Used Dimeco 1676 Ev / 2382 Ffps / Microfee for sale (1,446)

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm Bedpfx Ahozrprwsmoln feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Bsdpotgvgpjfx Ahmeln Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Year of construction: 2012, condition: used, Machine Description This used profiling line is equipped with a motorized DIMECO S2971 IP uncoiler, manufactured in 2012. Offered by All Metal, this complete industrial unit is designed for continuous sheet metal processing from coils. The vertical uncoiler, with a weight of 650 kg, features an expansion mandrel for holding the strip. The line includes a feeding station, a multi-head roll profiling bench with a safety enclosure, an elevated control walkway with a centralized control panel, and an automatic discharge station. Machine Usage This used profiling machine is suitable for sheet metal processing plants, metal fabrication shops, and manufacturers of metal profiles. It enables the continuous uncoiling, straightening, profiling, and cut-to-length processing of steel strips and various alloys. This equipment is suitable for large-scale production of rails, slides, reinforcements, or custom profiles for the construction, automotive, and metal construction sectors. Bledpfxsz H Udfj Ahmsn Special Features / Key Advantages The DIMECO S2971 IP profiling line is distinguished by the quality of design from the French manufacturer DIMECO, a benchmark in strip processing. Its integrated work platform offers optimal ergonomics and excellent visibility of the line. The presence of protective enclosures and a dust extraction system ensures a safe working environment. Available from All Metal, a specialist in used industrial machinery, this profiling line represents a valuable opportunity to modernize a production facility.

Condition: excellent (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, coil weight: 2,000 kg, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, spreading range: 900 mm, Dimeco Coil Pick & Tilt Coil Handler Machine Type: Coil Pick & Tilt Handler Bedpou Nx Nzjfx Ahmoln Model: Coil Pick & Tilt 20 1500 250 Year: 2023 Hours: 10hrs Condition: Excellent Description Electric Powered Truck Specifically Designed For Coil Handling – No manual operation. – Coil tilting is fully controlled safety is improved. – Truck is able to pick up coil from a standard wooden pallet. Technical Specifications Max Coil Weight: 2000kg External Ø (Max): 1500mm External Ø (Min): 600mm Width: 250mm Internal Ø: 508mm Max Height of Forks: 1300mm Forks Thickness: 40mm Distance Between Forks(Open): 1610mm Distance Between Forks(Closed): 610mm Truck Weight: 1365kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, DECOILER DIMECO WIDTH: 1350mm COIL WEIGHT: 12t WITH INVERTER HYDRAULIC OPEN / CLOSE Blodpfx Ahoytqxpjmsn

Condition: used, Year of construction: 2005, Rated voltage: 400V/50Hz, rated current: 5A, rated power: 2kW, control voltage: 24V DC. Length: 3400mm, width: 930mm, height: 1100mm, weight: approx. 600kg. Available from October 2026. Inspection by appointment possible. Bodpfx Ajz E Nrbehmeln

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Complete external and internal corner machining. Bedpfx Aey U Rbnehmoln Support table.

Condition: used, Infeed: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor knives: 3 Bedpfjz Hxmdex Ahmoln stator knives: 2 Drive: 7,5 kW Double diagonal cut With roller feeder, electric control unit and sound insulation box

Condition: good (used), Year of construction: 1989, BESSER paving block machine - VIBROBLOCK Year: 1989 Bjdpfx Ajz H Ib Dehmoln Pallet dimensions: 1450x1100mm. 5 molds for paving blocks. Specially equipped for color production, with 3 hoppers for the main mixture and 1 hopper for the facing mixture. Double Power Trainer 40 ft container for controlling the mixers. 2 elevators with a height of 26 ft. 1 pallet truck. Belt conveyor for double paving blocks. Device for loosening the stones. Set of feeders for the line, entry for wooden pallets. 2 mixers for mixtures with a container, 3000/2500, mixer 750 / 0.5m3 ltr. Concrete bucket for the BESSER machine with a rail. Operational condition.

Condition: used, KHS triblock filling line 45-80-10 - KHS bottle rinser, Innoclean FR-EM 45 - KHS volumetric filler, Innofill EV-VF 80 with ENDRESS+HAUSER DOSIMAG A flowmeters - ALCOA KUPI 10/540 capper (max. 25,000 bph) Output: approx. 20,000 bph Control system: S-7 Bsdpfx Ahoychaismjln Year of manufacture: 1998 Complete machine documentation – several folders.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, controller model: SIEMENS 840 D, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 640 mm Number of pallets: 2 Table size: 2 × 1,000 × 450 mm Table load capacity: 600 kg Spindle speed range: 50–10,000 rpm Drive power: 18.5 kW Tool interface: DIN 69871 / ISO 40 Feed rate range X/Y/Z: up to 10,000 mm/min Rapid traverse rate in all axes: 30 m/min Bedpfx Ahsz Ibb Temsln MACHINE DETAILS CNC path control: SIEMENS 840 D Number of tool positions: 30 Machine dimensions & weight Machine dimensions L × W × H: approx. 3,605 × 3,041 × 3,220 mm Machine weight: approx. 6,700 kg EQUIPMENT 2-position pallet changer 30-position tool changer Internal coolant supply (ICS) Full enclosure with electrically interlocked safety doors Linear guides with double roller recirculating bearing for even absorption of high torques in all directions Ball screws in all 3 axes Machine bed made of Meehanite cast iron for high precision, rigidity, and vibration damping Swivel chip conveyor with integrated coolant system Preparation for 4th axis CE compliant

Condition: ready for operation (used), Year of construction: 2003, A Deckel Maho 5-axis CNC universal machining center is offered, including an Interlit compact filtration system for the coolant supply. 1) Deckel Maho DMU 70 eV 5-axis CNC universal machining center, year of manufacture: 2003, X/Y/Z travels: 750mm/600mm/520mm, B-axis: approx. 180°, C-axis: 360°, rapid traverse X/Y/Z: 50m/min, feed rate: approx. 20m/min, max. spindle speed: approx. 18000rpm, spindle power: approx. 25kW, max. rated power: approx. 35kW, spindle torque: approx. 87Nm, tool holder: SK40, table dimensions X/Y: approx. 700mm/500mm, max. table load: approx. 200kg, tool magazine: 32, weight: approx. 8500kg. 2) Interlit SUK 200-900 compact filtration system, year of manufacture: 2003, filter area: 0.2m², filling volume: 900l. Inspection by prior arrangement is possible. Bodszrn Iqepfx Ahmoln

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 6 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 11,000 mm, total height: 5,430 mm, total length: 16,630 mm, table length: 2,500 mm, table width: 2,500 mm, torque: 2,045 Nm, table load: 40,000 kg, coolant supply: 40 bar, workpiece weight (max.): 40,000 kg, grinding spindle motor power: 46,000 W, rotary table diameter: 2,500 mm, Equipment: documentation/manual, CNC HEIDENHAIN iTNC530 Drive system: SIEMENS SINUMERIK TRAVEL Longitudinal (X): 10,000 mm Vertical (Y): 3,500 mm Cross (Z): 1,500 mm Table (V): 1,500 mm Axis support: Hydrostatic FEED RATES Working feed rates: 0 – 6,000 mm/min Rapid traverse rates for axes Y/Z/X: 25,000 mm/min SPINDLE Ram section: 700 x 500 mm Power: 46/37 kW Rotation speed: 5,000 rpm Torque: 1,691 – 2,045 Nm Morse taper: ISO 50 ATC Number of positions: 100 CLAMPING SURFACE: Dimensions: 10,000 x 2,500 mm Load capacity: 10,000 kg/m² TABLE Surface: 2,500 x 2,500 mm Bsdpfxjz Ib Els Ahmsln Travel: 1,500 mm Resolution (B-axis): 0.001° Load capacity: 40,000 kg Support: Hydrostatic HEAD Type: TUPC Spindle taper: ISO50 A/C axis: 0.001° Maximum torque: 1,210 Nm Maximum speed: 5,000 rpm Maximum power: 46/37 kW Coolant: Internal, 40 bar HEAD 2 Type: SEELS4 Spindle taper: ISO50 Spindle extension: 400 mm HEAD CHANGING PICK-UP STATION Positions: 3 Maximum workpiece weight: 79.3 kg Machine dimensions: 16,630 x 11,000 x 5,430 mm Year of construction: 2008 ACCESSORIES: - 3-position head changer - High pressure, 40 bar - Filtration system - Chiller - Renishaw RMP60 probe - Blum tool presetter - Electrical diagrams - Perimeter guarding - Chip conveyor - Operation and maintenance manuals - CE certification

Condition: ready for operation (used), Year of construction: 2015, 1. Veneer sewing machine Kuper Brand: Kuper Model: Multi EV-1000/GL Serial no: K151-00032 Article no: 160802 Year model: 2015 Tech data: Max operating width in the direction of the fiber: 1000mm Min operating width in the direction of the fibre: 300mm Veneer thickness: 0,5-2mm Max Veener sheet length: 1000mm Bljdpfeipx Aiex Ahmen Min vener sheet length: 300mm Feed speed 30m/min Compressed air 6-8 bar Dimension of the machine (LxWxH): 6605x2450x2200m 2. Feeder Kuper Brand: Kuper Model: Aufgageband 1000x1000 Engine power: 0.75Kw 3. Dispenser Kuper Brand: Kuper Engine power: 0.75Kw 4. Electric cabinet Kuper Make; Cup Model: Schaltschrank 1/1 zu Stock no: 2001307PÅL

Condition: used, Year of construction: 2016, functionality: fully functional, number of ink cartridges: 8, color channels: 8, number of print heads: 2, resolution (max.): 900 dpi, paper width (max.): 1,600 mm, number of feeding trays: 1, total length: 2,945 mm, total width: 730 mm, total height: 1,310 mm, type of input current: DC, input voltage: 230 V, Roland TrueVIS VG-640 – Specifications Brand: Roland DG Model: TrueVIS VG-640 Machine: Large-format eco-solvent printer & cutting plotter Year of manufacture: 2016 Condition: Used; print heads require thorough cleaning. Possible replacement recommended. Print width: maximum 1,600 mm Bledpjz E U Ubsfx Ahmon Max. media width: 1,625 mm Ink: Roland TrueVIS TR2 Ink configuration: CMYKLcLmLk + M Max. print resolution: 900 dpi Print & Cut: Yes, integrated Cutting speed: 10–300 mm/sec. Cutting force: 30–500 gf Blade: Roland CAMM-1 series Media thickness (printing): maximum 1.0 mm with liner Media thickness (cutting): maximum 0.4 mm with liner / 0.22 mm without liner Heating: integrated print heater and dryer Dimensions including stand: approx. 2,945 × 730 × 1,310 mm Weight including stand: approx. 205 kg Software: Roland VersaWorks

Condition: used, mileage: 599,947 km, power: 213 kW (289.60 HP), first registration: 12/2013, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty whatsoever, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typographical errors, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 115) First registration: December 16, 2013 599,947 km Engine: 6,871 cc 213 kW / 289 hp Euro 5 EEV MOT until 10/2026, technical inspection until 07/2027 Permissible total weight: 19,500 kg, unladen weight: 11,285 kg, payload: 7,215 kg Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,225 mm Double doors at the front and rear Bsdpfx Ahsz Iihujmoln Driver's cab with door 38+2 emergency seats + 40+1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system connected to the cash register Tires: 275/70R22.5, front approx. 60%, rear approx. 80/80% Various signs of wear and tear, consistent with the age Good overall condition Last inspection at 565,195 km on April 23, 2025, next inspection at 625,195 km January 20, 2025: Air reservoir replaced. October 2, 2025: Head gasket + valve cover gasket + engine mount on the passenger side rear replaced. January 28, 2026: Brake pads on the front axle replaced, brake caliper on the front axle, driver's side, replaced. Price: €12,000.00 (net) All information is provided without any warranty whatsoever. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Year of construction: 1985, condition: good (used), Linck recutting group consisting of: EV 40 infeed V40 chipper with pull-out rollers with 2x75/100 kW MKV circular resaw with side board separator Blodpfxoufqicj Ahmjn with 2x200 kW incl. hydraulic units without switch cabinets can be inspected by arrangement. System can also be offered overhauled!

Condition: used, Year of construction: 1971, swing diameter 0520 mm turning diameter over bed slide 400 mm turning dia. in gap 1000 mm Bljdjy Nd S Ajpfx Ahmen turning length 1250 mm turning speed range - spindle 11,2 - 1120 U/min total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,7 x 1,7 x 1,7 m Machine has a 4 position toolholder with quick change device and DRO.

Condition: used, Year of construction: 2006, functionality: fully functional, We offer this used Crosland REVOTEC 1060 SR Young Shin 106SR with stripping unit, year of construction 2006. Manufacturer: Crosland Model: REVOTEC 1060 SR Serial number: 06006 Manufacture date: November 2006 12 million impressions Automatic grip edge removal Max sheet size 760 x 1060mm If you have any questions or need more information, feel free to send us a message or give us a call. Bljdpez Hlgdjfx Ahmjn

Year of construction: 2019, condition: ready for operation (used), Plate processing center manufactured in 2019. This Behringer MAG EVO 420 is suitable for drilling, tapping, marking, milling, and plasma cutting of flat steel and sheet metal. It features a roller conveyor for sheets up to 4000 x 2000 mm and an automatic turret tool changer with 14 tool positions. If you are looking to get high-quality plate processing capabilities, consider the Behringer MAG EVO 420 machine we have for sale. Contact us for further details. - Infeed System: Roller conveyor for flat steel/plates up to 4000 x 2000 mm with zero-position transverse conveyors, NC feed carriage, and retractable clamps- Outfeed System: Outfeed roller conveyor with lowerable discharge table and chute into material collection container for small parts- Drilling Unit Drive Power: 16 kW- Spindle Speed: 160 to 4000 RPM- Tool Changer: Automatic turret tool changer with 14 tool positions- Software Options: Milling, V-scoring marking, and DSTV interface for machining data import- Plasma Cutting Unit: Kjellberg HiFocus 360i (for material thicknesses up to 50 mm)- Exhaust System: Large-dimensioned filter unit of older year of manufacture with available piping- Control & PC: Modern CNC control enabling remote maintenance by Vernet Behringer service department, machine computer including software, and office software license- Sheet Dimensions: Min. 1500 x 300 mm (750 x 400 mm with restriction), Max. 4000 x 2000 mm- Min. Finished Part Dimensions: 80 x 80 mm- Sheet Weight: Max. 2000 kg and 650 kg/m- Drilling Diameter: 5 to 40 mm- V-Scoring Marking Depth/Diameter: 5 to 40 mm- Plasma Cutting Thickness: 5 to 50 mm- Number of Carriages: 2 clamps - feed carriage, laterally placed- Number of Clamps: 4 clamps (2 + 2)- Transverse Conveyors: 3 short-stroke transverse conveyors to align sheets against clamps after loading- Working Height: 1000 mm Blsdpsz H Nwgefx Ahmon

Condition: used, mileage: 602,638 km, power: 213 kW (289.60 HP), first registration: 12/2013, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 09/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 119) First registration: 16.12.2013 602,638 km Engine: 6,871 cc 213 kW / 289 hp Euro 5 EEV MOT valid until 12/2026, technical inspection valid until 09/2027 Permissible gross vehicle weight: 19,500 kg, unladen weight: 11,270 kg, payload: 7,230 kg Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,225 mm Double doors at the front and rear Driver's cabin with door 38+40+2 emergency seats + 1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating 12-volt socket Emergency stop Stop-at-stops brake Driver's seat ISRI with heating and ventilation Lawo ticketing system Tires 275/70R22.5, front approximately 40%, rear driver's side approximately 80/80%, passenger side approximately 40/40% 14.05.2024: Air tank replaced. 27.09.2024: Engine mount on the left replaced, brake pads on front and rear axles replaced, front left brake caliper replaced, spring accumulators replaced, oil change due. Various signs of wear and tear, consistent with age. Good overall condition Last inspection at 548,085 km on 27.09.2024, next inspection at 608,085 km. Bledpfxez Id Szs Ahmon Price: € 12,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to a value of € 10,000. For disputes exceeding this value, the district court of Schwerin applies. Errors, typos, and prior sale are subject to change.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, ABB Robotics IRB 2400L Type B IRC5 M2004 robot – DeviceNet Controller: IRC5 M2004 Number of axes: 6 Max. payload: 7 kg Max. working range: 1800 mm Year of manufacture: 2011 Scope of delivery: Robot, controller, cables, teach pendant, wiring diagrams Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Bsdpfx Ahjzm H Ifomeln Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping costs vary depending on quantity, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please provide country, city and postal code. Freight costs upon request – please provide delivery address.

Condition: used, mileage: 496,296 km, first registration: 12/2013, fuel type: diesel, number of seats: 38, next inspection (TÜV): 09/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 118) First registration: 16.12.2013 496,296 km Engine: 6,871 ccm 213 kW / 289 hp Euro 5 EEV MOT valid until 12/2026 / Technical Inspection valid until 09/2027 Permissible total weight: 19,500 kg, unladen weight: 11,255 kg, payload: 7,245 kg Overall length: 11,895 mm x Overall width: 2,550 mm x Overall height: 3,225 mm Double doors at the front and rear Driver's cab with door 38 + 2 emergency seats + 40 + 1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating Blodpjz Id S Iofx Ahmjn 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system via IBIS cash register Tires 275/70R22.5, approximately 50% tread all around 06/26/2025: Upper rear right wishbone replaced; 12/10/2025: Front left brake hose replaced Various signs of wear and tear, consistent with the vehicle's age Good overall condition Last inspection on 12/09/2024 at 448,298 km, next inspection due at 508,828 km Price: €12,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Errors, typos, and prior sale are subject to change.

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Bodjzc N Axepfx Ahmoln Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) Bjdpfjzc N H Dox Ahmeln 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses