prodpfjzpfk Rsx Ah Hea An inspection of the machine is possible by arrangement.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, For sale is an R. Beck multi-level gluing press in a robust industrial design. This machine is ideally suited for efficient carcass, frame, and panel construction, as well as for a wide range of gluing applications in carpentry and furniture making. The 5 independently operated press levels allow for the simultaneous processing of multiple workpieces, resulting in high productivity. Technical data: Manufacturer: R. Beck Maschinenbau Year of manufacture: 1997 Usable length: 2,000 mm 5 press levels Operating pressure: 6 bar CE version Machine no.: 270 Equipment: Pneumatic multi-level gluing press 5 press levels, individually selectable Pneumatic pressing Multiple clamping cylinders per level Even pressure distribution Control panel with individual control of the press levels Mobile base frame Prsdpfszm Slvex Ah Hja Robust industrial design Ideal for carcass, frame, and panel gluing Application areas: Furniture manufacturing Carpentry Joinery Carcass gluing Frame gluing Panel gluing Series production Condition: The machine is in used, well-maintained condition with the usual signs of wear and tear consistent with its age. Thanks to its robust construction, it is ideally suited for professional use in crafts and industry. Inspection and test run are possible at any time by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: used, functionality: fully functional, Well-maintained, inclined cross conveyor from Esterer, originating from a small sawmill. Drive via geared motor. 6 chain strands. Spacing: 2300 mm - 1500 mm - 1200 mm - 1000 mm - 1200 mm. Prodpfx Ajzw Epcjh Hja Conveyor length approx. 3000 mm. Chain pitch 80 mm.

Year of construction: 1994, condition: used, Technical data: Prsdpfx Ahoya H Hie Hja - Manufacturer: Cefla with cross axle - Type: TN/L - Length: 1740 mm - Belt width: 1.400 mm - Total width: 1.600 mm - Height: 950 mm - Year of manufacture: 1994 - Feed rate approx. 2 - 8 m/min. - FU control for feed rate 50 Hz - Frequency converter required on site - Location: in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW - Voltage fluctuations max. +/- 5% - Location: in stock

Year of construction: 1998, condition: used, with powered roller conveyor as a folding table, length 500 mm Technical specifications: - Manufacturer: Celfa - Year 1998 - Model: TTE 2000 - Year of manufacture: 1998 - Working width: 1,300 mm - Overall width: 1,580 mm - Length: 2,000 mm (1,500 + 500 mm) - Working height: 930 mm ±20 mm - Bar diameter: 25 mm - Chrome-plated bars - Bar spacing: 95 mm - Roller spacing on folding table: 115 mm - Feed speed 2,1 - 12,3 m/min. - Feed speed adjustable, handwheel - Motor power, drive: 0.26 kW Exx-d Predpfxozgt A Ns Ah Hea - Volts / Hz: 400 V / 50 Hz - Feed speed: approx. 5–25 m/min. - Feed via handwheel adjustment - Location: in stock

Year of construction: 2002, condition: used, - Manufacturer: Elmag Superfici - Type: TT1-30 Predpfx Asx Url Ujh Hja - With cross carriage wheels - Length: 3,000 mm - Working width: 1,350 mm - Total width: 1,660 mm - Working height: 900 + - 20 mm - Height adjustable - Location, in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: 2003645, Year of construction: 2013, operating hours: 11,961 h, load capacity: 9,000 kg, lifting height: 4,500 mm, free lift: 580 mm, load center: 1,050 mm, fuel type: electric, mast type: mono, motor manufacturer: Hubtex, battery manufacturer: Heppecke, battery model: Nass-Batterie Aquamatic EUW, battery capacity: 465 Ah, battery voltage: 48 V, battery weight: 731 kg, fork carriage width: 200 mm, fork length: 2,100 mm, ground clearance: 75 mm, turning radius (outer): 2,650 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), rear tire size: 343X114, empty load weight: 4,335 kg, total length: 3,638 mm, total width: 1,650 mm, color: orange, Equipment: CE marking, UVV, head guard, Special design: see documents – product specification + EC declaration of conformity. Drive and steering motor requires repair. Prsdpfx Ahszwpp Ho Hoa Spare parts package.

Condition: used, Year of construction: 2005, total height: 1,750 mm, total length: 1,350 mm, total width: 1,350 mm, Colour: Grey Weight: 415 kg Optimization cross-cut saw Stromab TR 500 Matrix 4 4000 Year of construction 2005 Engine power 10 hp Auto push-up system Inkjet printer - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 250143 - Main motor power [kW]: 7.5 - Max. saw width [mm]: 375 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 4300 - Output table length [mm]: 2000 - Transport dimensions: 1350mm x 1350mm x 1750mm (l x w x h) - Transport weight [kg]: 415kg - Transport packages [pcs.]: 3 Pjdpfx Aowq U Dxeh Hora Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2003, Saw blade diameter: 350 mm, bore diameter: 30 mm, motor: 2 kW, speed: 3800 rpm. Extraction connection diameter: 95 mm. Weight: approx. 105 kg without stand. Cutting width at 90°: 430 mm, at 45°: 300 mm. Cutting height: 135 mm. Hydraulic return brake. Without stand and roller conveyors. Psdoyw Tzijpfx Ah Hora

Condition: used, Year of construction: 2016, Transnorm roller conveyor ejector GF 4510-1120-1000 RA1854 Make: Transnorm Roller width (RB): 1030 mm, Steel rolls Nominal/outer width (NB): 1050 mm Predjk Abhhjpfx Ah Hoa Rolls diameter: 50 mm length: 3715mm Overall height frame: 250 ejector angle: 30° in both sides 7 rows ejector individually controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: with supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Prsdpfxsrg Nzuo Ah Hsa Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Prsdpfx Aorg Nzxeh Hoa Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Pedporg Nzqjfx Ah Hera Your specialist and contact for intralogistics

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader Psdpfx Aheypvdio Hora 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt

Year of construction: 2019, condition: like new (used), Board cross conveyor for sale. Six controls. Distance between controls 0.85 m. Width 4, 40m. Length 2.80 m. Drive, motor reducer 1.5 kw. In full working order, after repair. Psdpfjnl Dvlox Ah Hera

Condition: used, Year of construction: 2013, functionality: fully functional, One side scanner for sorting or optimization: Width: 30-200mm High: 13-50mm Length: 2-6m Prjdpfxsv Tlgde Ah Hsa Possible to detect: Knots, wood structure, cracks, end cracks, color variations etc. Scanning speed: up to 200m/min Possible to scan different profiles

Condition: new, Year of construction: 2026, The cross splitting wedge (4-way) is an additional accessory designed for 7-ton log splitters, expanding their capabilities and improving work efficiency. It allows a log to be split into four pieces in a single operating cycle, making the preparation of firewood faster and more efficient. The cross wedge is designed for CORMAK LUP 7T and CORMAK LUP 7TS log splitters. It is made of steel, welded for durability, and protected with a powder-coated finish. Specifications: Length: 130 mm Depth: 110 mm Overall width: 150 mm Main wedge width: 85 mm Psdpfjzwlkajx Ah Hora Cross knife length: 60 mm Manufacturer: Cormak

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. Psdpfxezuzcts Ah Hera - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S

Condition: used, Year of construction: 2011, Cross-cut and rip saw Manufacturer: HOLZMA Type: HQP 11/16/56/LX Year of manufacture: 2011 Technical data - Combined saw unit with cross-cut saw unit, cutting length 1,600 mm, and rip saw, cutting length 5,600 mm - additional pressure cylinder - postforming unit - waste flap 1600 mm - clamping device for cross-cut saw, 2-finger - automatic ejector guide - roller conveyor designed for 1,300 mm width - second drive in the roller conveyor - 1 m shaking chute 550 mm (driven) - mobile CADMATIC control panel - cooling unit for individual saw - with vacuum loading system and outfeed table Predpfxszuyzzo Ah Hoa Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1999, functionality: fully functional, cutting height (max.): 100 mm, cutting width (max.): 2,500 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, Equipment: saw blade guard, Double-blade panel saw, Eima Type 122 Cutting width, min/max: 210-2500 mm Cutting depth: 2500 mm Predezwkrvopfx Ah Hsa Maximum blade diameter: 400 mm Cutting height: ~100 mm Motor power: 2 x 4.4 kW Electronic cutting width adjustment

Condition: excellent (used), Stainless steel version, Pedpfx Ajhvyzwsh Hsra Length: 1400mm Width: 1200mm Height: 1900mm Weight: about 250kg