Used Cts Klimaprüfzelle -60°C To +120°C 6000 Liters (6 M³) for sale (112,854)

Condition: used, Description: CTS climate test chamber CW-60/6 -60°C to +120°C 6,000 liters (6 m³) Temperature range: -60 °C to +120 °C Temperature deviation: ±0.5 to 1 K over time Heating: 1 K/min from -40 °C to +80 °C Cooling: 1 K/min from +80 °C to -40 °C Temperature range: +10 °C to +95 °C Humidity range: 10% to 85% relative humidity In dew point range: +5°C to +89°C Temperature deviation: ±0.5 K over time Humidity deviation: ±1 to ±3% r.h. over time Ledpfx Ajygr E Rsmtohi Dimensions: Internal dimensions: Volume: approx. 6,000 liters (6 m³) Approx. internal dimensions: Height: 2,000 mm, Width: 2,000 mm, Depth: 1,500 mm

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Ljdpfx Ajzizghemtehi Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Ljdezizdyepfx Amtshi Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: new, Heidenhain BC 120 monitor unit 15" TFT SN: 30938147 consisting of Heidenhain 329 506-01 additional keyboard and Viscotech SEM15-F-BC120-FP industrial monitor for TNC426, TNC430 / BC120, BC120F, used, in good condition, 100% functional, scope of delivery as per photos. Lsdpfx Ajy Nqdfemtohi

Condition: ready for operation (used), Mitsubishi HA33C-S synchronous servo motor, serial number: M54644060 + Tamagawa OSE 12.5KN-6-12-0 rotary encoder, serial number: 7945T, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Lhjdpfx Aoi D I N Uemtji

Condition: excellent (used), functionality: fully functional, mileage: 160,000 km, power: 161.81 kW (220.00 HP), first registration: 04/2019, fuel type: diesel, overall weight: 120,000 kg, axle configuration: 4x2, wheelbase: 5,670 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, loading space length: 7,600 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, Equipment: ABS, air conditioning, onboard computer, traction control, 🇬🇧 IVECO Eurocargo 120-220 Box Body Configuration Internal dimensions: 7.60 x 2.50 x H 2.60 m First registration: 04/2019 Mileage: 160,000 km Manual transmission Double bunk bed Wheelbase: 5,670 mm Car radio Air conditioning / electric windows FINANCING OR CUSTOMISED LEASING PACKAGES AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, INCLUDING ZERO DOWN PAYMENT OPTIONS. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL – NAPLES BRANCH DOMENICO ESPOSITO S.P.A. – EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY: 8:30 am – 7:00 pm SATURDAY: 8:30 am – 2:00 pm WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Ledsvpauhspfx Amtohi Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500 – Stralis – Man - Nissan V8 - Intarder – 770s - Limited Edition - 660 S Semi-trailer – Refrigerated Semi-trailer – Tipper – Fixed Platform – Crane – 4 axle – Rear 4 Axles – Tway – T-Way-540-460 hp – Xway - X-Way – Three-way tipper – V8 – Scania – Frost Edition Curtain Sider – Box – Tail lift – Refrigerated box – Insulated with fridge – Box body Domenico Truck srl disclaims any liability for discrepancies in technical specifications, options, and features that may in certain cases differ from those described. Please check the features of the specific vehicle.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,459 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: 18i, number of axes: 4, This 4-axis EMCO MC 120-60 vertical machining centre was manufactured in 2008. It features an X-axis travel of 1200 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a Fanuc 18i control unit and a tool magazine with 30 stations. It includes a Lang Eco Compact clamping system. If you are looking to get high-quality machining capabilities, consider the EMCO MC 120-60 machine we have for sale. Contact us for further details. • Quantity: 2 machines (offered together) • 4th axis: Yes, mounted • Tool magazine: 30 stations • Automation: Lang Eco Compact 10 (2011) (fully functional) Additional equipment, not included Ljdpfx Ameyxnmvotjhi • Chip conveyor • Band filter • Tool holder package SK40 • 10 vices • Custom-made wooden floor grating for ergonomic loading Technical Specification Taper Size SK 40

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Ljdpfjzizmusx Amtehi - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Lhedpfxozizmnj Amtsi Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) Ljdpfxjzizmbj Amtshi - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis cab – new vehicle with day registration, 33t variant, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer warranty valid until 16/12/2026 MAN ATS warranty valid until 16/12/2027 Commercial tonnage: 33 tonnes Permissible gross weight: 26,000 kg Permissible total vertical load (Tech. Plus): 28,000 kg Mileage approx. 1,335 km (transfer mileage) Medium height design Short NN cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque 6x4 drive Wheelbase 3,600 mm, 800 mm rear overhang Differential locks on rear axles MAN TipMatic 12.28 OD automatic transmission PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 o’clock High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging Transmission function MAN Idle Speed Driving Transmission for increased push/pull share in driving operation MAN TipMatic driving programs: Performance and Efficiency up to 70,000 kg MAN TipMatic driving program: Offroad up to 70,000 kg MAN TipMatic Manoeuvre mode, shunting function Creeper function MAN EasyStart MAN ComfortSteering system Full brake assist Emergency brake assist EBA Lane Departure Warning LDW Driver alert system MAN AttentionGuard Offroad ABS with additional terrain logic EBS, ASR, ESP Front axle leaf sprung, rear axles air suspended Front axle: 9,000 kg, Rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilisers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling ROCKINGER type 500 G 6B for trailer load up to 24,000 kg (Tech. Plus) Permissible gross combination weight (Tech. Plus): 44,000 kg Climatronic 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 beacons on cab roof LED daytime running lights LED rear lights and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operation panel, 4 functions, operable from outside with door open Air-suspended and heated driver comfort seat Comfort seat covers Smartphone integration MAN Sound System Advanced MAN Media System Advanced Navigation 7 inch New vehicle, day registration on 16/12/2025, with MAN manufacturer's warranty Net price plus 19% VAT. Attractive financing offers available on request. All information provided without guarantee. Subject to error and prior sale. Internal vehicle number: 2571 Lhedpfx Aox I T Ukjmtei

Condition: used, mileage: 1,335 km, power: 382 kW (519.37 HP), first registration: 12/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis cab – new vehicle with day registration, 33t variant, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. Lhedpfx Aex Txw Iemtsi MAN manufacturer warranty valid until 16/12/2026 MAN ATS warranty valid until 16/12/2027 Commercial tonnage: 33 tonnes Permissible gross weight: 26,000 kg Permissible total vertical load (Tech. Plus): 28,000 kg Mileage approx. 1,335 km (transfer mileage) Medium height design Short NN cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque 6x4 drive Wheelbase 3,600 mm, 800 mm rear overhang Differential locks on rear axles MAN TipMatic 12.28 OD automatic transmission PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 o’clock High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging Transmission function MAN Idle Speed Driving Transmission for increased push/pull share in driving operation MAN TipMatic driving programs: Performance and Efficiency up to 70,000 kg MAN TipMatic driving program: Offroad up to 70,000 kg MAN TipMatic Manoeuvre mode, shunting function Creeper function MAN EasyStart MAN ComfortSteering system Full brake assist Emergency brake assist EBA Lane Departure Warning LDW Driver alert system MAN AttentionGuard Offroad ABS with additional terrain logic EBS, ASR, ESP Front axle leaf sprung, rear axles air suspended Front axle: 9,000 kg, Rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilisers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling ROCKINGER type 500 G 6B for trailer load up to 24,000 kg (Tech. Plus) Permissible gross combination weight (Tech. Plus): 44,000 kg Climatronic 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 beacons on cab roof LED daytime running lights LED rear lights and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operation panel, 4 functions, operable from outside with door open Air-suspended and heated driver comfort seat Comfort seat covers Smartphone integration MAN Sound System Advanced MAN Media System Advanced Navigation 7 inch New vehicle, day registration on 16/12/2025, with MAN manufacturer's warranty Net price plus 19% VAT. Attractive financing offers available on request. All information provided without guarantee. Subject to error and prior sale. Internal vehicle number: 2571

Condition: used, mileage: 1,335 km, power: 382 kW (519.37 HP), first registration: 12/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2026, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis cab – new vehicle with day registration, 33t variant, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer warranty valid until 16/12/2026 MAN ATS warranty valid until 16/12/2027 Commercial tonnage: 33 tonnes Permissible gross weight: 26,000 kg Permissible total vertical load (Tech. Plus): 28,000 kg Mileage approx. 1,335 km (transfer mileage) Medium height design Short NN cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque 6x4 drive Wheelbase 3,600 mm, 800 mm rear overhang Differential locks on rear axles MAN TipMatic 12.28 OD automatic transmission PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 o’clock High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging Transmission function MAN Idle Speed Driving Transmission for increased push/pull share in driving operation MAN TipMatic driving programs: Performance and Efficiency up to 70,000 kg MAN TipMatic driving program: Offroad up to 70,000 kg MAN TipMatic Manoeuvre mode, shunting function Creeper function MAN EasyStart MAN ComfortSteering system Full brake assist Emergency brake assist EBA Lane Departure Warning LDW Driver alert system MAN AttentionGuard Offroad ABS with additional terrain logic EBS, ASR, ESP Front axle leaf sprung, rear axles air suspended Front axle: 9,000 kg, Rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilisers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling ROCKINGER type 500 G 6B for trailer load up to 24,000 kg (Tech. Plus) Permissible gross combination weight (Tech. Plus): 44,000 kg Climatronic 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 beacons on cab roof LED daytime running lights LED rear lights and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operation panel, 4 functions, operable from outside with door open Air-suspended and heated driver comfort seat Comfort seat covers Smartphone integration MAN Sound System Advanced MAN Media System Advanced Navigation 7 inch New vehicle, day registration on 16/12/2025, with MAN manufacturer's warranty Ljdpsx I T Tmofx Amtshi Net price plus 19% VAT. Attractive financing offers available on request. All information provided without guarantee. Subject to error and prior sale. Internal vehicle number: 2571

Year of construction: 2003, condition: excellent (used), Working travels 6000x1000x1200mm B-Axis milling head +/-90° Table size 6400x1000mm Spindle taper HSK-100 Spindle speeds -9000 rpm Tool changer 80 pos. Lhodpfx Aod Rz Uvsmtei Control SIEMENS 840D Coolant through spindle Tool measuring device Zero point clamping system 3R MARCELS MASCHINEN CH

Condition: ready for operation (used), Siemens 7ME4110-2CC10-1AA0 SITRANS F C MASS 6000 SN 095819N256, as new, 100% fully functional, delivery contents as per photos. Lhedpfx Aey Nr Ryjmtsi

Condition: ready for operation (used), Siemens SITRANS F C MASS 6000 FDK:083H0204 SN 134335N324, used, in good condition, 100% functional, delivery as per photos Lodpfxey Ntbao Amtehi

Condition: ready for operation (used), Siemens 7ME4110-2CC10-1AA0 SITRANS F C MASS 6000 SN 010912N405, used, in good condition, 100% fully functional, delivery as shown in photos. Ledpfx Aoy Nr Rtjmtjhi

Condition: ready for operation (used), Siemens 7ME4110-2CC10-1AA0 SITRANS F C MASS 6000 SN 190919N406, as new, 100% functional, delivery as per photos. Lhsdpfx Amey Nr R Hetsi

Condition: ready for operation (used), Siemens SITRANS F C MASS 6000 FDK:083H0204 SN 134835N324, used, in good condition, 100% fully functional, delivery as shown in the pictures. Lhsdpfx Aoy Ntbgjmtei

Condition: used, VERTICAL MACHINING CENTER "FAMUP" MOD. MC 120/60 Lsdpoxwclhofx Amtohi X-axis travel: 1200 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Rapid traverse X-Y-Z = 40-40-40 m/min Spindle: 12,000 rpm, 22.5 kW ISO 40 - DIN Table size: 1380x600 mm Max. permissible load: 800 kg Tool magazine: Random, 30 positions Control: SELCA S4045 PDH

Condition: new, We offer you a new pallet racking crossbar for sale here. Thanks to the hot-dip galvanized surface, these crossbars are suitable for outdoor use. Technical data for the pallet racking crossbar: Racking system: Lücht & Palm Type: MB Included in the scope of delivery: 01x Pallet racking crossbar, new Material color: hot-dip galvanized Lhedpfx Amjhg Tkkjtji IPE profile: 120 x 60 mm Design: Head crossbar Agraffe: 2 HK (hooks) Clear width: 1,800 mm Maximum load per pair of crossbars: 3,600 kg, with evenly distributed load 1x Set HV fitting set EN14399-4 - EN14399-6 10.9 hexagon head bolt with nut and washer for HV connection Material color: hot-dip galvanized These crossbars have an upstand for the placement of shelf grids, which is welded on. (Height: 40 mm / Material thickness: 4 mm)

Condition: used, Year of construction: 2009, mileage: 164,540 km, power: 169 kW (229.78 HP), first registration: 07/2009, overall weight: 18,200 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 07/2028, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, Internal vehicle number: G300426 Available immediately on our premises in Kaufungen More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Sweeper truck, Scania P 230 Engine for the superstructures: IVECO Manufacturer, model: Scania, B4X2 Engine displacement (cc): 3250 Power (kW / hp): 169/230 Total mileage (km): approx. 165,000 First registration: 03.07.9 Number of seats: 2 Paintwork: orange Seat upholstery: fabric Next inspection (TÜV): 09/2026 Transmission type: manual Next service: 01/2026 Fuel type: diesel Tires (size): 305/70 T22.5 Standard and special equipment: Sweeper system type: Johnston VT650 KUPPER WEISSER side and circular brushes, container 6 m³, sweeper system can be selected for one side (right) Two-engine sweeper vacuum trucks Stage 3a / Tier 3 engines EC DECLARATION available Financing example: * Internal number: G300426 * Purchase price: 29,900.00 EUR * Down payment: 10% * Term: 60 * Monthly rate: 457.02 EUR * Residual value: 6,080.00 EUR If you are interested in this offer or would like to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as part payment. Lodpfx Aoxz I Nmemtshi Financing is available directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, Ledpfxju Ib Dre Amtehi - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: ready for operation (used), Year of construction: 1991, A professionally dismantled and preserved steam boiler system with a Loos steam boiler and Weishaupt burner is available. 1) Loos UL steam boiler, year of construction: 1991, max. steam output: 6000kg/h, max. operating overpressure: 16bar. 2) Dual fuel burner Weishaupt Monarch RGL 60/2-A, year of construction: 1991, version: ZM, output range: 800kW-6600kW, gas type: N, gas category: I, gas setting pressure range: 30mbar-170mbar, oil throughput range: 120kg/h-556kg/h. Documentation available. An on-site inspection is possible. Lhsdpfoy Ndgtex Amtei

Condition: new, pressure: 60bending length: 1550column width: 1250daylight: 410stroke lenght (max.): 220column throat depth: 400messurements (LxWxH): 2445x2200x2390weight approx.: 4250motor power: 7,5 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK-Industries made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Lhodpfjd En R Dox Amtoi Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X via the control. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X  Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Option: r-Achse                                                                                   ¤ 5.375,-- Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)    ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,00