Used Die Magnetprofis Wood Shredder for sale (11,191)

Condition: new, Year of construction: 2025, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm Ksdpfxjyhzhnj Akwonb - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. Knjdpfx Aoyhzhuskwjb We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) Kodpfxjyhzhzj Akwonb PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2026, Overbelt magnetic separator, magnetic tape, overbelt magnet, magnet separator, metal detection, demetallization plant Our all-round talent - overbelt magnetic separator is for sale Permanent overbelt magnetic separator Kodpfx Akohupkmswenb TYPE PEM1200 1200x550x200mm ===== 4x ring screw for suspension PU conveyor belt endless GB30 black matt Magnet dimensions: 700x230x120mm 7 x T20 studs high-frequency welded High-quality triple aluminum construction Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-55 0.18 KW three-phase gear motor GEMOTEG 2 pcs. side protection plates V4A Magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole pieces.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! Kodpfx Asv Tdq Iskwjnb We invite you to visit our technical center to experience the quality and functionality for yourself. Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idle - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally with control cabinet extension for discharge conveyor belt and overband magnetic separator Complete solution with discharge conveyor belt in any configuration. Our core competence lies in delivering exactly what the customer truly needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems All prices are net prices plus 19% VAT All information provided without guarantee, while stocks last!

Condition: ready for operation (used), Year of construction: 1994, Mawera RZM 200 Main motor: 22 kW with electronic soft start Automatic idling shutdown Hydraulics: 1.0/1.4 kW, reversible Hopper opening: 844 x 1000 mm All-steel pipe: 270 mm Ø Rotor speed: 135 rpm Knsdpfey T Ih Nsx Akwjb Chopping teeth: 30 pieces, replaceable Chopping capacity: 500-850 kg/h Extraction: 30-35 m/s Weight: 2100 kg (without control cabinet) Control cabinet: with PLC microprocessor control 30 pieces, replaceable 500-850 kg/h with PLC microprocessor control Operating hours: only 2562 Difference between RMO and RZM: The RMO is an older model, a classic found on the used market. The RZM 200 is its modern evolution – more robustly built, intelligently controlled, easier to maintain, and more efficient when processing modern wood waste and pallets.

Year of construction: 2021, condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54 Kodpfjh Eld Eex Akwsnb

Condition: excellent (used), Year of construction: 1990, operating hours: 4,456 h, Wood shredder Manufacturer: Weima Type: WL 6 Year of manufacture: 1990 Hopper opening: 800 x 1,000 mm Power: 18.5 kW Screen diameter: 15 mm Kedpfsz A Ed Iex Akwenb Rotor diameter: 368 mm Weight: approx. 1,500 kg

Condition: ready for operation (used), Year of construction: 1995, operating hours: 1,367 h, functionality: fully functional, overall weight: 1,300 kg, We are offering this ready-to-use Schuko ZM 700 S wood chipper, manufactured in 1995. The machine features PLC control. Kodpfjzuy E Hex Akwjnb If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2001, used wood shredder Manufacturer: Weima Type: WL 4 Year of manufacture: 03/2001 Technical data V - Rotor Motor 18.5 kW 400 V, 49 A, 90 rpm Feed opening 800x600 mm Operating hours: 9310 Knsdpfx Aez Dbxqokwjb The wood attachment is not included with the shredder. Location: available from our warehouse in 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 26 kW (35.35 HP), overall weight: 900 kg, fuel type: diesel, color: red, axle configuration: 1 axle, empty load weight: 900 kg, fuel: diesel, Equipment: trailer coupling, === KEY SPECIFICATIONS === Year: 2013 Machine type: Mobile wood chipper Maximum wood diameter: 160 mm Feed opening: 160 x 221 mm Chipping principle: Disc system Feed rollers: 2 horizontal feed rollers Chip length: 4–10 mm Capacity: Up to 8 m³/h Engine: Lombardini diesel Engine power: 26 kW / 35 hp Operating weight: 900 kg Dimensions: 3573 x 1416 x 2440 mm CE certification: Yes === EQUIPMENT & FEATURES === TP PILOT No-Stress system TP STARTER automatic coupling system Hydraulic feed roller speed control Two cutting blades Horizontal and vertical counter knives Single-axle mobile trailer Overrun braking system Galvanized stabilizer leg Adjustable discharge chute === CONDITION === Used condition with visible signs of professional use. The machine shows scratches, paint wear and surface corrosion, as shown in the photographs. Inspection and operational testing are possible by appointment. === DESCRIPTION === 2013 TP TP 160 Mobile diesel wood chipper designed for processing branches and green waste up to 160 mm in diameter. Equipped with two horizontal hydraulic feed rollers, a disc chipping system, TP PILOT No-Stress control and an adjustable chip length from 4 to 10 mm. The single-axle mobile trailer configuration makes the machine suitable for forestry, landscaping, groundcare and vegetation management applications. === PRICE, LOCATION & DELIVERY === Price: €12,500 Knjdpfx Akszrfixjwjb Location: Sittard, the Netherlands Delivery terms: EXW Worldwide transport can be arranged by Collé Rental & Sales.

Condition: new, Year of construction: 2025, Overband Magnetic Separator – Type DMPM 2000 | Industrial Version Manufacturer: die magnetprofis GmbH & Co. KG Model: DMPM 2000 Condition: New / unused Availability: Immediately ex stock ⸻ Technical Description: The DMPM 2000 overband magnetic separator is engineered for the reliable and continuous removal of ferromagnetic contaminants from product streams. It is ideally suited for use in recycling plants, bulk material processing, crushing plants, conveyor lines, and material processing facilities. ✅ Key Features: • Design: Cross-belt discharge with motor & discharge belt • Magnet type: Permanent magnet (maintenance-free) • Belt width: 650 mm • Magnet length: approx. 2000 mm • Support structure: Robust welded steel construction • Drive: Electric motor with low-maintenance gearbox • Ready to operate: Pre-assembled, ready for operation, incl. lifting lugs • Options: Control unit in the form of a frequency converter, gallows for suspension ⸻ Fields of Application: • Recycling industry (metal, wood, construction debris, etc.) • Conveyor systems in the cement, energy, or waste sectors • Protection of downstream machinery (e.g., shredders, crushers, mills) • Food industry (optionally available in stainless steel version) ⸻ Scope of Delivery: • Overband magnetic separator DMPM 2000 (new unit) • Conveyor belt with drive unit • Suspension system (chains as required) • Documentation (operating manual, CE conformity) • Optional: Control – frequency converter Our core competence is delivering exactly what our customers truly need. Together with our customers, we develop tailored, application-specific solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Ksdpfxewx H E De Akwenb Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grids, grid magnets, metal separator, block magnet, filtration systems

Condition: excellent (used), functionality: fully functional, power: 55 kW (74.78 HP), type of input current: three-phase, For sale: 4 high-performance drum-type grinders/refiners. Price is per unit. Two are blue; two are orange (model RM800.7). Knedpfxozz Sh Ho Akwsb All machines are in good working order.

Condition: excellent (used), Catalog number: 8108 TECHNICAL DATA - dimensions of the loading hopper (length/width) at the top: 6100x780mm - working width of the rotor: 430mm Knjdpjz A Egpofx Akweb - main motor: 18.5kW - number of knives: 4 pcs - screen diameter: 17mm - outlet diameter: 250mm - dimensions (length/width/height): 1800x850x1480mm - weight: 1080kg ADVANTAGES – Made in Germany – Very good condition – Used shredder Net price: 24,900 PLN Net price: 5,929 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to fluctuations in exchange rates)

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Kedpfx Asd Dy Ugskwenb Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: excellent (used), Year of construction: 2003, Wood chipper Manufacturer: Weima Type: WL 4 Year of manufacture: 2003 Kodpfsz Ai N Rox Akwjnb Operating hours: approx. 1,244 h Power: 18.5 kW Hopper: 600 x 800 mm Rotor diameter: 252 mm Screen diameter: 15 mm Number of knives: 14 Rotational speed: 90 rpm Weight: 1,300 kg

Condition: like new (used), Year of construction: 2016, functionality: fully functional, From year 2016 but has never been in use. As new. The machine has never been used in production. We have only tested it for a short period of time. Data: Opening: 600X1.050 mm. Rotorlenght: 600 m. Knodpjz Dg Iqsfx Akwsb V-rotor with 28 reversible knifes. Motor: 18,5 kW. 400V, 50 hz. RPM: pp. 100. Weight: 1300 kg. Lenght/width/height: 2.045X1.165X1.640 mm. Original manual included. WEIMA - Made in Germany. Screen not included. Available in 10/12 mm 15/20 mm 20/25 mm 30/35 mm ect. Ask for quote. Very good for wood, plastic, composite ect. IN STOCK. We ship all over Europe.

Condition: excellent (used), Catalogue number 7687 Kedozx Rngjpfx Akwenb TECHNICAL DATA - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)

Condition: like new (used), Year of construction: 2012, power: 18.5 kW (25.15 HP), Rotor 260 mm Kodpfx Asyfw D Njkwonb Feed opening approx. 630 x 830 mm Rotor length approx. 630 mm Motor: 18.5 kW Number of knives: 30 Screen present Overhaul: - new motor incl. installation - new slide guide rails - calibration of the slider - new knives - new counter knives - completely new rotor - hydraulics checked / wear parts replaced - new flange bearing UCF 214 - new paintwork - adjustment / test run

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55 Kodpfx Aked Dy S Rjwonb

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Crusher manufactured by the German company WEIMA – after technical inspection – year of manufacture 1992 – documentation Knedpfx Aeuditwokwob TECHNICAL SPECIFICATIONS: hopper dimensions 800 x 1000 mm rotor diameter 315 mm rotor length 800 mm rotor speed 90 rpm main motor 22 kW number of knives 19 pcs rotating cutting knives 30 mm x 30 mm screen size φ 20 mm and 15 mm AUTO-REVERSE HYDRAULIC CHUTE height of the clamping chute 275 mm nozzle diameter φ 200 mm machine dimensions (length/width/height) 210 / 160 / 180 cm weight 1600 kg

Condition: good (used), Year of construction: 2010, Engine size : 18,5 Kw Opening : 600 x 1000 mm Number of knives : 28 trapez knives Rotor diameter : Ø 250 mm Rotor length : 600 mm Rotor rpm : 90/min Knodpfxoz Dn Ufs Akwsb Siewe holes : Ø 15 mm Dust extraction nozzle : Ø 160 mm Can be examined in working condition, ask for WHATSAPP demo. Mounted with new knives + counter knive Weight : 1300 Kg

Year of construction: 2023, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal area 1.500mm(customizable) Rising range 3.000mm (customizable) Infinitely adjustable angle in the kink Feed height: horizontal (individual) Knjdpfxok S Dw Es Akwsb Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. The delivery time for an individual system is currently around 3-4 weeks, depending on the production effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Compact Shredder typ PYTHON-XL 1600, with 15 KW electricmotor, 400V 50Hz• • Electric motorreductor 15KW, 400V, 3phs, 50Hz 40% MORE torque compare PYTHON 1600 Standard • Opening 1600 x 1000 mm • Main dimensions L 2700 x B 1400 x H 2600mm • Discharge opening 400x 100mm • Height discharge opening ca 1000mm • Electrical control box with INVERTER, main switch, selector switch on / off switch and emergency stop • Easily moved either with forklift or by means of lifting eyes • Weight approx. 2700 kg Kedpfxovx Hkzo Akwsnb • Comprehensive machine manual • Finishing in RAL 3002 and RAL 7022 • (Subject to technical changes) • CE certified and "Made in Holland"

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function Kjdpfxszruibe Akwsnb – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)