Used Dmc Europa 110 Rp for sale (7,193)

Condition: used, Year of construction: 2001, functionality: fully functional, Manufacturer DMC Model E 110 RP Iedpfsxwwk Ejx Apcoar Year 2001

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. Iasdpjtwzyfefx Apcsr - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 1998, functionality: fully functional, DMC Polisand 110 RP Wide Belt Sander Year 1998 Paint Wide Belt Sander Total installed power approx. 23 kW Sanding width 1100 mm Workpiece thickness up to approx. 170 mm Iaodpfx Apsv Ivuuocsr Motorized height positioning with digital reading device Vacuum conveyor belt, F,LLI FERRARI vacuum unit with 4 kW motor power Feed motor power 1.50 kW Unit 1: Grooved rubber sanding roller, with 8.8 kW blower Unit 2: Sanding pad, with 15 kW blower 380 V / 50 Hz Weight 2300 kg Dimensions: 2.45 m x 1.85 m x 2.0 m

Condition: used, functionality: fully functional, machine/vehicle number: SA002337, Technical data: Working width: 1135 mm 1 Combination unit Iaedjyn N Dgopfx Apcer Shaft diameter: 210 mm Max height of processed material: 160 mm Sanding belt dimensions: 1135x2200 mm Electric lifting Digital display Safety switch Main motor power: 11 kW Voltage: 380V Operating pressure 8 bar Adjustable feed speed Overall dimensions: Depth: 1500 mm Width: 1800 mm Height: 2300 mm

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Iodev A Ta Depfx Apcear Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Iaodpfx Asrbyrpspcsr Weight: 2030 kg Weight of the machine without pad: 1630 kg Stock no: 2001933

Condition: new, - NEW -GENERAL FEATURES:machine frame and worktable* steel structure with electrical cabinet at the front of the machine* sanding belt infeed from the left side of the machine* motorized table height adjustment* main motor integrated in the machine frameelectrical equipment* electromechanical control panel on the front left side of the machine* automatic star-delta start for the main motor* motor protection switch for the motors* motors in insulation class IP 54emergency and protective devices* Safety microswitch for excess thickness* Automatic brake for immediate stopping of the units* Emergency stop safety edge in the workpiece infeed* Mushroom switch in the workpiece infeed and outfeed* Lockable main switch* Automatic emergency shutdown of the machine in the event of:- sanding belt breakage- untensioned sanding belt- protection against lateral movement of the sanding belt- lack of compressed air- overload of the main motorsNote: the standard version with 400 volts 50 Hz requires a three-phase power supply zero conductor ground the 400 volt power supply is without neutral, a single-phase transformer from the price list must also be ordered. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is present or machine version with 220 or 230 volts (50 or 60 Hz) is subject to additional costs (see price list).BASIC MACHINE STANDARD EQUIPMENT- R140/85 rubber-coated calibrating roller diam. 140 mm 85 Sh - 1st pos.- R160/45 rubber-coated sanding roller diam. 160 mm 45 Sh - 2nd pos.- Hard sanding pad with manual adjustment of the working height- Main motor 11 kW (15 HP)- Electronic ammeter for the main motor to display the power consumption- Electronic display of the working height- Electronically controlled sanding belt oscillation- Rubber pressure rollers- Kickback protection in the infeed in front of the first unit- Rubber feed carpet 60 Sh- Roller table with two rollers in the infeed and outfeed of the work table- Carpet feed with two speeds 4,5 / 9 m/min withgeared motor- automatic carpet centeringworking width mm 1.100Min./Max. working height mm 4 - 170Sanding belt width mm 1,115Sanding belt length mm 2,150Main motor power kW (HP) 11 (15)Gear motor kW (HP) 0.45/0.8 (0.6/1.1)Feed speed m/min 4.5/9Consisting of:10.90.87 European Safety Regulations(Mark C.E.)93.07.31 Volt 400 EU93.12.01 Frequency 50 Hz44.44.19 Version "B" for RCS33.31.50 Roller table in infeed and outfeed for long workpieces62.44.50 10" control panel with "eye-S" software integration31.21.60 "RA" inclined ribbed steel contact roller - 1st unit97.50.71 Main motor 15 kW (PS 20) Iaodpfx Apevwfrnecer

Year of construction: 1999, condition: excellent (used), WIDE BAND SANDMACHINE, 2 AGGENATES, CONTACT SHAFT AND SHAFT WITH COIL, SANDMACHINE Bottom drive shaft motor 15 kW, motor with coil 7.5 kW, smooth feed regulation Iaedpfxogrdx Uo Apcor

Condition: new, GRATINGS FOR PALLET RACKING 270CM/110CM SHELVING BAYS Gratings for pallet racking 270 cm x 110 cm bays Data : Iodpey Awbwofx Apcjar - Length per module : approx. 890 mm - Width per module : approx. 989 mm - total width : approx. 2670 mm - total depth : approx. 1095 mm - suitable for 2700 x 1100 mm shelf bays - 1 level consists of 3 pcs. Gratings - Edging : T-profile 42 mm - Mesh size : 80 x 40 mm - Load capacity: 1000 kg per grating, with evenly distributed load - Surface : hot-dip galvanized - New from stock -AVAILABLE SEVERAL TIMES! Price: 189,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, Year of construction: 2002, functionality: fully functional, grinding width: 1,100 mm, overall weight: 6,600 kg, type of input current: three-phase, The machine is in working condition. 2+2 level grinding is possible. Iasdpsyybgrjfx Apcor

Condition: excellent (used), functionality: fully functional, CALIBRATING SANDING machine model DMC TECHNOSAND TC 1350 RRP Iodjyrrr Uspfx Apcjar second hand machine CE standard : YES machine composed by 3 belts ( 3 independent motors ) 1° belt : Roller 2° belt : Roller 3° belt : electronic Sectioned Pad vacuum unit for table maximum working width mm. 1350 volt. 380/50

Condition: used,

Condition: good (used), Year of construction: 2001, * 5 grinding units: - 1 bottom 18.5 kW - 2 lower 15 kW Isdst Hmg Iopfx Apcsar - 3 upper 18,5 kW - 4 upper 15 kW - 5 upper 11 kW * stepless feed regulation on inverter (2x2.2kW) * electric adjustment of table height * pneumatic oscillation * grinding belt blowing

Condition: used, Year of construction: 2005, SECOND-HAND WIDE BELT SANDING MACHINE DMC MOD. TECHNOSAND TC 1100M3 DA MM. 1100 - CE RULES - Rubber roller - 18.5 kw - 90 sh - diam. 250 mm - Rubber roller - 15.0 kw - 70 sh - diam. 250 mm. - Rubber roller - 11.1 kw - 40 sh - diam. 330 mm Ijdpfxsmxggys Apcjar - N. 3 indipendent motors - Working width 1100 mm - Device for short pieces - Year 2005

Condition: used, mileage: 131,688 km, power: 70 kW (95.17 HP), first registration: 03/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,720 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, navigation system, onboard computer, power mirror, sliding door, start-stop system, traction control, = Additional options and equipment = - Attention assist - Automatic dipped headlights - Heated exterior mirrors - Passenger airbag - Carkit - Electric front windows - Driver airbag - Rear doors - Comfort seats - Front head airbags - Front center armrest - Multifunction steering wheel - Multimedia capability - Rear parking sensors - Radio with DAB - Rain sensor - Front side airbags - Right-hand side sliding door - Immobilizer - Thermal glazing - Connected services - Adjustable steering wheel - Partition wall Iaodeyuqpqjpfx Apcer = Further information = General information Number of doors: 5 Technical information Number of cylinders: 4 Engine displacement: 1,461 cc Acceleration (0–100): 13.8 s Top speed: 164 km/h Weights Unladen weight: 1,583 kg Payload: 438 kg Gross vehicle weight: 2,021 kg Interior Interior: black Fuel consumption Average fuel consumption: 5.2 l/100km Maintenance, history and condition Service booklets: Available (dealer-serviced) APK (Roadworthiness test): New TÜV on delivery Number of keys: 2 (2 remote controls)

Condition: excellent (used), CATALOG NO. 7967 Ijdpjy Ddp Dsfx Apcsar TECHNICAL DATA - Maximum working width: 1100 mm - Maximum working height: 170 mm 2 units: 1) Grooved metal roller for calibration 2) Grooved rubber roller + shoe + metal roller – Top side: - Rubber pressure roller - Unit (two units on one motor) 15 kW - Rubber pressure roller - Outfeed rubber roller - Belt cleaning by air blast – Bottom side: - 2 metal pressure rollers - Feed belt - 2 rubber pressure rollers - Pneumatic belt oscillation - Grinding thickness potentiometer - Electric and manual table lifting (for precise adjustment) - Pneumatic brake - 2 feed speed options - Working pressure: 6–8 bar - Extraction nozzle diameter: 2x140 mm - Overall dimensions (L/W/H): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian manufacture – 2 sanding units – Not repainted – Used sander, perfect condition Net price: 77,900 PLN Net price: 18,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary with larger exchange rate fluctuations)

Condition: used, mileage: 19,396 km, power: 70 kW (95.17 HP), first registration: 02/2023, fuel type: diesel, next inspection (TÜV): 04/2028, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, traction control, * Appointment scheduling for consultation and test drive = shorter waiting times: * Time is valuable and shouldn’t be spent waiting. Therefore, we kindly request you to schedule an appointment by phone for consultation or test drives. * Service book * Non-smoker * This vehicle comes with a well-maintained digital service record at Mercedes-Benz. * Last service carried out at 12,227 km. TRANSMISSION / CHASSIS * Panel van * 6-speed manual transmission * Engine 1.5 L – 70 kW CDI KAT APPEARANCE * Seat belt warning system, driver/passenger side * Black textured bumpers * Preparation for roof rails * Paint finish: Arctic White * Black textured sliding door track cover * Black textured grip bar LIGHT & VISIBILITY * Rain / light sensor * LED lighting in cargo area * LED interior lighting * Front LED interior lighting * Exterior mirror indicators in halogen technology ENTERTAINMENT * MBUX multimedia system with DAB * Communication module (LTE) pre-installed for Mercedes me connect * Mercedes me connect Iasdpsyy Hw Aefx Apcsr * Digital radio (DAB) * Smartphone integration * Multifunction steering wheel * Instrument cluster with matrix display * Pre-installation for digital radio * Digital radio reception (DAB) pre-installation * Pre-installation for Remote Service Plus ASSISTANCE SYSTEMS AND SAFETY * Rear-view camera * Driver assistance system: Attention Assist (drowsiness detection sensor) * Start/stop system * Cruise control * Mercedes-Benz emergency call system * Anti-lock braking system (ABS) * Electronic stability program (ESP) * Traction control system (ASR) * Electrically adjustable and heated exterior mirrors, both sides * Hill start assist * Parking brake * Head airbag system (windowbag) * Side airbag (sidebag) and windowbag, front * Electric front windows * Side airbag (sidebag) * Driver and passenger airbags COMFORT * Dual passenger seat * Caluma black fabric * Sliding side door, loading/passenger area right * Rear barn doors without windows (opening angle 180 degrees) * Central locking * Lockable glove compartment * Heat-insulating glazing * Windshield washer reservoir * Plastic flooring in front passenger area MISCELLANEOUS * Labels / documentation in German * Full partition wall * Plywood lining in cargo/passenger compartment * Body / build: panel van * Wooden flooring in cargo area * Low-emission according to Euro 6d standard * Fuel filter with water separator * Soot particle filter * Weight version: 2,027 kg * And much more * The information provided is without guarantee. It does not constitute an agreed quality. Subject to errors and prior sale. * Our services: * Financing available also with no down payment * Registration service * Trade-in of your old car: * Delivery available * Tire service, winter and summer tires available at extra cost * We also speak various languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovakian * We look forward to your visit!

Condition: used, Year of construction: 1999, turning diameter 1100 mm turning length 6000 mm control Siemens 840D turning diameter over slide 740 mm total power requirement 22 kW Year of manufacture 1999 Control: Siemens 840D Turning length (mm) 6000 Max. turning diameter (mm) 1100 Max. turning diameter over slide (mm) 740 Spindle diameter (mm) 105 Speed ??16 - 1800 (18x) kW 22 Voltage 380V Hz 50 3-jaw chuck ø (mm) ¦ 4-jaw chuck ø (mm) ¦ Fixed steady rest ø (mm) 2x Through-spindle cooling ¦ Multifix tool post The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Iaedpfxjyqvphe Apcjr Your Markus Hirsch Team

Condition: used, Year of construction: 1996, turning diameter over bed 1100 mm turning diameter over slide rest 740 mm turning length 6000 mm spindle bore 110 mm turning speeds 16-1600 U/min total power requirement 22 kW weight of the machine ca. 11 t Year of manufacture 1999 Control: Siemens 840D Turning length (mm) 6000 Max. turning diameter (mm) 1100 Max. turning diameter over slide (mm) 740 Spindle diameter (mm) 105 Speed ??16 - 1800 (18x) kW 22 Voltage 380V Hz 50 Iodeyqv Hyepfx Apcear 3-jaw chuck ø (mm) ¦ 4-jaw chuck ø (mm) ¦ Fixed steady rest ø (mm) 2x Through-spindle cooling ¦ Multifix tool post The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, mileage: 116,196 km, power: 75 kW (101.97 HP), first registration: 01/2021, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 01/2027, color: red, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 108 Mercedes-Benz VITO 110 CDI AIR CONDITIONING 3 SEATS 2nd owner. Full service history. Paint code: * 3589 Paint color Jupiter Red MB 3589 Interior trim: * VF4 Caluma fabric, black Equipment: * CF0 Basic chassis * CL4 Multifunction steering wheel with trip computer * D50 Full partition wall * E07 Hill Start Assist * E1D Digital radio (DAB) * E2R Radio generation 2 * E34 Buffer battery for start process * ED4 AGM battery 12 V 92 Ah * EL8 Two-way speakers front * EN6 Audio 10 * EW6 Preparation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * EZ7 Active Park Assist * F447 - * F66 Lockable glove compartment * F68 Exterior mirrors heated and electrically adjustable * FKA Panel van * FY7 Multi-button remote control * GC9 6-speed manual transmission Fsg 350 * H20 All-around heat-insulating glass * HH9 Semi-automatic air conditioning Tempmatic * HI1 Climate zone 1 (cold/comfort) * IB6 Series C447 Vito/V-Class * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IL5 Left-hand drive * IN2 Wheelbase 3200 mm, long overhang * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JK3 Instrument cluster with pixel matrix display * JW8 Attention Assist * JX2 Maintenance interval 40,000 km * KB6 Main fuel tank 57 liters * KP6 Emission control SCR generation 3 * L Left-hand drive * LA2 Light assistant * LC4 Comfort overhead control panel * LE1 Adaptive brake light * LX5 Europe * M44 Generator 14 V/185 A * MG9 Generator management * MJ8 ECO Start-Stop function * MS1 Cruise control * MT2 Emission standard Euro 6D-TEMP N1 * MX0 BlueEFFICIENCY package * MX4 Engine OM622 DE 17 LA 75 kW (102 hp) * Q22 Towbar with fixed ball head * R21 Wheel size group 1 * RF8 Tyres: MICHELIN (80) Isdpfx Apoymvfhscoar * RG1 Tyre size 205/65 R16 * RM7 Summer tyres * RS3 Steel rims 6.5 J x 16 * S23 Dual passenger seat * SA6 Passenger airbag * SB1 Comfort driver's seat * VA2 Load compartment interior trim up to roof height (wood) * VF4 Caluma fabric black * VV9 Mounting points in roof frame * W65 Tailgate * WM0 Model update control code * X30 Registration certificate part 2 * X99 Manufacturer Mercedes-Benz AG * XA6 Weight variant 3.05 t * XC9 COC papers * XM0 Model update * XM8 Development control code * XN0 Model year change G0-II * XO9 Mercedes-Benz Mobilovan with DSB and GGD * XU1 Signs/printed materials in German * XW9 WLTP conversion control code * XZ1 Model generation 1 * Y10 First aid kit * Y44 Warning triangle * Z2K Base * Z41 Registered as truck * ZC5 Sales badge 0 * ZM0 Panel van WARRANTY UP TO 36 MONTHS POSSIBLE. FINANCING AND TRADE-IN POSSIBLE. You can find more vehicles on our homepage:

Condition: good (used), Year of construction: 2010, • Sanding from above and below: with roller and pneumatic sanding shoe units • Double-sided processing of parts: in a single pass • Above-average working speed, reduced workload, excellent surface finish • Working width (mm): 1100 Iodpjw A R U Rjfx Apcoar • Feed: 1.5 kW each via frequency inverter • Height adjustment: 0.75 kW each • PLC Omron • Vacuum: 1.5 kW • Enormatic: Automatic measurement of workpiece thickness, self-adjustment and automatic start of feed and sanding process

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal output modulation —— Technical data: • Year of manufacture: 2012 • Output: 102–109 kW • Firing capacity: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water content: 190 liters • Weight: approx. 1010 kg —— Key features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-adjusted) • Automatic cleaning and ash removal • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic (self-cleaning) grate • Very low power consumption (~0.18 kW) • Modern, energy-efficient system —— Feed technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with automatic pellet suction system (vacuum system / pneumatic feed) ➡️ Pellet operation is very straightforward: • Connection to pellet storage with flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual refueling ➡️ Alternatively, the boiler can also be used for wood chip operation (by connecting a discharge/feeding system for chip storage) —— Condition: • Recently dismantled • In perfect working order until removal Ijdpfxey A Ei Ns Apcoar —— Viewing: Viewing possible by appointment at our 1500 m² warehouse in Mosonmagyaróvár, Hungary

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Iajdpfxjyyyfte Apcor Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Ijdpfx Asvvki Nepcoar Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2005, operating hours: 23,607 h, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis DMC 104 V linear was manufactured in 2005. It features an impressive X-axis travel of 1040 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a robust clamping surface of 1250 mm x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMC 104 V linear vertical machining centre we have for sale. Contact us for further details. Iaedpfx Asyu Sc Sjpcsr • Spindle hours: 12,600 • Tool positions: 30 • Control: iTNC 530 • Clamping surface: 1250 mm x 600 mm • Transport weight: approx. 9.5 t • Control: iTNC 530 Additional equipment • 4th axis: Lehmann EA-420 Technical Specification Taper Size SK 40