Used Demag Ergotech Pro 25-80. for sale (36,201)

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg Tedpfx Aszqam Ajhmec For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475 Tsdpjyguk Aefx Ahmec

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t Todpfx Aezy H S Rehmsc tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) Tsdpszh N Tyjfx Ahmoc delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Todjymqz Rjpfx Ahmec terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2014, Sumitomo Demag Systec 210/580-430 with Sepro Success 22 robot / Hybrid machine Year of manufacture: 2014 Injection unit: Screw diameter: 35 mm Shot weight: 153 g Injection pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Todpfxjzy Imce Ahmsc Clamping force: 210 t Tie bar spacing: 580x580 mm Platen size: 860x860 mm Ejector: hydraulic Clamping unit: toggle Controller: NC5 Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic operation Euromap 67 Robot interface Air valve x 9 Hydraulic needle core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air core pull x 5 Controller with hot runners x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Parallel movements Integrated printer Dimensions: Weight: 8930 kg Length/Width/Height: 6.02x1.76x2.15 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2011, operating hours: 46,000 h, clamping force: 245 kN, screw diameter: 18 mm, Hydraulic injection moulding machine manufactured in 2011. This SUMITOMO SHI DEMAG Systec 25/320-80 features a clamping force of 25 t and a screw diameter of 18 mm. It offers a maximum metering volume of 23 cm³ and a mold height range of 130 mm to 480 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 25/320-80 machine we have for sale. Contact us for further details. Tjdpsz Erxksfx Ahmsc - Max. Specific Injection Pressure: 2868 bar- Max. Metering Volume: 23 cm³- Mold Height: 480 mm- Min. Mold Height: 130 mm- Distance Between Tie Bars: 320 x 320 mm- Centering Hole Diameter (Ejector/Nozzle): 110 mm- Maintenance Group: 1- Core Pull: 1- Operating Hours: 46,000 hrs (Pump)- Pump Drive Power: 17.5 kW- Power Supply: 400 V ±10% / 50 Hz, 3 Ph+N+PE- Cooling Circuit: Open, separated water connection for mold and machine cooling- Cylinder / Screw: Bimetallic cylinder, wear-resistant 18 mm screw with 3-piece non-return valve- Nozzle: Open nozzle M24x1.5, flat radius, 2.0 mm bore- Integrated Sockets: 2 x Schuko 1Ph/230V/10A, 2 x IECEE 3Ph/400V/16A

Condition: good (used), Year of construction: 2001, Demag Ergotech 250/560-840 Euromap size: 2500-840 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (840) Screw diameter: 45 mm L/D ratio: 20 Injection pressure: 2402 bar Stroke volume: 358 cm³ Shot weight (PS): 320 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 80 kN Barrel heating power: 13.0 kW Tjdpfx Asz D Ttgshmoc Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 43 kW (50 kW with electric screw drive) Dry cycle time (EUROMAP 6): System: 2.35 s – 392 mm / 2.25 s – 392 mm; Concept: 2.25 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 10700 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.1 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: excellent (used), Year of construction: 1995, Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Euromap 67 Robot interface Control unit with air valve Hydraulic core pull x 1 Hardened injection unit - bimetal Sprue picker Sepro Industrial Robot 55 Year of construction: 2018 It is possible to purchase a Moretto brand raw material feeding system for an additional charge The set includes: - Screw feeder, volumetric with hopper Tedszy H Ufepfx Ahmoc - Feeder with proportional valve Dimensions: Weight: 3900 kg Length/width/height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heating output: 8.12 kW Total output: 23.12 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Demag DCS-Pro 1 80 1/1 H3 VS30-30 chain hoist / crane SN: 94828902 - load capacity: 80 kg / control cable length: 2.00 m - chain length: 1.40 m, used, in good condition, fully functional, delivery as per photos. Todpfx Ahjx Eq Hlsmsc

Condition: used, Year of construction: 2006, Demag Modular 250/560-1450 Euromap size: 2500-1450 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (1450) Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1400 bar Stroke volume: 1039 cm³ Shot weight (PS): 940 g Max. dosing stroke: 270 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 110 kN Barrel heating power: 27.0 kW Electric screw drive (WA): 30 kW Hopper capacity: 110 l GENERAL Tsdpfxez D Tnqe Ahmec Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 57 kW (64 kW with electric screw drive) Dry cycle time (EUROMAP 6): 2.35 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 11200 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.2 m (length without injection unit overhang) Noise level: 74 dB(A)

Year of construction: 2004, condition: used, Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible. Tsdpjzybu Hsfx Ahmec

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Tjdpfx Ahozy H Tujmsc Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: repair required (used), functionality: fully functional, Demag T12 / KBA125 / FG08 / KBA80 New! T12 i = 24.8 KBA125 B-4 FG08 i = 9.87 KBA80 A-4 Todpfx Aoywk Ershmsc Price on request

Condition: used, Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible. Todpfx Ahez Dkh Uemec

Condition: good (used), Year of construction: 2012, DEMAG crane chain hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with crane canopy (2x3m) The DCM-Pro manulift was developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Due to the control unit being rigidly connected to the load handling attachment, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Tsdpfx Ahehwd E Njmoc Type: Crane chain hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: sideways 3 metres and forwards/backwards 2 metres Steel beam: included in the offer Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2001, condition: used, Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible. Tjdpfx Aszybu Tehmsc

Condition: like new (used), functionality: fully functional, lifting height: 4,000 mm, load capacity: 2,000 kg, DC PRO 25, 2000 kg, 1/1, H4, V 8/2. Lifting height: 4 m. 1/1. Control unit not included. Todezdkcuspfx Ahmsc Condition: used, in excellent condition! Optional: can be converted to a maximum capacity of 5000 kg for an additional charge.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 80400008, clamping force: 2,800 kN, screw diameter: 45 mm, injection weight: 320 g, ejector stroke: 200 mm, opening stroke: 675 mm, Loading the machine is possible for an additional charge of €500! TECHNICAL DETAILS Clamping force: 2,800 kN Number of components: 1 Width of clamping plate: 950 mm Height of clamping plate: 950 mm Free distance between bars, horizontal: 630 mm Free distance between bars, vertical: 630 mm Diameter of centering ring: 160 mm Minimum installation height: 330 mm Maximum installation height: 710 mm Maximum opening stroke: 675 mm Maximum ejector stroke: 200 mm Maximum tool weight: 3,700 kg Maximum tool weight, moving side: 2,500 kg MACHINE DETAILS Thread: M20 Screw diameter: EE1: 45 mm Maximum shot weight PS: EE1: 320 g Unit arrangement: EE1: horizontal Todpfx Aszdiyxjhmjc EQUIPMENT Core pull, 2-fold Cascade, 6-fold Robot Note: The operating hours can be found in the last image.

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Demag, type 80/420-200 System The machine is in good and functional condition ATTENTION: No backup disks available Technical data: Year of manufacture: 2001 Clamping force: 800 kN Tie bar distance V: 420 mm Tie bar distance H: 420 mm Plate size H: 590 mm Plate size V: 600 mm Minimum installation height: 250 mm Maximum plate distance: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Tool weight: 700 kg Screw diameter: 30 mm Tsdpfonfu I Ijx Ahmoc Dimensions: approx. 4.5*1.50*2 m Weight: 4t Transport and loading can be organized Europe-wide at extra cost on request. Prices plus VAT Inspection possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, DEMAG Ergotech System 650/1000-3300 with 6,500 kN clamping force and 3300 Euromap injection unit, equipped with a 2021 Wittmann W843 pro robot featuring servo B axis 270° and servo C axis 180°. The machine delivers 1,600 g shot weight through an 80 mm screw, supported by 4 hydraulic core pulls, 8 cascade circuits, and 16 hot runner zones for complex multi-component and technical moulding. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 6.500 Tie-bar clearance (H x V) mm: 1.000 INJECTION UNIT Injection unit size (Euromap): 3300 Screw diameter mm: 80 Max. shot weight (PS) g: 1.600 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 8 Hot runner control zones: 16 Handling robot (model / year): Wittmann W843 pro (2021) Robot strokes X / Y / Z mm: 1.200 / 2.000 / 3.000 Tedjzz S Uaopfx Ahmjc Robot rotary axes (B / C): C servo 180° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 241 + 108

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 80 mm, clearance between the columns: 1,000 mm, displacement volume: 1,779 cm³, injection pressure: 1,855 bar, injection weight: 1,600 g, mold height (min.): 450 mm, ejector force: 96,000 N, ejector stroke: 300 mm, plate length: 1,450 mm, plate width: 1,350 mm, Clamping force: 650t Year of manufacture: 2005 Injection weight: 1600g Injection unit 3300 Screw diameter: 80 mm Screw L/D ratio: 20 Specific injection pressure: 1855 bar Injection volume: 1779 ccm Injection weight: 1600 g Mold closing system Clamping force: 650 t Mold plate dimensions: 1450 x 1350 mm Tsdpfxjz E Iq As Ahmsc Distance between columns: 1000 x 900 mm Mold height: 450 - 950 mm Opening stroke: 930 mm Maximum plate distance: 1880 mm Ejector force: 96 kN Ejector stroke: 300 mm Control system: NC4 Equipment: - Hydraulic core pulls: 4 - Hydraulic cascades: 8 - Hot runner adjustment points (zones): 16 - Wittmann W 843 Pro robot, year 2021 (Z 3000 / Y 2000 / X 1200 mm, C-axis servo 180°, B-axis servo 270°) included

Condition: used, Year of construction: 2018, Machine no. 55, serial no. 80430240, NC 5 control system, maximum clamping force 2,800 kN, conveying device, manufacturer Colortronic, tool control unit, manufacturer Altanium, handling system, manufacturer Sumitomo Demag, type Industrial Robot, serial no. SDR22S, year of manufacture 2018, maximum load capacity 36 kg, safety fence, conveyor belt, length/width approx. 2,200 x 500 mm. Tedpfx Asz H N Ncjhmsc

Condition: used, Year of construction: 2018, overall weight: 600 kg, load capacity: 10 kg, terms of delivery: FCA Pegnitz delivery time: on request Tjdpfx Ajz Hfl Hehmec terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1999, Technical details: screw size: 45 mm injection shot weight in Polysterol: 149 g/PS closing pressure: 1250 kN Tedpewvkgmofx Ahmjc