Used Deutronic Vas 5908 for sale (600)

Condition: new, Vehicle Charging Computer VAS 5908 – Battery Charger Charging computer for vehicle starter batteries (lead-acid, gel, AGM, fleece batteries) VAS 5908 battery charger / external power supply with MPC4 control board and nominal 14VDC charging voltage (suitable for 12VDC vehicle electrical systems / batteries) - 100% compatible with vehicle electrical systems, protects the onboard electronics / airbag - Can be used as a battery charger, external power supply, and for vehicle power supply in buffer mode (support during diagnostics / programming) - Extensive protection and self-protection functions - Short-circuit and reverse polarity protection - Protection function in case of battery defects - Safe spark suppression - User-friendly menu navigation / charging parameters can be configured - Integrated communication interface - Sealed housing, protected against internal contamination Housing version 'B': advantageous for industrial production lines - Status display via display and high-power LEDs - Menu languages: German, English, French, Italian, Spanish - Extensive accessories, e.g., external status indicator (DBL-SIG-LR remote indicator), Hjdpjv Hptzjfx Akrjnu power / charging cable, wall mounting device, etc. - Option: Customer-specific charging parameters - Option: Low-temperature operation down to -40°C - Option: Battery diagnosis system - Option: Regeneration charging for deeply discharged batteries - Electrical safety - Certifications: EN60335, EN60950, UL60950-1, UL1236, CSA C22.2 No.60950-1-07 Used by leading automotive manufacturers Input voltage 100-240VAC wide range (tolerance: 85VAC-265VAC), 45-65Hz 130-350VDC; NOTE: For use in combination with inductive power transfer, use special firmware! Inrush current / 30A at 264VAC, temperature independent Fuse: 16A slow-blow (e.g., characteristic B) Power consumption at full load / 0.98 No-load power / 10W, disabled at the output Input fuse / F1 (2x 7A-8A T) / 250V (6.3x32mm) Transient overvoltage protection / Varistor (8kA / 151J) Input connector / IEC/EN 60320, C14 Weight: 8.2 kg More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2012, Complete Power Plant, Full CHP Plant Wood Chip Heating / Thermal Oil System VAS 6MW Thermal + 1.1MW Electrical Output Hnodpfx Aovytfuekrsu The plant was originally built in 2003 & 2004. Major components such as the thermal oil heater and hot water ECO were entirely replaced in 2012. Components: - Walking floor - Hydraulic feed - VAS combustion chamber - VAS thermal oil heater - Hot water ECO - Dedusting (coarse and fine dust removal) - Ash removal by chain conveyor - Exhaust gas path incl. fans and chimney system - Turboden ORC module with 1.1MW electrical output - Complete plant control with visualization Including units, pumps, and valves Including thermal oil pumps Including thermal oil Including all accessories required for operation The plant is being sold because a larger plant with significantly higher capacity has been built nearby. The walls and roof of the boiler house can also be included if required. Remaining thermal output in operation with Turboden ORC module: 5MW Electrical output ORC module: 1.1MW Fuel consumption approx. 9 loose cubic meters per hour (depending on fuel) Dismantling must be carried out by the buyer. Further information on request.

Condition: used, functionality: fully functional, This machine is capable of producing bent bolts with threads on one end (eye bolt) or both ends (u bolt) Hsdpfszt S U Rsx Akrsnu

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 3,550 mm, total width: 2,600 mm, overall weight: 2,500 kg, space requirement height: 2,600 mm, space requirement length: 3,600 mm, space requirement width: 3,000 mm, 300-liter stainless steel reactor, manufactured by GLASS, model VAS 300. Year 2014. With agitator, jacket, and electrical panels. Motor specifications: 43.19 kW at 50 Hz, 400 V Volume Total capacity 300 L Material Stainless steel Technical specifications Model VAS 300 Year of manufacture Hedpfx Ajv Rr E Iokrsnu 2014 Equipment configuration Agitator Jacket Electrical panels Transport information Length 3550 mm Width 2600 mm Height 2500 mm Weight 2500 kg Manufactured by Glass

Condition: good (used), Year of construction: 2022, C-Pack VAS 992 Net Packing Machine (2022) – incl. SmartDate X45 – unused For sale: a C-Pack VAS 992 fully automatic net packing machine, year of manufacture 2022. The machine has never been put into operation and is in as-new condition. The VAS 992 is ideal for the automatic packaging of potatoes, onions, citrus fruits and other solid products in nets. Specifications and features: Hodez Rgrwspfx Akronu Suitable for nets such as Girsac, Sormapack and Sormabag Equipped with seal and handle function Includes infeed conveyor/compartment conveyor/elevator for filling, belt can be filled with batches/products for per-compartment packagingIncludes small compressorFully automatic operation C-Pack Net Change Technology: Thanks to the automatic net change system, the machine can produce continuously without downtime, ensuring maximum capacity and efficiency. Standard version: Automatic net tube change (continuous production) Infinitely adjustable net length Net transport via transport rollers Two transport units for PE band with cutting device Electronically adjustable PE band length Touchscreen operation Memory for 15 programs Quick net change through loading cone and net stand About C-Pack quality: C-Pack is known for its heavy-duty, solid German build quality, developed for companies where continuous operation is essential. Suitable for 24/7 production Very robust and durable Low maintenance costs High precision and reliability Including SmartDate X45 printer (TTO): Industrial coding printer for printing on film during production. Print “on the fly” For best-before dates, batch codes, barcodes, logos Resolution: approx. 300 dpi Speed: up to approx. 220 packs/minLow maintenance In summary: An almost new, complete and ready-to-use top machine for professional packaging lines. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, first registration: 02/2014, Equipment: ABS, Trailer refrigerated box Empl / Frigoblock ? BÄR tail lift Vehicle details: Manufacturer: Empl Fahrzeugwerk GmbH (AT) Type: VAS 2132 60F0 Chassis number: VA9 2132 60F0 E10084 Year of construction: 2014 Body: Insulated refrigerated box Axles: 2 axles (tandem) Total weight: 18,000 kg Unladen weight: approx. 12,120 kg Payload: approx. 5,880 kg Body & Dimensions: Internal length: 8,955 mm Hnodpfx Akezgv Sgjrsu Internal width: 2,490 mm Internal height: 2,670 mm Load volume: approx. 59.4 m³ Body is insulated, suitable for refrigerated and deep-freeze transport Equipment: Refrigeration unit Frigoblock FK10A (power connection 400/690V) Internal evaporator with fan unit Air ducts for uniform cooling BÄR Cargolift tail lift (hydraulic, 2,000 kg load capacity) Tie-down rails in the interior Support legs, chocks Side protection / underrun protection Condition: Body is sealed and insulated. Normal signs of wear and tear consistent with age, both inside and outside. Area of application: Ideal for the transport of food, fresh produce, deep-freeze goods or pharmaceutical products. Price: 4,900 Euro Location: Austria, Wienerherberg Contact:

Condition: ready for operation (used), Year of construction: 2023, overall weight: 623 kg, Panel saw manufactured in 2023. This SCM NOVA SI 30 features a maximum main blade diameter of 315 mm and a cutting height of 100 mm at 90°. It offers a rip capacity of 1000 mm to 1270 mm, depending on configuration. If you are looking to get high-quality cutting capabilities, consider the SCM NOVA SI 30 machine we have for sale. Contact us for further details. • Max. main blade diameter: 315 mm • Max. cutting height at 90°: 100 mm • Max. cutting height at 45°: 70 mm • Blade tilting: 90°–45° • Rip capacity (parallel fence): 1000–1270 mm (depending on configuration) • Voltage: 400 V (three-phase) • Frequency: 50 Hz • Nominal current: 12 A Hodez Sqpvepfx Akrenu

Condition: good (used), Year of construction: 2023, functionality: fully functional, Keyence MD-X2500A 3-Axis Hybrid Laser Marking System, 25W Laser Marker Used, from business liquidation Initial purchase: 03/2023 3-axis hybrid laser marking system, 25W special edition Marking laser (control unit + marking head) MD-C2B safety module MD-AD-XYT XY tracking add-on for MDX2 MD-AD-ZT Z tracking add-on for MDX2 MD-AD-2DR 2D code reader add-on for MDX2 MD-AD-3D 3D add-on for MDX2 Power cable for MDX/MDF/MLZ Marking process: Simultaneous 3-axis scanning (XYZ) Hnedpfx Akjz H U Uderju Marking area: 125 × 125 × 42 mm Standard operating distance (± variable width): 189 mm (±21 mm) Marking resolution: 2 μm Scanning speed: max. 12000 mm/s Marking laser Wavelength: 1064 nm Output power: 25 W Rated voltage and power consumption: 100 to 240 V AC ±10 %, 50/60 Hz, 850 VA max. Weight: Control unit: 23.0 kg, Marking head: 13.8 kg PC software: MB-PH1 *1 (Marking Builder Plus, marking diagnostics tool) must be requested from Keyence We recommend an inspection Information without guarantee Details, information, and technical data from the manufacturer To prevent any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. and 4:30 p.m. During this time, inspections and collections are possible and desirable, AFTER prior appointment arrangement. Subject to prior sale, changes, errors and omissions.

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 35120025 (inkl. Zubehör 35120030/35120035/35120040), type of input current: three-phase, space requirement height: 2,010 mm, space requirement length: 2,374 mm, space requirement width: 754 mm, Sollich nut mixing unit, type NM 200 VA, year of manufacture 2021, for the continuous mixing of dry ingredients into chocolate, fat, and spreadable products. Performance: • max. 1,200 kg/h of spreadable product with 5% dry ingredients (60 kg/h) • max. 1,200 kg/h of spreadable product with 10% dry ingredients (120 kg/h) Equipment: • retractable mixing screw for simplified cleaning, recommended for frequent product/color changes Hsdpfx Akezzvhdsronu • 2 installed rotary valve feeders TD 1 (machine no. 35120030 and 35120035), arranged opposite each other, each with a level switch and a 150-liter hopper. This allows two different dry ingredients to be dosed in parallel or double the dosing capacity for one dry ingredient to be achieved. • Double-walled collection hopper at the mixer outlet with emptying pump SKP 1000 L-VA (machine no. 35120040) • Unheated connecting pipe attached to the side of the lower container section to the hopper for complete emptying via the attached rotary lobe pump SKP 1000 L-VA, can be shut off on both sides with flat flap valves, pipe can be removed via milk pipe fittings and quick-release couplings. • Hot water circulation system with water-water heat exchanger and circulation pump to supply the mixer, collection hopper, emptying pump, and piping to the filling system, for connection to the customer's cold water supply. • Stainless steel control cabinet for housing the power electronics • Visualization and operation are carried out ex works via the HMI of the associated tempering machine; a separate operating panel is not part of the unit. • Completely installed on a mobile stainless steel frame with swivel casters or lifting tabs for moving with a lifting device, frame with ergonomic handle, all media connections are pluggable or with quick-release couplings. This makes the unit mobile and can be switched between several lines. For operation with another control system, an adjustment of the visualization is required; the power electronics are included in the supplied stainless steel control cabinet. Connection requirements: • customer's cold water for the hot water circulation system • 400 V, 3 phases, 50 Hz + neutral + earth Condition, history and process: Year of manufacture 2021, delivery and commissioning by Sollich in week 40/2021, approximately 180 operating hours. Used exclusively for palm oil-free spreads including nut-containing products, stored dry in Wuppertal since the end of 2024, inspection by appointment. Documentation and conformity documents are available. Purchase value in 2021 according to order confirmation: €116,830 (unit complete including rotary valve feeders, emptying pump and stainless steel frame). Sale from business to business with exclusion of warranty, technical specifications according to manufacturer's documents, subject to errors. This nut mixing unit is also available as part of a complete tempering and mixing system (including Turbotemper TE 1600 D and cooling unit), see advertisement ID A22725782.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 4796013, ROTOX CORNER PUTTYING MACHINE EPA-479 For applying putty to the weld seams on PVC window frames. 1 Contour milling unit, PLC and 4-axis CNC control. Pneumatic workpiece clamping for profile heights of 50 to 115 mm and profile widths of 50 to 130 mm. Remote control with screen and PC control. Hnsdpez Iynfjfx Akrsu Base machine, profile support, window exterior, bottom. Technical data: Compressed air: 7 bar (filter pressure regulator) Voltage: 240/400V, 50Hz, 1.8kW Dimensions: 6,000x4,700x1,900mm (with WT) Weight: 960kg Year of manufacture: 2000 4 ROTOX-EPA-479-ASES 47241908 Milling unit for visible surfaces (grooves and smooth). Top and bottom. 2 ROTOX-EPA-479-FDV-O/U 47251834 CNC milling unit for sealing plane, vertical, from above and below. 2 ROTOX-EPA-479-AI-R/S-VA 47241928 Milling unit for inner corners with a radius or a bevel, including a vertical milling unit up to 23° to the vertical, from below. 8 ROTOX-EPA-479 NC PROGRAMS GEALAN 47211260 8 ROTOX-EPA-479-NCPROG-COPIES for decorative profiles 47211261 1 ROTOX-EPA-479-PE 47211270 Profile recognition in the machine (for NC program copies and profile recognition). ROTOX-EPA-479-WT426-RS Turning station ROTOX WT 426 Transport direction: to the right when viewed from the front. Frame size 350x350mm to 2,000x2,000mm, for automatic feeding, turning and further transport of window frames, with support table, drive elements and software. Table size: approx. 4,700x2,500mm

Condition: used, Manufacturer: Seydelmann Model: K64DC8Q-VA Year: 1999 Condition: Used Serial number: 99099-1 Stock number: 2859 Bowl: 2 speeds Knives: variable speeds Steam: 1.5 Bar, 55 kg/h Vacuum pump: Elmo 2BV2071, 125 m³/h Power: 3 x 400V, 50Hz, 50kW Hnedjz S H Uhspfx Akrou Dimensions: 1750 x 1950 x 2000 mm Weight: 1700 kg Equipped with an ejector, water dosing system, and temperature indicator.

Condition: refurbished (used), machine/vehicle number: MT361, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, drilling depth: 120 mm, height adjustment type: mechanical, rotational speed (max.): 3,600 rpm, rotational speed (min.): 40 rpm, total width: 540 mm, total length: 1,155 mm, total height: 2,060 mm, table width: 470 mm, table length: 510 mm, overall weight: 400 kg, year of last overhaul: 2024, travel distance Z-axis: 300 mm, distance table to spindle center: 455 mm, spindle speed (max.): 3,600 rpm, spindle speed (min.): 40 rpm, Equipment: CE marking, For sale: Aciera 22K1 bench drill with VA head Art. MT361 Features: - Drilling capacity in steel, 60 daN/mm²: 22 mm - Tapping capacity in steel, 60 daN/mm²: M18 - Spindle stroke: 120 mm - Spindle diameter: 65 mm - Drilling head stroke: 300 mm - Three-phase motor: 700/1400 rpm - Motor power: 0.74/1.1 kW - CCEA Trackalpha LED lighting mounted on 2 supports - Spindle speed with gearbox: 40-560 rpm - Spindle speed with direct drive: 275-3600 rpm - 6 automatic feeds: For n=40-560 rpm: 0.12-0.25-0.6 mm/rev Hodpfx Ajz R A Uhokronu For n=275-3600 rpm: 0.02-0.04-0.1 mm/rev Machine completely overhauled with new electrical components, spindle nose protection, and CE conformity certificate. Machine price: CHF 15,000,- (excluding VAT)

Condition: excellent (used), For sale: a precision tool microscope from the renowned Japanese company Mitutoyo, model TM-101 (Code No. 176-901). This device is designed for dimensional, shape, profile, surface, and contour inspection in toolrooms, metrology laboratories, and quality control departments. Manufacturer: Mitutoyo Mfg. Co. Ltd., Japan. Type: TM-101. Digital readouts for X and Y axes with ABS and INC functions, preset, data output. Cross-travel measuring table with rotation and adjustment. Lighting functions: Surface, Contour, Main. Power supply: AC 220V, 50–60 Hz, 8 VA. Robust, stable industrial design. Very good condition, complete device, technically sound, ready for use. Ideal for measuring cutting tools, milling cutters, drills, inserts, inspecting precision components, and measuring contours, threads, and the geometry of parts. Hnsdjz Slcxjpfx Akreu

Condition: good (used), Clamping jaws for round samples -Manufacturer: VAS, Clamping jaws for round samples, 4 pieces -Type: 15-30 mm -Dimensions: see photo technical drawing -Case dimensions: 270/230/H80 mm -Weight: 6.2 kg Hnedpfsmiqm Ssx Akrou

Condition: ready for operation (used), Year of construction: 2004, Manufacturer: CE Johansson / Hexagon Metrology Model: Saphir 12.5-30-10 Machine Type: 9489-145 Serial Number: 8489-70305 Measuring Capacity X-axis: 1,250 mm Y-axis: 3,000 mm Z-axis: 1,000 mm Machine Dimensions Overall Width (B): 2,400 mm Internal Width (B₁): 1,450 mm Overall Length (D): 4,860 mm Overall Height (H): 3,790 mm Table Height (H₁): 700 mm Clearance Height (Hₚ): 1,150 mm Weight & Load Capacity Machine Weight: 8,200 kg Maximum Permissible Workpiece Weight: 6,000 kg Clamping Area: 1,450 × 3,400 mm Measuring Performance Resolution: 0.1 µm Accuracy (VDI/VDE 2617 Part 2.1): U₃ = 4 + 5L µm (L in meters) Speed & Acceleration Maximum CNC Speed: 500 mm/s Acceleration: 1,000 mm/s² Hjdpfx Akozrvg Ujrenu Electrical Requirements Power Supply: 230 V ±10%, Single Phase, 50 Hz Power Consumption: 1,500 VA (10 A) Air Supply Operating Pressure: 6–10 kp/cm² (0.6–1.0 MPa) Air Consumption: 48 L/min at 5.5 kp/cm² (240 NL/min) Operating Environment Required Temperature Stability: ±1.0 °C Maximum Temperature Gradient: 0.5 °C Software PC-DMIS Version: CAD++ 2018 R2 (Release) Build: 535 (Pre-Release) Major Release Date: October 30, 2019

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, workpiece length (max.): 300 mm, total height: 2,850 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 560 mm, table height: 800 mm, table length: 1,300 mm, overall weight: 8,000 kg, spindle speed (min.): 25 rpm, spindle speed (max.): 15,000 rpm, tool diameter: 125 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, OKUMA MB56 VA OSP P200M, ATC for 32 tools SK40, chip conveyor, bag filter for internal cooling, 15,000 rpm. Hnjdpfxoyq R I Sj Akreu Feel free to request our all-inclusive package: loading, transport, installation, commissioning, and service.

Condition: used, Year of construction: 1988, Technical details: max. wheel diameter: 210 mm total power requirement: 60 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 2,85 x 2,60 x 1,80 m grinding slide feed: 700 mm grinding slide feeds: 1-15.000 m/min max. workpiece weight: 150 kg centre height: 260 mm grinding wheel diameter: 240 mm Hnsdpfjwrzutjx Akreu

Condition: used, material: 1.4301 Plate formats: 400x400 Hsdpez Ri S Hofx Akrsnu

Condition: used, Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN, Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from an industrial setting and has been professionally operated. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Type of test: Tensile and compression test Technical Performance Data: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnenn (nominal speed) Displacement resolution: 0.038 µm Positioning repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Data transfer to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working space width: 440 mm Working space height (bottom): 1,050 mm Weight with typical components: approx. 160 kg Electrical Data: Adjustable mains voltage: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current consumption at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented test and calibration records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Temperature during testing: 23.3 °C Hnodpfxozizrke Akrju Displacement measurement system: Incremental encoder (rotary) Force sensor installed 29.01.2014 Force sensor: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force sensor: Xforce P Module: DCSC Rotation before test series: 120° testXpert control system Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measuring module Force sensor Xforce P / Xforce HP Incremental encoder (rotary displacement measurement system) ISO 7500-1 compliant force measurement Installed under the traverse Important Note: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force sensor DCSC module Specimens / Grips Adapters and holders Tools Documentation folder with documents Scope of delivery as shown in the pictures. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Hexagon Type: Hexagon Optiv Performance 442 Hsdpfxjzgr R Ej Akrenu Product description: The 3D multi-sensor coordinate measuring machine Optiv Performance 442 combines optical and tactile measurements in a single system. The system supports multi-sensor measurements with a vision sensor, tactile sensor, TTL laser (Through-The-Lens), and the innovative Chromatic White Light Sensor (cws). The base unit with a vision sensor can be expanded with all available sensors in a modular fashion. Application areas: • Suitable for use on level floors • Versatile geometric measurements and GD&T analyses with standard construction accuracy • Design principle: » Low-vibration granite construction with a fixed bridge and a movable table » Integrated substructure with optional vibration dampers • Guides: » Precise mechanical linear guides in all axes • Drives: » DC servomotors, power transmission via backlash-free recirculating ball screws in the center of gravity • Length measuring system: » Incremental length measuring system • Resolution: 0.1 pm Hexagon Optiv 442 multi-sensor measuring machine equipped with a camera, laser, and Renishaw probe system. • Measuring range per sensor: 410x410x200mm • Dimensions: 1232x910x1663mm • Weight: approx. 940kg • Max. load capacity: glass plate 30kg • Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) • Max. travel speed per axis: 200mm/s • Camera with 2-stage zoom • Laser • LED ring light • Renishaw 6-position probe changer • Renishaw TP200 probe system • Monitor operation • Windows 7 Ultimate evaluation station • Measuring machine HEXAGON Optiv 442 Electrical connection values: Voltage 115/230 V ± 10% Mains frequency 50/60 Hz ± 5% Power consumption 1000 VA Weight: approx. 1100 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Hnodpoz Slirefx Akreu

Condition: excellent (used), Device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision (Image Controller 1) software. Condition: very good, complete, ready for operation. Technical data and features: • Model: PRECIsset 400 • Measurement system manufacturer: EZset GmbH & Co. KG, Germany • Control screen: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • Measuring range X / Z axes: up to 400 mm Hjdpfx Asz Slilskrjnu • Camera with image processing system • Edge, length, and tool diameter measurement function • Results can be saved and printed • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Screen operates correctly • Longitudinal/Transverse axes reference correctly • Well-maintained unit from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable tool setup prior to CNC machining. The EZset vision system allows for blade geometry analysis and tool wear inspection. High measurement accuracy ensured by a stable column and industrial-grade optics.

Condition: used, et ETSYSTEM Electronic Load GPIB Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series has its own control and display panel, and a 5-status recall/memory, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measuring device test function provides a quick diagnosis of test results for production and QC test throughput. Hnodpjzd Uh Isfx Akrsu Features Voltage, current, watt, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit meter display for voltage, current, watt, and VA. Suitable for sine, square, and step waves. Width 600 mm, height 1506 mm, depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, ZEISS Multisensory CNC Coordinate Measuring Machine O-INSPECT 442 Professional coordinate measuring machine for optical and tactile Hnsdpfjzii Dhjx Akreu precision measurements in industry, research, and quality assurance. For sale is a used multisensory coordinate measuring machine from the manufacturer Carl Zeiss IMT GmbH. The ZEISS O-INSPECT 442 combines highly precise optical and tactile measurement technology in a CNC coordinate measuring machine. The installed ZEISS CALYPSO measurement software enables convenient evaluation of measurement data as well as the display of the actual state, target profile, and deviations. The system is ideal for quality assurance, toolmaking, precision engineering, medical technology, as well as research and development. Technical data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: Coordinate measuring machine Measuring range X: 400 mm Measuring range Y: 400 mm Measuring range Z: 200 mm Max. workpiece weight: 20 kg Noise level: < 70 dBA Measurement system: Multisensory measurement system Optical and tactile measurement CFS measuring head system CALYPSO measurement software CNC-controlled measurement sequences Electrical data: Supply voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC (±10 %) Current type: 1 / N / PE Frequency: 50–60 Hz (±3.5 %) Power consumption: max. 1500 VA Dimensions: Width: 1,055 mm Depth: 1,351 mm Height: 1,770 mm Weight: Coordinate measuring machine: approx. 800 kg Max. workpiece weight: 20 kg Equipment: Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation CFS measuring head system Reference probe Calibration standard Calibration template Applications: Coordinate measuring technology Optical measuring technology Tactile measuring technology Quality assurance Toolmaking Precision engineering Medical technology Research and development Scope of delivery: ZEISS O-INSPECT 442 coordinate measuring machine Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation Measuring head system Reference probe Calibration standard Calibration template Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Due to its size and weight, shipping is possible via a freight forwarder. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005, Sollich Turbotemper® TE 1600 D, manufactured in 2021, is a chocolate, fat mass, and spread tempering machine. Tempering capacity ≥1,350 kg/h, actual max. consumption in previous operation approx. 1,200 kg/h. Operating process in three stages: Stage 1 – Heating stage to recrystallize the mass to approx. 45 °C, with a separate hot water circulation circuit, mass temperature-dependent control, and a water circulation pump with electric heating. The circuit also has a cooling function, so mass inlet temperatures above 45 °C can be compensated. Stage 2 – Cooling and crystallization zone, guaranteeing a constant crystal quantity regardless of the mass flow rate. Large cooling surfaces and precise temperature control; specially shaped shearing and mixing tools create a high shear gradient and accelerate the formation of microcrystalline, stable beta crystals. Stage 3 – Mixing zone for homogeneous distribution of the beta seed crystals. The mixing stage can also be operated as a cooling stage for lower starting temperatures or higher throughput at the same starting temperature. Equipment and features: Hedpfxszzvgto Akrsnu • First-in/First-out principle, dwell time of all mass particles is the same • Siemens PLC with TP 900 (9") touch panel, parameters for up to 40 masses can be stored as retrievable programs • Reinforced drive with measurement of the power consumption, including visualization in the HMI. • Turbulent water flow, separate circulation pump for each stage, automatic power control • Two additional water control circuits in the frame: for heating the mass line to the mixing unit and the mass return line to the tank, as well as the line between the tank and the tempering machine, including operation via HMI. • Thermal start-up protection to prevent the machine from starting if it has not heated up sufficiently • Digital display of the mass inlet temperature, separate PT-100 sensor for the feed line • Safety pressure switch with digital pressure display, shuts off the feed pump in case of overpressure • Preset programs "Tempering" and "Night" with automatic adjustment of all heating and cooling circuits. Included in the scope of delivery: Feed pump type SPN 1500 (2"), machine no. 35120010, frequency-controlled via the tempering machine's control. Bypass pump type SPN 1000 (2"), machine no. 35120015, frequency-controlled, operated via HMI. Connection: Cooling water 5–10 °C, customer-side, 2–4 bar, minimum differential pressure supply/return 1 bar; 400 V, 3 Ph, 50 Hz + neutral + earth. Dimensions according to manufacturer's drawing A 17555-2, available. Condition, history and handling: Manufactured in 2021, delivery and commissioning by Sollich in week 40/2021, approx. 180 operating hours. Used exclusively for palm oil-free spreads, stored dry in Wuppertal since the end of 2024, inspection by arrangement. Documentation, operating manual and conformity documents are available. Purchase value in 2021 according to order confirmation: €121,320 for the unit including the specified pumps and water control circuits. Sale from commercial to commercial, excluding any warranty, technical specifications according to manufacturer's documentation, subject to change. This tempering machine is also available as part of a complete tempering and mixing system (including nut mixing unit NM 200 VA and cooling unit), see advertisement ID A22725782.