Used Dmg Horizontal Turning Machine for sale (69,261)

Year of construction: 2018, condition: ready for operation (used), Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screws), motor spindles with release units (replace bearings/reseal), cross slides (guideways/ball screws/motor), workpiece spindle (replace bearings/reseal), protective enclosure (interior cladding/working area door/repaint machine), coolant pumps, replacement of electrical cables/lubrication and hydraulic lines, as required. An on-site inspection is possible. Lodpfxjztducj Ab Dsag

Year of construction: 1998, operating hours: 1,339 h, condition: ready for operation (used), Control Unit Brand FANUC Model Series 18i-T Main Drive Number of axis 4 Spindle Speed 4000 RPM Tool taper VDI 30 This 4-axis SCHAUBLIN 65 TM-3 was manufactured in 1998. A robust horizontal turning machine, it features a maximum turning diameter of 380mm and a length of 534mm. With a spindle speed and rotating tool speed both up to 4,000 RPM, and a 12-piece turret with driven tools, consider the opportunity to buy this SCHAUBLIN 65 TM-3 horizontal turning machine. Contact us for more information. Application Types Ledpfjx D Itwsx Ab Djag Turning

Year of construction: 2020, operating hours: 6,056 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D General Data Measurements width 3150 Measurements depth 5564 mm Measurements height 2135 mm Machine weight 10000 kg Main Drive Spindle speed range 3600 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 22.5 m/min Ljdpfsx D Iv Esx Ab Doag Z-Axis Rapid Traverse 33 m/min Workpiece Workpiece drm over bed 800 mm Workpiece drm 600 mm Tools Slots in storage 12 This 3-axis horizontal turning machine manufactured in 2020 features a Siemens 840D control and a spindle speed up to 3,600 rpm. It offers a max turning diameter of 600 mm and a length of 2000 mm. Equipped with a chip conveyor, Siemens CELOS control system, and a fume extraction system, it's ideal for complex machining tasks. Consider the opportunity to buy this DMG MORI CTX 2000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 2105 mm Measurements depth 3485 mm Machine weight 7500 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 3500–5000 Spindle bore 61 mm Number of axis 4 Movement X-Axis Movement 530 mm X-Axis Feed Force 0–6000 mm/min X-Axis Rapid Traverse 30 m/min Y-Axis Movement ±70 mm Laedpfx Abex D N Ipo Deg Y-Axis Feed Force 0–6000 mm/min Y-Axis Rapid Traverse 15 m/min Z-Axis Movement 1065 mm Z-Axis Feed Force 0–6000 mm/min Z-Axis Rapid Traverse 33 m/min Tail Stock Pinol diameter 80 mm Pinol way 870 mm Pinol tool taper MK4 Tools Number of station 20 Max weight 7 kg Max tool diameter 90 mm Max tool length 250 mm This 4-axis Mazak INTEGREX 200 Y was manufactured in 2000. It features a maximum turning diameter of 540 mm, a swing diameter of 540 mm, and a bar diameter capacity of 51 mm. The machine supports a workpiece weight up to 150 kg and offers a spindle speed range up to 5,000 rpm. It includes a Mazak KM 63 quick change tool system with 20 slots. If you are looking to get high-quality turning capabilities, consider the Mazak INTEGREX 200 Y machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand MITSUBISHI Model M70 Lasdpfxex D Ifto Ab Djg Main Drive Number of axis 6 Spindle Speed 4000 RPM Technical Specification Counter Spindle yes Driven Tools yes This 6-axis Quick-Tech i60 twin was manufactured in 2016, featuring a CNC turning center with B-axis and driven tools. It includes a main spindle bore of 60 mm, sub spindle bore of 42 mm, and a maximum turning length of 300 mm. The machine offers 4-axis simultaneous machining, full axis programming, and a Mitsubishi M70 control system. Consider the opportunity to buy this Quick-Tech i60 twin horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 2620 mm Measurements depth 4865 mm Machine weight 11700 kg Control Unit Brand OKUMA Model n/a Main Drive Spindle speed range 3500 Tool taper ASA 8 Number of axis 2 Movement X-Axis Movement 230 mm Ljdjx D R Rfopfx Ab Doag Z-Axis Movement 670 mm Turret Tool taper VDI 40 This 3-axis Okuma LB 25 II-M was manufactured in 1998. A robust horizontal turning machine featuring an Okuma OSP 5020L control, it offers a spindle speed of 3,500 rpm and a 12-position tool turret. It handles a max workable diameter of Ø 420 mm and lengths up to 1,250 mm. Consider the opportunity to buy this Okuma LB 25 II-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2018, operating hours: 5,080 h, condition: ready for operation (used), General Data Machine weight 4700 kg Measurements height 1852 mm Dimensions Machine Length 1928 mm Control Unit Brand SIEMENS Model 840D Main Drive Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 16.5 kW Movement X-Axis Movement 242.5 mm Z-Axis Movement 540 mm Y-Axis Movement 80 mm Lsdpfx Absx D Huao Djag Technical Specification Driven Tools yes This 3-axis DMG CLX 350 V4 was manufactured in 2018 and features a max turning diameter of 320 mm, spindle speed up to 5,000 rpm, and a bar capacity of Ø 65 mm. It includes a VDI 30 turret with 12 stations for driven tools, enhancing versatility. Ideal for precision turning with rapid traverse rates and Siemens 840D sl control for advanced operations. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 56.604, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Supply voltage: 400 V AC Lajdpfxozzbcyj Ab Djg Rated current: 29 A Number of phases: 3 Power: 17.1 kW Frequency: 50 Hz Short-circuit interrupting capacity: 10 kA RMS symmetrical EQUIPMENT Drilling tool Saw unit Vacuum pump Tools

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,222 h, functionality: fully functional, machine/vehicle number: KH630338, travel distance X-axis: 950 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 760 mm, controller model: Fanuc Series 18i-MB, spindle speed (max.): 4,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances Travel distance X-axis: 950 mm Travel distance Y-axis: 825 mm Travel distance Z-axis: 760 mm Working area max.: Ø 1,120 × 875 mm Distance from table surface to spindle center: 175–935 mm Distance from table center to spindle nose: 0–825 mm Lodpfx Aboztpixo Djag Spindle Spindle mounting: NT50 Spindle speed: 4,500 rpm Spindle motor power: 22 kW Gear stages: 2 Cooling: Cooling through the spindle Pallet Pallet size: 630 × 630 mm Maximum pallet load: 1,000 kg Tool changer Tool positions: 40 Maximum tool diameter: Ø 110 mm Tool diameter without neighboring tool: Ø 245 mm Maximum tool length: 600 mm Maximum tool weight: 20 kg Tool change time tool-to-tool: 6 s MACHINE DETAILS Control: Fanuc Series 18i-MB Operating hours (as of 05/12/2026) Power-on hours: 71,457 h Operating hours: 28,051 h Spindle running time: 13,222 h Dimensions & Weight Dimensions (L x W x H): 3,610 x 5,320 x 3,140 mm Machine weight: 14,000 kg Weight of dual pallet changer: 2,000 kg Total weight: 16,000 kg EQUIPMENT Dual pallet changer Spindle cooling Oil cleaner Chip conveyor Cooljet Systems oil cooler Tools in the machine Tools on 2 tool carts Operating manuals Parameter backup on USB stick Note: The machine is in operation until disassembly. Before collection, it will be disconnected from the power supply, and the oil will be drained. The backup batteries were replaced on 06/01/2023. In addition, an updated parameter backup will be created before the power is shut off.

Condition: excellent (used), Year of construction: 2019, 2019 Starrag NB251 CNC Blisk Horizontal 5 Axis Simultaneous Machining Centre With Siemens 840D Control Laedpjz Dg Taefx Ab Dsg Maximum Blisk Ø750mm. Axis Travel 'X'=700mm, 'Y'=400mm, 'Z'=400mm, 'A'=360° (Endless), 'B'=± 87°. Rapid Traverse 'X'=62m/min, 'Y'=62m/min, 'Z'=62m/min, 'A'=200rpm, 'B'=60rpm. Maximum Spindle Speed 18,000rpm (28kW Motor), Torque at 100% Duty 181Nm. Spindle Taper HSK-A63. 62 Position ATC. Maximum Tool Ø150mm, Maximum Tool Length 250mm, Maximum Tool Weight 6.5kg. Tool Change Time Double Gripper 8sec. S/No. 8404 (2019). With Knoll Through Coolant Paper Filtration System, Knoll 450-K1 Chip Conveyor, Blum Laser Tool Setter, Renishaw Spindle Probes, Starrag Chiller Unit, Wash Gun, Swarf Bin, Handwheel & Manuals. Overall Dimensions L5,000 x W3,260 x H3,200mm. Weight 12,000kg.

Condition: excellent (used), Year of construction: 2024, 2024 Oturn CV500 5 Axis Machining Centre With Siemens One Control Rotary Table Dimension Ø500 x 400mm (5 'T' Slots). Maximum Table Load 200kg. Axis Travel 'X'=700mm, 'Y'=600mm, 'Z'=500mm. Axis Rapid Feeds 'X'=36m/min, 'Y'=36m/min, 'Z'=36m/min, 'A'=60rpm, 'C'=60rpm. Cutting Feed Range 1-24,000mm/min. Spindle To Table Distance Min/Max 130-630mm. Distance From Spindle Centre To Column Guide Rail Surface 628mm. Maximum Spindle Speed 12,000rpm (22.5kW Motor). Spindle Taper BT 40. Maximum Tool Ø70/120mm (Non Adjacent Tool), Maximum Tool Length 300mm. Maximum Tool Weight 8kg. 24 Station ATC. Tool Change Time 4sec. Positioning Accuracy ±0.005/300mm, Repeatability ±0.003/300mm. S/No. MY0025-000027 (2024). This item will be loaded to buyer's vehicle, a loading charge of £200 + VAT will be added to the buyer's invoice. Lajdpfxez Dg Dfe Ab Djg With Coolant System, Chip Conveyor, Renishaw Omi-2 Spindle Probe Interface, Renishaw TS27R Toolsetter, Water Chiller, Wash Gun, Air Gun, Handwheel Signal Tower & Swarf Bin. Overall Dimensions W2,884 x D2,612 x H3,303mm. Please note: This item will be loaded to buyer's vehicle, a loading charge of £200 + VAT will be added to the buyer's invoice.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 157152, MAZAK FH-6800 – Technical Specifications Manufacturer: Mazak Model: FH-6800 Ledpoz D Azysfx Ab Dsag Year of manufacture: 2001 Machine type: Horizontal CNC Machining Centre CNC control: MAZATROL PC-FUSION 640M Number of axes: 4-axis Working range • X-axis travel: 1,050 mm • Y-axis travel: 800 mm • Z-axis travel: 880 mm • Pallet size: 630 × 630 mm • Pallet load capacity: approx. 1,500 kg • B-axis: 360° indexing • B-axis resolution: 0.001° Spindle • Spindle taper: CAT 50 • Maximum spindle speed: 7,000 rpm • Spindle motor: approx. 37 kW • High-pressure coolant through spindle: Yes, documented at 70 bar on one 2001 specification sheet Tool changer • Tool magazine capacity: 120 tools • Tool holder: CAT 50 • Automatic Tool Changer (ATC): 120 stations

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Urban SV 530 with a turning station, configured to process from right to left, in very good condition, complete with internal and external tools for finishing PVC profiles. Upon request, we can install the machine and program it for your specific profile. Laodpfx Aboz D Ilde Deg

Condition: used, Year of construction: 2006, Okuma Space Centre MA-600HB Horizontal Twin Pallet Machining Centre with Okuma OSP-P200M CNC Control System. Serial No. 1296158 (2006), X Axis = 1,000mm, Y Axis = 900mm, Z Axis 1,000mm, Spindle Nose NT 50, Spindle Speed Std 6,000rpm, Spindle Drive VAC 30/22kw, Pallet Size 630 x 630mm, Max Weight on Pallet 1200kg, Pallet Indexing 1 deg, Pallet Change Time 11 seconds, Max Work Piece Size Ø 1,000 x 900 High, Axis Drives Feed Rate X, Y, Z Axis 1 - 60,000mm/min, Rapid Traverse X, Y, Z Axis 60,000mm/Min, Automatic Toolchanger No. of Tools 40, Floor Space 3,380 x 6,140mm, Machine Weight 24,000kg Approx. Qty of 50 INT Spindle Tools (Back End Only). Country of Origin: Japan Ljdpfx Ajz Arzvob Doag Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Stahl Autocast 42 x 42SP, Tilt & Pour Casting Turning Machine. S/No. 87699 36. S/No. Country of Origin: U.S.A. Lsdpfx Abez Akbue Dsag Location: These lots are located in Warwick, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2003, x-travel 1250 mm y-travel 500 mm Lajdpfx Aez D Iu Eob Djg z-travel 500 mm Control Heidenhain tnc 124 serial number 5277 table size 1800 - 360 mm taper ISO 50 weight of the machine ca. 3 t

Year of construction: 1992, condition: used, Power: 80 kW (109 HP) Number of cylinders: 6 Dimensions (LxBxH): 750 x 245 x 280 cm Lasdpfxez Df Rqj Ab Djg Track width: 4 cm Crane: Yes Serial number: 65539 Anchor Drilling Rig Hour meter reading: 11,385H Drill mast: • Type: 200V • Mast length: 6,000 mm Double drill head Drill motor 1 • Type: KH13 Drill motor 2, for hammer rods • Type: KD1011 Equipped with a crane • Brand: Hiab • Type: 020 Engine: • Brand: Deutz • Engine power: 109 kW • Number of cylinders: 6 Track width: 400 mm Overall dimensions: 7,500 x 2,450 x 2,800 mm Remarks: signs of wear Online auction of drilling, foundation and heavy construction equipment, including a 2014 COMACCHIO MC28 HT multifunctional ground drilling rig, 1992 KLEM KR806D horizontal drilling machine, 1977 AMERICAN HOIST 9299 dragline, NOBAS UB35S and NOBAS UBI254 draglines, and a 2001 LIEBHERR A310B wheeled excavator. The machines originate from a foundation and marine construction environment and are suitable for contractors, drilling and piling companies, crane and dragline specialists, exporters, resellers and buyers of heavy construction machinery. The online auction opens Thursday 17 September and closes Tuesday 6 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 2 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 2001, HÜLLER HILLE NBH 95 CNC Horizontal Machining Center with FASTEMS Pallet Automation Machine has perfect geometry Well-maintained with service records Manufacturer: HÜLLER HILLE Model: NBH 95 Machine type: CNC Horizontal Machining Center Year of manufacture: 2001 Control: SIEMENS SINUMERIK 840D POWER LINE TECHNICAL DATA Travel X-axis: 630 mm Travel Y-axis: 630 mm Travel Z-axis: 630 mm Machining position: horizontal Number of CNC axes: 4 B-axis: NC rotary table B-axis: 360° Pallet size: approx. 400 x 500 mm Automatic pallet changer: yes Tool interface: HSK-A63 Tool magazine: 100 tool positions Automatic tool change: yes CNC CONTROL Lajdpfjz D Il Rsx Ab Dog SIEMENS SINUMERIK 840D AUTOMATION FASTEMS Pallet Automation System Automatic pallet rack Automatic storage and retrieval system / pallet handling 20 base pallets suitable for the machine Multi-level pallet rack Automatic loading and unloading of the machine Separate FASTEMS control Separate control cabinets Complete protective fencing / safety enclosure COOLANT SYSTEM Separate coolant system Coolant tank Band filter system Manufacturer of the coolant system: Bürener Maschinenfabrik GmbH Year of manufacture of the coolant system: 2001 Electrical data of the coolant system: Connection voltage: 400 V / 50 Hz Control voltage: 24 V DC Power: 10 kW Rated current: 23 A Max. fuse: 35 A CHIP DISPOSAL Chip conveyor available Automatic chip removal Coolant return to the filter system ELECTRICAL DATA MACHINE Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V AC Valve voltage: 24 V DC Total rated current: 80 A Supply line fuse: 100 A EQUIPMENT 100-position tool magazine HSK-A63 tool interface NC rotary table / B-axis FASTEMS pallet rack system 20 base pallets Automatic pallet handling Coolant tank Band filter system Separate coolant system Chip conveyor Machine enclosure Complete safety fencing for the automation Separate control cabinets Machine control panel FASTEMS operating/control system Signal lights Automated material flow between pallet storage and machine CONDITION The machine was in continuous production use until just before the sale. The last workpieces are currently still being produced on the machine. The machine can be demonstrated and inspected while powered on. According to the operator, the machine geometry is in perfect condition. Videos of the machine in operation are available. SCOPE OF DELIVERY HÜLLER HILLE NBH 95 100-position tool magazine FASTEMS pallet automation 20 base pallets Pallet rack Pallet handling system Coolant tank Band filter system Coolant system Chip conveyor Control cabinets Protective fencing Existing machine-related peripherals

Condition: used, Year of construction: 2000, grinding length 600 mm grinding width 400 mm workpiece height 375 mm table adjustment - longitudinal max. 660 mm table cross movement max. 410 mm distance spindle center to table max. 525 mm Ljdez D Itnjpfx Ab Deag table speeds 2 - 28 m/min table load max. 400 kg cross feed of table intermittent 3 - 40 mm rapid traverse cross 1 m/min grinding wheel size max. 300 x 50 x 76,2 mm total power requirement 8 kW weight of the machine ca. 2,1 t dimensions of machine L x W x H 2,75 x 1,7 x 2,42 m Accessories: magnetic plate 600 x 400 mm, grinding wheel with flange, 1 flange separate, DRO on Y-axis (vertical), wheel trueing attachment, balancing scale, wet grinding attachment

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Door interlock switches, Safety light curtain, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Ledjytcl Iepfx Ab Dsag

Condition: reconditioned (used), QUASER MV204 CNC Vertical Machining Centre Lasdpfx Aszzymkjb Deg Year 2016 Control FANUC 31i-B Table size 700 x 1400 mm Table load 1800 kg Travels XYZ 1270 x 700 x 610 mm Spindle nose to table 150 - 750 mm Spindle speeds to 12000 rpm Spindle taper BT 40 Spindle motor TBC Number of tools 30 ATC Rapid traverse X, Y, Z 36 m/min Weight 10100 kg Supplied with: Swarf Conveyor, Spindle Chiller, Filtermist FX7002, Tooling Package. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27001 Machine Serial Number: 113L160588 Cost: £34,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2015, functionality: fully functional, total height: 3,500 mm, total length: 5,900 mm, total width: 4,000 mm, SW Swabian Machine Tools BA W08-22 CNC control system: Siemens SINUMERIK 840 D sl Work area X-axis: 800 mm Y-axis (swiveling): 900 mm (1,200 mm) Z-axis: 660 mm Spindle distance, fixed (variable)*: 800 mm (799 mm - 851 mm) Workpiece clamping Swiveling table/counter bearing with helical gearing: swiveling time 0/180°: approx. 5.0 s A- and U-axes, prepared for mounting of clamping bridges, up to max.: Ø 950 mm x 1,830 mm Drive system: Torque motor Transport load: 2 x 800 kg Speed range A-, U-axes: 1 - 40 min-1 Working spindle HSK-A80 Speed range: 1 - 12,500 min-1 Acceleration time 0 - nmax: < 0.9 s Spindle bearing diameter: 90 mm Power / torque (10% duty cycle): 2 x 42 kW / 2 x 200 Nm (10% duty cycle) Feed drive Drive system: Linear motor Rapid traverse X / Y / Z: 120 m/min Axis acceleration X / Y / Z: 11 / 11 / 22 m/s2 Max. feed force X / Y / Z: 2 x 8,000 / 16,000 / 2 x 8,000 N Accuracy Position measurement: Direct, absolute Position tolerance X / Y / Z: Tp = ≤ 0.006 mm Repeatability R (ISO 230-2) ≤ 0.004 mm Tool magazine Tool changing system: Pick-Up Capacity: 2 x 42 (2 x 70 / 2 x 91 / 2 x 126)* Max. tool Ø: 85 / 200 mm (-o-) Max. tool length: 550 mm Max. tool weight: 12 / 18 kg Tool change chip-to-chip time: approx. 3.00 s Weight / Dimensions Machine weight: approx. 24,000 kg Transport dimensions W x H x D: 4.00 m x 3.5 m x 5.70 m Installation dimensions W x H x D: 5.35 m x 4.20 m x 8.20 m Connection power Operating voltage: 3 x 400 Volt, 50 Hz, TN-S/TN-C network Total connection power: approx. 152 kVA Average air consumption: 0.6 Nm³/min (5.5 bar) Several machines are available. The machines were integrated into an automated system. They were loaded by a robot system. They were connected to a central coolant system. Therefore, these machines do not have their own coolant system. Laodpfoz D Ey Eox Ab Deg Chips were also removed via a central disposal system.

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, 4-axis machine Lodpfx Aez D Dbhob Dsag X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Rotary table, swiveling: 360 degrees Operating hours: 55,000 h Tool holder: HSK 63 Spindle speeds: 20,000 rpm Torque at the spindle: 85 Table size: 400 x 500 mm Table load capacity: 0.5 t Chain magazine: 60 positions Chip conveyor Pallet changer Coolant filtration system High-pressure coolant through the spindle

Condition: used, Year of construction: 2010, honing diameter 54 mm Laedpfx Aovk Nkueb Dsg stroke 99999 mm centre height 9999 mm Control FANUC CNC Ball and spherical honing machine

Condition: used, OKK HM 4 is a horizontal machining center designed for precision, high accuracy and reliability. Working capacity: table 400×400 mm, travels X 560, Y 510, Z 560 mm; workpiece up to 620×620×700 mm, table load 400 kg. Key specs: spindle ISO 40 100–12,000 rpm (stepless), max torque 150 Nm, feed 1–40 m/min, rapid 40 m/min, spindle nose‑to‑table 150–710 mm; machine size L2100×W3995×H2884 mm. Equipment: 60‑station tool magazine, tool Ø 82 mm (140 with free adjacent pockets), length 300 mm, max tool weight 8 kg, tool change 1 s, chip‑to‑chip 3.4 s, automatic pallet changer (2), pallets 8, coolant 400 L with 20 bar through‑spindle, status light. Delivers tight tolerances; ideal for automotive, aerospace, medical, watchmaking and machine tool sectors. Laedjz Dv Akopfx Ab Dsg