Used Demmeler 2 To Ergonomix M 2000 3 Axis for sale (120,935)

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, foot remote control, Demmeler Ergonomix M-2000 with original set of 2 perforated plates, 2.4 m x 1.2 m, plus octagonal 3D table top, 1.1 m, with 28 mm holes Todsz Hvy Uepfx Ahmsc Plasma nitrided Almost unused, like new, in top condition Complete with accessories and technical documentation Thanks to the sophisticated arrangement of the entire mechanism, Demmeler’s developers have succeeded in creating an unbeatable large working area while maintaining a small footprint for the Demmeler Ergonomix® M manipulator. The manipulator always positions the heaviest loads in the ideal location. A special feature of the Demmeler Ergonomix® M product family is the large swivel range up to 180°. This provides a decisive advantage for many workpieces, allowing them to be completely machined in a single setup without additional rotation. Load capacity 2000 Model M2000 A = min 490 B = max 970 C = max 1480 D = max 1000 Torque 1250 Tilt angle 180° Tilt moment 8000

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment (virtually silent) Excellent condition (like new) Minimum height: approx. 486 mm (tilting axis 0° horizontal) Maximum height: approx. 1438 mm (tilting axis 0° horizontal) Minimum height: approx. 525 mm (tilting axis vertical) Maximum height: approx. 1477 mm (tilting axis vertical) Lower arm length 1500 mm (radius) Upper arm length 1900 mm (radius) Tsdpfxsyupl De Ahmsc Connection: 16 A plug Overall height 3250 mm Rotational speed approx. 0.2 - 2.0 rpm Torque 24000 Nm Lifting speed 1.5 m/min Handheld remote control

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Equipment: foot remote control, Demmeler Ergonomix M-2000 Perforated Plate, original 1.0m, diagonal 1.1m, 28mm holes Almost unused, like new, top condition Thanks to the ingenious arrangement of the entire mechanism, the developers at Demmeler have succeeded in creating an unbeatable large working area while maintaining a compact footprint for the Demmeler Ergonomix®M manipulator. The manipulator always brings maximum loads into the ideal position. A special feature of the Demmeler Ergonomix®M product family is the wide swivel range of up to 180°. This provides a decisive advantage for many workpieces, allowing them to be fully machined in one clamping setup without the need for additional repositioning. Payload 2000 kg Model M2000 A = min 490 mm B = max 970 mm C = max 1480 mm D = max 1000 mm Torque 1250 Nm Tedsy Hl N Depfx Ahmec Tilt Angle 180° Tilting Moment 8000 Nm

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment Excellent condition Height min: 1050 mm Height max: 2200 mm Total height: 3250 mm Rotational speed: 0.2 - 1.0 rpm Torque: 24,000 Nm Lifting speed: 1.5 m/min Todeytgu Tspfx Ahmoc Handheld remote control

Condition: used, Year of construction: 2004, functionality: fully functional, The machine is used, but in good condition. It can be inspected while in operation. Tjdozp Ik Tjpfx Ahmec

Condition: used, functionality: fully functional, total length: 2,400 mm, total width: 1,200 mm, Demmeler 3D welding/clamping table for sale. Main item: - Manufacturer: Demmeler - Type: 3D welding/clamping table - Approximate table size: 2400 x 1200 mm - Used condition - Condition and completeness are shown in the photos. Additional welding tables are also available and can be purchased separately or as a package: - Siegmund 3D welding table 2400 x 1200 mm – EUR 4,900 - Siegmund welding table 1500 x 1000 mm – EUR 2,200 - Siegmund welding/clamping table 1000 x 500 mm – EUR 800 Package price for all 4 welding tables: EUR 11,900 EXW Estonia. Used equipment, sold as is. Tedpfx Ajzv N Nwshmoc Individual sale or package sale can be discussed. Loading: Forklift/pallet handling capability is available on site. We can load the tables onto the buyer’s truck. Transport: Transport is at the buyer’s expense.

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 350-2000 AX / Electric Machine / Production line with the Krauss Maffei LRX150-1018 robot Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm Shot weight: 720 g Injection pressure: 2420 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 810x730 mm Mold size: 1110x1030 mm Ejector: electric Clamping unit: toggle Control system: MC6 - Touchscreen Additional equipment: Electric machine: energy-saving and very quiet Euromap 67 Robot interface Air core puller x 2 on the side of the fixed mold platen Hydraulic core puller x 3 on the side of the moving mold platen Control system with hot runner system x 10 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Tedpfx Ahezy Ipkemoc Parallel movements Automatic tool height adjustment Robot Krauss Maffei LRX150-1018 Year of manufacture: 2011 5-axis robot: 4 axes are driven by servo motors (electric): X, Y-telescopic, Z, B-rotation; Axis C – pneumatic Travel distances in axes: X-900, Y-1800, Z-2500 Safety package for robot Robot with adapter, conveyor belt and protective housing Purchase of the robot and the conveyor belt at an additional cost Dimensions: Weight: 22600 kg Length/Width/Height: 8.00x2.35x2.30 m All machines offered will be started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2004, Machine is good working condition. Todpfxsyufn Ij Ahmsc Control unit Heidenhain TNC 530 Parts shown by hand not come.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, table width: 850 mm, table length: 2,200 mm, table load: 4,800 kg, spindle speed (min.): 10,000 rpm, distance table to spindle center: 950 mm, Equipment: chip conveyor, documentation/manual, Johnford VMC 2000 vertical machining center, CNC Heidenhain iTNC 530. X-axis – Longitudinal 2,050 mm Y-axis – Transverse 850 mm Z-axis – Vertical 800 mm Spindle-to-table distance 150-950 mm Main spindle to column distance 885 mm Table Surface 2,200x850 mm Maximum weight 4,800 kg Spindle Head Spindle taper - BT-40 (BIG PLUS System) Speed range (2) 10,000 rpm Motor HP 25 Equipped with: - Internal coolant system 20 bar - Part probe - Tool probe - Rigid tapping - Electronic handwheel - 2 longitudinal chip conveyors Tedpfxoxdiigo Ahmsc - Separate tank with filtration unit - Full enclosure

Condition: excellent (used), For sale: Professional lifting set: DEMAG chain hoist + VETTER travelling beam – complete kit High-quality German-made equipment, designed for industrial use. TECHNICAL DATA: Lifting capacity: 2000 kg (2 tons) Beam length: approx. 242 cm Hoist manufacturer: DEMAG Beam manufacturer: VETTER Fördertechnik Power supply: 400V, 3 phases, 50 Hz Year of manufacture: 1997 Lifting speeds: 2-speed (slow + fast) Control: pendant remote (up/down + STOP) Chain: original, in good condition Trolley: manual (moves along the beam) DEMAG hoists are known for their industrial durability and reliability. SET INCLUDES: ✔ DEMAG chain hoist ✔ VETTER travelling beam (approx. 2.4 m) ✔ Manual trolley ✔ Control pendant (remote) ✔ Wiring ✔ Safety hook Tjdpoy A Tgcofx Ahmjc TECHNICAL CONDITION: unit in working order normal signs of use ready for operation without additional investment APPLICATIONS: workshops warehouses production halls service stations assembly work

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Very well-maintained plate shear from Arboga. Type: MSS 2000-30S Todpeza U Injfx Ahmjc Capacity: 2025 x 3 mm Adjustable back gauge Return to sender Rear safety guard

Condition: good (used), Year of construction: 2014, functionality: fully functional, SYNCROMILL C21-63 OPERATING RANGES Table 1600 mm X 800 mm Travel (X/Y/Z): 700 / 1,000 / 800 mm FEED AXES Speed (X/Y/Z): 75 / 75 / 105 m/min Acceleration (X/Y/Z): 11 / 11 / 17 m/s² MACHINING SPINDLES No. of spindles: 2 Spindle spacing: 700 mm Power S1/100%: 26 kW Torque S1/100%: 60 Nm Power S6/40%: 35 kW Torque S6/40%: 80 Nm Max. speed: 17,500 Rpm TOOL INTERFACE HSK 63 TOOL MAGAZINE Chip-to-chip time (VDI 2852): 2.9 s Tool positions: 56 Tools atc Tool length: 530 mm Weight: 9 kg Diameter with fully occupied magazine: 85 mm Diameter with empty positions: 175 mm CONTROLLER / INSTALLATION Siemens 840D SL A-axis: ±180° B-axis: 360° Cooling Blum Touch Probe Rotary table 350 MM Todpfx Asvxpuishmsc Xtra Spindle for heavy works Input power: 95 kVA Installation dimensions (L/W/H): 4.6 / 3.4 / 3.2 m Weight: 25,000 kg Additional Equipment Included: 1 x Rotary Table for advanced multi-axis machining 1 x Touch Probe for precise measurement and quality control 1 x Extra Spindle (ready-to-install for maximum uptime) Ready For Delivery. Increased productivity with two spindles operating simultaneously High flexibility for complex parts and multi-side machining Equipped with additional accessories to maximize machine versatility and reduce downtime

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Tjdpfx Aeq Atxyehmsc Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Coolant system Lighting Interlocked guarding  

Condition: used, Year of construction: 2022, Sanding machine Manufacturer: SCM Type: DMC System / E83 2000 Year of manufacture: 2022 Technical data Position 1 RC 250-2620 working unit for rollers with a diameter of 250 mm - RA-250 steel grooved roller - Time-controlled oscillating blower for cleaning the sanding belt - Motor with 22 kW - PR-E pressure unit with 2 rubber-coated rollers at the inlet of the unit Position 2 TIE-5000 working unit for internal, adjustable cross sliding shoe - PE 32T PWM3 electronic segmented shoe EPICS pitch 32 mm with PWM3 - Motorized rotary blower - Inverter-controlled motor, power up to 15 kW Position 3 SC-2620 working unit for superfinish sliding shoe - PE 32/C PWM3 electronic segmented shoe EPICS pitch 32 mm with PWM3 - Time-controlled oscillating blower for cleaning the sanding belt - Inverter-controlled motor, power up to 15 kW Position 4 BSH 250 working unit for textured roller with a diameter of 250 mm - STY 250 brush roller with a diameter of 250 mm with Tynex bristles with a diameter of 1.27 mm - Pneumatic on/off switching of the brush roller - Inverter-controlled motor with 11 kW At the outlet SP/U 200 working unit at the outlet for cleaning rollers, diameter 250 mm - SPC 200 brush roller with a diameter of 200 mm - Motor with 1.1 kW - Time-controlled rotary blower for workpiece cleaning at the outlet of the brush unit Tjdpfez E Uxtex Ahmsc Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: excellent (used), Year of construction: 2010, total height: 3,300 mm, total length: 5,600 mm, total width: 4,300 mm, table load: 2,000 kg, overall weight: 10,500 kg, Spindle SK 40 Speeds 8000 Rpm with 165 Nm Workload 2000 Kg ATC 56 Positions Hours spindle 10.304 Closed housing with automatic top door IKZ Coolant system LTA Air Cleaning Tjdpfoyh U E Hox Ahmoc Length:5600mm Width:4300mm Height:3300mm Weight:10500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2018, operating hours: 971 h, fuel type: diesel, MOFFETT Forklift Truck, Model M4 - 20.1 2 units in stock!! • Year of manufacture: 12/2018 • Lifting and carrying capacity: 2,000 kg at a load center of 600 mm • Unladen weight: 1,880 kg • Kubota diesel engine, 19 HP, with emission stage V according to EU standards • Hydrostatic transmission with anti-stall system Tedpfx Ahezy D Dwjmoc • Rotating beacon • Duplex mast with roller bearings • Lifting height: 3,040 mm • Side shifter • Extension to 2,750 mm • Fork adjustment • Fixed wheel arms • Tire dimension: 23 x 8.50-10 • Synthetic leather driver's seat • Lap belt • Driver protection structure / protective roof according to ROPS and FOPS • LED road lighting in accordance with STVO (German Road Traffic Regulations) • Chain holder with retaining chains - New safety inspection! - First owner - German forklift Subject to errors and prior sale = Further information = Year of manufacture: 2018

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Tjdpfxeq Ulh He Ahmjc Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: excellent (used), functionality: fully functional, load capacity: 1,250 kg, 3-axis welding positioner, height-adjustable 1250 kg load capacity Very good condition Includes accessories: hand-held and foot-operated remote control See video. Tedpfxjzk Rbqe Ahmec

Condition: used, Year of construction: 2017, load capacity: 2,000 kg, fuel type: diesel, Equipment: head guard, * Telescopic forks Todpoz Aw H Dsfx Ahmoc * 2,000 kg load capacity

Condition: good (used), CORIMPEX BEAM WELDING MACHINE TYPE BWM TC 2000-1000 3-15 machine. Tjdszc Rl Uopfx Ahmjc WEB : Height 200 -:- 2000mm (flanges included). Thickness 5 -:- 25mm FLANGE : Width 150 -1000mm Thickness 8-40mm Max. post-deforming thickness = 35 mm on 1000 mm flange width MAX. BEAM WEIGHT : 1000 Kg / metre MIN. BEAM LENGTH : 3000 mm MAX. BEAM LENGTH : 15.000 mm. HYDRAULIC CYLINDER : 1800 mm. TACK-WELDING : Not needed. POWERED ROLLS IN THE : speed = 12 m/min. ENTRY/EXIT CONVEYORS PISTON WORKING : 6/9 Tons. TRAVEL SPEED RANGE : 0,2 -:- 2,1 m/min WELDING PROCESS : submerged Arc Tandem.

Condition: excellent (used), functionality: fully functional, load capacity: 3,500 kg, 3-axis ESAB welding positioner, 3500 kg load capacity in very good condition complete with accessories, including foot and hand-held remote control Clamping plate diameter 1100 mm Tjdpfx Ahszk Rbdemsc

Condition: used, mileage: 431 km, power: 184 kW (250.17 HP), first registration: 03/2026, overall weight: 17,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 03/2027, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New M.A.N. TG3 17.5 to 4x4 all-wheel-drive special roll-off tipper with initial registration in 03/2026 Payload 9.3 tons, container lengths from approx. 4.0 meters to approx. 5.50 meters, wheelbase 4.50 m, all-wheel drive 4x4 with 3 differentials, single tires, high-roof design, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer hitch, and more. With MAN manufacturer's warranty Equipment: Cab: TN double cab with 3 seats High-roof design Wheelbase 4,500 mm Single tires Engine: MAN D0836 LFLBN with 250 hp Euro 6 e Drive: 4x4 Differential lock in front and rear axles Unladen weight 8,135 kg Payload 9,365 kg with a gross vehicle weight of 17,500 kg Roll-off tipper: Hiab XR 10 S Container lengths from approx. 4.00 m to approx. 5.50 m Hydraulically extendable rear underrun protection Hydraulic internal locking Hook height 1.57 m Roll-off tipper control unit with cable extension 2 additional frame tipper supports 2-stage control for extending and retracting Transfer case MAN G102 with on-road and off-road gears Transfer case lock management electronically (VSM) MAN PowerMatic 08.13 OD automatic transmission Auxiliary drive OPN0L Medium Duty ISO 21308 Transmission function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency Driving program MAN TipMatic Offroad Driving program MAN TipMatic Emergency Air conditioning Water auxiliary heater, 4 kW Trailer hitch, drawbar coupling Ringfeder Type RF40/G150B with air pressure connections Permissible gross train weight 28,000 kg Trailer load 16,845 kg Trailer load, center axle trailer 16,000 kg Front and rear axles leaf-sprung Front axle 9,000 kg as an external planetary axle, switchable, with differential lock Rear axle HP-1333, 13,000 kg, single tires on rear axle, with differential lock Axle ratio, i=6.00 Stabilizer for front and rear axles Shock absorbers on front and rear axles Electronic braking system EBS High-performance engine brake MAN EVBec Hill start assist MAN EasyStart Drum brakes on front and rear axles ASR ESP ABS Emergency braking assistant EBA Front detection Tire pressure monitoring system (TPM) with tire temperature display Driver attention alert MAN AttentionGuard Preparation for alcohol interlock Cruise control Multi-function steering wheel 150 liter fuel tank Roof hatch Daytime running lights LED Rear lights LED Stone chip protection for front headlights Electrically adjustable and heated exterior mirrors Todpsz D N Uasfx Ahmoc Driver comfort seat package Premium air-suspended, co-driver comfort seat package Plus Driver comfort seat air-suspended with lumbar support and shoulder adjustment Comfort center seat air-suspended with integrated seat belt system, offset to the rear Co-driver comfort seat air-suspended New vehicle with initial registration in 03/2026 with MAN manufacturer's warranty Price NET, plus 19% VAT. We will be happy to provide you with attractive financing offers. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2562

Condition: used, mileage: 431 km, power: 184 kW (250.17 HP), first registration: 03/2026, overall weight: 17,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 03/2027, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New M.A.N. TG3 17.5 to 4x4 all-wheel-drive special roll-off tipper with initial registration in 03/2026 Payload 9.3 tons, container lengths from approx. 4.0 meters to approx. 5.50 meters, wheelbase 4.50 m, all-wheel drive 4x4 with 3 differentials, single tires, high-roof design, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer hitch, and more. With MAN manufacturer's warranty Equipment: Cab: TN double cab with 3 seats High-roof design Wheelbase 4,500 mm Single tires Engine: MAN D0836 LFLBN with 250 hp Euro 6 e Drive: 4x4 Differential lock in front and rear axles Unladen weight 8,135 kg Payload 9,365 kg with a gross vehicle weight of 17,500 kg Roll-off tipper: Hiab XR 10 S Container lengths from approx. 4.00 m to approx. 5.50 m Hydraulically extendable rear underrun protection Hydraulic internal locking Hook height 1.57 m Roll-off tipper control unit with cable extension 2 additional frame tipper supports 2-stage control for extending and retracting Transfer case MAN G102 with on-road and off-road gears Transfer case lock management electronically (VSM) MAN PowerMatic 08.13 OD automatic transmission Auxiliary drive OPN0L Medium Duty ISO 21308 Transmission function MAN Idle Speed Driving Driving program MAN TipMatic Efficiency Driving program MAN TipMatic Offroad Driving program MAN TipMatic Emergency Air conditioning Water auxiliary heater, 4 kW Trailer hitch, drawbar coupling Ringfeder Type RF40/G150B with air pressure connections Permissible gross train weight 28,000 kg Trailer load 16,845 kg Trailer load, center axle trailer 16,000 kg Front and rear axles leaf-sprung Front axle 9,000 kg as an external planetary axle, switchable, with differential lock Rear axle HP-1333, 13,000 kg, single tires on rear axle, with differential lock Axle ratio, i=6.00 Stabilizer for front and rear axles Shock absorbers on front and rear axles Electronic braking system EBS High-performance engine brake MAN EVBec Hill start assist MAN EasyStart Drum brakes on front and rear axles ASR ESP ABS Emergency braking assistant EBA Front detection Tire pressure monitoring system (TPM) with tire temperature display Driver attention alert MAN AttentionGuard Preparation for alcohol interlock Cruise control Multi-function steering wheel 150 liter fuel tank Roof hatch Daytime running lights LED Rear lights LED Stone chip protection for front headlights Electrically adjustable and heated exterior mirrors Driver comfort seat package Premium air-suspended, co-driver comfort seat package Plus Driver comfort seat air-suspended with lumbar support and shoulder adjustment Comfort center seat air-suspended with integrated seat belt system, offset to the rear Tsdpfjz D N Ugex Ahmec Co-driver comfort seat air-suspended New vehicle with initial registration in 03/2026 with MAN manufacturer's warranty Price NET, plus 19% VAT. We will be happy to provide you with attractive financing offers. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2562

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: D-MS360, load capacity: 2,000 kg, working height: 3,000 mm, Abus 2000 kg column-slewing crane DC-Pro 2/1 H5 chain hoist - Outreach: 6 m - Lifting capacity: 2,000 kg - Lifting height: 3 m - Year of manufacture: 2007 Delivery, customisation, installation, inspection and commissioning are all possible upon request. Tsdpjz Dtc Uefx Ahmoc Is this crane not exactly what you are looking for? We have more than 100 cranes and over 3,000 m² of parts in stock. Not all stock is listed online. Please call or email if you have any questions. We sell, among other things: - overhead cranes - underslung cranes - column and slewing cranes - chain hoists - Demag KBK rails and accessories - travelling carriages Keywords: overhead crane, gantry crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: used, fuel type: diesel, Lifting mast, forklift mast, forklift mast, mast, rear stacker -Triplex mast: with free lift -Load capacity: approx. 2000 kg -Lifting height: approx. 3300 mm -Forklift shield: mm -Recording/Dimensions: see photos/techn. drawing -Number: 1x mast available -Price per piece Tedpfxohp A Iye Ahmec -Dimension retracted: 2070/1190/290 mm -Weight: 580 kg/pc.