Used Dit Dit-Fna 20/18 for sale (40,533)

Condition: good (used), functionality: fully functional, Paint mist extraction unit DIT-FNA 20/18 - with top and side baffle plates - 2.7 kW - 400 Volt - Pressure 520 Pa - Airflow 7,000 m³/h Machine dimensions 2000 x 1800 mm, weight 300 kg Pedsyrnyhspfx Ai Tegu Transport can be arranged at additional cost! Due to the age of this used machine, warranty is excluded for commercial buyers.

Condition: used, Year of construction: 2006, beside the press granulator Tria 20-18 JM 1,5 KW Manufacturer: Tria Pgsdpswiwcbjfx Ai Tju Type: 20-15 JM Manufacture year: 2006 Power: 1,5 kW Intake: 180x200 mm Rotor knife: 4 Stator knife: 2 Rotor diameter: 180 mm Rotor width: 200 mm Tria 20-18 JM 1,5 KW year 2006 price: € 1,950 contact: Mr. Rainer Eckerle

Condition: used, fuel type: electric, Year of manufacture: 2014 Lifting capacity: 1.800 kg Please contact Gebrauchtgeräte Center for more information Pedpfjzflnhjx Ai Togu

Condition: excellent (used), Lower tensioning element Manufacturer: AMF Type: 6490-18/20 Height: 25 mm Width: 50 mm Pedpfxeln Umbo Ai Tegu For screws M 16 7 pieces available

Condition: good (used), amount 1 STK Dimensions (HxWxD) 300 x 190 x 190 mm diameter 60 mm -> Gear hobbing cutter with HSS cutting material -> Module 18 20°1 gg Lks. -> HSS-C 70.251VF Pgedpfx Aiozuumrj Tsu

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Pgsdpfx Asihf Twei Tou Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: W400-RM-016, type of input current: three-phase, overall weight: 1,700 kg, Zemat W-18-200 Roll Die Cutting Machine Podpfx Aswcm Tisi Tjgu Working width 1800mm, 100mm gap between the rollers

Condition: used, machine/vehicle number: 17076, Year of construction: 2016, operating hours: 8,870 h, load capacity: 1,800 kg, lifting height: 4,770 mm, free lift: 1,470 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, overall weight: 3,465 kg, Equipment: 3rd hydraulic function, enginetype: Electric, manufacturer: Still Pgsdpfx Aiezfdxls Tou Serial Number: 516213G00969

Condition: good (used), Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert milling cutters, shank cutters with internal cooling, indexable end mills, indexable insert drills -Manufacturer: Seco / unknown, indexable end mill with internal cooling, 3 pieces -Type: 2x R416.19-20180 / 1x unknown -Hole: Ø 20 mm -Drill diameter: 2x 18 mm, 1x size/reversible inserts see photos Psdpo Aa I Iqofx Ai Togu -Submission/Price: complete -Transport dimensions: 90/35/H140 mm -Weight: 0.7 kg

Condition: used, machine/vehicle number: 17077, Year of construction: 2016, operating hours: 9,925 h, load capacity: 1,800 kg, lifting height: 4,770 mm, free lift: 1,470 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, front tire size: 2 x 200/50-10 60 - 80%, rear tire size: 2 x 140/55-9 20 - 40%, overall weight: 3,465 kg, Equipment: 3rd hydraulic function, enginetype: Electric, manufacturer: Still Podpfx Aezfdxroi Togu Serial Number: 516213G00976

Condition: used, Year of construction: 2023, SAMSON PG II 20, registered: 04.06.2023, total output: approx. 42,931 cubic meters, 20 cubic meter tank volume, 6 unloading pumps with hydraulic stone trap with 15,000 L/min, ejector vacuum system, sectional discharge, electronic level gauge, rotating beacon + LED work lights, BPW axles, control computer SlurryMaster 8000 with full-touch screen monitor including joystick, tractor control, tire pressure control system, electro-hydraulic forced steering, K 80 lower hitch, hydraulic drawbar suspension, tires: 750/60R30.5 ALLIANCE, side docking arm with filling pump and pivot joint, central lubrication system, transport mount for two 8 suction hoses, 6 suction nozzles with butterfly valve for the ejector, rear-mounted surveillance camera incl. 7-inch color display, mud flaps, PTO shaft. Attached implement: BOMECH MULTI 18 m trailing shoe distributor with 2 distributor heads and hydraulically sprung pendulum system. Offered price including 19% VAT. The location may change, please inquire about the current location before visiting. Subject to changes, errors and prior sale. Pods Ad D Tqspfx Ai Tjgu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 18,435 h, load capacity: 1,800 kg, lifting height: 4,740 mm, free lift: 1,470 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 20 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 15x4,5-8, overall weight: 3,352 kg, total height: 2,150 mm, total length: 2,100 mm, total width: 1,150 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-18 / 6213 – Electric 3-wheel forklift TECHNICAL DATA Podpfx Aiez Aqubj Tjgu Lifting capacity: 1.800 kg Lifting height: 4.740 mm Closed height: 2.150 mm Free lift: 1.470 mm Mast: Triplex (3F474) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro Battery: 48 V/625 Ah (2015) Charger: ohne/without Tyres: Superelastik 200/50-10 (20 %) / 15x4,5-8 (40 %) Service weight: 3.352 kg Length: 2.100 mm Width: 1.150 mm Year of manufacture: 2008 Operating hours: 18.435 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Internal no.: 1308796 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 5,358 h, load capacity: 1,800 kg, lifting height: 4,900 mm, free lift: 1,490 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, battery capacity: 625 Ah, battery voltage: 48 V, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,417 kg, total height: 2,160 mm, total length: 2,000 mm, total width: 1,150 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-18 / 6213 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.900 mm Closed height: 2.160 mm Free lift: 1.490 mm Podpfxsz Aqr Ts Ai Tegu Mast: Triplex (3F490) Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 625 Ah Charger: ohne/without Tyres: Superelastik SE 18 x 7 - 8 (70%) / 15 x 4,5 - 8 (60%) Service weight: 3.417 kg Length: 2.000 mm Width: 1.150 mm Year of manufacture: 2017 Operating hours: 5.358 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1309248 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 152 h, load capacity: 1,800 kg, lifting height: 6,670 mm, free lift: 2,240 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, fork carriage width: 980 mm, fork length: 1,400 mm, empty load weight: 3,543 kg, total length: 2,150 mm, drive type: Elektro, construction width: 1,200 mm, Electric 3-wheel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: AC Technical condition: New Front tire type: Superelastic Front tire size: 2 x 200/50-10 Front tire condition: 80 - 100% Pjdoz Hm Ucopfx Ai Tsgu Rear tire type: Superelastic Rear tire size: 2 x 140/55-9 Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 625Ah Battery year of manufacture: 2023 Double auxiliary hydraulics, fork positioner with side shifter, battery, charger, lighting according to StVZO (German Road Vehicle Regulations).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 14,633 h, load capacity: 1,800 kg, lifting height: 4,700 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 2,180 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,600 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 16 x 6 - 8, overall weight: 3,710 kg, total height: 2,180 mm, total length: 2,140 mm, total width: 1,150 mm, fuel: electricity, Equipment: cabin, STILL RX 20-18 PH – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.700 mm Closed height: 2.180 mm Free lift: 1.450 mm Mast: Triplex (3F470) Fork length: 1.600 mm Fork carriage: FEM 2A Drive: Elektro 48V Battery: 48 V 775 Ah v. 2016 Charger: ohne/without Tyres: Superelastik SE 200/50 - 10 (80%) / 16 x 6 - 8 (80%) Service weight: 3.710 kg Length: 2.140 mm Pgjdpfez Aqb Uex Ai Tou Width: 1.150 mm Year of manufacture: 2016 Operating hours: 14.633 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control Internal no.: 1309262 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), axle configuration: 2 axles, first registration: 12/2002, loading space length: 7,000 mm, loading space width: 1,250 mm, loading space height: 2,300 mm, total length: 8,550 mm, total width: 2,500 mm, total height: 3,250 mm, suspension: air, color: other, Year of construction: 2002, Equipment: ABS, = Additional options and accessories = - Stairs = Remarks = 16212 = More information = Suspension: air suspension Rear axle 1: Tyre profile left: 45%; Tyre profile right: 45% Rear axle 2: Tyre profile left: 40%; Tyre profile right: 40% Tipper: Back Technical condition: very good Podpfx Aisymqg To Togu Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 14,000 h, load capacity: 1,800 kg, lifting height: 4,500 mm, fuel type: electric, Still RX20-18 forklift Year of manufacture: 2018 Battery: 2018 Lifting height: 4500mm Pgedpfx Ajzp H Svei Teu

Condition: good (used), Javo pot holders 18 cm inner diameter holder - Number available: 20 pieces - Inner size of pot holder: 18 cm - Height from bottom plate to upper rim of holder: 11 cm Suitable for Javo Standard and Javo Super More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. - Since 1977 supplier of reliable used agricultural and horticultural equipment - Machines are checked for delivery - Experienced team - We can help you with getting the machine to your company Psdpfxsz Ralks Ai Togu Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026 and will continue to operate until August 5, 2026. The machine has the following configuration: Pgedpjzrf Nrofx Ai Tsu Edge milling unit 1802 Motor power: 2 x 2.0 kW 1st milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for edge milling unit 2nd milling cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for edge milling unit Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Reservoir for 14 cartridges (1.4 kg) GluJet collection container Printing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function milling unit 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System milling cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile milling unit 1833 MOT4 1st milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2nd milling cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Tungsten carbide reversible inserts for scraping blade holder R = 2 mm (2 pieces required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide rail length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - tactile probe vertical, top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: used, Year of construction: 2017, Technical details: grinding diameter: 280/320 mm grinding length: 750 mm centre height: 170 mm weight of the machine ca.: 22,5 t dimensions of the machine ca.: 4,7 x 3,65 x 3,0 m Pgedsttxg Sspfx Ai Tju

Condition: used, functionality: fully functional, machine/vehicle number: H2X386X01800, Year of construction: 2020, operating hours: 1,829 h, load capacity: 2,000 kg, lifting height: 5,070 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-Wheel Forklift Chassis number: H2X386X01800 Load center: 500 Mast type: Triplex Condition: Like new Technical condition: very good Description: Linde E20PH-02 electric forklift. Manufacturer: Linde. Model: E20PH-02. Year of manufacture: 2020. Operating hours: 1,829 h. Load capacity: 2,000 kg. Drive: Electric 48 V. Equipment: Triplex mast, overall height 2,300 mm, fork positioner, side shift, work lights, solid tires. The Linde E20PH-02 is in very good condition and impresses with its compact design and excellent Linde driving performance. Thanks to the triplex mast, fork positioner and side shift, the machine is ideal for demanding storage and logistics tasks. The low overall height of only 2,300 mm allows it to be used even in halls with limited headroom. The charger can be ordered separately upon request. Inspection and test drive possible by appointment. Linde E20PH-02 Electric Forklift Manufacturer: Linde Pgsdjzcrv Ujpfx Ai Tju Model: E20PH-02 Year of manufacture: 2020 Operating hours: 1,829 h Capacity: 2,000 kg Drive: 48 V Electric Equipment: Triplex mast Overall height 2,300 mm Fork positioner Side shift Working lights Solid tires This Linde E20PH-02 is in very good condition and offers the well-known Linde driving comfort and productivity. Equipped with a triplex mast, fork positioner and side shift, the truck is perfectly suited for warehouse and logistics applications. The low overall height of only 2,300 mm allows operation in buildings with restricted access heights. A charger can be supplied on request. Viewing and test drive possible by appointment. Side shift, fork positioner, 4th valve, partial cabin

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm Pgjdpezzwguofx Ai Tju ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: good (used), Year of construction: 2000, functionality: fully functional, LA MACCHINA UTENSILE s.r.l. – FVA 20" PR 180° Automatic wheel brushing machine for processing and deburring aluminum rims. Technical data Manufacturer: LA MACCHINA UTENSILE s.r.l. (Italy) Model: FVA 20" PR 180° Serial number: 2100 Year of manufacture: 01/2003 Machine weight: 3,000 kg Mains voltage: 400 V Frequency: 50 Hz Connected power: 19 kW Rated current: 40 A Max. operating pressure: 50 bar CE marking: Yes Machine description Automatic brushing machine for the post-processing of aluminum rims Processing of rims up to 20 inches Two opposing brush units (top/bottom) Digital adjustment of: Brush speed (top) Brush speed (bottom) Brush current (top) Brush current (bottom) Automatic rotary table / workpiece positioning Pneumatic or hydraulic workpiece clamping PLC-controlled processing Application area The machine is used for: Removing burrs Pgjdpfxew Rrwzs Ai Tju Cleaning wheel contours Brushing the spokes Surface finishing after casting or machining Preparation before painting or final inspection

Condition: used, functionality: fully functional, Year of construction: 1997, operating hours: 5,846 h, load capacity: 1,800 kg, lifting height: 4,300 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-Wheel Forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 200/50-10 Rear tire type: Superelastic Rear tire size: 15x4.5-8 Battery voltage: 48V Battery capacity: 690Ah Battery manufacturer: HSR Battery type: PzS Battery year of manufacture: 2021 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and conforms to FEM4.004. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing options are available on request at favorable terms. We will be happy to provide you with competent and comprehensive advice on our vehicles. Side shifter, 3rd valve, front work light, full free lift, interior mirror, single pedal, 3-wheel, seat. Pgsdpfs Aa Eg Dex Ai Tou

Condition: new, Year of construction: 2026, HIGH-QUALITY SCREENING DRUM – OPTIMIZED DESIGN Suitable for Doppstadt SM 620 / SM 518 and Komptech Nemus 620 Robust construction – optimized hole geometry – high screening performance Are you looking for a powerful and durable screening drum for professional use? Our screening drum has been optimized in its design to combine high stability, reliable material flow, and the lowest possible tendency to clog. Suitable for processing: Compost Topsoil Biomass Wood and organic materials other bulk goods – depending on the selected hole pattern ----- WHAT MAKES THIS SCREENING DRUM SPECIAL? Trapezoidal hole pattern – 18 to 20 mm The openings are laser-cut in a trapezoidal shape and widen from 18 mm to 20 mm. Due to this special geometry, material components that become lodged in the opening during the screening process can more easily exit again. The result: ➡️ fewer clogged openings ➡️ reliable material flow ➡️ consistent screening process. As a result, the drum is not only designed for the largest possible screening area but also for the stresses of daily professional use. ----- A special design advantage: Reinforced screw conveyor In the area of the screw conveyor, there are no openings on either side over a distance of approximately 15–30 mm. This keeps the heavily stressed area closed and provides higher material stability. ➡️ higher load capacity ➡️ less weakening of the material ➡️ robust design of the screw conveyor ➡️ designed for demanding continuous use Rectangular alignment of the hole pattern in the material flow direction This ensures that the material is guided in a controlled manner over the screening area and the available screening area is used efficiently. INDIVIDUAL HOLE PATTERN POSSIBLE Depending on the application, different hole patterns or screen widths may be of interest. Do you need a different hole size or a special design? Please contact us. We will gladly check the appropriate design for your application. Pgodps Ad Uybsfx Ai Tou YOUR BENEFITS ✅ Optimized screening performance ✅ Reduced tendency to clog ✅ Consistent material flow ✅ Large open screening area ✅ High mechanical stability ✅ Reinforced screw conveyor ✅ Robust and durable construction ✅ Professional manufacturing ✅ Suitable for demanding recycling and processing applications ----- We specialize in the manufacture of metal assemblies, screening drums, and components for machinery and recycling technology. If you have any questions about the appropriate drum, design, or hole pattern, we will be happy to assist you. SUITABLE FOR Doppstadt SM 620 SM 518 Komptech Nemus 620 QUALITY FROM PROFESSIONAL MANUFACTURING The result is a robust screening drum for users who value performance, service life, and reliable operation. MANUFACTURER RKS Metallverarbeitung GmbH 48336 Sassenberg