Used Diskus Diskus for sale (16)

Year of construction: 2007, condition: used, control Siemens 840D grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m Rcedpfx Ajxq Hkueb Tsf In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), Year of construction: 1972, total power requirement 22 kW weight of the machine ca. 8 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DISKUS Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding system and automatic dressing cycle model DDS 600 RAM year 1972 / 2002 modernized Serial no 6967 _____ Grinding wheels Ø, each 600 mm Grinding wheels bore x height, approx. 75 / 150 mm Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s) Grinding spindle drive, each 30 kW Workpiece dimensions: Rcedpfx Asxqrbxjb Tof Grinding width (or workpiece diameter) approx. 20 - 120 mm Grinding (workpiece) height max 50 mm Hydraulic infeed impulse 0.0025 – 0.05 mm Total feed way 150 mm External Ø of workpiece carrier disk 810 mm Feeds of rotary workpiece feed system, infinitely variable 25 – 241 mm/s Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight, approx. 8,000 kg Accessories / Special Features: • In 2002 updated IONIC gauge control Model 17A with monitor and direct input of workpiece data including tolerance range, workpiece counting, statistics. The workpieces are continuously measured via two opposite tracer heads, automatically triggering an hydraulic infeed when needed. • Rotary workpiece feed system with Workpiece carrier wheel (Ø 800 mm) and infinitely variable speed adjustment. • Workpiece height check to avoid crashing with griding wheels • Automatic hydraulic dressing device between the two grinding wheels for simultaneous dressing of both wheels. Dressing cycle can be preset (no. of workpieces/time). Hydraulic return of upper grinding slide to original position/workpiece/thickness (saves a lot of time). • ELBARON Oilmist Extractor with stand and adjustable suction cone • Walkable steel podium for easy machine operating and monitoring • Grinding wheel exchanging device, various spare grinding wheels • Central lubrication using grease and oil mist * Separate switch cabinet. * Separate hydraulic unit. • Currently no coolant filtration device available (can may be supplied separately). This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Bearing rings, Piston rings, washers, hydraulic parts, and other pressed parts.) Condition : very good ! Very well maintained ! Please click here to soon view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Rcsdpfx Abjt Hw N Hj Tsf Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Rcjdpfx Ajxuv Udsb Tjf Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: repair required (used), Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2053, For sale is a used DDS 750 XR rotary surface grinder, manufactured in 2002. Rcsdpeza Thtofx Ab Tjf The machine's IONIOC measuring system controller is defective; otherwise, the machine is in working order. Inspection under power is possible at the Remscheid location.

Year of construction: 1964, condition: good (used), Diskus Werke DSH 600/1000 Side Face Grinding Machine  This machine type is a machine with a motor-driven grinding spindle. Clamping and grinding of the workpieces is done with clamping devices adapted to the respective work. The devices are attached to the machine bed. The column saddle, on which the motor spindle is mounted, serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side surface grinding machine Cooling lubricant: Isocool 1020 BF Rcodpfx Ashtyudob Tof Coolant volume: 400 litres Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of manufacture: 1964 Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 1964, condition: used, grinding length 160 x 400 mm mechanical ja Rodpfex Ik Uusx Ab Tscf weight of the machine ca. 0,5 t

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t Redpfxjvnmnro Ab Tscf grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 7791, overall weight: 5,000 kg, workpiece height (max.): 25 mm, workpiece diameter (max.): 60 mm, TECHNICAL DETAILS Workpiece diameter: 5 - 60 mm Max. workpiece height: 1 - 25 mm Rodpfsyhn Dlex Ab Tscf Number of grinding heads: 2 Configuration: Double-sided (top, bottom) Grinding wheel outside diameter: 457 mm Grinding wheel speed: 24 m/s MACHINE DETAILS Voltage: 380 V Grinding motor power: 2 x 15 kW Dimensions & weight Dimensions (L x W x H): 4,000 x 3,000 x 2,700 mm Machine weight: approx. 5,000 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 607011.189985.120963, input voltage: 400 V, overall weight: 195 kg, nominal power: 0.9 kW (1.22 HP), input frequency: 50 Hz, used bread slicer Treif Diskus 400+, machine no. 607011.189985.120963, 50 Hz, 400 V, 0.9 kW, 2.25 / 10 A, 1.22 PS, cleaned, checked and tested, works flawlessly, weight 195 kg, year of manufacture 2014 Rsdpfx Aszwxtnjb Tjcf

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, Disc grinding machine with magnetic clamping plate 1500mm x 300mm. Coolant system included. Truck loading with crane or forklift possible and free of charge. Rcjdpfx Aezcmzfeb Tsf

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, type of input current: three-phase, total length: 690 mm, total width: 800 mm, total height: 1,100 mm, control voltage: 24 V, input frequency: 50 Hz, year of last overhaul: 2026, space requirement height: 1,100 mm, space requirement length: 690 mm, space requirement width: 800 mm, Bread Slicer Treif Diskus 400 Rjdpfxex Htvfo Ab Tocf Robust stainless steel construction Blade newly sharpened and coated Manual operation via rotary control Slice thickness adjustable Dimensions: 800 x 690 x 1100 mm (WxDxH) Durable technology DGUV V3 tested – exclusively by us Connection: 400V, 16A-CEE plug Used machine, cleaned & SAB-inspected With warranty and spare parts service Options: Maintenance contract Spare blades Delivery service Spare parts box Service package Training & commissioning Here you will find the largest selection of bread slicers!

Condition: excellent (used), Treif Diskus 400+ Bread Slicer, adjustable for slice thickness from 4 to 24 mm. Rjdpskzhw Eefx Ab Tecf

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, Bread Slicer Treif Diskus SB Used equipment Manufacturer: Treif Model: Diskus SB AL5 Year of manufacture: 2011 Stainless steel / Circular blade Power supply: 3-N-PE 50Hz 0.9/1.22kW Rodpoxxkt Nsfx Ab Tscf Operating voltage: 400 Volt For customer self-service 3 different slice thicknesses: 10, 12, 14 mm External dimensions: W: 95 cm D: 70 cm H: 120 cm Cleaned and function tested (test run with bread) Result: very good Article no.: 112284 For questions, please contact us.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, TREIF CIRCULAR KNIFE BREAD SLICING MACHINE, TEFLON COATED Redpfx Absgg Sz Us Tecf SELF-SERVICE MACHINE RECONDITIONED Completely made of stainless steel, on castors If you have any further questions, please send an email or call Thank you in advance

Condition: excellent (used), Year of construction: 2006, 365 USED Treif Bread Slicer. TECHNICAL DATA: - power: 400 V. EXTERNAL DIMENSIONS (in cm): - Width: 80, - Length: 70, - Height: 110. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. Rjdpfx Aoy D Nwgob Tecf The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.