Used Dehn Combined Surge Arrester Module for sale (8,451)

Condition: good (used), Combined surge arrester module Blitzductor, Profibus single module, for PLC control, lamp holder -3x: 919670 -3x: 919562 -6x: 919506 Price: complete -Weight: 0.5 kg Gedeb A Nr Hepfx Afuekc

Condition: new, Year of construction: 2009, 3 pcs surge arrester high voltage - ABB, type PEXLIM Q096-XH123H - originally packaged, never used, including surge counters, year o production 2009. Gkjdpfxjy Ipycj Afuec

Condition: used, Lightbus combination input/output module, input/output module, parallel input/output, analog output Gkjdpfx Afeh H Em Ssuoc -Manufacturer: Beckhoff, analog output -Type: M-2400 -Input voltage: 24V DC -Price per piece -Number: 2x available -Dimensions: 270/70/H75 mm -Weight: 1 kg/pc.

Condition: good (used), Lightbus combination input/output module, input/output module, parallel input/output -Manufacturer: Beckhoff, input-output module -Type: M-1400 -Input voltage: 24V DC Gkodpfxsdngwhj Afuoc -Price per piece -Number: 9x available -Dimensions: 270/75/H70 mm -Weight: 1kg/pc.

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg Gsdpfsz Hngmex Afuskc • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, Year of construction: 2001, Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Gkoderixi Nepfx Afujc Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, PLC control -Type: M1400.000 Gkodpeb Uhtlofx Afuoc -Price: per piece -Number: 2x available -Weight: 1 kg

Condition: good (used), Lightbus combined input/output module, input/output module, parallel input/output -Manufacturer: Beckhoff, Input/Output Module -Type: M-1410 001 -Input voltage: 24 V DC Gkjdpfxsh Rpabo Afusc -Quantity: 1 available -Dimensions: 165/75/H70 mm -Weight: 0.7 kg

Condition: good (used), Module converter, Lightbus combined input/output module Godpjb A Shyjfx Afuekc -Type: M2400.041 -digital inputs: 8 -digital outputs: 8 -Quantity: 1 available Price: per piece -Dimensions: 270/75/H70 mm -Weight: 1.2 kg

Condition: good (used), Kistler NC Joining Module with Dual Station/Spindle Unit Kistler NCFH 60 Servo Press with Feed Slide & Spindle Station The Kistler NCFH 60 NC Joining Module is integrated into an industrial dual station/spindle unit for automated series production (e.g., friction welding or precision pressing). The system is characterized by its high precision, integrated force-displacement monitoring (piezoelectric sensors), and an extremely robust design for industrial continuous operation. Gkodpfxezcpnzs Afuoc Precise Pressing and Joining: Ideal for highly accurate assembly processes in the automotive industry, electrical manufacturing, or general mechanical engineering. Integrated Quality Assurance (Force-Displacement Monitoring): Thanks to the built-in piezoelectric sensors, the module measures the exact tensile and compressive forces acting during the pressing process, depending on the position. Flexible Process Control: Enables advanced functions such as "joining on block," position-controlled pressing, or force-controlled joining (in combination with a suitable controller, e.g., Kistler maXYmos). Automated Workpiece Clamping: The attached spindle station features an automated clamping function (pneumatically/hydraulically actuated via integrated cylinders), perfect for automated series production and assembly lines. Stable Machine Bed: The entire mechanism is mounted on a heavy, welded steel frame to withstand the enormous forces (up to 6 tons per side) during operation. Manufacturer of Joining Module: Dr. Staiger Mohilo+Co GmbH / Kistler Group Type: 2151B 60304002 Model: NCFH 60 400 300 B H C G Nominal Force: 60 kN (corresponds to a pressing force of approx. 6 tons) Max. Total Spindle Stroke: 400 mm Max. Traverse Speed: 300 mm/s Motor Type: AC Servo Hollow Shaft Motor (165H-180E) Holding Brake: 18 Nm Certification: CE Marking Scope of Delivery: Kistler NCFH 60 Joining Module including mounted flange coupling, yellow slide/feed guide, complete sensor cabling, and the associated spindle clamping station and the maXYmos process monitoring system. "One-stop shop: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Year of construction: 2007, condition: good (used), Chemagen chemagic Magnetic Separation Module I The chemagic Magnetic Separation Module I (chemagic MSM I) isolates nucleic acids automatically within one hour. Viral RNA from 96 nasal swab samples can be isolated simultaneously. The Chemagen MSM-1 is an automated system for high-throughput isolation of nucleic acids (DNA/RNA). It uses a patented magnetic bead technology, in which magnetizable metal rods are immersed in the process solutions to efficiently collect and redisperse the bound particles. Technical Features & Capacity Throughput: The system is modular and can process 12, 24, or 96 samples simultaneously, depending on the rod head used. Sample volume: It offers high flexibility for volumes from 10 µl to 10 ml. Processing time: 96 samples (small volumes): approx. 15–60 min. 24 samples (medium volumes): approx. 35–60 min. 12 samples (large volumes): approx. 45–60 min. Technology: The particles are resuspended by rotating the metal rods at up to 2,000 rpm, enabling high yield and purity without cross-contamination. System Components & Extensions Automation: The MSM-1 can be integrated into standard liquid handling units and often features a 6-axis industrial robot for fully automatic sample tracking. Software: The system is controlled via the chemagic QA software, which is LIMS-compatible. Applications The device is primarily used in research and diagnostics, including: Biobanking and human genetics HLA typing Detection of viruses and bacteria Extraction from various materials such as whole blood, saliva, serum, or plasma System components Actuators: High-precision linear axes for vertical movement and a rotational axis for mixing Electromagnet: Central unit for controlling the magnetic attraction to the metal rods Interfaces: Integrated PC with screen, keyboard, and barcode scanner for sample tracking Software: chemagic QA software (LIMS-compatible, logging, user management) Special features Gjdoyk Uu Nopfx Afuskc Cross-contamination protection: The use of disposable protective sleeves (tip combs) for the metal rods prevents contact between samples. Automation: Can be combined with the chemagic Dispenser for automated buffer filling or integrated into liquid handling robots (e.g., Hamilton, Tecan). Rod heads: 96 Sampling volume: 10 - 400 μL Number of samples: 1 to 96 samples TFT monitor, keyboard and mouse Year of manufacture: 2007 Dimensions & Construction Base machine (W/D/H): approx. 600 x 640 x 950 mm. Carrier axis (W/D/H): 1940 x 170 x 200 mm (in fully expanded configuration with rail system). Total footprint: A fully configured system can take up to 2000 x 740 x 800 mm (L/W/H). More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Year of construction: 1991, operating hours: 4,950 h, power: 139.74 kW (189.99 HP), color: green, total height: 4,089 mm, total length: 9,728 mm, total width: 4,572 mm, 1991 | John Deere 9500 | Used Combine Harvester | 4,950 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: John Deere combine harvester with a 190 hp diesel engine, 7,164 L grain tank, 17 ft unloading auger, straw chopper, and chaff spreader. Equipped with PRWD, 30.5-32 and 18.4-26 tires, and factory grain bin extension. ✔ PRWD ✔ 30.5-32 tires ✔ 18.4-26 tires ✔ 17 ft unloading auger ✔ Factory grain bin extension ✔ Straw chopper ✔ Chaff spreader ✔ 2 WD live front axle ✔ Conventional walker configuration ✔ Rasp bar cylinder Key specs: Engine power: 190 hp Engine hours: 4,950 hr Operating weight: 9,190 kg (20,260.5 lb) Grain tank capacity: 7,164 L (203.3 bu) Unloading rate: 2.6 bu/sec (90.4 L/sec) Unloading auger length: 17 ft (5.2 m) Fuel tank: 530 L Engine displacement: 7.6 L Combine type: Corn/Bean, Walker (conventional) Dimensions (L × W × H): 9,728 × 4,572 × 4,089 mm What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase Gkodpfx Aoz Ebxysfuoc

Condition: ready for operation (used), Year of construction: 2006, Max. discharge volume: 4000cm³, net hopper volume: 1500cm³, stainless steel construction, corrosion protected, version with memory storage hoppers, circular multihead weighing system operating according to the partial quantity combination principle. Design features: chassis, frame, modules and product contact parts made of V2A, easy cleaning through enclosed design with load cells and vibratory drives integrated into the housing, electrical components integrated into the scale frame. Equipment: central product distributor with vibratory drive, inclination angle 20°, vibratory feed chutes with quick-release fasteners, dosing hoppers with motor-operated opening flaps, each driven by a separate motor, weighing hoppers with double-flap design and motor-operated opening flaps, each driven by a separate motor, all hoppers without flap return springs, storage hoppers arranged below the weighing hoppers to increase performance, line modules consisting of precision strain gauge load cells, hopper actuation system, electronic module for weight signal evaluation, control of the vibratory feed chutes, discharge chutes 55°. Electronics: control system with 32-bit multiprocessor module technology, MultiWeigh touch screen color display, with documentation. An on-site inspection is possible. Gksdpfx Afjzfp Hbjujc

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Gkodpfxez D Ihfo Afuec

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,109 h, power: 372.9 kW (507.00 HP), total height: 4,830 mm, total length: 10,110 mm, total width: 4,170 mm, 2014 | John Deere S680 | Used Combine Harvester | 3,109 hours Location: Illinois, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: Rotary combine harvester with a 507 hp diesel engine, 14,100 L grain tank, 26 ft unloading auger, Pro-Drive transmission, and Sidehill Performance Package. Equipped with a premium cab, 650/85R38 duals, 28LR26 rear tires, factory manual-fold grain bin extension, and GS3 7" touchscreen. ✔ Premium cab ✔ Pro-Drive transmission Gkodpfxez Elm Uj Afujc ✔ 5-speed feederhouse ✔ 650/85R38 duals ✔ 28LR26 rear tires ✔ 2WD ✔ Factory manual-fold grain bin extension ✔ 26 ft unloading auger ✔ Chopper with manual tailboard ✔ HID lights ✔ Round bar concaves ✔ Deep tooth chaffer ✔ GS3 7" touchscreen ✔ Sidehill Performance Package Key specs: Engine power: 507 hp (rated: 473 hp) Engine hours: 3,109 hr Operating weight: 20,750 kg (45,746 lb) Grain tank capacity: 14,100 L (400.1 bu) Unloading rate: 135 L/sec (3.8 bu/sec) Unloading auger length: 6.9 m (22.6 ft) Fuel tank: 1,250 L Engine displacement: 13.5 L Emission standard: Interim Tier 4 Separator type: Rotary Total cleaning area: 5.6 m² Chaffer area: 2.5 m² What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: used, Year of construction: 1990, operating hours: 2,946 h, power: 115 kW (156.36 HP), Equipment: air conditioning, cabin, 662 ----CLAAS DOMINATOR 88 SL HOURS: 2,946 YEAR OF MANUFACTURE: 1990 Godpfxjz R H S Rs Afujkc CUTTER BAR: 3.90 METERS RAPID TABLE TIRES NEW

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 4,260 h, power: 248.6 kW (338.00 HP), color: green, total height: 4,500 mm, total length: 8,500 mm, total width: 3,700 mm, 2011 | John Deere 9670 STS | Used Combine Harvester | 4,260 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: Rotary combine harvester with a 338 hp diesel engine, 10,572 L grain tank, 22.5 ft unloading auger, extended wear round bar concaves, extended separator package, and Sidehill Performance Package. Equipped with duals and a high-torque variable-speed feederhouse drive. ✔ 2WD ✔ 520/85R38 duals ✔ 18.4 x 30 tires ✔ High-torque variable-speed feederhouse drive ✔ Extended wear round bar concaves ✔ Extended separator package ✔ Deep tooth adjustment ✔ 22.5 ft unloading auger ✔ Sidehill Performance Package ✔ Chopper ✔ Duals Key specs: Engine power: 338 hp Engine hours: 4,260 hr Operating weight: 14,815 kg (32,661.5 lb) Grain tank capacity: 10,572 L (300 bu) Unloading rate: 116 L/sec (3.3 bu/sec) Unloading auger length: 6.9 m (22.5 ft) Godpsz Ekpzjfx Afuokc Fuel tank: 946 L Engine displacement: 9.0 L Emission standard: Tier 3 Combine type: Corn/Bean Separator type: Rotary Chaffer area: 1.9 m² Sieve area: 1.6 m² What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: excellent (used), Catalog number: 8125 TECHNICAL DATA PLANER: - roller width 410mm - 3-knife roller - adjustable angle guide - table length 1800mm - both tables adjustable JOINTER: - max thickness of workpiece on the jointer 180mm - guard on the jointer roller – from above: - pawls - infeed roller, toothed - planing roller - outfeed roller, smooth – with horizontal drilling machine: - max tool diameter 16mm - max hole depth 120mm - max milling length 200mm - front/rear adjustment with drilling unit - table adjustment up/down and sideways - adjustable roller in the lower table - 2 feed speed options 8/12m/min - main motor 4kW CIRCULAR SAW: - max blade diameter 350mm - max cutting height (for a 300mm blade) 45mm - blade arbor diameter 30mm - blade adjustable up/down - cutting width with guide 350mm - cutting width on the carriage 500mm Gksdpfjz Rpl Tsx Afujc - table dimensions 1230x530mm - with carriage + miter gauge - blade guard - motor power 3kW MILLING MACHINE: - spindle 30mm - spindle adjustable up/down - spindle height 80mm - guide - rotation right/left - dust extraction nozzle diameter 120mm - dimensions L/W/H 2800x2300x1050mm - weight approximately 1000kg FEATURES – with drilling machine – guard on the jointer roller – very good condition, used machine Net price: 16900 PLN Net price: 3930 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 510 mm, number of blades: 4, overall weight: 430 kg, extraction nozzle diameter: 120 mm, For sale is a used FELDER AD 7-51 surface and thickness planer, manufactured in 1998. This machine impresses with its robust cast iron construction, high precision, and the typical Felder durability. With a planing width of 510 mm, the AD 7-51 is ideal for carpentry workshops, joineries, furniture manufacturing, and professional interior design. The machine is in used condition and offers a powerful combination of surface and thickness planing for daily workshop use. Equipment: • Surface and thickness planer in one machine • Robust industrial design • Precise cast iron guide tables • Self-adjusting planer knives • Powerful 4 kW drive Gkedpfxozwnmqe Afujc • Proven Felder quality machine • Ideal for solid wood and furniture construction • Thicknessing unit with central, electric height adjustment • Feed rate for thicknessing: 6 m/min and 12 m/min • Thicknessing capacity: 4-220 mm • Massive cast iron surface planing tables for vibration-free operation • Planer shaft with 4 system planer knives • Surface planing table length: approx. 2,050 mm

Condition: used, Year of construction: 2019, overall weight: 1,047 kg, Combined Surfacing and Thicknessing Planer Manufacturer: SCM GROUP spa Model: SCM Type: L Invincible FS7 Year of Manufacture: 2019 Weight: 1,047 kg Usable Working Width: 520 mm Total Table Length: 2310 mm Cutterhead Diameter: 120 mm Planerhead Speed: 5000 rpm 4 Knives: 35 x 3 x 520 mm Aluminum Surfacing Fence: 1200 x 190 mm Surfacing Fence Angle Adjustment: from 90° to -45° Min./max. Planing Height: 3 / 250 mm Feed Rate (Thicknessing): 5 - 8 - 12 - 18 m/min Dust Extraction Port Diameter (Surfacing): 120 mm Dust Extraction Port Diameter (Thicknessing): 120 mm Purchase Price (Net): €15,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale. Gkedpfx Afjz Iqqkouec Sale is made without guarantee or warranty and only to commercial customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, Year of construction: 2023, Filter dimensions: 1,220x610mm, air flow rate: 1,550m³/h, cleanroom class: ISO 5 (high-purity working environment), high-efficiency filter: H14 (99.995% filtration efficiency), connected load: 510W, length: 977mm, width: 453mm, height: 374.5mm, weight: 30kg, equipped with EC fan, 8-stage adjustable air flow, regularly maintained, last successfully certified on March 1, 2023, in perfect working condition, ready for immediate operation, no outstanding maintenance, on-site inspection is possible. Gksdez R A N Eepfx Afusc

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Gedpjz Eft Iefx Afuokc Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: used, Year of construction: 2005, - Year of manufacture of the NH cutterbar: 2005 - Year of manufacture of the Biso header: 2007 - 20 ft. Gkjdpjz Na D Asfx Afuec - Hydraulic reel drive - Biso CX 100 rape cutterbar attachment with 2 electric side knives

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE inverter, complete with a power module. Visual condition as shown in the photos. Technical data: Control unit: Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Gedpfszphccjx Afuekc Controller type: MDX61B-00 P/N: 08279691 Control unit P/N: 08243492 SO#: 01.1304473308.0001.09 Control unit SO#: 0189307 Protection class: IP00 Country of manufacture: Germany (Made in Germany) Power module: Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0591425 Input power supply: 3×380–500 V AC ±10% 50–60 Hz ±5% 94.5 A AC (400 V) Operating temperature: 0…40°C Protection class: IP10 Output: 3×0 V 0–180 Hz 105 A AC (400 V) 73.5 kVA Lastart: M Installed communication modules: DFP21B DEH11B Additional markings: SEW Werk Wien service sticker: Rep. No.: 12424 Repair: 12/2011 Final inspection: 42/2011 Weight: 32.75 kg Condition: Visually in good condition. The housing has a crack (visible in the photos). Normal signs of use, minor scratches, and scuffs are visible. Sold exactly as shown in the photos.

Condition: used, Year of construction: 2010, - Corn header attachment - Approximately 3,000 [units/pieces/etc.] - Flange drive - Protective tarpaulins Gedjz Nbcyopfx Afuskc - Parking supports - Auxiliary chassis