Used Demag Kba-112-Mb-6 for sale (51,074)

Condition: used, Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer engine DEMAG type: KBA-112-MB-6 -Manufacturer engine DEMAG type: KBL-71-A4 -Manufacturer gearbox DEMAG type: FG08-B-14-U-0-H1- -Power: 0.3/2.9 kW -Speed: 106/945 rpm -Construction: B14 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 670/300/H500 mm Lajdpecb E Trjfx Aiieb -Weight: 102 kg

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system Lsdpfx Aijrr Ehmoieab - removed from running machine - fully functionalmanufacturer: Demag spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: new, Year of construction: 2025, functionality: fully functional, power: 4.5 kW (6.12 HP), rotational speed (max.): 1,425 rpm, Demag motor KBA112 B4 Condition: New Mounting type: B14 ED = 40% Brake: light / conical 4.5 kW 1425 rpm Lsdpfxoywk N Do Aiioab 50 Hz Price on request

Condition: good (used), Year of construction: 2011, functionality: fully functional, travel distance Z-axis: 1,500 mm, Equipment: documentation/manual, Number of axis: 3 Reach: 1500 mm Payload: 5 kg X=420mm Laodpoyfhw Hjfx Aiieb Y=1200mm Z=1500mm c= 0-90 pneumatic

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor - Output speed via gearbox: 174 rpm Ledpjy N D E Aefx Aiijab Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder Lajdpfxjxzqp Aj Aiisb -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 -Connector: 16-pin -Crane remote control: 2 steps below the switch each -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Condition: used, Year of construction: 2001, The KBA RAPIDA 162A 6+lak PWVA ALV3, manufactured in 2001, is currently dismantled and located in Germany. With a format of 1200 x 1620 mm and a print count of 258 million, this machine is equipped with a range of features including Densitronic S for density and spectral measurements, an Anilox Coater with a chambered doctor blade and UV coating, extended delivery, a semi-automatic plate changing system, and the capability to use hybrid conventional or hybrid inks. It also includes manuals and tools, automatic roller washers, WEKO powder spray, non-stop feeder and delivery, a TRESU coating supply and cleaning device, an ultrasonic double sheet detector, circumferential and diagonal remote register control, automatic blanket washers, wash and print functionality, antistatic features, a Remote Ergotronic with Colortronic Console, an air cleaning system, an Eltosch Dryer with two UV dryers and three interdecks, IR/UV in delivery, ACR Autoregister, a Varidamp Alcohol Dampening System, automatic ink roller washers, Baldwin refrigeration and recirculation, and ink temperature control. The delivery terms are FCA. Format: 1200 x 1620 mm Equipment: Semi-automatic plate changing system Non-stop feeder and delivery Remote Ergotronic w/ Colortronic Console Circumferential & Diagonal Remote Register Control Hybrid Conventional or Hybrid Inks Ultrasonic Double sheet Detector Varidamp Alcohol Dampening System Baldwin Refrigeration & Recirculation Automatic blanket washers Automatic roller washers Ljdjvfx Ewjpfx Aiioab Automatic Ink Roller Washers Densitronic S (Density & Spectral) Ink Temperature Control Anilox Coater w/ Chambered Doctor Blade & UV Coating TRESU Coating Supply & Cleaning Device Eltosch Dryer (2 UV Dryers with 3 Interdecks, IR/UV in Delivery) Wash & Print Extended delivery Air cleaning system Anti-static device WEKO Powder Spray ACR Autoregister Manuals & Tools

Condition: excellent (used), functionality: fully functional, 15 new DEMAG crane travel motors / crane motors, some with gearboxes Ljdpfxsv Uvuhe Aiioab KBF / KBA 71 80 90 100 112 125 140 160 Very good used and tested condition Well below manufacturer's retail price Info: We have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts in our warehouse! Check out my other offers from my inventory!

Condition: new, Year of construction: 2020, functionality: fully functional, power: 2.2 kW (2.99 HP), rotational speed (max.): 2,700 rpm, Demag motor/gearbox KBA 100 A -12/2 ED = 15/40% 0.21 / 2.2 kW 425 / 2700 rpm Lajdpfx Ajywkq Ujiiob Gearbox DO8 i = 3.24 Shaft diameter: 50 mm Condition: as good as new Price on request

Year of construction: 1988, condition: excellent (used), machine/vehicle number: TRHE, 1 Demag wall jib crane 250 KG payload / lifting capacity 5 units available, lengths 1x5 - 1x5.8 - 1x6 - 2x7m Price from 1950 for a 5m crane, 250Kg payload Lsdsmqf I Espfx Aiijab with steel chain hoist payload 250 + 500Kg Weight including wall bracket approx. 350 Kg Complete with wall brackets, boom, chain hoist, cable drag, chassis and small parts Swivel range 270° Item location is 75053 Gondelsheim System is completely dismantled and immediately available See pictures Used condition Shipping by freight forwarder or collection Please enquire about shipping costs according to postcode

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable Laedpfx Asxzq Rajiieb -Type: DST 3 -Connector: 6-core cable -Transport dimensions: 520/240/H140 mm -Weight: 2.1 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder Laedpoxzq Hzsfx Aiisb -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 3 -Connector: 6-core cable -Transport dimensions: 480/300/H130 mm -Weight: 2.1 kg

Condition: used, mileage: 214,535 km, power: 245 kW (333.11 HP), first registration: 04/1985, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: mechanical, Very well-maintained suction and jetting combination unit from the Swiss manufacturer Kaiser. - Scania 112 6x4, first registration: 02/1985, mileage: 214,000 km - Kaiser Kanal Jet Combi - Kaiser M13 vacuum pump - KDU 300 high-pressure pump - Partition wall - Kaiser suction boom - Hose reel 120 m, 1" - Manual hose reel Ledjw Ik Duepfx Aiieab Financing options available through our partner banks. We are happy to assist you further. Please note: We expressly reserve the right to prior sale, as this item is also advertised on other platforms. Accessory details provided without guarantee. Subject to change, prior sale, or errors. We explicitly recommend and encourage inspection and testing so that the buyer has a clear understanding of the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.

Year of construction: 2008, condition: used, Year: 2008 Condition: Funkcional, dismontled in the warehouse Six-colour sheetfed offset press with coating tower including chambre coater (L) extended unloader (ALV) and carton equipment up to 1,2 mm Technical parameters: - Maximum sheet format: 740x1050 mm - Minimum printing format: 350x500 mm - Maximum speed: 15 000 sheets / hour - Usable materials: cca.60g/m^2 max 1,2mm - High of the stock: - loader 1300 mmm - unloader: 1200 mm - Double diameter impressions and transfer system Basic specification: Loader equipment: - Drive Tronic loader - Sheet splitting with 4 lifting and 6 transporting suction cups (2 of which are long jump suction cups) - Format presetting from the Ergo Tronic controle panel Loading equiment: Lodpfx Asy H Hgdsiioab - Pneumatic traction pads with automatic format adjustment via menu from the Ergo Tronic controle panel Print unit equipment: - Automated plate changing (SAPC) Color wheel equipment: - Color Tronic tinting with 35 zonal blades, each 30mm wide Interpreter equipment: - Powder device WEKO AP 130 Gallery at the machine: - Ergonomic gallery on the device and oparator side Machine equiped: - Equipment for printing cardboard up to 1,2 mm o Manual skid steed loader o Equipment for carton management in printing units o Monitoring the pasage of sheets o Roll down roller shutter for stop-free unloading - Extended unloader / delivery 2600 mm - Full automatic plate changing with pneulatic plate bending device - Machine elevation by 375 mm - ACR Controle(automatic Register) - Connection to the existing Logotronic basic systém (CIP 3) - Connection to the existing Densitronic S console - Color zone status and measured values for Densotronic - Baldwin blankets and impression cylinders washing devices - Combined cooling / temperature controle - Baldwin unit - Grafix dusting with iuonization and connection to the controle panel - Infrared and hot air dryers in delivery

Condition: used, KAMRO thickness planer Model MB 6 Motor 5.5 HP / 400 Volt 2-knife cutterhead (strip knives) Planing width 630 mm Planing height approx. 200 mm Lsdpjypbf Eofx Aiijab Feed speed 9 and 18 m/min 2 table rollers Knife setting gauge Weight approx. 1000 kg

Condition: used, Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KR 112, 2/6./S -Power: 2.2kW -Speed: 940 rpm -Shaft: Ø 28 x 60 mm -Protection class: IP44 Lsdpfx Ajibd S Heiioab -Dimensions: 390/230/H255 mm -Weight: 41 kg

Condition: good (used), hydraulic pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: Plessey, hydraulic pump type A096X Ljdpfx Ajmxpuheiijab -Electric motor: EMI Type D 112/2R-6/8 24 Volt / 2 kW -Dimensions: 290/115/H130 mm -Weight: 10 kg

Condition: good (used), Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.25 kW -Design: B5 -Shaft: Ø 25 x 60 mm -Bolt circle: 130 mm -Recess: 110 mm -Protection class: IP 55 -Dimensions: 400/160/H220 mm -Weight: 17 kg Lajdpfodwkymjx Aiijb

Condition: good (used), Herzog Heymann KL112-6 Pharmaceutical Folding Machine Made in Germany. The world’s highest-class folding machine. Production-ready machine. Infinitely variable feed and folding speed adjustment. 6-cassette module. Elevator feeding (high stack) Additional vacuum head (tremat) Stack delivery. The machine is ideal for folding pharmaceutical leaflets thanks to its low fold and large number of cassettes. Cassette soundproofing. Electronic counter with a batching function and adjustable time between batches. Technical specifications: Maximum format: 350x500mm Weight: 350kg Lasdey Tu Nyepfx Aiiob 380V power supply

Condition: used, Suspension crane runway Crane system made of aluminum system profile similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA No DEMAG but similar to KBK Overhead monorail system with single girder crane bridge Light crane system made of aluminum system profiles Load capacity: 125 kg Span: 3.2 meters as single girder bridge Profile height: 155 mm Profile width: 100 mm - Natural anodized aluminium profiles - Carriage with smooth-running plastic rollers - Power supply via trailing cable on the wire rope Consisting of: 2 pieces of 4.8 meter aluminum system profile for the longitudinal track with 3 suspension eyelets each 1 piece of 3.35 meter aluminum system profile for the crossbeam (single girder bridge) with 2 suspension eyelets 1 trolley for crane suspension on the crossbeam 1 carriage on the longitudinal beams (2 pieces) 6 end covers suitable for the profile rails Weight of profile rails: 125 kg Very good condition, as good as new Hoists can be found in our WebShop under the search term "chain hoist" Lasdpfx Aisuch Rfeisb You can find suitable assembly material in our WebShop under the search term "KBK"

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Ljdpsxhfuajfx Aiijab Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 6,000 h, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 771 g, Electrical injection moulding machine manufactured in 2023. This SUMITOMO SHI DEMAG IntElect2 S 220/660-1400 features a clamping force of 2,200 kN and a maximum mold opening stroke of 550 mm. The machine offers a daylight between platens of 1,150 mm and an injection unit size of 1400. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 S 220/660-1400 machine we have for sale. Contact us for further details. Lsdpfx Aisy Tv Iwjisab • Distance between tie bars (H x V): 660 x 660 mm • Mold platen size (H x V): 920 x 920 mm • Mold opening stroke (max): 550 mm • Daylight between platens (max): 1,150 mm • Mold height (min–max): 300–600 mm (optional: 300–800 mm) • Ejector stroke: 160 mm • Ejector force: 55 kN • Injection unit size: 1400 • Screw diameter options: 50 / 60 / 70 mm • Injection stroke: 220 mm • Calculated stroke volume: 432 / 622 / 847 cm³ (with 50 / 60 / 70 mm screw) • Max. shot weight (PS): 393 / 566 / 771 g (with 50 / 60 / 70 mm screw) • Max. injection pressure: 2,420 / 2,000 / 1,470 bar (with 50 / 60 / 70 mm screw) • Injection speed (max): up to 350 mm/s (high-performance S-drive specification) • Drive concept: All-electric with proprietary direct-drive technology • Core pull interfaces: 2 (hydraulic/electric options)

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, Sumitomo DEMAG Systec 120/470-600 NC 5 Year of manufacture: 2007 Control system: NC 5 Screw diameter: 45mm Injection volume: 323ccm / 294g Clamping force: 1200KN Tie-bar spacing: 470mm x 470mm Lajdpfjy Tcu Djx Aiieb Minimum mould height: 150mm Maximum plate spacing: 850mm (900 / 950 with WA) Opening stroke: 800mm Ejector stroke: 180mm The machine is currently being overhauled and tested for functionality.

Year of construction: 2009, condition: ready for operation (used), Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous sound pressure level: 74dB(A), length: 5700mm, width: 1700mm, height: 2200mm, weight: 11t, operating hours according to PLC: 36,734h, barrel heating: 25,665h, pump: 18,222h, documentation available. An on-site inspection is possible. A Wittmann robotic cell is also optionally available. Laodpfx Ajy Tx Rbeiisb

Condition: used, Year of construction: 2003, clamping force: 150 kN, displacement volume: 399 cm³, injection pressure: 1,598 bar, overall weight: 7,500 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) Lajdpfsy T Sm Njx Aiiob delivery time: on request terms of payment: 100% prior to delivery