Used Dürr Mpdk X20 for sale (824)

Condition: new, Year of construction: 2013, functionality: fully functional, Dürr RAM Station Double barrel pump Pumps and dosing concept MPDK X20: Type L10011525 Bjdpfju Eqkvsx Ahmswu - Pneumatic gun PVA08/40 - Heatable hose KMHH6007/040 - Electric dosing unit ED150/7 The device is unused!!!

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps Bsdpfoz Ai Tpsx Ahmswu SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: like new (used), Year of construction: 2025, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) Bwodjz Ebwpopfx Ahmou ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2004, functionality: fully functional, DÜRR Aqueous Cleaning System with large baskets – available in single or double basket configurations. System is available ex location; a large quantity of spare parts is included in the delivery. Price on request Our Plant and Machinery Service: High availability – maximum productivity! Downtime costs time and money – that's why we ensure your machines and systems run reliably and efficiently. Our experienced team of qualified service technicians supports you with expertise, commitment, and complete service from a single source. Our Service Promise: We keep your systems in optimal condition – from mechanics and electronics to refrigeration technology. Whether maintenance, repair, or optimization: We ensure smooth operations. Overview of our services: 🔧 Electrical / Electronic Service • Professional troubleshooting and repairs • Modifications, upgrades, and modernization of controls (all common manufacturers) • Optimization of existing systems • Spare parts service for fast recommissioning ⚙️ Mechanical Service • Fast crash repairs and expert restoration • Regular maintenance and servicing of your equipment • Modifications, adjustments, and expansions • Installation and commissioning of new machines • Refrigeration plant inspections according to §6 Section 1 of the Chemicals Climate Protection Ordinance We carry out almost all mechanical and electronic work precisely, reliably, and on schedule. _____ Bwjdpfxox Emy Uo Ahmsu Why we are the right partner for you: ✅ Everything from one source – mechanics, electrics, refrigeration ✅ Experienced technicians with extensive expertise ✅ Fast response times and flexible solutions ✅ High system availability through preventive maintenance

Year of construction: 2003, condition: ready for operation (used), This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us. Additional equipment • Scaffolding with cladding • Work tank // Flood tank 1 // Condensate tank // Flood tank 2 • Continuous distillation • Automatic sliding door Bjdpfx Ajzzn Hxehmjwu • Water separator • Bogie without cover • Storage with drive • Drying cooler • Vacuum unit - drying process // Vacuum unit // Vacuum filling/emptying device • HD - IFW Circulation filtration including chip rinsing • 6 baskets included Machine Benefits Technical Machine Benefits • Control panel • Ultrasound (1 rod transducer) • Heating fb2 • Hgz 028 cooling unit • Reinforced cooling (hgz 064 cooling unit and cooling coils in fb1, fb2, desti. ) • Filling/emptying device for fb2 • Dummy for fb2 • Preservation equipment • Single filter for fb1 // filtration for fb2 • Automatic feeding Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cutting width (max.): 1,270 mm, cutting length (max.): 1,680 mm, Equipment: documentation/manual, Professional Kongsberg X20 cutting and creasing plotter. This device is extremely versatile and efficient, designed for the production of packaging, POS materials, and the processing of rigid and flexible materials. The machine combines Scandinavian reliability, precision, and flexibility, allowing for quick adaptation to diverse jobs. The unit we have was purchased from a Dutch printing company and was used in the prototyping department. Maximum cutting speed: 30 m/min Acceleration: 3 m/s² Material clamping system: multi-zone vacuum table with a powerful 6 kW vacuum pump, guaranteeing a perfectly flat arrangement even for the most demanding materials. Positioning camera: integrated vision system for reading markers (matching print to cut). The machine is equipped with: - a FlexiHead, which allows for the simultaneous mounting and use of three tools in a single work cycle, without the need for constant replacement. - two drag knives: - psaligraphy knife for precise cutting of films and papers - currospeed knife for cutting thick materials, solid and corrugated cardboard - creasing wheels: a set of creasing wheels with a diameter of 26.0mm and different geometries (2pt; 3pt; 4pt), enabling perfect bending of cardboard and carton without fiber cracking. The price of the machine includes a computer with a dedicated control system and i-cut Production Console software, compatible with Artios CAD. The software primarily imports files in pdf, acm, dfx, and ADR formats. The machine is in continuous operation and is regularly serviced by an authorized partner (the last service was performed in January 2026). It is possible to perform tests on customer materials before purchase. Bjdpfoz Egikox Ahmswu

Condition: used, Year of construction: 2004, Batch size (max., approx.) 1.340 x 480 x 480 mm charge load ca. 200 kg output rate ca. 3.000 kg/h cycle time ca. 4 min Loading height 460 mm heating capacity 150 kW heating time ca. 3 Std. required air pressure 6 bar Fresh water 3 bar Bwjdpfjzhxm Asx Ahmeu Number of working hours ca. 77.034 h total power requirement ca. 192 kW weight of the machine ca. 11 t dimensions of the machine ca. 3,60 x 10,10 x 3,25 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Here, we offer you a DÜRR testing station for adhesive applicators. DÜRR testing station for adhesive applicators, including (5 robot-guided adhesive applicators). DÜRR testing station (custom-built by Dürr) for the automotive industry. Weight: 1200 kg Type: DÜRR testing station for adhesive applicators Condition: used Scope of delivery: (See image) Bwsdpszd Ukvofx Ahmeu (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2004, condition: ready for operation (used), Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible. Bedexwcvgepfx Ahmowu

Condition: not inspected (used), DÜRR Bwsdpfx Ahszgckcjmju Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system The drum pump, feed hoses, dispensing unit, etc. are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure, max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 Adhesive control unit DÜRR (110017040) 1 Single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 1998, cleansing medium Per filling amount 15.000 l heating capacity 275 kW Cooling capacity 43 kW Batch size LxWxH (max., approx.) 2.250 x 1.00 x 1.150 mm Batch weight (approx.) 1.000 kg Throughput (approx.) 2 Chargen/h Cycle time (approx.) 30 min Loading height 1.010 mm Distillate output (approx.) 1.000 ltr/h base area 20 x 10 m Number of working hours ca. 67.904 h connected load 122 kW connected load frequency 3 x 400 V ampere 262 A dimensions ca. 15.000 x 8.200 x 6.00 mm In our assessment, the machine is in good used condition and can be inspected Bsdpjzid Dvefx Ahmewu under power by appointment. Dimensions and weights - Overall dimensions Length: 15,000 mm Width: 8,200 mm Height: 6,000 mm - Vacuum chamber (usable dimensions) Length: 1,630 mm Width: 3,500 mm Height: 1,510 mm - Product weight: 200 kg Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: reconditioned (used), Cleaning agent: hydrocarbon or modified alcohol. Bodeznhgropfx Ahmjwu

Condition: used, axle configuration: 3 axles, first registration: 03/1992, color: other, Year of construction: 1992, Empty weight: 4.600 kg Axle 1: left 6 mm right 7 mm Axle 2: left 7 mm right 6 mm Axle 3: left 6 mm right 6 mm Bwsdszt R Rdspfx Ahmeu We have the possibility to stack trailers!

Condition: good (used), Year of construction: 1999, Aqueous cleaning system in good condition with vacuum dryer (pump not included). Available immediately. Bwsdpfxed Nnvhj Ahmeu

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 511904J00086, Year of construction: 2018, operating hours: 3,705 h, load capacity: 2,000 kg, lifting height: 8,600 mm, fuel type: electric, mast type: triplex, overall weight: 4,210 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 8,600 mm Bwodpfxsz D U Rgo Ahmsu Free lift: Yes Travel direction: 2 travel directions MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery type: 5 PZS 775 Battery year of manufacture: 2019 Battery capacity: 775 Ah Battery voltage: 48 V Battery tray length: 1,220 mm Battery tray width: 425 mm Battery tray height: 785 mm Operating hours: 3,705 h Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,270 x 3,500 mm Unladen weight: 4,210 kg EQUIPMENT Side shift CE marking Documentation

Condition: used, Compressor, Dürr-Dental 75L Oil-Free Dental Compressor with Refrigerated Dryer, Used Machine Manufacturer: Dürr Dental GmbH Type: 3621 / 14933 Overall dimensions: Bwjdpfey Udfmox Ahmou Width: 700 mm Depth: 550 mm Height: 890 mm Weight: 95 kg Tank capacity: 75 liters (Manufacturer: Silit-Werke) Power: 1.5 kW Intake capacity: 235 liters/minute Maximum operating pressure: 10 bar Speed: 1420 rpm Design: 3-cylinder, single-stage, completely oil-free compressor unit Year of manufacture: 1983 (extremely durable heavy-duty cast iron construction) Power supply: 400 V The special feature of this unit is the factory-installed high-capacity refrigerated dryer / condensing unit (the copper coil tower mounted on the side of the machine), which completely removes moisture from the compressed air. Since it produces 100% oil-free, dry and clean compressed air, it is perfectly suitable for dental clinics, dental laboratories, pharmaceutical/laboratory applications, or even precision industrial equipment (such as CNC machines, laser and plasma cutters), where even minimal moisture or oil vapor could damage the system.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, machine/vehicle number: 216615, turning length: 995 mm, turning diameter over cross slide: 660 mm, turning diameter: 660 mm, spindle motor power: 22 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, milling spindle length: 30 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 35 rpm, feed length X-axis: 580 mm, feed length Y-axis: 160 mm, feed length Z-axis: 1,045 mm, torque: 468 Nm, bar passage: 76 mm, total height: 2,500 mm, total length: 7,000 mm, total width: 2,000 mm, distance table center to spindle nose: 1,234 mm, overall weight: 9,760 kg, spindle diameter: 76 mm, feed force X-axis: 38 N, feed force Y-axis: 26 N, feed force Z-axis: 38 N, Equipment: documentation/manual, rotational speed infinitely variable, MAZAK INTEGREX 200-IV / 200-IVS Chuck size: 8 inches Max. swing diameter: Ø 660 mm Max. machining diameter: Ø 660 mm Max. machining length: 995 mm Max. bar capacity: up to Ø 65 mm Main spindle: Bsdjz A Huhjpfx Ahmewu Spindle speed: 35–5,000 rpm Main spindle motor power: 22 kW Spindle bore diameter: Ø 76 mm Milling spindle: Spindle speed: 15–12,000 rpm Milling spindle motor power: 18.5 kW Max. torque of the milling spindle: 119 Nm Max. milling tool size: Ø 125 × 300 mm Travel ranges: X-axis: 580 mm Z-axis: 1,045 mm Y-axis: 160 mm

Condition: used, Year of construction: 2019, operating hours: 10,745 h, lifting height: 5,730 mm, free lift: 2,040 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, fork width: 710 mm, total height: 2,500 mm, total length: 2,050 mm, total width: 1,280 mm, color: grey, Empty weight: 3.657 kg Lifting capacity: 2.000 kg - Year: 2019 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 511904V00497 - Operating hours: 10745 - Lifting capacity: 2000kg - Lifting height: 5730mm - Overhead clearance: 2500mm - Free lift: 2040mm - Fork length: 1150mm - Maximum fork width: 710mm - Minimum fork width: 290mm Bwedpfx Aoy Dpt Ushmou - Attachment: Fork positioner - Options: Work lights, Half cabin, Joystick, Free-lift - Mast: Triplex - Drive: Electric - Driving direction: 2 Road - Battery information: - └ Brand/Type: 4 PzS 620 - └ Battery year of construction: 2019 - └ Capacity: 620Ah - └ Battery voltage: 48V - Transport dimensions: 2050mm x 1280mm x 2500mm (l x w x h) - Transport weight [kg]: 3657kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Bwodpfok Abwlex Ahmou Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: excellent (used), Year of construction: 2020, operating hours: 19,409 h, functionality: fully functional, number of ink cartridges: 8, color channels: CMYK + Primer + Clear + White + White, number of print heads: 2, resolution (max.): 1,200 dpi, paper width (max.): 2,500 mm, paper height (max.): 1,300 mm, total length: 4,400 mm, total width: 2,450 mm, total height: 1,250 mm, counter reading (black): 3,023, year of last overhaul: 2026, type of input current: three-phase, input current: 16 A, input voltage: 400 V, Mimaki JFX200-2513 UV-LED Flatbed Printer (Model 2020) Professional UV-LED flatbed printer from a single owner – in top condition & serviced annually by a specialist company. For sale is a well-maintained Mimaki JFX200-2513 UV-LED flatbed printer from 2020. The machine comes from a single owner and has only been used in a professional environment. It was exclusively used to print on glass using printing stencils. To guarantee maximum operational reliability and perfect print quality, the system has been serviced annually by the renowned specialist company ESC. All print heads are in good condition (see nozzle test). The last check, including the replacement of wear parts, was carried out by a specialist company in July. Technical data & operating hours (values read from the interface): Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Operating hours (Use Time): 19,409 h Printed length: Print Length: Only 3,023 m, Print Area is currently only 5142m² UV lamps (LED): 2 UV-LED lamps (Note: Extremely long-lasting UV-LED technology) Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Ink configuration & special features: Ink type: Mimaki LUS-120 (Excellent adhesion and flexibility on rigid and flexible media) Color configuration: CMYK + Primer + Clear (Varnish) + White + White Bodpszt Dmrofx Ahmswu Your advantage: The double white configuration provides extremely high opacity and speed when printing undercoat or overcoat. The integrated primer and clear varnish enable smart finishing options (spot varnish/textures) and printing on demanding materials such as glass, metal, or acrylic. Accessories & highlights included in the scope of supply: Including a powerful suction fan (vacuum add-on): Keeps even uneven or lightweight sheet materials perfectly flat on the printing table. Transport securing device available: The original transport securing device for safe shipping is fully available. Location & removal: Easy logistics: The hall has a large roller shutter door, which makes the removal for a specialist shipping company or a service company easy and straightforward on the ground floor. Inspection and test print can be arranged at the location. Price is net, plus VAT. Errors and prior sale reserved. This offer is exclusively aimed at commercial businesses and freelancers.

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Bwsdpfxsihf Tpj Ahmou Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Bwsdpjihf Twjfx Ahmju Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: R22X00F44, overall weight: 41 kg, load capacity: 20 kg, arm reach: 1,418 mm, We offer this like-new FANUC CRX-20iA/L cobot – 20 kg / 1,418 mm – year of manufacture 2022 – collaborative robot. For sale is a FANUC CRX-20iA/L collaborative 6-axis robot manufactured in October 2022. The CRX is ideally suited for flexible automation tasks and is particularly characterized by its 20 kg payload and 1,418 mm reach. Due to its collaborative design, the robot can also be used for modern human-robot workstations, depending on the application and risk assessment. Technical data Manufacturer: FANUC Type: CRX-20iA/L Year of manufacture / Production date: 10/2022 Payload: 20 kg Reach: 1,418 mm Robot weight: 41 kg FANUC type: A05B-1702-B212 Collaborative 6-axis industrial robot Compact design Large reach with high payload The robot is currently mounted on a mobile aluminum profile base, which allows for very flexible use in trials, demonstrations or different production tasks. As can be seen in the pictures, a pneumatic suction gripper/handling unit is currently additionally mounted on the robot. The exact scope of delivery can be agreed upon if desired. Typical applications The FANUC CRX-20iA/L is suitable for, among other things: Pick & Place Machine loading and unloading Palletizing and depalletizing Part handling Assembly tasks Bjdpfezzkghsx Ahmjwu Packaging automation Inspection and measuring tasks Handling of containers, boxes or components Flexible production and automation tasks The CRX is particularly interesting for companies looking for a flexible robotics solution that can be easily integrated into existing processes. Subject to prior sale and errors.

Condition: good (used), Built-in control unit, control cassette, controller, bus controller, bus module, Powerlink -Manufacturer: B&R, Ethernet Powerlink with 8 feed modules -Powerlink: Type X20 BC 0083 Bjdpeubfx Rofx Ahmowu -Feed modules: X20 PS 9400 1x / x20 DI 9371 3x / x20 AO 4632 2x / x20 PS 3300 1x / -Price/Delivery: complete -Dimensions: 140/100/110 mm -Weight: 0.7 kg

Condition: used, Year of construction: 2014, operating hours: 7,007 h, lifting height: 4,850 mm, fuel type: electric, mast type: triplex, battery manufacturer: GNB, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, General information Year of manufacture: 2014 Weights Empty weight: 3.806 kg Battery Battery: 625 Ah, 48 V, Year of manufacture 2014, Brand of battery GNB Functional Lifting capacity: 2.000 kg Maximum passing height: 216 cm Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: triplex = Additional options and accessories = - 3rd valve - Heater = Remarks = = Additional options and accessories = - Pneumatic shaped solids Bjdpoz Iaccsfx Ahmowu - Roof window = More information = Number of valves: 3 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information